☆ 4.6 Article

Study of the physicochemical and transport performance of neat Matrimid 5218 membrane with nanoparticles: A molecular dynamics simulation

ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS (2023)

Related references

Note: Only part of the references are listed.

Article Biochemical Research Methods

Surface wettability of various phases of titania thin films: Atomic-scale simulation studies

Peng Zhu et al.

Summary: In this paper, the wettability of different phases of TiO2 thin films was studied using molecular-dynamics simulation. The results showed that the contact angle decreased with increasing interaction energy between water and the titanium dioxide interface. The structural connection and arrangement of surface microtopography directly affected the wettability.

JOURNAL OF MOLECULAR GRAPHICS & MODELLING (2023)

Add to Collection

Article Engineering, Multidisciplinary

Mathematical modeling of heterogeneous metal foams for phase-change heat transfer enhancement of latent heat thermal energy storage units

Mehdi Ghalambaz et al.

Summary: Embedding phase change material in metal foams can improve the heat transfer characteristics of a thermal energy storage device. This study investigates the melting heat transfer of phase change materials embedded in a heterogeneous metal foam and finds that increasing heterogeneity can enhance heat transfer rate and shorten melting time.

APPLIED MATHEMATICAL MODELLING (2023)

Add to Collection

Article Engineering, Mechanical

Anisotropic metal foam design for improved latent heat thermal energy storage in a tilted enclosure

Mehdi Ghalambaz et al.

Summary: Metal foams with engineered local properties can enhance heat transfer in latent heat thermal energy storage (LHTES) units. However, the use of anisotropic metal foams for thermal energy storage has not been studied. This research mathematically modeled an anisotropic metal foam and simulated the phase transition behavior of a copper-coconut oil LHTES unit. The results showed that the anisotropic angle significantly affected the thermal energy storage power, and an optimum tilt angle of -45 or +45 along with zero anisotropic angle achieved the maximum charging power.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2023)

Add to Collection

Article Chemistry, Physical

Study of modified PVDF membranes with high-capacity adsorption features using Quantum mechanics, Monte Carlo, and Molecular Dynamics Simulations

Iman Salahshoori et al.

Summary: Appropriate management of petrochemical wastewater is crucial to prevent water pollution. One research area focuses on using super hydrophilic membranes with superoleophobicity to separate emulsified oil from water. Molecular simulations, including molecular dynamics, Monte Carlo, and quantum mechanics simulations, were employed to investigate the adsorption behavior of neat and modified PVDF membranes. The results indicated that PVDF-(PEGMA-co-BVIm-Br) is a suitable adsorbent for water due to its effective electron transfer capability.

JOURNAL OF MOLECULAR LIQUIDS (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Insights into the morphology and gas separation characteristics of methylene diisocyanate (MDI)- functionalized nanoTiO2 polyurethane: quantum mechanics and molecular simulations studies

Iman Salahshoori et al.

Summary: This study investigated the gas separation behavior and morphological characteristics of mixed matrix membranes based on TiO2-poly-urethane and methylene diisocyanate-TiO2-poly-urethane using quantum mechanics, Monte Carlo, and molecular dynamics simulations. The results showed that the mixed matrix membranes exhibited improved physicochemical properties.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

Add to Collection

Article Engineering, Environmental

Facile manufacture of COF-based mixed matrix membranes for efficient CO2 separation

Yahui Zhang et al.

Summary: This study describes a new strategy for the facile manufacture of 2D-COF based mixed-matrix membranes, showing remarkable permeability and selectivity for CO2 separation. The resulting membrane exhibits exceptional long-term operational stability and great potential for industrial gas separations, surpassing known upper-bound limits for polymer membranes.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Physical

Thermophysical properties of water, water and ethylene glycol mixture-based nanodiamond + Fe3O4 hybrid nanofluids: An experimental assessment and application of data-driven approaches

Zafar Said et al.

Summary: This paper investigates the thermophysical properties of water, water and ethylene glycol mixture-based nanodiamond + Fe3O4 hybrid nanofluids using experimental and numerical methods. The study proposes data-driven models, namely Multivariate linear regression (MLR) and Multivariate linear regression with interaction (MLRI) models, to predict the properties. Results show that the hybrid nanofluids exhibit higher thermal conductivity and viscosity compared to the base fluids, and the data-driven models outperform the empirical correlations in predicting the properties.

JOURNAL OF MOLECULAR LIQUIDS (2022)

Add to Collection

Article Engineering, Multidisciplinary

Estimating the density of hybrid nanofluids for thermal energy application: Application of non-parametric and evolutionary polynomial regression data-intelligent techniques

Mehdi Jamei et al.

Summary: In this study, different machine learning models were compared to predict the density of various nanofluids in thermal energy applications. The results demonstrated that the MARS model outperformed the others.

MEASUREMENT (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Free Energy Surfaces and Barriers for Vacancy Diffusion on Al(100), Al(110), Al(111) Reconstructed Surfaces

Junais Habeeb Mokkath et al.

Summary: In this study, Metadynamics simulations were used to investigate the diffusion of vacancies on different Al surfaces. The results showed that each surface exhibited unique characteristics in terms of vacancy diffusion, providing valuable insights for understanding surface vacancy diffusion on technologically relevant Al surfaces.

NANOMATERIALS (2022)

Add to Collection

Article Energy & Fuels

Applying Bayesian Markov chain Monte Carlo (MCMC) modeling to predict the melting behavior of phase change materials

Marjan Goodarzi et al.

Summary: By utilizing Bayesian inference, this study provided accurate models for predicting the melting characteristics in PCM spherical heat storage units. Evaluation of the models' statistical performance showed that model #4 performed the best in predicting the melting rate, while model #5 excelled in predicting the surface-averaged Nusselt number.

JOURNAL OF ENERGY STORAGE (2022)

Add to Collection

Article Polymer Science

Elevated performance of the neat, hybrid and composite membranes by the addition of nanoparticles (ZIF-67): A molecular dynamics study

Iman Salahshoori et al.

Summary: Composite membranes formed by blending poly(ether-block-amide) and polyethersulfone, combined with novel metal-organic frameworks such as ZIF-67, show promising results in gas separation applications. The addition of ZIF-67 particles improves the amorphous state, glass transition temperature, and fractional free volume of the membranes, enhancing their thermal resistance and transport properties. Mixed matrix membranes filled with ZIF-67 particles exhibit significantly improved CO2 permeability and selectivity compared to neat and composite membranes, showing potential for industrial applications like natural gas treatment.

POLYMER BULLETIN (2022)

Add to Collection

Article Engineering, Chemical

The potential of calixarenes for membrane separation

Tai-Shung Chung et al.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2022)

Add to Collection

Article Engineering, Chemical

Fabrication of a flexible hydrogen-bonded organic framework based mixed matrix membrane for hydrogen separation

Wei Li et al.

Summary: Hydrogen-bonded Organic Frameworks (HOFs) are novel materials with ordered and flexible porous frameworks, considered promising for gas separation membranes. The HOF-30@PI MMM showed high hydrogen permeability and stability, making it an excellent option for gas separation applications.

JOURNAL OF MEMBRANE SCIENCE (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Metal-Organic Frameworks (MOFs)-Based Mixed Matrix Membranes (MMMs) for Gas Separation: A Review on Advanced Materials in Harsh Environmental Applications

Shu Hua Goh et al.

Summary: This article reviews the development of MOFs-based MMMs in the past 3 years, discussing gas transport estimation models, preparation methods, and challenges in developing MMMs. The application and separation performance of various MOFs-based MMMs, including those using advanced MOFs materials, are summarized. The latest exploration of MOF materials for harsh operating conditions is emphasized. The outlook and future opportunities of MMMs are contemplated.

SMALL (2022)

Add to Collection

Article Engineering, Multidisciplinary

Effects of baffles and vortex generators on cooling performance of a gas turbine combustion chamber: Numerical assessment

Hamed Arjmandi et al.

Summary: The numerical study on the effect of using baffles and vortex generators in a gas turbine combustion chamber shows that they can significantly improve cooling performance and reduce the external wall temperature.

ALEXANDRIA ENGINEERING JOURNAL (2022)

Add to Collection

Article Biochemistry & Molecular Biology

Surface Modification of Matrimid® 5218 Polyimide Membrane with Fluorine-Containing Diamines for Efficient Gas Separation

Tae Hoon Lee et al.

Summary: Polyimide membranes have been extensively studied for gas separation applications due to their high separation abilities and excellent processability. Diamine modification can be used to tune the separation performance, and fluorinated modifiers have been found to improve the chain packing modes of the membranes, leading to higher gas permeability and selectivity.

MEMBRANES (2022)

Add to Collection

Article Energy & Fuels

Experimental study on the thermal properties of Al2O3-CuO/water hybrid nanofluids: Development of an artificial intelligence model

Hallera Basavarajappa Marulasiddeshi et al.

Summary: In this study, Al2O3 and CuO nanoparticles were synthesized using a novel sol-gel method, and water-based Al2O3 and Al2O3-CuO nanofluids were produced. The viscosity and thermal conductivity of the nanofluids were determined, and the results showed significant enhancements in both properties for the hybrid nanofluid compared to the Al2O3 nanofluid.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2022)

Add to Collection

Article Materials Science, Multidisciplinary

A novel material based on an antibacterial choline-calixarene nanoassembly embedded in thin films

Loredana Ferreri et al.

Summary: Supramolecular chemistry is used to embed an amphiphilic choline-calix[4]arene with antibacterial properties in polymeric thin films. The developed films exhibit antibacterial activity against Escherichia coli and Staphylococcus aureus, and also have increased crystallinity, wettability, and gas permeability.

JOURNAL OF MATERIALS SCIENCE (2022)

Add to Collection

Article Engineering, Multidisciplinary

Novel design of a liquid-cooled heat sink for a high-performance processor based on constructal theory: A numerical and experimental approach

Kittipong Sakamatapan et al.

Summary: This study presents a novel liquid-cooled heat sink based on constructal theory and investigates the influence of boundary conditions on heat transfer and pressure drop through experiments and numerical simulation. The results show that increasing the number of clusters can improve heat transfer efficiency, providing reference for the thermal management systems of next-generation compact heat sources.

ALEXANDRIA ENGINEERING JOURNAL (2022)

Add to Collection

Article Thermodynamics

Improving the thermal efficiency of a solar flat plate collector using MWCNT-Fe3O4/water hybrid nanofluids and ensemble machine learning

Zafar Said et al.

Summary: The thermal performance of a flat plate solar collector using MWCNT + Fe3O4/Water hybrid nanofluids was examined, and the impact of nanofluid concentrations and flow rates on heat transfer coefficient and pressure drop was investigated. Prediction models were developed to improve heat transfer, Nusselt's number, friction factor, and thermal efficiency using Boosted Regression Tree (BRT) and Extreme Gradient Boosting (XGBoost) techniques. The statistical analysis and comparison showed the superiority of XGBoost over BRT.

CASE STUDIES IN THERMAL ENGINEERING (2022)

Add to Collection

Article Mathematics, Applied

Nonsimilar modeling and numerical convective transport analysis of forced flow of radiative Carreau nanofluid with zero mass flux boundary condition

Ammarah Raees et al.

Summary: This research focuses on the nonsimilar analysis of non-Newtonian nanofluids under thermal radiations in different geometrical configurations. By employing numerical algorithms and the local nonsimilarity approach, the effects of various parameters on fluid velocity, thermal, and concentration profiles are calculated and compared. This study provides valuable insights for future industrial and engineering applications of nanofluids.

ZAMM-ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK (2022)

Add to Collection

Article Environmental Sciences

Deep Q-Value Neural Network (DQN) Reinforcement Learning for the Techno-Economic Optimization of a Solar-Driven Nanofluid-Assisted Desalination Technology

Sina Jafari et al.

Summary: This study focuses on optimizing a solar-driven desalination system using nanofluid to improve the efficiency and cost-effectiveness. Experimental results show that the nanofluid solar still system has higher water production, efficiency, and lower cost compared to the traditional water still system.

WATER (2022)

Add to Collection

Article Thermodynamics

Investigation of an integrated thermochemical hydrogen production and high temperature solar thermochemical energy storage and CO2 capture process

Asal Sami et al.

Summary: The study introduces a novel hydrogen production system that integrates the zinc-sulfur-iodine hydrogen production system with a heliostat solar collector and thermochemical energy storage, allowing for the production of clean hydrogen and improved process efficiency. Simulations show that the system has a high efficiency, with a solar fraction of 75.46% and reduced external energy demand.

APPLIED THERMAL ENGINEERING (2022)

Add to Collection

Review Thermodynamics

A review on evaporation improvement of solar still desalination using porous material

Shahin Shoeibi et al.

Summary: In recent years, there has been a focus on using solar energy sources for desalination systems due to their low energy costs, feasibility in most weathers, and lack of reliance on fossil fuels. The use of porous materials in these systems has been found to have a significant impact on the evaporation rate.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2022)

Add to Collection

Article Chemistry, Physical

A deep insight of solubility behavior, mechanical quantum, thermodynamic, and mechanical properties of Pebax-1657 polymer blends with various types of vinyl polymers: A mechanical quantum and molecular dynamics simulation study

Iman Salahshoori et al.

Summary: In this study, molecular dynamics simulation was used to analyze the compatibility, miscibility, and mechanical behavior of different combinations of Pebax-1657 and three vinyl group polymers. The results showed that PVC and PVAc were the most polarizable and had the lowest chemical reactivities, while PVF and PVC had the highest and lowest chemical hardness values, respectively. The solubility parameters indicated that PVAc, PVC, and PVF were miscible with Px and reached the same glass transition temperature. The v (chi) parameters suggested that Px-PVAc and Px-PVF exhibited high and low miscibility, respectively. The mechanical properties of the blend polymers decreased when the content of PVAc, PVC, and PVF exceeded 30% wt.

JOURNAL OF MOLECULAR LIQUIDS (2022)

Add to Collection

Article Chemistry, Physical

Copper (II) oxide nanoparticles as additives in RBD palm olein: Experimental analysis and mathematical modelling

A. G. N. Sofiah et al.

Summary: In this study, CuO nanoparticles were used as nano-additives in biodegradable and eco-friendly palm olein base fluids. The dispersion behavior and thermophysical properties of the formulated nanofluids were evaluated. The results showed that CuO/RBD palm olein nanofluids exhibited good stability and enhanced thermal conductivity.

JOURNAL OF MOLECULAR LIQUIDS (2022)

Add to Collection

Article Energy & Fuels

Phase change heat transfer and energy storage in a wavy-tube thermal storage unit filled with a nano-enhanced phase change material and metal foams

Mohammad Ghalambaz et al.

Summary: Latent heat thermal energy storage plays a key role in thermal management and renewable systems. However, the poor heat transfer characteristics of latent heat thermal energy storage units hinder their performance. Researchers have explored various heat transfer enhancement approaches, such as using nano additives, metal foams, and extended, wavy surfaces. This study investigates the impact of using wavy tubes in a composite phase change material and metal foam latent heat thermal energy storage unit, and explores the influence of different factors, including nanoparticle volumetric fraction, tube wave amplitude, tube wave number, and porosity coefficient, on the charging time, stored energy, and heat transfer behavior of the unit.

JOURNAL OF ENERGY STORAGE (2022)

Add to Collection

Article Energy & Fuels

Exploring the specific heat capacity of water-based hybrid nanofluids for solar energy applications: A comparative evaluation of modern ensemble machine learning techniques

Zafar Said et al.

Summary: This study examines the usefulness of three machine learning approaches (Gaussian process regression, extreme gradient boosting, and support vector machine) in estimating the specific heat capacity of nanofluids. The results show that all three methods can accurately predict the specific heat capacity of nanofluids, providing an alternative to time-consuming and expensive experimental approaches.

JOURNAL OF ENERGY STORAGE (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Selective gas adsorption by calixarene-based porous octahedral M32 coordination cages

Ivan V. Khariushin et al.

Summary: Giant octahedral M-32 coordination cages were synthesized through self-assembly using sulfonylcalix[4]arene-supported tetranuclear M(ii) clusters (M = Co, Ni) and hybrid linker based on tris(dipyrrinato)cobalt(iii) complexes appended with peripherical carboxylic groups. These solid-state supramolecular architectures demonstrated excellent performance as adsorbents for the separation of industrially important gas mixtures due to their intrinsic and extrinsic porosity.

CHEMICAL COMMUNICATIONS (2022)

Add to Collection

Article Engineering, Chemical

Smart light-responsive hierarchical metal organic frameworks constructed mixed matrix membranes for efficient gas separation

Qingping Xin et al.

Summary: A new type of light-responsive hierarchical metal organic framework (MOF) has been prepared using microwave method. Mixed matrix membranes (MMMs) incorporating the MOF exhibit improved selectivity for CO2/N-2 separation.

GREEN CHEMICAL ENGINEERING (2022)

Add to Collection

Article Thermodynamics

High-temperature hydrogen production by solar thermochemical reactors, metal interfaces, and nanofluid cooling

Mehdi Mehrpooya et al.

Summary: Solar thermochemical reactors are considered for converting solar energy into solar fuel by adjusting the size of solar concentrator. In this study, the sizing of the solar concentrator is studied using Monte Carlo method to determine the best cavity size. The reactor converts intermediate metal to solar fuel and factors like heat transfer mechanisms, chemical reaction conditions are examined to optimize the design.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Add to Collection

Review Thermodynamics

A review on the properties, preparation, models and stability of hybrid nanofluids to optimize energy consumption

Hamed Eshgarf et al.

Summary: Nanofluids and hybrid nanofluids are new heat transfer media with superior heat transfer characteristics that have gained significant attention. Hybrid nanofluids exhibit more suitable heat transfer performance and thermophysical properties compared to traditional heat transfer fluids and single nanofluids. Current research focuses on investigating the properties, preparation, and stability of hybrid nanofluids.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Add to Collection

Article Thermodynamics

Optimizing nozzle convergent angle using central composite design on the particle velocity and acoustic power level for single-hose dry ice blasting nozzle

Mohamad Nur Hidayat Mat et al.

Summary: This study models the mass momentum and energy exchange of dry ice blasting nozzles using central composite optimization, showing that the optimal convergent angle for minimizing noise emission and maximizing velocity is 7.03 degrees.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Add to Collection

Article Polymer Science

The effect of silica nanoparticles on polysulfone-polyethylene glycol (PSF/PEG) composite membrane on gas separation and rheological properties of nanocomposites

Iman Salahshoori et al.

Summary: This study investigated the polysulfone-polyethylene glycol/silica nanocomposite membranes for gas separation, finding that the membrane with 20% silica had the best separation properties, with a CO2 permeability of 13.36 Barrer and an ideal selectivity of 45.76 for CO2/N2 gases. Various analyses were used to examine the membrane structure and morphology, and mechanical rheometry was employed to study the rheological properties of the hybrid nanosized composites.

POLYMER BULLETIN (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Recent advances in polymer blend membranes for gas separation and pervaporation

Wai Fen Yong et al.

Summary: Recent interest in developing high performance polymeric membranes has improved molecular transport performance in gas separation and pervaporation. Polymer blends have gained interdisciplinary interest as a promising modification strategy due to their versatility, simplicity, cost-effectiveness, and time-effective routes in developing membranes with desirable separation performance. Compatibility at the molecular level remains a main challenge for polymer blends, affecting membrane separation performance.

PROGRESS IN MATERIALS SCIENCE (2021)

Add to Collection

Article Engineering, Chemical

Fabrication of mixed matrix membranes with zinc ion loaded titanium dioxide for improved CO2 separation

Beibei Zhang et al.

Summary: In this study, mixed matrix membranes for facilitated transport of CO2 were prepared using a nano-filler. The effects of nano-filler content, functional group, and operation temperature on gas permselectivity were investigated, and results showed that the incorporation of spherical nano-filler can effectively enhance CO2 permeability.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Recovery of Manganese Ions from Aqueous Solutions with Cyanex 272 Using Emulsion Liquid Membrane Technique: A Design of Experiment Study

Iman Salahshoori et al.

Summary: The research aims to examine the feasibility of manganese ion removal from water via the ELM method by investigating physicochemical factors affecting the stability of the liquid membrane and using the FFD method to select influential factors on manganese ion extraction.

JOURNAL OF SUSTAINABLE METALLURGY (2021)

Add to Collection

Article Physics, Condensed Matter

Structural, magnetic, and electronic properties and stability of 3d-TM substituted single-walled zigzag BNNTs: A density functional theory study

A. Jalalinejad et al.

Summary: The study suggests that for boron nitride nanotubes, substitution at the boron site is more stable than at the nitrogen site. Transition metal substitution reduces the bandgap and induces new impurity states, with the potential for half-metal behavior and spin-crossover phenomena in certain cases.

COMPUTATIONAL CONDENSED MATTER (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Pt/Fe/Ni decorated CVD grown CNTs on carbon paper as electrocatalytic electrodes in polymer fuel cells: An investigation on H2 gas on the growth of CNTs and reduction of electrocatalysts

Hajar Rajaei Litkohi et al.

Summary: The study investigated the in-situ synthesis of CNTs on carbon paper as electrocatalyst support at PEM fuel cell, with a focus on the role of hydrogen gas. Experiments showed that the presence or absence of hydrogen gas during synthesis significantly affects the structure and defect density of CNTs. Optimal flow ratios were determined for successful synthesis of CNTs on CP, leading to high specific surface area and superhydrophobicity. When used as support for PEM fuel cell cathode, CNT/CP showed improved performance, especially when hydrogen gas was present during metal catalyst reduction.

DIAMOND AND RELATED MATERIALS (2021)

Add to Collection

Article Polymer Science

Molecular dynamic simulation approach to understand the physical and proton transport properties of chitosan/sulfonated Poly(Vinyl alcohol) composite membranes

Chun Yik Wong et al.

Summary: This study utilized molecular dynamics simulations to investigate the physical and proton conduction properties of chitosan/sulfonated poly (vinyl) alcohol (CS/SPVA) composite membranes. The results demonstrated superior thermal stability, proton conductivity, and mechanical properties of the composite membrane compared to the single SPVA membrane.

POLYMER (2021)

Add to Collection

Article Engineering, Environmental

COVID-19 spread in a classroom equipped with partition-A CFD approach

Mahshid Mirzaie et al.

Summary: This study investigated the motion and distribution of droplets containing coronaviruses emitted by coughing of an infected person in front of a classroom using CFD. Results showed that seat partitions can prevent infection to a certain extent. Increasing ventilation airflow speeds can accelerate droplets in the airflow direction, reducing trapping time by solid barriers.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Cisplatin uptake and release assessment from hydrogel synthesized in acidic and neutral medium: An experimental and molecular dynamics simulation study

Iman Salahshoori et al.

Summary: This study aimed to design a biodegradable hydrogel with maximum swelling rate, optimum drug loading, and efficient release rate. Experimental findings were compared to molecular dynamics simulation results, and the D-optimal method was used to optimize the guar gum-based hydrogel's physicochemical properties.

JOURNAL OF MOLECULAR LIQUIDS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Light-responsive metal-organic framework sheets constructed smart membranes with tunable transport channels for efficient gas separation

Qingping Xin et al.

Summary: This study introduces a new type of light-responsive metal-organic framework [Co(azpy)] sheets for smart mixed matrix membranes (MMMs), which exhibit significantly improved selectivity for SO2(CO2)/N-2 gases. The permeability and selectivity of the Co(azpy) sheets-loaded smart MMMs can respond to external light stimuli and achieve high levels of performance. Additionally, in a humidified state, the CO2 permeability and CO2/N-2 selectivity of MMMs surpass the upper bound reported by Robeson in 2019.

RSC ADVANCES (2021)

Add to Collection

Article Energy & Fuels

A Sustainable model for the integration of solar and geothermal energy boosted with thermoelectric generators (TEGs) for electricity, cooling and desalination purpose

Ehsanolah Assareh et al.

Summary: An integrated energy system for cooling, hot water, electricity, and desalinated water production is proposed, with the use of thermoelectric generators instead of condensers to improve energy efficiency and reduce costs. System performance is evaluated in various seasons, with the system using thermoelectric generators selected for optimization to achieve a cost rate of 10.41 ($ / GJ) and an exergy efficiency of 20.52%.

GEOTHERMICS (2021)

Add to Collection

Article Thermodynamics

Entropy generation of graphene-platinum hybrid nanofluid flow through a wavy cylindrical microchannel solar receiver by using neural networks

Raouf Khosravi et al.

Summary: This study analyzes the performance of graphene-platinum/water hybrid nanofluid flow in a cylindrical microchannel heat sink using the second law of thermodynamics. Increasing factors such as wave amplitude, nanoparticle concentration, and Reynolds number leads to a decrease in thermal entropy generation rate while frictional entropy increases. The Bejan number was found to be greater than 0.98 in all cases, indicating that irreversibility mainly results from thermal entropy generation. Evidently, increasing input variables reduces the thermal entropy generation rate. Additionally, an artificial neural network model was developed to predict entropy generation based on factors like wave amplitude, nanofluid concentration, and Reynolds number.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Add to Collection

Review Polymer Science

Numerical Methods in Studies of Liquid Crystal Elastomers

Madjid Soltani et al.

Summary: Liquid crystal elastomers (LCEs) are materials with specific properties that can change physical characteristics when exposed to external stimuli, making them suitable for various applications. Numerical models are necessary for better understanding and predicting their behavior in different scenarios.

POLYMERS (2021)

Add to Collection

Article Energy & Fuels

A novel Gamma-type duplex Stirling system to convert heat energy to cooling power: Theoretical and experimental study

Mohammad Hadi Katooli et al.

Summary: This article discusses coupling two Stirling machines together to generate cooling power from different heat sources, presenting experimental and theoretical results for a duplex Stirling refrigerator system. The maximum COP and electrical efficiency of the system using two 500 W Gamma-type Stirling machines are found to range between 0.21% and 70.8% under different conditions.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2021)

Add to Collection

Article Chemistry, Physical

Evaluation of the effect of silica nanoparticles, temperature and pressure on the performance of PSF/PEG/SiO2 mixed matrix membranes: A molecular dynamics simulation (MD) and design of experiments (DOE) study

Iman Salahshoori et al.

Summary: The performance of mixed matrix membranes is influenced by the type and fraction of nanoparticles, operating temperature and pressure. Experimental results indicate that silica particle loading, temperature and pressure are the most significant factors affecting membrane performance.

JOURNAL OF MOLECULAR LIQUIDS (2021)

Add to Collection

Article Polymer Science

Improvement efficiency of the of poly (ether-block-amide) -Cellulose acetate (Pebax-CA) blend by the addition of nanoparticles (MIL-53 and NH2-MIL-53): A molecular dynamics study

Iman Salahshoori et al.

Summary: Recent research on membranes has focused on constructing physicochemically stable membranes with high transfer properties beyond the Robson curve. The addition of MIL-53 and NH2-MIL-53 particles to mixed matrix membranes improved their morphological and transfer properties, showing high compatibility and enhancing CO2 gas transfer due to the presence of amino groups and hydrogen bonding.

JOURNAL OF POLYMER RESEARCH (2021)

Add to Collection

Article Engineering, Chemical

Characterization of TiC ceramics with SiC and/or WC additives using electron microscopy and electron probe micro-analysis

Seyed Ali Delbari et al.

Summary: This study aimed to evaluate the discrete and synergic impacts of SiCw and WCn on the microstructure of TiC-based materials. Using spark plasma sintering, TiC composites with SiCw, WCn, and a combination of both were produced. Various analytical techniques revealed potential chemical interactions and microstructural changes in the composites.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2021)

Add to Collection

Review Green & Sustainable Science & Technology

A review on the recent advances in mixed matrix membranes for gas separation processes

Ashwin R. Kamble et al.

Summary: Efforts are being made to enhance the gas separation properties of existing polymers to broaden their applications in industrial gas separation. Mixed matrix membranes, which are organic-inorganic hybrid membranes, are seen as an alternative approach to improve the gas separation performance of polymeric membranes.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

Add to Collection

Article Thermodynamics

Fluid-structure interaction of free convection in a square cavity divided by a flexible membrane and subjected to sinusoidal temperature heating

Mohammad Ghalambaz et al.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2020)

Add to Collection

Article Thermodynamics

Lattice Boltzmann method to simulate convection heat transfer in a microchannel under heat flux Gravity and inclination angle on slip-velocity

Masoud Mozaffari et al.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2020)

Add to Collection

Article Chemistry, Physical

Determination of Hildebrand solubility parameter of pure 1-alkanols up to high pressures

Ali Sohani et al.

JOURNAL OF MOLECULAR LIQUIDS (2020)

Add to Collection

Article Polymer Science

Investigation of the gas permeability properties from polysulfone/polyethylene glycol composite membrane

Danial Nasirian et al.

POLYMER BULLETIN (2020)

Add to Collection

Article Engineering, Environmental

A favored CO2 separation over light gases using mixed matrix membrane comprising polysulfone/polyethylene glycol and graphene hydroxyl nanoparticles

Morassa Raouf et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2020)

Add to Collection

Article Energy & Fuels

Matrimid® 5218 based mixed matrix membranes containing metal organic frameworks (MOFs) for helium separation

Ali Akbari et al.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2020)

Add to Collection

Article Engineering, Chemical

The effect of ZIF-90 particle in Pebax/Psf composite membrane on the transport properties of CO2, CH4 and N2 gases by Molecular Dynamics Simulation method

Ali Hatami et al.

CHINESE JOURNAL OF CHEMICAL ENGINEERING (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of hydrogen sulfide on the mechanical and thermal properties of cellulose insulation paper: A molecular dynamics simulation

Dongyuan Du et al.

MATERIALS CHEMISTRY AND PHYSICS (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Application based multi-objective performance optimization of a proton exchange membrane fuel cell

Ali Sohani et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Molecular dynamics simulation on the deformation mechanism of monocrystalline and nano-twinned TiN under nanoindentation

Pei Liu et al.

MATERIALS CHEMISTRY AND PHYSICS (2020)

Add to Collection

Article Chemistry, Applied

Multiscale simulation of gas transport in mixed-matrix membranes with interfacial polymer rigidification

Gloria M. Monsalve-Bravo et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2020)

Add to Collection

Article Thermodynamics

Numerical investigation of rarefied gaseous flows in an oblique wavy sided walls square cavity

Wael Al-Kouz et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Energy & Fuels

Estimation of Pressure Drop of Two-Phase Flow in Horizontal Long Pipes Using Artificial Neural Networks

Mostafa Safdari Shadloo et al.

JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME (2020)

Add to Collection

Article Engineering, Chemical

Nanoparticles migration due to thermophoresis and Brownian motion and its impact on Ag-MgO/Water hybrid nanofluid natural convection

Sahar Goudarzi et al.

POWDER TECHNOLOGY (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Prediction of viscosity of biodiesel blends using various artificial model and comparison with empirical correlations

Yuanzhou Zheng et al.

RENEWABLE ENERGY (2020)

Add to Collection

Article Biochemistry & Molecular Biology

Molecular Dynamic Simulations to Probe Stereoselectivity of Tiagabine Binding with Human GAT1

Sadia Zafar et al.

MOLECULES (2020)

Add to Collection

Article Mechanics

Competition of natural convection and thermal creep in a square enclosure

Jun Zhang et al.

PHYSICS OF FLUIDS (2020)

Add to Collection

Article Mechanics

Large eddy simulations of airflow and particle deposition in pulsating bi-directional nasal drug delivery

Ali Farnoud et al.

PHYSICS OF FLUIDS (2020)

Add to Collection

Review Thermodynamics

Exergy analysis in combined heat and power systems: A review

Omid Mahian et al.

ENERGY CONVERSION AND MANAGEMENT (2020)

Add to Collection

Article Engineering, Chemical

Experimental results and optimization via the design of experiment (DOE) of the copper ion recovery from aqueous solutions using emulsion liquid membrane (ELM) method

Mohammad Darami Asl et al.

DESALINATION AND WATER TREATMENT (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Grain boundaries dependence of plastic deformation in nanocrystalline Cu film investigated by phase field and molecular dynamics methods

Meng Zhang et al.

MATERIALS CHEMISTRY AND PHYSICS (2020)

Add to Collection

Article Environmental Sciences

Quantification of Swell Energy and Its Impact on Wetlands in a Deltaic Estuary

Thomas Everett et al.

ESTUARIES AND COASTS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Prediction of properties of silica nanoparticle/hydroxyapatite fiber reinforced Bis-GMA/TEGDMA composites using molecular dynamics

Sumit Sharma et al.

COMPUTATIONAL MATERIALS SCIENCE (2019)

Add to Collection

Article Chemistry, Physical

Effects of different functional groups in graphene nanofiber on the mechanical property of polyvinyl alcohol composites by the molecular dynamic simulations

Yuhua Wang et al.

JOURNAL OF MOLECULAR LIQUIDS (2019)

Add to Collection

Article Chemistry, Physical

Molecular dynamics simulation of fluid flow passing through a nanochannel: Effects of geometric shape of roughnesses

Pedram Alipour et al.

JOURNAL OF MOLECULAR LIQUIDS (2019)

Add to Collection

Article Energy & Fuels

Assessment of gas separation properties and CO2 plasticization of polysulfone/polyethylene glycol membranes

Solmaz Karimi et al.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2019)

Add to Collection

Article Engineering, Chemical

Enhanced CO2 permeability in Matrimid® 5218 mixed matrix membranes for separating binary CO2/CH4 mixtures

Roberto Castro-Munoz et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2019)

Add to Collection

Article Polymer Science

Hierarchical multiscale analysis of polyimide films by molecular dynamics simulation: Investigation of thermo-mechanical properties

Huanyu Lei et al.

POLYMER (2019)

Add to Collection

Review Polymer Science

A Review on Porous Polymeric Membrane Preparation. Part II: Production Techniques with Polyethylene, Polydimethylsiloxane, Polypropylene, Polyimide, and Polytetrafluoroethylene

XueMei Tan et al.

POLYMERS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Molecular dynamics simulation of proton conductivity enhancement in polymer membranes by Y-doped BaCeO3 nanoparticles

Mahmoud Rahmati et al.

COMPUTATIONAL MATERIALS SCIENCE (2019)

Add to Collection

Article Thermodynamics

Experimental investigation and performance optimisation of a catalytic reforming micro-reactor using response surface methodology

M. M. Sarafraz et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Promising Performance for Efficient CO2 Separation with the p-tert-Butylcalix[4]arene/Pebax-1657 Mixed Matrix Membrane

Atefeh Nadeali et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Add to Collection

Article Engineering, Chemical

Effect of the ZIF-8 Distribution in Mixed-Matrix Membranes Based on Matrimid® 5218-PEG on CO2 Separation

Roberto Castro-Munoz et al.

CHEMICAL ENGINEERING & TECHNOLOGY (2019)

Add to Collection

Editorial Material Thermodynamics

Nanofluid Today Preface

Omid Mahian et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)

Add to Collection

Article Polymer Science

Highly Permeable Matrimid®/PIM-EA(H2)-TB Blend Membrane for Gas Separation

Elisa Esposito et al.

POLYMERS (2019)

Add to Collection

Review Chemistry, Physical

Mixed-matrix membranes for CO2 separation: role of the third component

Xiangyu Guo et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Review Pharmacology & Pharmacy

Molecular dynamics simulations and novel drug discovery

Xuewei Liu et al.

EXPERT OPINION ON DRUG DISCOVERY (2018)

Add to Collection

Article Thermodynamics

Experimental investigation of the effects of temperature and mass fraction on the dynamic viscosity of CuO-paraffin nanofluid

Samad Ghasemi et al.

APPLIED THERMAL ENGINEERING (2018)

Add to Collection

Article Engineering, Chemical

Preparation and characterization of mixed matrix membranes based on Matrimid/PVDF blend and MIL-101(Cr) as filler for CO2/CH4 separation

Hajar Rajati et al.

CHEMICAL ENGINEERING SCIENCE (2018)

Add to Collection

Article Chemistry, Physical

Shape selective silver nanostructures decorated amine-functionalized graphene: A promising antibacterial platform

Maryam Derakhshi et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Molecular dynamics simulation on the physical properties of the novel designed poly-(phthalazinone ether sulfone ketone) (PPESK)

Yao Shu et al.

COMPUTATIONAL MATERIALS SCIENCE (2018)

Add to Collection

Article Materials Science, Multidisciplinary

A comparison of pure and mixed-gas permeation of nitrogen and methane in 6FDA-based polyimides as studied by molecular dynamics simulations

Ioannis Tanis et al.

COMPUTATIONAL MATERIALS SCIENCE (2018)

Add to Collection

Article Thermodynamics

Effects on thermophysical properties of carbon based nanofluids: Experimental data, modelling using regression, ANFIS and ANN

Abdullah A. A. A. Alrashed et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Add to Collection

Article Chemistry, Physical

Grand canonical. Monte Carlo and molecular dynamics simulations of the structural properties, diffusion and adsorption of hydrogen molecules through poly(benzimidazoles)/nanoparticle oxides composites

Abdollah Khosravanian et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)

Add to Collection

Review Green & Sustainable Science & Technology

The use of nanofluids in solar concentrating technologies: A comprehensive review

Evangelos Bellos et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Add to Collection

Article Construction & Building Technology

Diffusion and Rheological Properties of Asphalt Modified by Bio-Oil Regenerant Derived from Waste Wood

Bin Sun et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2018)

Add to Collection

Article Chemistry, Physical

Molecular dynamics, grand canonical Monte Carlo and expert simulations and modeling of water-acetic acid pervaporation using polyvinyl alcohol/tetraethyl orthosilicates membrane

Amir Dashti et al.

JOURNAL OF MOLECULAR LIQUIDS (2018)

Add to Collection

Article Physics, Multidisciplinary

The investigation of thermal radiation and free convection heat transfer mechanisms of nanofluid inside a shallow cavity by lattice Boltzmann method

Mohammad Reza Safaei et al.

PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS (2018)

Add to Collection

Article Physics, Multidisciplinary

Numerical investigation of the pseudopotential lattice Boltzmann modeling of liquid-vapor for multi-phase flows

Maedeh Nemati et al.

PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS (2018)

Add to Collection

Article Physics, Multidisciplinary

Develop the nano scale method of lattice Boltzmann to predict the fluid flow and heat transfer of air in the inclined lid driven cavity with a large heat source inside, Two case studies: Pure natural convection & mixed convection

Marjan Goodarzi et al.

PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS (2018)

Add to Collection

Article Physics, Multidisciplinary

Develop the lattice Boltzmann method to simulate the slip velocity and temperature domain of buoyancy forces of FMWCNT nanoparticles in water through a micro flow imposed to the specified heat flux

Arash Karimipour et al.

PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS (2018)

Add to Collection

Article Engineering, Chemical

Mixed matrix membranes based on amine and non-amine MIL-53(Al) in Pebax (R) MH-1657 for CO2 separation

Shadi Meshkat et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2018)

Add to Collection

Review Engineering, Chemical

Recent advances in polymeric membranes for CO2 capture

Yang Han et al.

CHINESE JOURNAL OF CHEMICAL ENGINEERING (2018)

Add to Collection

Review Neurosciences

Molecular Dynamics Simulation for All

Scott A. Hollingsworth et al.

NEURON (2018)

Add to Collection

Review Biochemistry & Molecular Biology

Progress on Incorporating Zeolites in Matrimid®5218 Mixed Matrix Membranes towards Gas Separation

Roberto Castro-Munoz et al.

MEMBRANES (2018)

Add to Collection

Review Engineering, Chemical

Matrimid((R)) 5218 in preparation of membranes for gas separation: Current state-of-the-art

Roberto Castro-Munoz et al.

CHEMICAL ENGINEERING COMMUNICATIONS (2018)

Add to Collection

Article Thermodynamics

Entropy Generation in a Circular Tube Heat Exchanger Using Nanofluids: Effects of Different Modeling Approaches

Mohammad Mehdi Rashidi et al.

HEAT TRANSFER ENGINEERING (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Analysis of fluid-solid interaction in MHD natural convection in a square cavity equally partitioned by a vertical flexible membrane

S. A. M. Mehryan et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2017)

Add to Collection

Article Engineering, Chemical

Separation of gases by using pristine, composite and nanocomposite polymeric membranes: A molecular dynamics simulation study

Karim Golzar et al.

JOURNAL OF MEMBRANE SCIENCE (2017)

Add to Collection

Article Chemistry, Physical

Molecular dynamics and Monte Carlo simulation of the structural properties, diffusion and adsorption of poly (amide-6-b-ethylene oxide)/Faujasite mixed matrix membranes

Mostafa Dehghani et al.

JOURNAL OF MOLECULAR LIQUIDS (2017)

Add to Collection

Article Chemistry, Physical

Molecular simulation and experimental investigation of temperature effect on chitosan-nanosilica supported mixed matrix membranes for dehydration of ethanol via pervaporation

Morteza Asghari et al.

JOURNAL OF MOLECULAR LIQUIDS (2017)

Add to Collection

Article Chemistry, Physical

Molecular dynamics simulation and Monte Carlo study of transport and structural properties of PEBA 1657 and 2533 membranes modified by functionalized POSS-PEG material

Mandieh Pazirofteh et al.

JOURNAL OF MOLECULAR LIQUIDS (2017)

Add to Collection

Article Biochemistry & Molecular Biology

Effect of pristine and functionalized single- and multi-walled carbon nanotubes on CO2 separation ofmixedmatrixmembranes based on polymers of intrinsic microporosity (PIM-1): a molecular dynamics simulation study

Karim Golzar et al.

JOURNAL OF MOLECULAR MODELING (2017)

Add to Collection

Article Engineering, Biomedical

Molecular mechanisms in compatibility and mechanical properties of Polyacrylamide/Polyvinyl alcohol blends

Qinghua Wei et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)

Add to Collection

Review Engineering, Chemical

Recent advances on mixed matrix membranes for CO2 separation

Ming Wang et al.

CHINESE JOURNAL OF CHEMICAL ENGINEERING (2017)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Wind wave analysis in depth limited water using OCEANLYZ, A MATLAB toolbox

Arash Karimpour et al.

COMPUTERS & GEOSCIENCES (2017)

Add to Collection

Article Polymer Science

The thermo-mechanical properties estimation of fullerene-reinforced resin epoxy composites by molecular dynamics simulation - A comparative study

F. Jeyranpour et al.

POLYMER (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of composition ratio on the properties of poly(vinyl alcohol)/poly (acrylic acid) blend membrane: A molecular dynamics simulation study

Qinghua Wei et al.

MATERIALS & DESIGN (2016)

Add to Collection

Article Thermodynamics

Investigation of heat transfer and pressure drop of a counter flow corrugated plate heat exchanger using MWCNT based nanofluids

Marjan Goodarzi et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2015)

Add to Collection

Article Green & Sustainable Science & Technology

Preparation and characterization of Matrimid® 5218 based binary and ternary mixed matrix membranes for CO2 separation

Mahsa Loloei et al.

INTERNATIONAL JOURNAL OF GREENHOUSE GAS CONTROL (2015)

Add to Collection

Article Energy & Fuels

Improved CO2 separation performance of Matrimid®5218 membrane by addition of low molecular weight polyethylene glycol

Mahsa Loloei et al.

GREENHOUSE GASES-SCIENCE AND TECHNOLOGY (2015)

Add to Collection

Article Mathematics, Applied

Comparison of the Finite Volume and Lattice Boltzmann Methods for Solving Natural Convection Heat Transfer Problems inside Cavities and Enclosures

M. Goodarzi et al.

ABSTRACT AND APPLIED ANALYSIS (2014)

Add to Collection

Article Engineering, Chemical

Development of Solubility Selective Mixed Matrix Membranes for Gas Separation

Heike Mushardt et al.

CHEMIE INGENIEUR TECHNIK (2014)

Add to Collection

Article Polymer Science

Preparation, Characterization, and Applicability of Novel Calix[4] arene- Based Cellulose Acetate Membranes in Gas Permeation

Sarah Farrukh et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Synthesis and characterization of diethanolamine-impregnated cross-linked polyvinylalcohol/glutaraldehyde membranes for CO2/CH4 separation

Mona Zamani Pedram et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2014)

Add to Collection

Article Engineering, Chemical

Molecular modeling of poly(benzoxazole-co-imide) membranes: A structure characterization and performance investigation

Kai-Shiun Chang et al.

JOURNAL OF MEMBRANE SCIENCE (2014)

Add to Collection

Article Engineering, Chemical

Molecular simulation study of penetrant gas transport properties into the pure and nanosized silica particles filled polysulfone membranes

Karim Golzar et al.

JOURNAL OF MEMBRANE SCIENCE (2014)

Add to Collection

Article Chemistry, Applied

Nanosilica and H-Mordenite incorporated Poly(ether-block-amide)-1657 membranes for gaseous separations

R. Surya Murali et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2014)

Add to Collection

Article Physics, Multidisciplinary

Mixed convection of copper-water nanofluid in a shallow inclined lid driven cavity using the lattice Boltzmann method

Arash Karimipour et al.

PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS (2014)

Add to Collection

Review Engineering, Chemical

Recent Applications of Polymer Blends in Gas Separation Membranes

Hafiz A. Mannan et al.

CHEMICAL ENGINEERING & TECHNOLOGY (2013)

Add to Collection

Review Chemistry, Multidisciplinary

Predictive Models for Mixed-Matrix Membrane Performance: A Review

Hoang Vinh-Thang et al.

CHEMICAL REVIEWS (2013)

Add to Collection

Article Chemistry, Physical

Challenges and opportunities for mixed-matrix membranes for gas separation

Guangxi Dong et al.

JOURNAL OF MATERIALS CHEMISTRY A (2013)

Add to Collection

Article Construction & Building Technology

Modeling the neutrally stable atmospheric boundary layer for laboratory scale studies of the built environment

A. Karimpour et al.

BUILDING AND ENVIRONMENT (2012)

Add to Collection

Article Engineering, Chemical

The role of solubility partition coefficient at the mixed matrix interface in the performance of mixed matrix membranes

Eva Marand et al.

JOURNAL OF MEMBRANE SCIENCE (2012)

Add to Collection

Article Engineering, Chemical

Gas transport properties of Pebax®/room temperature ionic liquid gel membranes

Paola Bernardo et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2012)

Add to Collection

Article Engineering, Civil

CFD Study of Merging Turbulent Plane Jets

A. Karimpour et al.

JOURNAL OF HYDRAULIC ENGINEERING-ASCE (2011)

Add to Collection

Article Engineering, Chemical

Perspectives on mixed matrix membranes

Richard D. Noble

JOURNAL OF MEMBRANE SCIENCE (2011)

Add to Collection

Article Engineering, Chemical

The effect of TiO2 nanoparticles on gas transport properties of Matrimid5218-based mixed matrix membranes

F. Moghadam et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2011)

Add to Collection

Review Engineering, Chemical

Performance studies of mixed matrix membranes for gas separation: A review

M. A. Aroon et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2010)

Add to Collection

Review Polymer Science

Computer modeling of polymer crystallization - Toward computer-assisted materials' design

Takashi Yamamoto

POLYMER (2009)

Add to Collection

Article Chemistry, Physical

Permeation models for mixed matrix membranes

Rajinder Pal

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2008)

Add to Collection

Article Engineering, Chemical

PEG modified poly(amide-b-ethylene oxide) membranes for CO2 separation

Anja. Car et al.

JOURNAL OF MEMBRANE SCIENCE (2008)

Add to Collection

Article Polymer Science

Effect of fractional free volume and Tg on gas separation through membranes made with different glassy polymers

Roberto Recio et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2008)

Add to Collection

Article Polymer Science

Synthesis, characterization, and molecular modeling studies of novel polyurethanes based on 2,2′-[ethane-1,2-diylbis(nitrilomethylylidene)]diphenol and 2,2′-[hexane-1,6-diylbis(nitrilomethylylidene)]diphenol hard segments

A. V. Raghu et al.

JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2006)

Add to Collection

Article Engineering, Chemical

Estimating models for predicting effective permeability of mixed matrix membranes

EE Gonzo et al.

JOURNAL OF MEMBRANE SCIENCE (2006)

Add to Collection

Article Engineering, Multidisciplinary

Unsteady MHD convective heat and mass transfer past a semi-infinite vertical permeable moving plate with heat absorption

AJ Chamkha

INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE (2004)

Add to Collection

Article Engineering, Chemical

Molecular modelling of polyimide membranes for gas separation

M Heuchel et al.

DESALINATION (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.