4.7 Review

Progress on co-processing of biomass and plastic waste for hydrogen production

Related references

Note: Only part of the references are listed.
Article Energy & Fuels

Environmental and economic issues for renewable production of bio-jet fuel: A global prospective

Rahul Tiwari et al.

Summary: Given the rapid growth of the aviation sector, finding sustainable ways to meet the demand is crucial. Biojet fuels, considered more renewable and less polluting than traditional jet fuel, have the potential to be an effective substitute, but the high price of feedstock and limited supply are the main obstacles to widespread adoption.
Review Chemistry, Multidisciplinary

Co-pyrolysis of biomass and waste plastics for production of chemicals and liquid fuel: A review on the role of plastics and catalyst types

Aizatul Hikmah Zulkafli et al.

Summary: This article reviews the influence of plastic waste as co-reactant in co-pyrolysis with biomass on the product distribution, synergistic effect, and quality of bio-oil. It also discusses the critical role of zeolite-based and low-cost mineral-based catalysts in upgrading the yield and quality of liquid fuel. The potential challenges and future directions for this technique are also suggested.

ARABIAN JOURNAL OF CHEMISTRY (2023)

Article Chemistry, Multidisciplinary

Recent Research Advancements in Catalytic Pyrolysis of Plastic Waste

Rahul Mishra et al.

Summary: The disposal of plastic waste is a global issue that affects the environment and mankind. Thermochemical recycling techniques, particularly pyrolysis, have been extensively researched to convert waste plastics into value-added products. Catalytic pyrolysis is used to produce higher quantities of fuel, and various catalysts are employed for this purpose. This Perspective provides an overview of recent developments in catalytic pyrolysis, focusing on the impact on product yields and composition, as well as the potential applications. It also includes a thorough review of techno-economic assessment.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2023)

Article Energy & Fuels

Preparation of Ni-La/Al2O3-CeO2-Bamboo Charcoal Catalyst and Its Application in Co-pyrolysis of Straw and Plastic for Hydrogen Production

Yiran Zhang et al.

Summary: The use of Ni-La/ACB catalyst significantly promotes hydrogen production, with the optimal mixing ratio of straw and polyethylene being 5:5. Co-pyrolysis can solve the pollution problem caused by plastic while maximizing the utilization of renewable energy.

BIOENERGY RESEARCH (2022)

Article Thermodynamics

Downdraft co-gasification of high ash biomass and plastics

A. Fazil et al.

Summary: This study investigates the co-gasification of plastic waste and biomass in a downdraft gasifier. The results show that increasing the plastic content in the feedstock improves temperature, gas heating value, and cold gas efficiency while reducing clinker formation and slightly decreasing tar yield.

ENERGY (2022)

Article Chemistry, Applied

Development of metal-doping mesoporous biochar catalyst for co-valorizing biomass and plastic waste into valuable hydrocarbons, syngas, and carbons

Ruolan Xu et al.

Summary: The study successfully produced metal-doping mesoporous graphite-like catalysts by utilizing metal chlorides to modulate biochar, which showed enhanced selectivity towards hydrocarbons in catalytic bio-oil synthesis, as well as increased hydrogen and syngas yields in the gas phase.

FUEL PROCESSING TECHNOLOGY (2022)

Article Chemistry, Analytical

An insight on sampling, identification, quantification and characteristics of microplastics in solid wastes

Palas Samanta et al.

Summary: This study explores the occurrence, sources, identification, quantification, and fate of microplastics in solid waste, with a focus on the strengths and limitations of different analytical techniques. It also discusses the relevance of national and international regulations and laws, as well as future challenges in managing solid waste microplastics. The findings of this review paper are valuable for effective policy implementation.

TRENDS IN ENVIRONMENTAL ANALYTICAL CHEMISTRY (2022)

Review Agricultural Engineering

Biomass pyrolysis: A review on recent advancements and green hydrogen production

Arun Krishna Vuppaladadiyam et al.

Summary: This review provides an overview of recent advancements in biomass pyrolysis, classifying them into conventional, advanced, and emerging approaches, and summarizing the current status for industrial applications. The impact of different pyrolysis techniques on biomass conversion for hydrogen production is evaluated, and future directions for overcoming current shortcomings are discussed.

BIORESOURCE TECHNOLOGY (2022)

Article Green & Sustainable Science & Technology

Catalytic co-pyrolysis of solid wastes (low-density polyethylene and lignocellulosic biomass) over microwave assisted biochar for bio-oil upgrading and hydrogen production

Rongge Zou et al.

Summary: In this study, microwave-assisted corn stover biochar was used as a catalyst, and it was found that the biochar significantly increased the selectivity of hydrogen in the syngas, reduced the wax yield, and showed good reusability.

JOURNAL OF CLEANER PRODUCTION (2022)

Review Green & Sustainable Science & Technology

Co-gasification of solid waste and its impact on final product yields

Rahul Mishra et al.

Summary: Solid wastes are considered a viable renewable energy source that can be converted into valuable materials and energy through co-gasification. Co-gasification allows for customization of the product gas composition by adjusting the feedstock and mixing ratios. This review discusses the effects of co-gasifying solid waste and their mixtures on energy and material recovery, emphasizing its importance in energy efficiency and technical feasibility.

JOURNAL OF CLEANER PRODUCTION (2022)

Article Chemistry, Multidisciplinary

Hydrogen-Rich and Clean Fuel Gas Production from Co-pyrolysis of Biomass and Plastic Blends with CaO Additive

Yuanjun Tang et al.

Summary: This study investigates the pyrolysis of biomass and plastic blends and finds that increasing the temperature and adding CaO can significantly improve the quality and quantity of the fuel gas, reduce the formation of tar and HCl. Additionally, the use of CaO can enhance the H2 yield and H2/CO ratio, and effectively remove tar and HCl.

ACS OMEGA (2022)

Article Thermodynamics

Enhancement of the production of aromatics and bio-syngas from microwave ex-situ pyrolysis based on Zn/Zr modified biochar and multi-catalysts

Xiaopeng Shi et al.

Summary: The main purpose of this study was to investigate the effects of metal modified biochar and multi-catalysts on the quality of biomass products obtained through microwave pyrolysis. The results showed that different catalysts had varying effects on the yield and selectivity of the products. The study successfully demonstrated a method for producing high-value bio-oil and bio-syngas.

ENERGY (2022)

Article Energy & Fuels

Quantifying the sources of synergistic effects in co-pyrolysis of pinewood and polystyrene

Kiran Raj G. Burra et al.

Summary: The study investigates the interactions between biomass and plastic blends during co-pyrolysis, revealing the different effects of volatile-volatile, volatile-feedstock, and volatile-char interactions. Quantified results show significant increases in H-2 yield due to these interactions, providing insight into enhancing synergy and developing sustainable gasifier development.

APPLIED ENERGY (2021)

Review Agricultural Engineering

Techno-economic assessment of various hydrogen production methods - A review

R. Yukesh Kannah et al.

Summary: In order to advance the use of hydrogen as a clean fuel in the future, it is necessary to conduct techno-economic and sensitivity analyses of existing hydrogen production platforms and processes, and to develop new methods to reduce overall production costs. Steam reforming of natural gas is currently the most efficient and cost-effective method for hydrogen production.

BIORESOURCE TECHNOLOGY (2021)

Article Engineering, Environmental

Is incineration the terminator of plastics and microplastics?

Zhan Yang et al.

Summary: The study found that a significant amount of microplastics exist in bottom ash generated from incineration, with each metric ton of waste producing a considerable number of microplastic particles. Polypropylene and polystyrene were identified as the predominant types, and microplastics exhibited various forms with abundance influenced by factors such as waste separation, GDP per capita, and furnace types.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Thermodynamics

Investigation on hydrogen-rich syngas production from catalytic co-pyrolysis of polyvinyl chloride (PVC) and waste paper blends

Chao Wang et al.

Summary: The study explores catalytic co-pyrolysis of waste paper and polyvinyl chloride for hydrogen-rich syngas production, with promising results at 900 degrees C and a 60% PVC weight ratio yielding maximum H-2 production. Fe/CeO2-CaO catalyst showed higher hydrogen yield compared to Ru/ZSM-5-CaO, showcasing the potential for enhanced hydrogen production through carbon species fixation.

ENERGY (2021)

Article Thermodynamics

ReaxFF simulations of the synergistic effect mechanisms during co-pyrolysis of coal and polyethylene/polystyrene

Dikun Hong et al.

Summary: This paper investigates the co-pyrolysis behaviors of Zhundong coal with polyethylene (PE) and polystyrene (PS) using reactive molecular dynamics simulation. The results show that coal promotes primary decomposition of PE at low temperatures but has little effect on PE pyrolysis at high temperatures. Meanwhile, PE and PS significantly promote coal char decomposition at high temperatures, with polystyrene having a more pronounced effect than polyethylene.

ENERGY (2021)

Article Engineering, Environmental

Intensification of co-pyrolysis of plastic with biomass via pretreatment

Ishaka Muhammad et al.

Summary: Biomass pyrolysis performance is enhanced through pre-treatment methods, increasing the liquid fuel product quantity and quality, especially in catalytic pyrolysis. Pre-degradation treatment lowers the decomposition temperature of cellulose, while also boosting liquid yield and char/coke yield.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2021)

Article Energy & Fuels

Towards enhanced understanding of synergistic effects in co-pyrolysis of pinewood and polycarbonate

Xuan Liu et al.

Summary: The study investigated the synergistic effects and mechanism of co-pyrolysis of pinewood and polycarbonate, showing enhanced H2 and CO yields, as well as increased overall syngas production and energy recovery efficiency. Various component interactions were analyzed to gain insights into the synergistic mechanism, with volatiles-volatiles interactions playing a primary role in enhancing gas production. This research contributes to a better understanding of co-pyrolysis for designing efficient energy recovery systems from lignocellulosic biomass and polycarbonate wastes.

APPLIED ENERGY (2021)

Article Chemistry, Analytical

Techno-economic Assessment of Co-gasification of Rice Husk and Plastic Waste as an Off-grid Power Source for Small Scale Rice Milling-an Aspen Plus Model

Jamilu Salisu et al.

Summary: Inadequate access to electricity in Nigeria has led to the use of alternative energy sources such as diesel and wood combustion in rice mills, contributing to high operating costs and environmental issues. This research proposes co-gasification of rice husks and plastic waste in the presence of CaO for integrated heat and power generation, providing economic benefits and reducing environmental pollution. The system demonstrates cost savings and greenhouse gas emission reductions, supporting the UN's sustainable development goals.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2021)

Review Thermodynamics

Co-pyrolysis of waste plastic and solid biomass for synergistic production of biofuels and chemicals-A review

Zhiwei Wang et al.

Summary: The study focuses on co-pyrolysis of waste plastic and solid biomass mixtures, which can provide synergistic enhancement for fuels and value-added products, and foster eco-friendly pathways for waste management and sustainability. The paper discusses the properties of different feedstocks and experimental methods for co-pyrolysis, as well as characteristics of co-pyrolysis reactors and catalytic methods.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2021)

Review Chemistry, Multidisciplinary

Utilization of Plastic Wastes for Sustainable Environmental Management: A Review

Sunil Kumar et al.

Summary: The advancement and modernization of industries have led to the production of a wide range of plastic products, resulting in a significant amount of plastic waste. Recycling plastic not only helps protect the environment and conserve resources, but also yields valuable recycled products through various techniques.

CHEMSUSCHEM (2021)

Review Thermodynamics

Current status of biohydrogen production from lignocellulosic biomass, technical challenges and commercial potential through pyrolysis process

Wei-Hsin Chen et al.

Summary: This review article explores the potential of hydrogen production from biomass pyrolysis, providing a comprehensive analysis of the current technology status and future prospects to guide further research and commercialization efforts.

ENERGY (2021)

Review Energy & Fuels

Progress on Catalyst Development for the Steam Reforming of Biomass and Waste Plastics Pyrolysis Volatiles: A Review

Laura Santamaria et al.

Summary: This review focuses on the production of H-2 from biomass and waste plastics using pyrolysis-reforming, highlighting the bottleneck in the design of reforming catalysts. The study emphasizes the significant impact of catalytic materials and synthesis methods on the performance of the pyrolysis-reforming process.

ENERGY & FUELS (2021)

Article Environmental Sciences

Catalytic upcycling of waste plastics over nanocellulose derived biochar catalyst for the coupling harvest of hydrogen and liquid fuels

Chenxi Wang et al.

Summary: A powerful biochar catalyst derived from nanocellulose was used for the first time to catalytically upcycle waste plastics into H-2 and liquid fuels. The results showed dominant aliphatics and aromatics in the liquid product, with the possibility of complete degradation of LDPE into liquid and gas without wax at specific conditions. Additionally, the catalyst favored increasing H-2 generation at the expense of light gas CnHm, especially CH4.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Article Materials Science, Paper & Wood

Preparation of Hydrogen-rich Gas by Catalytic Pyrolysis of Straw-plastic Mixture with Nickel-based Honeycomb Cinder

Zeshan Li et al.

Summary: The study demonstrated the effectiveness of Nickel catalyst supported on honeycomb cinder in producing hydrogen-rich combustible gas from catalytic pyrolysis of soybean straw and plastic mixture. Optimization of catalytic effect can be achieved by adjusting Ni loading and various operating conditions.

BIORESOURCES (2021)

Article Agricultural Engineering

Synergistic effect of mixing wheat straw and lignite in co-pyrolysis and steam co-gasification

Shuheng Zhao et al.

BIORESOURCE TECHNOLOGY (2020)

Article Energy & Fuels

Experimental study of the co-gasification of wood and polyethylene in a two-stage gasifier

Ibrahim G. Harouna et al.

ENERGY SCIENCE & ENGINEERING (2020)

Article Energy & Fuels

Co-gasification of palm kernel shell and polystyrene plastic: Effect of different operating conditions

Mohd Hafif Basha et al.

JOURNAL OF THE ENERGY INSTITUTE (2020)

Article Energy & Fuels

Co-gasification of coal/biomass blends in 50 kWe circulating fluidized bed gasifier

Debarshi Mallick et al.

JOURNAL OF THE ENERGY INSTITUTE (2020)

Review Environmental Sciences

Co-pyrogasification of Plastics and Biomass, a Review

C. Block et al.

WASTE AND BIOMASS VALORIZATION (2019)

Review Green & Sustainable Science & Technology

Effect of various blended fuels on syngas quality and performance in catalytic co-gasification: A review

Muddasser Inayat et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2019)

Article Chemistry, Multidisciplinary

Hydrogen-Rich Syngas Production through Synergistic Methane-Activated Catalytic Biomass Gasification

Amoolya Lalsare et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Article Environmental Sciences

Cross-interaction during Co-gasification of wood, weed, plastic, tire and carton

Saman Salavati et al.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2019)

Article Agricultural Engineering

Pyrolysis kinetics and thermal behavior of waste sawdust biomass using thermogravimetric analysis

Ranjeet Kumar Mishra et al.

BIORESOURCE TECHNOLOGY (2018)

Review Thermodynamics

Evaluation of thermochemical routes for hydrogen production from biomass: A review

Aitor Arregi et al.

ENERGY CONVERSION AND MANAGEMENT (2018)

Review Environmental Sciences

Current research trends on plastic pollution and ecological impacts on the soil ecosystem: A review

Yooeun Chae et al.

ENVIRONMENTAL POLLUTION (2018)

Review Green & Sustainable Science & Technology

Co-gasification and recent developments on waste-to-energy conversion: A review

Ana Ramos et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

Review Green & Sustainable Science & Technology

Recent advances in the gasification of waste plastics. A critical overview

Gartzen Lopez et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

Article Chemistry, Multidisciplinary

Co-pyrolysis of E-Waste Nonmetallic Residues with Biowastes

Yafei Shen et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

Article Green & Sustainable Science & Technology

Techno-economic analysis of electricity and heat production by co-gasification of coal, biomass and waste tyre in South Africa

M. Ozonoh et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Article Chemistry, Physical

Renewable hydrogen energy and energy efficiency in Turkey in the 21st century

Sudi Apak et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Article Chemistry, Physical

Techno-economic analysis and life cycle assessment of hydrogen production from natural gas using current and emerging technologies

Yaser Khojasteh Salkuyeh et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Article Chemistry, Physical

Effects of biochemical composition on hydrogen production by biomass gasification

Tian Tian et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Review Green & Sustainable Science & Technology

Recent advances in the development of biomass gasification technology: A comprehensive review

S. K. Sansaniwal et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

Proceedings Paper Energy & Fuels

Investigation on the effect of blending ratio and airflow rate on syngas profile produced from co-gasification of blended feedstock

Muddasser Inayat et al.

UTP-UMP SYMPOSIUM ON ENERGY SYSTEMS 2017 (SES 2017) (2017)

Article Agricultural Engineering

Hydrogen production from biomass gasification using biochar as a catalyst/support

Dingding Yao et al.

BIORESOURCE TECHNOLOGY (2016)

Article Thermodynamics

Kinetic behavior of biomass under oxidative atmosphere using a micro-fluidized bed reactor

Feiqiang Guo et al.

ENERGY CONVERSION AND MANAGEMENT (2016)

Review Chemistry, Multidisciplinary

Catalytic co-pyrolysis of lignocellulosic biomass with polymers: a critical review

Xuesong Zhang et al.

GREEN CHEMISTRY (2016)

Review Green & Sustainable Science & Technology

Chemometric interpretation of different biomass gasification processes based on the syngas quality: Assessment of crude glycerol co-gasification with lignocellulosic biomass

Natasa Durisic-Mladenovic et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

Review Green & Sustainable Science & Technology

Catalytic steam reforming of biomass tar: Prospects and challenges

Guoqing Guan et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

Review Green & Sustainable Science & Technology

Techno-economic and life cycle assessment on lignocellulosic biomass thermochemical conversion technologies: A review

Madhumita Patel et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

Article Agricultural Engineering

Metal catalysts for steam reforming of tar derived from the gasification of lignocellulosic biomass

Dalin Li et al.

BIORESOURCE TECHNOLOGY (2015)

Article Thermodynamics

Co-pyrolysis behaviors of energy grass and lignite

Yanjun Guan et al.

ENERGY CONVERSION AND MANAGEMENT (2015)

Review Green & Sustainable Science & Technology

Current state and future prospects of plastic waste as source of fuel: A review

S. L. Wong et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)

Article Energy & Fuels

Slag Formation during Oxygen-Blown Entrained-Flow Gasification of Stem Wood

Per Carlsson et al.

ENERGY & FUELS (2014)

Review Thermodynamics

A review on co-pyrolysis of biomass: An optional technique to obtain a high-grade pyrolysis oil

Faisal Abnisa et al.

ENERGY CONVERSION AND MANAGEMENT (2014)

Article Thermodynamics

Bio-oil production via co-pyrolysis of almond shell as biomass and high density polyethylene

Eylem Onal et al.

ENERGY CONVERSION AND MANAGEMENT (2014)

Article Chemistry, Physical

Hydrogen-rich gas as a product of two-stage co-gasification of lignite/waste plastics mixtures

Pavel Straka et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)

Article Chemistry, Physical

Hydrogen production from biomass and plastic mixtures by pyrolysis-gasification

Jon Alvarez et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)

Article Chemistry, Analytical

Products characterization study of a slow pyrolysis of biomass-plastic mixtures in a fixed-bed reactor

Ozge Cepeliogullara et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2014)

Article Nanoscience & Nanotechnology

Pyrolysis and co-pyrolysis of Laminaria japonica and polypropylene over mesoporous Al-SBA-15 catalyst

Hyung Won Lee et al.

NANOSCALE RESEARCH LETTERS (2014)

Article Energy & Fuels

Low-Temperature Co-pyrolysis of Polypropylene and Coffee Wastes to Fuels

Elena Zanella et al.

ENERGY & FUELS (2013)

Review Green & Sustainable Science & Technology

The crucial role of Waste-to-Energy technologies in enhanced landfill mining: a technology review

A. Bosmans et al.

JOURNAL OF CLEANER PRODUCTION (2013)

Review Agricultural Engineering

Review of fast pyrolysis of biomass and product upgrading

A. V. Bridgwater

BIOMASS & BIOENERGY (2012)

Article Agricultural Engineering

Co-gasification of wet sewage sludge and forestry waste in situ steam agent

Lixin Peng et al.

BIORESOURCE TECHNOLOGY (2012)

Article Engineering, Environmental

Production of hydrogen via steam reforming of bio-oil over Ni-based catalysts: Effect of support

Fakhry Seyedeyn Azad et al.

CHEMICAL ENGINEERING JOURNAL (2012)

Article Chemistry, Applied

Effect of steam content in the air-steam flow on biomass entrained flow gasification

J. J. Hernandez et al.

FUEL PROCESSING TECHNOLOGY (2012)

Article Polymer Science

Co-pyrolysis of LignoBoost® lignin with synthetic polymers

Mihai Brebu et al.

POLYMER DEGRADATION AND STABILITY (2012)

Review Thermodynamics

Pollutants from the combustion of solid biomass fuels

A. Williams et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2012)

Article Energy & Fuels

Characteristics of syngas from co-gasification of polyethylene and woodchips

I. I. Ahmed et al.

APPLIED ENERGY (2011)

Article Energy & Fuels

Co-pyrolysis of pine cone with synthetic polymers

Mihai Brebu et al.

Review Green & Sustainable Science & Technology

Biomass energy and the environmental impacts associated with its production and utilization

Tasneem Abbasi et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2010)

Review Green & Sustainable Science & Technology

Thermolysis of waste plastics to liquid fuel A suitable method for plastic waste management and manufacture of value added products-A world prospective

Achyut K. Panda et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2010)

Article Agricultural Engineering

Experimental studies on producer gas generation from wood waste in a downdraft biomass gasifier

Pratik N. Sheth et al.

BIORESOURCE TECHNOLOGY (2009)

Article Thermodynamics

CO-PYROLYSIS OF OLIVE RESIDUE WITH POLY(VINYL CHLORIDE) USING THERMOGRAVIMETRIC ANALYSIS

A. Aboulkas et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2009)

Article Polymer Science

Detailed mechanistic modeling of high-density polyethylene pyrolysis: Low molecular weight product evolution

Seth E. Levine et al.

POLYMER DEGRADATION AND STABILITY (2009)

Article Chemistry, Applied

An overview of hydrogen production from biomass

M Ni et al.

FUEL PROCESSING TECHNOLOGY (2006)

Review Materials Science, Multidisciplinary

Feedstock recycling of polymer wastes

AA Garforth et al.

CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2004)

Article Chemistry, Analytical

Co-pyrolysis of wood biomass and synthetic polymers mixtures. Part III: Characterisation of heavy products

VI Sharypov et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2003)

Article Chemistry, Analytical

Thermal decomposition of mixtures of vinyl polymers and lignocellulosic materials

E Jakab et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2001)

Article Engineering, Environmental

The kinetics of methane steam reforming over a Ni/α-Al2O catalyst

KH Hou et al.

CHEMICAL ENGINEERING JOURNAL (2001)

Article Polymer Science

Acceleration of cellulose co-pyrolysis with polymer

Y Matsuzawa et al.

POLYMER DEGRADATION AND STABILITY (2001)

Article Chemistry, Physical

Catalytic steam reforming of bio-oils for the production of hydrogen: effects of catalyst composition

L Garcia et al.

APPLIED CATALYSIS A-GENERAL (2000)