4.7 Article

In Situ X-ray Photoelectron Spectroscopy (XPS) Demonstrated Graphdiyne (g-CnH2n-2) Based GDY-CuI/NiV-LDH Double S-Scheme Heterojunction for Efficient Photocatalytic Hydrogen Evolution

Related references

Note: Only part of the references are listed.
Article Chemistry, Analytical

Ni-CaO bifunctional catalyst for biomass catalytic pyrolysis to produce hydrogen-rich gas

Wenchang Yue et al.

Summary: In this study, catalytic pyrolysis of corn cob in a fixed-bed reaction system was used to achieve high-value conversion of biomass energy and produce hydrogen-rich gas. The effects of synthesis temperature and catalyst metal ratio on the pyrolysis gas composition, yield, and hydrogen conversion were investigated. The results showed that the Ni1Ca7-750 catalyst had excellent properties and achieved the highest H2 concentration, hydrogen yield, and hydrogen conversion.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2023)

Article Materials Science, Multidisciplinary

Construction of graphdiyne (CnH2n-2) based Co-S-P/CuI double S-scheme heterojunctions proved with in situ XPS characterization for efficient photocatalytic hydrogen production

Yueyang Zhang et al.

Summary: The promotion of GDY on the photocatalytic system was investigated using Co-S-P/CuI double S-scheme heterojunctions. The results showed that this structure provided abundant active sites, facilitated visible light injection, and exhibited excellent hydrogen precipitation activity and photocorrosion resistance.

APPLIED MATERIALS TODAY (2023)

Article Chemistry, Physical

Enhanced Photocatalytic H2O2 Production over Inverse Opal ZnO@ Polydopamine S-Scheme Heterojunctions

Gaowei Han et al.

Summary: This study investigates the efficient production of H2O2 using a PDA-modified inverse opal-structured porous ZnO photocatalyst. The PDA modification enhances the adsorption capacity and active sites of the photocatalyst, improves light absorption, charge separation, and redox capability. The resulting photoelectrode exhibits high H2O2 production performance.

ACTA PHYSICO-CHIMICA SINICA (2022)

Article Chemistry, Physical

NiAl-LDH In-Situ Derived Ni2P and ZnCdS Nanoparticles Ingeniously Constructed S-Scheme Heterojunction for Photocatalytic Hydrogen Evolution

Youlin Wu et al.

Summary: Surface modification of photocatalytic materials is an effective way to enhance their semiconductor activity. By utilizing a simple surface modification strategy and constructing abundant active sites, the photocatalytic activity can be improved. The introduction of NiAl-LDH-P can enhance the utilization of Zn0.5Cd0.5S on solar energy and promote the transfer rate of photogenerated carriers. The construction of the Zn0.5Cd0.5S/NiAl-LDH-P S-scheme heterojunction can change the hydrogen evolution site and improve the activity and stability of hydrogen production.

CHEMCATCHEM (2022)

Article Chemistry, Multidisciplinary

2D CeO2 and a Partially Phosphated 2D Ni-Based Metal-Organic Framework Formed an S-Scheme Heterojunction for Efficient Photocatalytic Hydrogen Evolution

Haiming Gong et al.

Summary: An S-scheme heterojunction was constructed by modifying the surface of Ni-based metal-organic framework (Ni-MOF) through different in situ treatment strategies. The in situ formation of NiS2, NiO, and Ni2P on the Ni-MOF surface improved the hydrogen production activity by accepting electrons from the conduction band of Ni-MOF. Coupling 2D CeO2 with Ni-MOF/P successfully built the S-scheme heterojunction, leading to a significantly higher hydrogen production rate.

LANGMUIR (2022)

Article Chemistry, Physical

Construction of a tandem S-scheme GDY/CuI/CdS-R heterostructure based on morphology-regulated graphdiyne (g-CnH2n-2) for enhanced photocatalytic hydrogen evolution

Zhiliang Jin et al.

Summary: Graphdiyne (GDY), as a new two-dimensional carbon hybrid material, has garnered attention for its good conductivity, adjustable electronic structure, and unique electron transfer enhancement properties, showing great potential in the field of photocatalytic hydrogen evolution by water splitting. This study successfully prepared GDY using the cross-coupling method and obtained 0.05CIGCS-R with excellent photocatalytic performance through morphology modulation. The photocatalytic hydrogen evolution rates of 0.05CIGCS-R were significantly higher than those of pure GDY and CdS-R, showcasing the promising application of GDY in photocatalysis and the construction of a tandem S-scheme heterojunction.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Article Materials Science, Multidisciplinary

Graphdiyne based GDY/CuI/NiO parallel double S-scheme heterojunction for efficient photocatalytic hydrogen evolution

Zhiliang Jin et al.

Summary: This study constructed a GDY/CuI/NiO heterostructure photocatalytic system and demonstrated its excellent photocatalytic performance and stability. Amorphous GDY provided more active sites for hydrogen evolution, while the construction of heterojunction promoted electron transfer and played a crucial role in enhancing hydrogen production activity.

2D MATERIALS (2022)

Article Chemistry, Multidisciplinary

Construct 3D NiCo-LDH/Cu2O p-n heterojunction via electrostatic self-assembly for enhanced photocatalytic hydrogen evolution

Zhaobo Fan et al.

Summary: The hydrogen evolution of inorganic photocatalysts is a hot research topic. By constructing p-n type heterojunctions, an internal electric field is formed to prevent charge diffusion and promote the migration of photocarriers. The two-dimensional thin sheet structure of flower cluster NiCo-LDH prevents the agglomeration of Cu2O. The composite catalyst shows significantly increased efficiency in hydrogen evolution under specific conditions, providing an innovative strategy for photocatalytic hydrogen production.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2022)

Article Chemistry, Multidisciplinary

Bridging Effect of S-C Bond for Boosting Electron Transfer over Cubic Hollow CoS/g-C3N4 Heterojunction toward Photocatalytic Hydrogen Production

Zhaobo Fan et al.

Summary: The construction of interfacial effects and chemical bonds between catalysts can effectively facilitate photogenerated electron transfer. In this study, a novel catalyst was successfully constructed and connected with a photocatalyst through a chemical bond, acting as a bridge for electron transmission. Furthermore, it was found that this chemical bond can rapidly transfer photogenerated carriers and achieve high-efficiency hydrogen evolution. The experimental results showed that this structure can enhance the hydrogen production compared to traditional materials.

LANGMUIR (2022)

Article Engineering, Chemical

Lotus-leaf-like Bi2O2CO3 nanosheet combined with Mo2S3 for higher photocatalytic hydrogen evolution

Junke Li et al.

Summary: The exploration of multiple composite materials with heterojunction structures is important for high-yield hydrogen photocatalytic evolution. In this study, a Mo2S3/Bi2O2CO3 composite with a unique n-n heterojunction and 2D spatial structure was successfully prepared. The composite material with 3% Bi2O2CO3 exhibited the highest photocatalytic effect.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Article Chemistry, Physical

Mo-N Bonds Effect Between MoSx Coupling With CoN For Efficient Photocatalytic Hydrogen Production

Hai Liu et al.

Summary: The facet-engineered surface and interface design in the preparation of efficient photocatalysts has attracted much attention. In this study, 3D MoSx was prepared using Polyvinylpyrrolidone (PVP) as a morphological modifier. CoN was added as an electron acceptor to greatly improve the hydrogen evolution performance of MoSx. The results showed that MoSx@CoN exhibited high hydrogen production activity and stability, providing new insights for the preparation of highly efficient photocatalytic hydrogen evolution materials.

CHEMCATCHEM (2022)

Article Materials Science, Multidisciplinary

EDA-assisted synthesis of multifunctional snowflake-Cu2S/CdZnS S-scheme heterojunction for improved the photocatalytic hydrogen evolution

Guorong Wang et al.

Summary: This study successfully improved the efficiency of solar photocatalytic water decomposition for hydrogen production by constructing a 2%Cu2S/CZS step-scheme heterojunction. The introduction of Cu2S has advantages of reducing particle agglomeration, broadening the light response range, and accelerating charge separation and transfer.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Article Engineering, Chemical

Graphdiyne (g-CnH2n-2) based Co3S4 anchoring and edge-covalently modification coupled with carbon-defects g-C3N4 for photocatalytic hydrogen production

Kaicheng Yang et al.

Summary: In this research, a nano hybrid material was developed for efficient photocatalytic hydrogen evolution. The material has a unique structure and porous framework that allows for multivariate collaborative catalysis. Additionally, it exhibits excellent charge transfer rate and lower carrier recombination rate, resulting in smaller hydrogen evolution overpotential.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Article Chemistry, Physical

Graphdiyne(CnH2n-2)-Based NiCo LDH - Graphdiyne - CuI Double S-Scheme Heterojunction For Efficient Photocatalytic Hydrogen Production

Yueyang Zhang et al.

Summary: In this paper, GDY-CuI binary heterojunctions were prepared by the one-pot method, and then combined with different morphologies of NiCoLDH to form NiCoLDH-CuI-GDY double S-scheme heterojunction catalysts. The catalysts showed excellent hydrogen precipitation activity, providing a new strategy for the construction of efficient and environmentally friendly multicatalytic systems.

CHEMPHOTOCHEM (2022)

Article Chemistry, Physical

In2O3-Modified Three-Dimensional Nanoflower MoSx Form S-scheme Heterojunction for Efficient Hydrogen Production

Hongying Li et al.

Summary: By regulating the morphology and constructing heterojunction, a three-dimensional nanoflower morphology MoSx/In2O3 composite catalyst was prepared, which significantly improved the hydrogen evolution activity and solved the light absorption issue of In2O3.

ACTA PHYSICO-CHIMICA SINICA (2022)

Review Chemistry, Applied

Heterogeneous N-coordinated single-atom photocatalysts and electrocatalysts

Rongchen Shen et al.

Summary: This review focuses on the intrinsic electronic structure, catalytic mechanism, and activity of metal-nitrogen-based single-atom catalysts (SACs) in photocatalysis and electrocatalysis. By analyzing the fundamentals of M-N-based SACs and combining theoretical calculations and experimental investigations, a comprehensive understanding of the improved coordination structure and observed activity is provided. Lastly, the challenges and prospects for constructing highly active M-N-based photocatalysis and electrocatalysis SACs are discussed.

CHINESE JOURNAL OF CATALYSIS (2022)

Article Chemistry, Physical

Rationally Designed Mn0.2Cd0.8S@CoAl LDH S-Scheme Heterojunction for Efficient Photocatalytic Hydrogen Production

Shanchi Liu et al.

Summary: A novel Mn0.2Cd0.8S@CoAl LDH (MCCA) S-scheme heterojunction photocatalyst was successfully constructed by efficiently coupling Mn0.2Cd0.8S nanorods and CoAl LDH nanosheets. The photocurrent-time response results showed that the internal electric field of the MCCA S-scheme heterojunction can accelerate charge separation and electron transfer, effectively inhibiting the recombination of photogenerated electrons and holes. A significant improvement in photocatalytic hydrogen production activity was achieved.

ACTA PHYSICO-CHIMICA SINICA (2022)

Article Chemistry, Applied

Integration of 2D layered CdS/WO3 S-scheme heterojunctions and metallic Ti3C2 MXene-based Ohmic junctions for effective photocatalytic H2 generation

Junxian Bai et al.

Summary: A 2D/2D/2D layered heterojunction photocatalyst with cascaded 2D coupling interfaces was designed and constructed, which effectively promoted spatially directional charge separation and transport between CdS and WO3 nanosheets, resulting in an increased visible-light hydrogen evolution rate.

CHINESE JOURNAL OF CATALYSIS (2022)

Article Chemistry, Applied

Efficient photocatalytic hydrogen evolution over graphdiyne boosted with a cobalt sulfide formed S-scheme heterojunction

Zhiliang Jin et al.

Summary: Graphdiyne (GDY), a novel two-dimensional carbon hybrid material, has attracted significant attention due to its unique and excellent properties. This study reports new progress in the preparation of a composite material, Co9S8-GDY-CuI, using CuI powder as a catalytic material and a facile hydrothermal method. The Co9S8-GDY-CuI exhibited hydrogen production activity 10.29 times higher than that of pure GDY in the sensitization system. Characterization techniques provided evidence for the successful preparation of the material and its superior photocatalytic activity. A possible reaction mechanism and the effects of Co9S8 nanoparticles were also discussed.

CHINESE JOURNAL OF CATALYSIS (2022)

Article Engineering, Chemical

Rapid preparation and photocatalytic properties of octahedral Cu2O@Cu powders

Jiayuan Chang et al.

Summary: Octahedral Cu2O@Cu powders were prepared using a two-step liquid phase reduction method with glucose and thiourea dioxide as pre-reductant and secondary-reductant, enhancing their photocatalytic properties. Varying the content of thiourea dioxide led to the formation of different structures, with photocatalytic performance significantly improved in the presence of CuNPs under visible light irradiation.

ADVANCED POWDER TECHNOLOGY (2021)

Article Engineering, Chemical

Graphdiyne (g-CnH2n-2) Coupled with Co3O4 Formed a Zero-Dimensional/Two-Dimensional p-n Heterojunction for Efficient Hydrogen Evolution

Yue Cao et al.

Summary: Graphdiyne (GDY), an allotrope of carbon, has been successfully synthesized using CuI as a catalytic material, forming a heterojunction with Co3O4. The composite catalyst GO-15 exhibited significantly enhanced hydrogen evolution activity, attributed to factors like Co2+/Co3+ coexistence, internal electric field promotion of charge separation and diversion, increased active sites from the 0D/2D structure, and electron donation from eosin Y.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2021)

Editorial Material Energy & Fuels

Solar Photocatalysis

Jiaguo Yu et al.

SOLAR RRL (2021)

Review Chemistry, Multidisciplinary

Vacancy Engineering in Semiconductor Photocatalysts: Implications in Hydrogen Evolution and Nitrogen Fixation Applications

Ashish Kumar et al.

Summary: Surface modification and defect engineering are effective methods to improve the photocatalytic performance of materials. Defect engineering can tune the optical, charge separation, and surface properties of materials, aiding in the adsorption of reactants.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Physical

Pristine hexagonal CdS assembled with NiV LDH nanosheet formed p-n heterojunction for efficient photocatalytic hydrogen evolution

Mengxue Yang et al.

Summary: Efficient charge utilization in photocatalysis is crucial for improving photocatalytic hydrogen evolution and achieving excellent performance of semiconductors. By providing an additional electric field, the migration efficiency of electron-hole pairs can be improved, allowing for the assembly of a novel p-n heterojunction photocatalyst named CNV-2. This combination of CdS and NiV LDH enhances photocatalytic hydrogen-production efficiency and has potential for water-splitting reaction and energy storage.

APPLIED SURFACE SCIENCE (2021)

Article Chemistry, Physical

Effect of phosphating on NiAl-LDH layered double hydroxide form S-scheme heterojunction for photocatalytic hydrogen evolution

Dujuan Li et al.

Summary: The phosphating process transforms NiAl-LDH into Ni2P with strong adsorption characteristics, which can participate in photocatalytic reactions and provide a 3D reaction site for photoelectrons. The S-scheme interface heterojunction can improve the utilization of electrons and increase the efficiency of hydrogen evolution in NiAl-LDH.

MOLECULAR CATALYSIS (2021)

Article Chemistry, Multidisciplinary

A New Allotrope of Carbon-Graphdiyne (g-CnH2n-2) Boosting with Mn0.2Cd0.8S form S-Scheme Heterojunction for Efficient Photocatalytic Hydrogen Evolution

Zhiliang Jin et al.

Summary: By modifying Mn0.2Cd0.8S (MCS) solid solution with graphdiyne/CuI, the performance of the photocatalyst was significantly improved, achieving efficient hydrogen production. The S-scheme heterojunction constructed between graphdiyne and MCS greatly enhanced the transfer rate of photoinduced electrons.

ADVANCED MATERIALS INTERFACES (2021)

Article Green & Sustainable Science & Technology

Efficient ZnS-ZnO/ZnAl-LDH composite for H2 production by photocatalysis

J. Jose Gil et al.

RENEWABLE ENERGY (2020)

Article Chemistry, Physical

Dodecahedron ZIF-67 anchoring ZnCdS particles for photocatalytic hydrogen evolution

Haiming Gong et al.

MOLECULAR CATALYSIS (2020)

Review Chemistry, Physical

Perovskite Oxide Based Materials for Energy and Environment-Oriented Photocatalysis

Ashish Kumar et al.

ACS CATALYSIS (2020)

Article Chemistry, Applied

Controllable design of Zn-Ni-P on g-C3N4 for efficient photocatalytic hydrogen production

Yanbing Li et al.

CHINESE JOURNAL OF CATALYSIS (2019)

Review Chemistry, Multidisciplinary

Toward practical solar hydrogen production - an artificial photosynthetic leaf-to-farm challenge

Jin Hyun Kim et al.

CHEMICAL SOCIETY REVIEWS (2019)

Article Chemistry, Multidisciplinary

Efficient Hydrogen Production on a 3D Flexible Heterojunction Material

Huidi Yu et al.

ADVANCED MATERIALS (2018)

Article Chemistry, Physical

g-C3N4/Ti3C2Tx (MXenes) composite with oxidized surface groups for efficient photocatalytic hydrogen evolution

Yuliang Sun et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Review Chemistry, Multidisciplinary

Progress in Research into 2D Graphdiyne-Based Materials

Changshui Huang et al.

CHEMICAL REVIEWS (2018)

Article Chemistry, Multidisciplinary

Sulfone-containing covalent organic frameworks for photocatalytic hydrogen evolution from water

Xiaoyan Wang et al.

NATURE CHEMISTRY (2018)

Review Chemistry, Physical

Advanced Progress in the Synthesis of Graphdiyne

Zhou Jingyuan et al.

ACTA PHYSICO-CHIMICA SINICA (2018)

Review Chemistry, Physical

Chemical Modification and Functionalization of Graphdiyne

Li Yongjun et al.

ACTA PHYSICO-CHIMICA SINICA (2018)

Review Chemistry, Physical

A review of hydrotalcite based catalysts for hydrogen production systems

U. Sikander et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Article Multidisciplinary Sciences

A tunable azine covalent organic framework platform for visible light-induced hydrogen generation

Vijay S. Vyas et al.

NATURE COMMUNICATIONS (2015)

Article Chemistry, Physical

Graphdiyne for high capacity and long-life lithium storage

Changshui Huang et al.

NANO ENERGY (2015)

Article Chemistry, Multidisciplinary

Architecture of graphdiyne nanoscale films

Guoxing Li et al.

CHEMICAL COMMUNICATIONS (2010)

Article Chemistry, Multidisciplinary

Synthesis and properties of annulenic subunits of graphyne and graphdiyne nanoarchitectures

Michael M. Haley

PURE AND APPLIED CHEMISTRY (2008)