☆ 4.7 Review

Recent Advances and Perspectives of Copyrolysis of Biomass and Organic Solid Waste

ENERGY & FUELS (2023)

Related references

Note: Only part of the references are listed.
Article Energy & Fuels

Comparative study on the synergistic co-pyrolysis of Thlaspi arvense L. seed with different plastics: thermal behaviors, product distributions, and kinetics analysis

Yaqi Zhang et al.

Summary: The co-pyrolysis of plastics and biomass turns waste plastics into opportunities for fuel production. This study comparatively investigated the co-pyrolysis characteristics of different plastics (PE, PS, PVC) and Thlaspi arvenseL. seed (TS). The results showed that co-pyrolysis affected the thermal weight loss behavior and product distributions of the mixtures. Co-pyrolysis effectively inhibited the production of oxygenated compounds and led to changes in the generation of hydrocarbons and aromatic hydrocarbons.

BIOMASS CONVERSION AND BIOREFINERY (2023)

Add to Collection
Article Engineering, Environmental

Comparative life cycle assessment of co-pyrolysing sewage sludge and wastewater-grown microalgae for biofuel production

Amirah Syafika Mohd Nasir et al.

Summary: This study compared the life cycle assessment, global warming potential, energy recovery, and economic feasibility of biofuel production via pyrolysis of sewage sludge and microalgae alone or at different ratios. The co-pyrolysis scenarios showed 36-44% lower global warming potential compared to sewage sludge alone. Gas turbine was found to be more effective for energy recovery from pyrolysis gases, compensating for up to 28% of the energy requirement. The drying process accounted for the majority of energy consumption, highlighting the need for improved dewatering process for sustainability and profitability.

RESOURCES CONSERVATION AND RECYCLING (2023)

Add to Collection
Article Agricultural Engineering

Co-pyrolysis of biomass and waste tires under high-pressure two-stage fixed bed reactor

Fengchao Wang et al.

Summary: This study investigated the distribution of biomass pyrolysis products under high pressure, confirming the synergistic effect between side wall rubber and pine sawdust under pressurized conditions. The quality of pressurized co-pyrolysis products can be enhanced using calcined bottom ash and rubber char, but the chars obtained under high pressure conditions exhibited melting and cross-linking issues.

BIORESOURCE TECHNOLOGY (2022)

Add to Collection
Article Environmental Sciences

Technologies for municipal solid waste management: Current status, challenges, and future perspectives

Shamshad Khan et al.

Summary: This study found that MSW generation is increasing in provinces such as Shandong, Guangdong, Zhejiang, and Fujian, but declining in other eastern coastal cities, provinces, and special zones. Municipal solid waste in China is mainly treated using landfill, incineration, and composting techniques, with significantly lower usage efficiency than in developed countries. The effectiveness of China's municipal waste management system needs to be improved.

CHEMOSPHERE (2022)

Add to Collection
Article Thermodynamics

Synergistic effect on thermal behavior and product characteristics during co-pyrolysis of biomass and waste tire: Influence of biomass species and waste blending ratios

Miaomiao Niu et al.

Summary: This work aims to understand the co-pyrolysis synergy between different biomass and waste tire for high value utilization. Thermal behavior, product yields and characteristics were analyzed to study the influence of biomass species and blending ratios on co-pyrolysis synergistic effect. The results showed positive synergistic effects on char and liquid production, with weakened synergy in liquid production when waste tire was blended. Co-pyrolysis also had positive synergistic effects on CO and CO2 generation, but negative synergistic effects on H2 and CH4 content.

ENERGY (2022)

Add to Collection
Article Thermodynamics

Catalytic potential of low-cost natural zeolite and influence of various pretreatments of biomass on pyro-oil up-gradation during co-pyrolysis with scrap rubber tires

Shoaib Raza Khan et al.

Summary: This study investigates the impact of low-cost natural zeolite catalyst, metallic content, and various pretreatments of rice straw on the quality and quantity of oil derived from co-pyrolysis and catalytic co-pyrolysis with scrap rubber tires. The results show that the catalytic combination of pretreated RS-SRT is an effective route to improve product quality, with catalyst incorporation further enhancing the results.

ENERGY (2022)

Add to Collection
Article Materials Science, Multidisciplinary

Production and Optimization of Energy Rich Biofuel through Co-Pyrolysis by Utilizing Mixed Agricultural Residues and Mixed Waste Plastics

Chirag Vibhakar et al.

Summary: This study uses agricultural residues and mixed plastic wastes to recover energy rich biofuel and value-added chemicals through copyrolysis experiments. The effects of different factors on product distributions are analyzed and addressed. The results show that there are positive synergistic effects between biomass and plastics during copyrolysis, leading to higher yield of volatiles. The optimal performance is achieved when 60% waste plastics are added, with a yield of 60.42 wt%. The oil products obtained under favorable conditions have a higher heating value compared to biomass pyrolysis products.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2022)

Add to Collection
Article Energy & Fuels

Co-pyrolysis of polyethylene terephthalate and poplar wood: influence of zeolite catalyst on coke formation

Yousef Keramatian et al.

Summary: This study investigated the migration pathway of oxygen from poplar wood and PET feedstocks into the products through co-pyrolysis in the presence or absence of zeolite catalyst. The results showed that co-pyrolysis and the zeolite catalyst influenced the properties of the products, particularly the yields of tar, char, wax, and gases. The zeolite catalyst enhanced the cracking reactions and deoxygenation, leading to the formation of more light organics in the tar. Additionally, it affected the structure of char but not the structure of wax significantly.

BIOMASS CONVERSION AND BIOREFINERY (2022)

Add to Collection
Review Agricultural Engineering

Review on synergistic effects during co-pyrolysis of biomass and plastic waste: Significance of operating conditions and interaction mechanism

Samy Berthold Engamba Esso et al.

Summary: This paper reviews the synergistic effect during the co-pyrolysis of plastic waste and biomass and considers various factors that influence this effect. The study reveals that the transfer of active hydrogen radicals, catalytic activity of alkaline metal species in biomass, and heat and mass transfer during the co-conversion are the main mechanisms of the synergistic effect.

BIOMASS & BIOENERGY (2022)

Add to Collection
Article Chemistry, Applied

Co-pyrolysis of industrial sludge and rice straw: Synergistic effects of biomass on reaction characteristics, biochar properties and heavy metals solidification

Bo Peng et al.

Summary: This study focuses on the co-pyrolysis of sludge and biomass to produce biochar with solidification of heavy metals. The study investigates the synergistic coupling mechanism, surface functional groups, and pore structure characteristics of the co-pyrolytic biochar. It also examines the solidification characteristics and mechanism of heavy metals. The results show that co-pyrolysis prolongs the decomposition process and enhances the solidification effect of heavy metals, leading to a high-quality biochar with lower heavy metal risk.

FUEL PROCESSING TECHNOLOGY (2022)

Add to Collection
Article Green & Sustainable Science & Technology

Effects of volatiles on properties of char during sequential pyrolysis of PET and cellulose

Chao Li et al.

Summary: The interaction of volatiles in co-pyrolysis of plastics and biomass affects the properties of pyrolysis products. In this study, cellulose and polyethylene terephthalate (PET) were subjected to sequential pyrolysis at 600°C to explore the specific influences of volatiles on char evolution. It was found that cellulose-derived oxygen-rich radicals promoted cracking of the organic component on the PET-derived char, reducing char yield and increasing the formation of heavy organic products. Additionally, cellulose-derived volatiles reacted with PET-derived volatiles to form more phenolics.

RENEWABLE ENERGY (2022)

Add to Collection
Article Environmental Sciences

Influence of corn straw on distribution and migration of nitrogen and heavy metals during microwave-assisted pyrolysis of municipal sewage sludge

Yingwen Zhang et al.

Summary: This study investigated the pyrolysis characteristics, nitrogen transformation, and heavy metal migration during microwave-assisted pyrolysis of municipal sewage sludge. The results showed that higher temperatures and more corn straw resulted in increased gas yield and decreased char yield. The addition of 5% corn straw at 750 degrees C produced high-quality bio-oil with fewer oxygen-containing compounds. The residual ratio of heavy metals in sludge char ranged from 67.74% to 100%, and the concentrations of heavy metals met the national standard, indicating a slight potential ecological risk.

SCIENCE OF THE TOTAL ENVIRONMENT (2022)

Add to Collection
Article Green & Sustainable Science & Technology

Characteristics of Biochars Derived from the Pyrolysis and Co-Pyrolysis of Rubberwood Sawdust and Sewage Sludge for Further Applications

Liaqat Ali et al.

Summary: This study investigated the characteristics of biochars derived from the pyrolysis of rubberwood sawdust and sewage sludge, both individually and in different mixing ratios. The biochars were characterized in terms of their carbon content, oxygen content, ash content, elemental composition, functional groups, pH, surface area, pore diameter, water holding capacity, and water releasing ability. The results showed that the mixing of rubberwood sawdust and sewage sludge enhanced the gross and element contents of the biochar samples. Moreover, the study provided insights into the chemical and physical properties of the biochars, which could guide their further application and study.

SUSTAINABILITY (2022)

Add to Collection
Article Environmental Sciences

Biochar Derived from Pyrolysis of Common Agricultural Waste Feedstocks and Co-pyrolysis with Low-Density Polyethylene Mulch Film

Ibrahim Cisse et al.

Summary: This study investigated the characteristics of biochar generated from pyrolysis of agricultural wastes and co-pyrolysis of these wastes with agricultural mulch films. The results showed that the biochar produced from these materials is suitable for soil amendment applications, and co-pyrolysis had a minimal impact on the properties of the biochar.

WASTE AND BIOMASS VALORIZATION (2022)

Add to Collection
Article Energy & Fuels

Study on the co-pyrolysis characteristics of sewage sludge and wood powder and kinetic analysis

Jun Zhang et al.

Summary: The study found a strong synergistic effect between sewage sludge and wood powder during co-pyrolysis, resulting in increased gas yield and decreased char yield, improving resource utilization and product characteristics. The proportion of wood powder has a significant impact on co-pyrolysis characteristics and the degree of synergistic effect.

BIOMASS CONVERSION AND BIOREFINERY (2022)

Add to Collection
Article Green & Sustainable Science & Technology

Nitrogen transfer mechanism research on the co- pyrolysis macroalgae with polyethylene

Xuping Yang et al.

Summary: This study revealed the effect of co-pyrolysis and nitrogen transformation characteristics of macroalgae and waste plastics. Co-pyrolysis reduced the species and quantities of nitrogen-containing compounds, and provided hydrogen radicals to promote the mechanism of nitrogen during the pyrolysis process.

SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS (2022)

Add to Collection
Article Chemistry, Multidisciplinary

Pyrolysis of lignocellulosic biomass with high-density polyethylene to produce chemicals and bio-oil with high liquid yields

Witchakorn Charusiri et al.

Summary: The pyrolysis of waste plastic and lignocellulosic material feedstocks increases the hydrogen/carbon ratio of the mixture, potentially refining the properties of pyrolysis oil. Increasing the temperature to 600 degrees C promoted pyrolysis oil production, while further increasing it to 650 degrees C resulted in a decrease due to secondary cracking reactions.

SUSTAINABLE CHEMISTRY AND PHARMACY (2022)

Add to Collection
Article Thermodynamics

Co-pyrolysis for bio-oil production via fixed bed reactor using date seeds and plastic waste as biomass

Abrar Inayat et al.

Summary: This study investigates the potential of using plastic waste and date seeds for co-pyrolysis to produce bio-oil. Experimental results show that adjusting the temperature and plastic ratio can enhance the bio-oil yield and reduce the bio-char content. Therefore, co-pyrolysis of plastic waste and date seeds can be a sustainable biofuel production method in the UAE.

CASE STUDIES IN THERMAL ENGINEERING (2022)

Add to Collection
Review Green & Sustainable Science & Technology

Microwave pyrolysis of sludge: a review

Shaobai Li et al.

Summary: Microwave pyrolysis, an environmentally friendly energy recovery technology, has great potential in sludge resource treatment. This paper provides a comprehensive review of the progress in microwave pyrolysis of sludge, focusing on the mechanisms and development status of microwave pyrolysis equipment. The effects of various factors on microwave pyrolysis efficiency and products are discussed, and it is suggested that controlling target products can be achieved by adjusting pyrolysis conditions and exploring harmful byproducts. Future research directions are proposed to facilitate the wide application of microwave pyrolysis technology in sludge treatment.

SUSTAINABLE ENVIRONMENT RESEARCH (2022)

Add to Collection
Article Energy & Fuels

Behavior Study of Migration and Transformation of Heavy Metals during Oily Sludge Pyrolysis

Cui Quan et al.

Summary: This paper studied the migration, transformation, leaching toxicity, and risk assessment of heavy metals in oily sludge pyrolysis. The results showed that heavy metals were enriched in char and the leaching concentration of some heavy metals decreased after pyrolysis, while others increased. The findings also suggested that pyrolysis reduced the environmental risk of some heavy metals, but increased the risk of others.

ENERGY & FUELS (2022)

Add to Collection
Article Environmental Sciences

Co-pyrolysis of neem wood bark and low-density polyethylene: influence of plastic on pyrolysis product distribution and bio-oil characterization

Venkatachalam Selvaraj Kaushik et al.

Summary: This study investigated the effect of plastic during co-pyrolysis with biomass in a fixed reactor. The results showed that co-pyrolysis increased the yield and quality of bio-oil while decreasing the oxygenated compounds.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2022)

Add to Collection
Article Green & Sustainable Science & Technology

Influence of plastic content on synergistic effect and bio-oil quality from the co-pyrolysis of waste rigid polyurethane foam and sawdust mixture

H. Stancin et al.

Summary: The study demonstrates that adding a small amount of polyurethane can reduce oxygenated compounds in sawdust and increase oil yield; however, the main liquid products are benzenamines that do not meet fuel composition requirements. Analysis of plastic content shows that liquid yield increases while gas yield decreases.

RENEWABLE ENERGY (2022)

Add to Collection
Article Engineering, Environmental

Waste tire rubber devulcanization technologies: State-of-the-art, limitations and future perspectives

Paulina Wisniewska et al.

Summary: Waste tire management is a major global environmental issue, and finding low-cost and industrial-scale tire recycling methods is gaining more attention. The sustainable development of rubber devulcanization technologies and the appropriate design of cradle-to-cradle loops for rubber goods are considered promising strategies for achieving a higher level of rubber recycling. This work presents an overview of patented waste tire rubber devulcanization technologies and discusses their performance characteristics, environmental aspects, and limitations. The findings show that the reclaimed rubbers described in patents have higher tensile strength and elongation break compared to literature data or commercial products, with significant differences attributed to devulcanization efficiency and rubber treatment conditions. Considering environmental and economic aspects, reactive extrusion is identified as the most promising method for further developing rubber devulcanization technologies.

WASTE MANAGEMENT (2022)

Add to Collection
Article Green & Sustainable Science & Technology

Techno-economic analysis and life cycle assessment of microwave co-pyrolysis of food waste and low-density polyethylene

Shukla Neha et al.

Summary: This paper presents a techno-economic analysis and life cycle assessment of microwave co-pyrolysis of food waste. The results show that a commercial-scale microwave co-pyrolysis plant has higher conversion efficiency, lower energy consumption, and offers an attractive economic return.

SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS (2022)

Add to Collection
Article Chemistry, Analytical

Co-pyrolysis re-use of sludge and biomass waste: Development, kinetics, synergistic mechanism and industrialization

Mingyan Ma et al.

Summary: Pyrolysis is an advanced waste disposal technology that can achieve harmless treatment and produce clean energy. Co-pyrolysis has the potential to improve traditional pyrolysis techniques and is considered a new generation of environmentally friendly energy production. However, there is a lack of existing reviews on co-pyrolysis of sludge with other biomass wastes, and a systematic review of its complex co-pyrolysis mechanisms is needed to guide future technological progress. The synergistic promotion mechanism is crucial for increasing product application pathways and economic viability.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2022)

Add to Collection
Article Chemistry, Analytical

A techno-economic study to evaluate the impacts of feedstock ratio on commercial scale co-pyrolysis plants of biomass and waste tire

Shoaib Raza Khan et al.

Summary: This study comprehensively investigates the techno-economic performance of six different ratios of rice straw and waste tire pyrolysis plants, and finds that the plant using 20% rice straw and 80% waste tire is the most economical alternative.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2022)

Add to Collection
Article Green & Sustainable Science & Technology

Co-thermal degradation characteristics of rice straw and sewage sludge

Thi Ngoc Lan Thao Ngo et al.

Summary: Co-thermal treatment of binary biomass mixtures can enhance the thermal degradation efficiency through a synergistic reaction. Adding sewage sludge (SS) to rice straw (RS) lowers the activation energy and improves volatile matter decomposition during pyrolysis. This study provides important insights for the commercial-scale plant design of SS and RS co-thermal treatment.

SUSTAINABLE ENVIRONMENT RESEARCH (2021)

Add to Collection
Article Engineering, Environmental

Co-pyrolysis of cyanobacteria and plastics to synthesize porous carbon and its application in methylene blue adsorption

Lixin Li et al.

Summary: The research found that pyrolyzing a mixture of cyanobacteria and polypropylene under different conditions can synthesize composite carbon materials with excellent performance in water contaminant removal, providing a new strategy for recycling water environment waste and synthesizing high-performance composite materials.

JOURNAL OF WATER PROCESS ENGINEERING (2021)

Add to Collection
Article Energy & Fuels

Influence of Char Intermediates on Synergistic Effects During Co-Pyrolysis of Pinewood and Polycarbonate

Xuan Liu et al.

Summary: The study on co-pyrolysis of pinewood and polycarbonate (PC) showed enhanced production of H-2, CO, and total syngas yields, as well as improved energy recovery efficiency. The results revealed that pinewood char catalytically enhanced PC degradation, while the impact of PC char on pinewood pyrolysis was minimal.

JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME (2021)

Add to Collection
Article Engineering, Environmental

Dynamic pyrolysis behaviors, products, and mechanisms of waste rubber and polyurethane bicycle tires

Xiaojie Tang et al.

Summary: This study investigated the pyrolysis behavior, gaseous products, and reaction mechanisms of waste bicycle tires (RT) and polyurethane tires (PUT) using thermogravimetry (TG), TG-Fourier transform infrared spectroscopy (TG-FTIR), and pyrolysis-gas chromato-graphy/mass spectrometry (Py-GC/MS). The results showed that the decomposition of PUT was easier compared to RT, as confirmed by kinetic, thermodynamic, and comprehensive pyrolysis index data. The pyrolysis mechanism models for RT were described by two-dimensional diffusion and two second-order models, while PUT was best described by three consecutive reaction-order models.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection
Article Engineering, Environmental

Synergistic effects, gaseous products, and evolutions of NOx, precursors during (co-)pyrolysis of textile dyeing sludge and bamboo residues

Jinwen Hu et al.

Summary: This study confirmed the synergistic effect of TDS and BR co-pyrolysis, showing significant impacts on the formation of NH3 and HCN, and enhancing the aromaticity of biochar.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection
Article Thermodynamics

Thermogravimetric and kinetic analysis of biomass and polyurethane foam mixtures Co-Pyrolysis

H. Stancin et al.

Summary: This study focuses on producing alternative fuels by co-pyrolysis of waste plastics and biomass, with a particular emphasis on the use of waste biomass like sawdust. Thermogravimetric analysis was conducted to determine the most appropriate mixture composition and parameters for thermal degradation process.

ENERGY (2021)

Add to Collection
Article Energy & Fuels

Production and physico-chemical properties analysis of co-pyrolytic oil derived from co-pyrolysis of scrap tires and sawdust

Sanowar Hossain et al.

Summary: The study found that the optimal bio-oil yield was obtained at a mixing ratio of 4:1 of scrap tires and sawdust, which also had higher calorific value compared to other ratios. The potential of the blend as an alternative fuel was also investigated by comparing it with conventional fuels.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2021)

Add to Collection
Article Engineering, Environmental

Co-pyrolysis and synergistic effect analysis of biomass sawdust and polystyrene mixtures for production of high-quality bio-oils

H. Stancin et al.

Summary: The use of traditional biomass raises sustainability concerns, but co-pyrolysis of biomass with waste materials, especially plastics, offers a promising alternative for enhanced biofuel production. This method can significantly improve the properties of biomass products, particularly bio-oils.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2021)

Add to Collection
Article Chemistry, Analytical

Co-pyrolysis of wood and plastic: Evaluation of synergistic effects and kinetic data by evolved gas analysis-mass spectrometry (EGA-MS)

Federica Nardella et al.

Summary: The co-pyrolysis of biomass and plastic mixtures was studied to investigate the mutual influence on their pyrolytic behaviors, showing synergistic effects. Component-specific thermograms were used to evaluate the presence of synergistic effects, and the KAS model was applied to determine the apparent activation energies of different components.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2021)

Add to Collection
Review Engineering, Environmental

Application of co-pyrolysis biochar for the adsorption and immobilization of heavy metals in contaminated environmental substrates

Yuanling Li et al.

Summary: This article summarizes recent advances in the development and application of co-pyrolysis biochar for the adsorption and immobilization of various heavy metals in contaminated environmental substrates. It includes the production, characteristics, and advantages of co-pyrolysis biochar, as well as the adsorption behaviors and mechanisms of different heavy metals in flue gas and wastewater. Additionally, the immobilization of heavy metals in both biochar itself and contaminated soils by co-pyrolysis biochar is discussed.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection
Article Thermodynamics

Thermo-catalytic co-pyrolysis of biomass and high-density polyethylene for improving the yield and quality of pyrolysis liquid

Md Hafizur Rahman et al.

Summary: The research focused on studying the effects of temperature and pine-to-HDPE ratios on pyrolysis products. Catalytic pyrolysis of HDPE resulted in over 90% selectivity towards gasoline-range hydrocarbons, while pine showed a gasoline selectivity of 69.3%. Addition of HDPE increased gasoline selectivity by improving the hydrogen/carbon effective ratio. Optimal yield and higher gasoline selectivity were achieved at pine to HDPE ratios of 0/100 and 25/75.

ENERGY (2021)

Add to Collection
Article Thermodynamics

Multivariate optimisation study and life cycle assessment of microwave-induced pyrolysis of horse manure for waste valorisation and management

Guo Ren Mong et al.

Summary: The study demonstrates that using microwave pyrolysis to process horse manure for the production of bio-fuels and bio-chemicals is effective in generating products with increased energy density and potential environmental advantages.

ENERGY (2021)

Add to Collection
Article Energy & Fuels

Cost-effective sulfurized sorbents derived from one-step pyrolysis of wood and scrap tire for elemental mercury removal from flue gas

Yang Xu et al.

Summary: Sulfurized chars derived from wood and scrap tire pyrolysis were developed as cost-effective sorbents for capturing elemental mercury (Hg-0) from flue gas. The synergistic effect between wood and tire during co-pyrolysis enhanced the Hg-0 capture capability of the sulfurized chars. Chemisorption dominated the Hg-0 removal process, with organic sulfur/elemental sulfur serving as active components for Hg-0 oxidization into HgS.

FUEL (2021)

Add to Collection
Article Engineering, Environmental

Migration characteristics of heavy metals during sludge pyrolysis

Zhiyuan Zhang et al.

Summary: The study found that sludge pyrolysis is a multi-step process, with the activation energy increasing with the pyrolysis conversion rate. The thermal volatilities of heavy metals at 850 degrees Celsius followed the sequence Cu < Cr < Ni < Mn < Pb < As < Zn < Cd = Hg.

WASTE MANAGEMENT (2021)

Add to Collection
Article Energy & Fuels

Towards enhanced understanding of synergistic effects in co-pyrolysis of pinewood and polycarbonate

Xuan Liu et al.

Summary: The study investigated the synergistic effects and mechanism of co-pyrolysis of pinewood and polycarbonate, showing enhanced H2 and CO yields, as well as increased overall syngas production and energy recovery efficiency. Various component interactions were analyzed to gain insights into the synergistic mechanism, with volatiles-volatiles interactions playing a primary role in enhancing gas production. This research contributes to a better understanding of co-pyrolysis for designing efficient energy recovery systems from lignocellulosic biomass and polycarbonate wastes.

APPLIED ENERGY (2021)

Add to Collection
Article Chemistry, Analytical

Investigation of biomass and agricultural plastic co-pyrolysis: Effect on biochar yield and properties

Dilani Rathnayake et al.

Summary: The complete separation of mixed plastic and biomass waste is complex and costly. Co-pyrolysis of these agricultural waste streams with low levels of plastic contamination can produce stable forms of carbon for various applications. High levels of plastic contamination in feedstock negatively impact biochar yield and can result in phytotoxic effects, while low levels can have a positive impact.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2021)

Add to Collection
Review Thermodynamics

Co-pyrolysis of waste plastic and solid biomass for synergistic production of biofuels and chemicals-A review

Zhiwei Wang et al.

Summary: The study focuses on co-pyrolysis of waste plastic and solid biomass mixtures, which can provide synergistic enhancement for fuels and value-added products, and foster eco-friendly pathways for waste management and sustainability. The paper discusses the properties of different feedstocks and experimental methods for co-pyrolysis, as well as characteristics of co-pyrolysis reactors and catalytic methods.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2021)

Add to Collection
Article Engineering, Environmental

Thermal behaviour and kinetic study of co-pyrolysis of microalgae with different plastics

Rongjie Chen et al.

Summary: The coexistence of microalgae and plastics in the ocean poses challenges to the environment, but co-pyrolysis of microalgae and plastics can reduce solid residues. The co-pyrolysis of different plastic blends with microalgae affects the generation of solid residues.

WASTE MANAGEMENT (2021)

Add to Collection
Article Agricultural Engineering

Products distribution and interaction mechanism during co-pyrolysis of rice husk and oily sludge by experiments and reaction force field simulation

Yanjun Wen et al.

Summary: This study explored the co-pyrolysis behavior of rice husk and oily sludge through experiments and simulations, revealing a synergistic effect that led to the production of more bio-oil and low molecular weight molecules. The activation energy of both components was reduced during co-pyrolysis, and the mechanism of this synergistic effect was studied by analyzing free radical intermediates.

BIORESOURCE TECHNOLOGY (2021)

Add to Collection
Article Engineering, Environmental

Co-pyrolytic mechanisms and products of textile dyeing sludge and durian shell in changing operational conditions

Hui Liu et al.

Summary: This study filled the knowledge gaps about the co-pyrolysis mechanisms and products of textile dyeing sludge (TDS), with findings suggesting that high temperature pyrolysis in CO2 atmosphere is the best option for waste reduction. The interaction between TDS and durian shell (DS) residues influenced the composition of products, promoting the production of specific compounds.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection
Article Computer Science, Interdisciplinary Applications

Recent developments on sewage sludge pyrolysis and its kinetics: Resources recovery, thermogravimetric platforms, and innovative prospects

Salman Raza Naqvi et al.

Summary: This study critically reviews recent advancements in sewage sludge pyrolysis and its kinetics, aiming to identify optimal operating conditions and design parameters, and discuss the challenges associated with extracting biofuels and resource recovery from sewage sludge.

COMPUTERS & CHEMICAL ENGINEERING (2021)

Add to Collection
Article Chemistry, Analytical

Process intensification on co-pyrolysis of polyethylene terephthalate wastes and biomass via microwave energy: Synergetic effect and roles of microwave susceptor

Zhenyu Zhao et al.

Summary: This study utilizes microwave energy to enhance the co-pyrolysis of PET wastes and biomass, finding a synergistic effect between PET and biomass in producing value-added organic compounds suitable for gasoline and kerosene. Additionally, carbon powder, Fe3O4, and CaO play different roles in the MAP process, facilitating the conversion of organic wastes.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2021)

Add to Collection
Article Engineering, Environmental

A study on co-pyrolysis mechanisms of biomass and polyethylene via ReaxFF molecular dynamic simulation and density functional theory

Yuzhuo Wang et al.

Summary: Co-pyrolysis of biomass and waste plastics is a long-term strategy for efficient waste management and valuable fuel generation. Studies show that polyethylene promotes the formation of long-chain alcohols while suppressing the generation of aldehydes and ketones, improving the quality of co-pyrolysis products.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2021)

Add to Collection
Article Green & Sustainable Science & Technology

Biomass waste conversion into value-added products via microwave-assisted Co-Pyrolysis platform

Dadi Suriapparao et al.

Summary: The study focuses on investigating the synergistic interactions between biomass and hydro-rich plastics in microwave co-pyrolysis. It was found that the overall energy efficiency in co-pyrolysis is significantly higher compared to that of biomass pyrolysis, with different biomass-plastic combinations affecting the yield and energy output of bio-oil.

RENEWABLE ENERGY (2021)

Add to Collection
Article Chemistry, Multidisciplinary

Co-pyrolysis of oil palm empty fruit bunch and oil palm frond with low-density polyethylene and polypropylene for bio-oil production

Mohammed Abobakr Al-Maari et al.

Summary: Co-pyrolysis of palm wastes with plastics can increase bio-oil yield, with different effects on the chemical composition depending on the types of waste and plastic used.

ARABIAN JOURNAL OF CHEMISTRY (2021)

Add to Collection
Article Energy & Fuels

Co-pyrolysis of sewage sludge and pinewood sawdust: the synergistic effect and bio-oil characteristics

Jisong Bai et al.

Summary: Co-pyrolysis of sewage sludge with pinewood sawdust was investigated using a thermogravimetric analyzer and fixed bed reactor. The results showed a significant synergistic effect between the two materials, with the highest bio-oil yield and changes in compound production observed at 50% sawdust addition. High temperatures were found to decrease certain compound production and increase hydrocarbon production during co-pyrolysis.

BIOMASS CONVERSION AND BIOREFINERY (2021)

Add to Collection
Article Engineering, Environmental

A mechanistic investigation of lignin dimer fast pyrolysis from reactive molecular dynamics simulation

Yuling Zhou et al.

Summary: The study investigates the fast pyrolysis process of a lignin dimer, DMPD, using the ReaxFF method, revealing that higher temperatures promote certain reaction products' formation and bond breaking. The research provides a better understanding of the complex pyrolysis mechanism of biomass from a molecular level.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Add to Collection
Review Engineering, Environmental

Co-pyrolysis of biomass and plastic wastes: A review on reactants synergy, catalyst impact, process parameter, hydrocarbon fuel potential, COVID-19

Khursheed B. Ansari et al.

Summary: Co-pyrolysis of biomass and plastic waste is considered a promising approach to convert them into useful end-products, especially in handling COVID-19 waste. It has the potential to produce high-quality bio-oil and involves synergistic effects between biomass and plastic, with and without catalysts, leading to efficient conversion processes.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Add to Collection
Article Engineering, Environmental

Thermokinetic analysis and product characterization of waste tire-hazelnut shell co-pyrolysis: TG-FTIR and fixed bed reactor study

Nejmi Soyler et al.

Summary: The study investigated the synergetic effects of waste tires and hazelnut shell biomass during co-pyrolysis, revealing an interaction that influenced product distribution and reaction kinetics. Analysis of pyrolytic oil from fixed bed experiments demonstrated improved properties due to co-pyrolysis.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Add to Collection
Review Biochemistry & Molecular Biology

Thermochemical conversion of sewage sludge for energy and resource recovery: technical challenges and prospects

Mian Hu et al.

Summary: Thermochemical processes are considered promising for sewage sludge management, but there are still many challenges. This review discusses the impact of sewage sludge on the environment, current treatment methods, and summarizes various thermochemical conversion technologies.

ENVIRONMENTAL POLLUTANTS AND BIOAVAILABILITY (2021)

Add to Collection
Review Green & Sustainable Science & Technology

Biomass pyrolysis: past, present, and future

Tamer Y. A. Fahmy et al.

ENVIRONMENT DEVELOPMENT AND SUSTAINABILITY (2020)

Add to Collection
Article Thermodynamics

Co-pyrolysis of sugarcane bagasse and waste high-density polyethylene: Synergistic effect and product distributions

H. Hassan et al.

ENERGY (2020)

Add to Collection
Review Agronomy

A review of thermochemical upgrading of pyrolysis bio-oil: Techno-economic analysis, life cycle assessment, and technology readiness

Yetunde Sorunmu et al.

GLOBAL CHANGE BIOLOGY BIOENERGY (2020)

Add to Collection
Article Environmental Sciences

Characteristics of biochars prepared by co-pyrolysis of sewage sludge and cotton stalk intended for use as soil amendments

Zhipu Wang et al.

ENVIRONMENTAL TECHNOLOGY (2020)

Add to Collection
Article Energy & Fuels

Co-pyrolysis of Sewage Sludge and Rice Straw: Thermal Behavior and Char Characteristic Evaluations

Qing Dong et al.

ENERGY & FUELS (2020)

Add to Collection
Article Chemistry, Applied

Catalytic Co-Pyrolysis of Lignin and Waste Rubber to Obtain Hydrocarbons and Phenols

Yong Cui et al.

JOURNAL OF BIOBASED MATERIALS AND BIOENERGY (2020)

Add to Collection
Article Green & Sustainable Science & Technology

Optimization studies of microwave-induced co-pyrolysis of empty fruit bunches waste truck tire using response surface methodology

Rubia Idris et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection
Article Engineering, Environmental

Solvothermal co-liquefaction of sugarcane bagasse and polyethylene under sub -supercritical conditions: Optimization of process parameters

Humair Ahmed Baloch et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2020)

Add to Collection
Article Engineering, Environmental

Enhancement of hydrocarbons production through co-pyrolysis of acid-treated biomass and waste tire in a fixed bed reactor

Shoaib Raza Khan et al.

WASTE MANAGEMENT (2020)

Add to Collection
Article Polymer Science

Effects of Different Conditions on Co-Pyrolysis Behavior of Corn Stover and Polypropylene

Fengze Wu et al.

POLYMERS (2020)

Add to Collection
Article Agricultural Engineering

Insight into synergistic effects of biomass-polypropylene co-pyrolysis using representative biomass constituents

Rongjie Chen et al.

BIORESOURCE TECHNOLOGY (2020)

Add to Collection
Article Energy & Fuels

Co-pyrolysis of waste tire and pine bark for syngas and char production

Zhiwei Wang et al.

FUEL (2020)

Add to Collection
Review Agricultural Engineering

A critical review of the production and advanced utilization of biochar via selective pyrolysis of lignocellulosic biomass

Yunchao Li et al.

BIORESOURCE TECHNOLOGY (2020)

Add to Collection
Article Energy & Fuels

Fuel and Chemical Properties of Waste Tire Pyrolysis Oil Derived from a Continuous Twin-Auger Reactor

Felipe Campuzano et al.

ENERGY & FUELS (2020)

Add to Collection
Article Energy & Fuels

Torrefaction of biomass and plastic from municipal solid waste streams and their blends: Evaluation of interactive effects

Yogeshwari Pooja Rago et al.

FUEL (2020)

Add to Collection
Article Engineering, Environmental

Comparative study for fluidized bed pyrolysis of textile dyeing sludge and municipal sewage sludge

Yang Liu et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Add to Collection
Article Energy & Fuels

Synergistic co-pyrolysis of polyolefin plastics with wood and agricultural wastes for biofuel production

John Nikko V. Salvilla et al.

APPLIED ENERGY (2020)

Add to Collection
Article Environmental Sciences

Co-pyrolysis of sewage sludge and rice husk/bamboo sawdust for biochar with high aromaticity and low metal mobility

Jin Zhang et al.

ENVIRONMENTAL RESEARCH (2020)

Add to Collection
Proceedings Paper Green & Sustainable Science & Technology

Biochar from Biomass Slow Pyrolysis

Nan Cai et al.

2020 2ND INTERNATIONAL CONFERENCE ON ENVIRONMENT SCIENCES AND RENEWABLE ENERGY (2020)

Add to Collection
Article Agricultural Engineering

Co-pyrolysis of microalgae and plastic: Characteristics and interaction effects

Ziyue Tang et al.

BIORESOURCE TECHNOLOGY (2019)

Add to Collection
Article Thermodynamics

Influence of the Addition of Cotton Stalk during Co-pyrolysis with Sewage Sludge on the Properties, Surface Characteristics, and Ecological Risks of Biochars

Zhipu Wang et al.

JOURNAL OF THERMAL SCIENCE (2019)

Add to Collection
Article Engineering, Environmental

Improving bio-oil properties through the fast co-pyrolysis of lignocellulosic biomass and waste tyres

Jon Alvarez et al.

WASTE MANAGEMENT (2019)

Add to Collection
Article Environmental Sciences

Effects of pyrolysis temperature and addition proportions of corncob on the distribution of products and potential energy recovery during the preparation of sludge activated carbon

Yuan Zhou et al.

CHEMOSPHERE (2019)

Add to Collection
Article Energy & Fuels

Impact of Common Plastics on Cellulose Pyrolysis

Shogo Kumagai et al.

ENERGY & FUELS (2019)

Add to Collection
Article Environmental Sciences

Synergistic effect of biomass and polyurethane waste co-pyrolysis on soot formation at high temperatures

Xuebin Wang et al.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2019)

Add to Collection
Article Engineering, Environmental

Assessment of upgrading ability and limitations of slow co-pyrolysis: Case of olive mill wastewater sludge/waste tires slow co-pyrolysis

Najla Grioui et al.

WASTE MANAGEMENT (2019)

Add to Collection
Article Thermodynamics

Insights into pyrolysis and co-pyrolysis of tobacco stalk and scrap tire: Thermochemical behaviors, kinetics, and evolved gas analysis

Rongjie Chen et al.

ENERGY (2019)

Add to Collection
Article Agricultural Engineering

Pyrolysis kinetics and synergistic effect in co-pyrolysis of Samanea saman seeds and polyethylene terephthalate using thermogravimetric analyser

Ranjeet Kumar Mishra et al.

BIORESOURCE TECHNOLOGY (2019)

Add to Collection
Article Agricultural Engineering

Comparative study on synergistic effects in co-pyrolysis of tobacco stalk with polymer wastes: Thermal behavior, gas formation, and kinetics

Rongjie Chen et al.

BIORESOURCE TECHNOLOGY (2019)

Add to Collection
Article Chemistry, Applied

Synergistic effects of biomass and polyurethane co-pyrolysis on the yield, reactivity, and heating value of biochar at high temperatures

Xuebin Wang et al.

FUEL PROCESSING TECHNOLOGY (2019)

Add to Collection
Review Environmental Sciences

Effect of pyrolysis temperature on characteristics, chemical speciation and risk evaluation of heavy metals in biochar derived from textile dyeing sludge

Xingdong Wang et al.

ECOTOXICOLOGY AND ENVIRONMENTAL SAFETY (2019)

Add to Collection
Article Energy & Fuels

Synergistic effects during co-pyrolysis of biomass and plastic: Gas, tar, soot, char products and thermogravimetric study

Qiming Jin et al.

JOURNAL OF THE ENERGY INSTITUTE (2019)

Add to Collection
Article Chemistry, Multidisciplinary

Upgrading biochar via co-pyrolyzation of agricultural biomass and polyethylene terephthalate wastes

Seok-Young Oh et al.

RSC ADVANCES (2019)

Add to Collection
Article Environmental Sciences

Dewatering and low-temperature pyrolysis of oily sludge in the presence of various agricultural biomasses

Song Zhao et al.

ENVIRONMENTAL TECHNOLOGY (2018)

Add to Collection
Article Thermodynamics

Degradation kinetic study of pyrolysis and co-pyrolysis of biomass with polyethylene terephthalate (PET) using Coats-Redfern method

Gautam Ganeshan et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2018)

Add to Collection
Article Energy & Fuels

Kinetics of synergistic effects in co-pyrolysis of biomass with plastic wastes

K. G. Burra et al.

APPLIED ENERGY (2018)

Add to Collection
Article Agricultural Engineering

Kinetics evaluation and thermal decomposition characteristics of co-pyrolysis of municipal sewage sludge and hazelnut shell

Bing Zhao et al.

BIORESOURCE TECHNOLOGY (2018)

Add to Collection
Article Thermodynamics

Rubber pyrolysis: Kinetic modeling and vulcanization effects

Sheng Liu et al.

ENERGY (2018)

Add to Collection
Article Thermodynamics

Analysis of catalytic pyrolysis of municipal solid waste and paper sludge using TG-FTIR, Py-GC/MS and DAEM (distributed activation energy model)

Shiwen Fang et al.

ENERGY (2018)

Add to Collection
Article Thermodynamics

Synergistic enhancement of product quality through fast co-pyrolysis of acid pretreated biomass and waste plastic

Yuan Xue et al.

ENERGY CONVERSION AND MANAGEMENT (2018)

Add to Collection
Article Thermodynamics

Study of synergistic effects during co-pyrolysis of cellulose and high-density polyethylene at various ratios

Haoran Yuan et al.

ENERGY CONVERSION AND MANAGEMENT (2018)

Add to Collection
Review Thermodynamics

Co-pyrolysis of biomass and waste plastics as a thermochemical conversion technology for high-grade biofuel production: Recent progress and future directions elsewhere worldwide

Benjamin Bernard Uzoejinwa et al.

ENERGY CONVERSION AND MANAGEMENT (2018)

Add to Collection
Article Chemistry, Applied

Co-pyrolysis of oily sludge and rice husk for improving pyrolysis oil quality

Bingcheng Lin et al.

FUEL PROCESSING TECHNOLOGY (2018)

Add to Collection
Article Chemistry, Analytical

Co-pyrolysis of woody biomass and plastic waste in both analytical and pilot scale

Ann-Christine Johansson et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2018)

Add to Collection
Article Green & Sustainable Science & Technology

Investigation on bio-oil yield and quality with scrap tire addition in sugarcane bagasse pyrolysis

Naveed Ahmed et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Add to Collection
Article Agricultural Engineering

Synergetic effects during co-pyrolysis of biomass and waste tire: A study on product distribution and reaction kinetics

Linzheng Wang et al.

BIORESOURCE TECHNOLOGY (2018)

Add to Collection
Article Energy & Fuels

Kinetic and Thermodynamic Analyses of Sugar Cane Bagasse and Sewage Sludge Co-pyrolysis Process

Zeeshan Hameed et al.

ENERGY & FUELS (2018)

Add to Collection
Review Chemistry, Physical

Insights into pyrolysis and catalytic co-pyrolysis upgrading of biomass and waste rubber seed oil to promote the formation of aromatics hydrocarbon

Yunwu Zheng et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)

Add to Collection
Article Chemistry, Analytical

Co-deoxy-liquefaction of willow leaves and waste tires for high-caloric fuel production

Weipeng Lu et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2018)

Add to Collection
Article Green & Sustainable Science & Technology

A comparative study on co-pyrolysis of lignocellulosic biomass with polyethylene terephthalate, polystyrene, and polyvinyl chloride: Synergistic effects and product characteristics

Gamzenur Ozsin et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Add to Collection
Article Chemistry, Physical

Co-pyrolysis of textile dyeing sludge and four typical lignocellulosic biomasses: Thermal conversion characteristics, synergetic effects and reaction kinetics

Jinjiao Zhu et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)

Add to Collection
Article Energy & Fuels

Pyrolysis characteristics of waste tire particles in fixed-bed reactor with internals

Shipei Xu et al.

CARBON RESOURCES CONVERSION (2018)

Add to Collection
Proceedings Paper Chemistry, Applied

Effect of Plastic Blends on Slow Pyrolysis of Oil Palm Empty Fruit Bunch

Sabar Pangihutan Simanungkalit et al.

PROCEEDINGS OF THE 4TH INTERNATIONAL SYMPOSIUM ON APPLIED CHEMISTRY 2018 (2018)

Add to Collection
Article Energy & Fuels

Renewable Energy from Waste: Investigation of Co-pyrolysis between Sargassum Macroalgae and Polystyrene

Ketwalee Kositkanawuth et al.

ENERGY & FUELS (2017)

Add to Collection
Article Thermodynamics

Insights into pyrolysis and co-pyrolysis of biomass and polystyrene: Thermochemical behaviors, kinetics and evolved gas analysis

Gamzenur Ozsin et al.

ENERGY CONVERSION AND MANAGEMENT (2017)

Add to Collection
Article Chemistry, Analytical

Impact of plastic blends on the product yield from co-pyrolysis of lignin-rich materials

Marcin Sajdak

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2017)

Add to Collection
Article Chemistry, Analytical

Co-pyrolysis of sewage sludge and sawdust/rice straw for the production of biochar

Hua-jun Huang et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2017)

Add to Collection
Article Engineering, Environmental

Fast co-pyrolysis of waste newspaper with high-density polyethylene for high yields of alcohols and hydrocarbons

Weimin Chen et al.

WASTE MANAGEMENT (2017)

Add to Collection
Article Materials Science, Paper & Wood

Fabrication of Activated Carbon Using Two-Step Co-Pyrolysis of Used Rubber and Larch Sawdust

Jing Geng et al.

BIORESOURCES (2017)

Add to Collection
Article Engineering, Environmental

LCA study of unconsumed food and the influence of consumer behavior

Lisa Marie Gruber et al.

INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT (2016)

Add to Collection
Article Engineering, Environmental

Kinetic Study of Copyrolysis of Waste Polyethylene Terephthalate, Polylactic Acid, and Rice Straw

Hua-Shan Tai et al.

ENVIRONMENTAL ENGINEERING SCIENCE (2016)

Add to Collection
Article Energy & Fuels

Co-pyrolysis of sugarcane bagasse and low-density polyethylene: Influence of plastic on pyrolysis product yield

Ashish Dewangan et al.

FUEL (2016)

Add to Collection
Article Chemistry, Applied

Characterization of the bio-oil obtained by fast pyrolysis of sewage sludge in a conical spouted bed reactor

J. Alvarez et al.

FUEL PROCESSING TECHNOLOGY (2016)

Add to Collection
Review Green & Sustainable Science & Technology

A comprehensive review on the applications of waste tire rubber in cement concrete

Blessen Skariah Thomas et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

Add to Collection
Article Engineering, Environmental

Thermogravimetric and calorimetric characteristics during co-pyrolysis of municipal solid waste components

Emmanuel Ansah et al.

WASTE MANAGEMENT (2016)

Add to Collection
Article Thermodynamics

Optimization of fuel recovery through the stepwise co-pyrolysis of palm shell and scrap tire

Faisal Abnisa et al.

ENERGY CONVERSION AND MANAGEMENT (2015)

Add to Collection
Article Thermodynamics

Thermogravimetric analysis of the co-pyrolysis of paper sludge and municipal solid waste

Shiwen Fang et al.

ENERGY CONVERSION AND MANAGEMENT (2015)

Add to Collection
Article Energy & Fuels

Co-pyrolysis of Karanja and Niger seeds with waste polystyrene to produce liquid fuel

Krushna Prasad Shadangi et al.

FUEL (2015)

Add to Collection
Article Energy & Fuels

Fast co-pyrolysis of sewage sludge and lignocellulosic biomass in a conical spouted bed reactor

Jon Alvarez et al.

FUEL (2015)

Add to Collection
Article Engineering, Environmental

The LCA of portland cement production in China

Chen Li et al.

INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT (2015)

Add to Collection
Article Agricultural Engineering

Specific molecular structure changes and radical evolution during biomass-polyethylene terephthalate co-pyrolysis detected by 13C and 1H solid-state NMR

Kwang-Hyun Ko et al.

BIORESOURCE TECHNOLOGY (2014)

Add to Collection
Article Agricultural Engineering

Investigation on thermochemical behavior of co-pyrolysis between oil-palm solid wastes and paper sludge

Yousheng Lin et al.

BIORESOURCE TECHNOLOGY (2014)

Add to Collection
Article Energy & Fuels

Comparison of the Lipid Content and Biodiesel Production from Municipal Sludge Using Three Extraction Methods

Fenfen Zhu et al.

ENERGY & FUELS (2014)

Add to Collection
Article Thermodynamics

Analysis of thermal degradation kinetics and carbon structure changes of co-pyrolysis between macadamia nut shell and PET using thermogravimetric analysis and 13C solid state nuclear magnetic resonance

Kwang-Hyun Ko et al.

ENERGY CONVERSION AND MANAGEMENT (2014)

Add to Collection
Review Thermodynamics

A review on co-pyrolysis of biomass: An optional technique to obtain a high-grade pyrolysis oil

Faisal Abnisa et al.

ENERGY CONVERSION AND MANAGEMENT (2014)

Add to Collection
Article Thermodynamics

Bio-oil production via co-pyrolysis of almond shell as biomass and high density polyethylene

Eylem Onal et al.

ENERGY CONVERSION AND MANAGEMENT (2014)

Add to Collection
Article Green & Sustainable Science & Technology

Pyrolysis of Mixtures of Palm Shell and Polystyrene: An Optional Method to Produce a High-Grade of Pyrolysis Oil

Faisal Abnisa et al.

ENVIRONMENTAL PROGRESS & SUSTAINABLE ENERGY (2014)

Add to Collection
Article Chemistry, Applied

Co-pyrolysis of biomass with waste tyres: Upgrading of liquid bio-fuel

Juan D. Martinez et al.

FUEL PROCESSING TECHNOLOGY (2014)

Add to Collection
Article Chemistry, Applied

An experimental study on bio-oil production from co-pyrolysis with potato skin and high-density polyethylene (HDPE)

Eylem Onal et al.

FUEL PROCESSING TECHNOLOGY (2012)

Add to Collection
Article Chemistry, Analytical

Study on pyrolysis characteristics of refuse plastic fuel using lab-scale tube furnace and thermogravimetric analysis reactor

Sang Shin Park et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2012)

Add to Collection
Article Chemistry, Analytical

Synergistic effects on co-pyrolysis of lignite and high-sulfur swelling coal

Jinxia Fei et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2012)

Add to Collection
Article Engineering, Environmental

Physico-chemical properties of chars obtained in the co-pyrolysis of waste mixtures

M. Bernardo et al.

JOURNAL OF HAZARDOUS MATERIALS (2012)

Add to Collection
Article Polymer Science

Co-pyrolysis of LignoBoost® lignin with synthetic polymers

Mihai Brebu et al.

POLYMER DEGRADATION AND STABILITY (2012)

Add to Collection
Article Chemistry, Multidisciplinary

Copyrolysis of block polypropylene with waste wood chip

Mi-Jin Jeon et al.

KOREAN JOURNAL OF CHEMICAL ENGINEERING (2011)

Add to Collection
Article Energy & Fuels

Co-pyrolysis of pine cone with synthetic polymers

Mihai Brebu et al.

FUEL (2010)

Add to Collection
Article Energy & Fuels

Pyrolysis Mechanisms of Biomass Materials

A. Demirbas

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2009)

Add to Collection
Article Chemistry, Applied

Investigations into the characteristics of oils produced from co-pyrolysis of biomass and tire

Qing Cao et al.

FUEL PROCESSING TECHNOLOGY (2009)

Add to Collection
Article Agricultural Engineering

Jute stick pyrolysis for bio-oil production in fluidized bed reactor

M. Asadullah et al.

BIORESOURCE TECHNOLOGY (2008)

Add to Collection
Article Energy & Fuels

Flash co-pyrolysis of biomass with polylactic acid. Part 1: Influence on bio-oil yield and heating value

T. Cornelissen et al.

FUEL (2008)

Add to Collection
Article Energy & Fuels

The effect of lignin and inorganic species in biomass on pyrolysis oil yields, quality and stability

R. Fahmi et al.

FUEL (2008)

Add to Collection
Article Energy & Fuels

Overview of applications of biomass fast pyrolysis oil

S Czernik et al.

ENERGY & FUELS (2004)

Add to Collection
Article Chemistry, Physical

ReaxFF: A reactive force field for hydrocarbons

ACT van Duin et al.

JOURNAL OF PHYSICAL CHEMISTRY A (2001)

Add to Collection
Webinars Posters Questions Hubs Funding Journals Papers Connect Collections Reviewers About Us FAQs Mobile App Privacy Policy Terms of Use
© Peeref 2019-2024. All rights reserved.