☆ 4.7 Article

Review on Migration and Transformation of Lattice Oxygen during Chemical Looping Conversion: Advances and Perspectives

ENERGY & FUELS (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Applied

Development and performance of CeO2 supported BaCoO3-δ perovskite for chemical looping steam methane reforming

Haoran Ding et al.

Summary: This study prepared CeO2-supported BaCoO3-δ oxygen carriers with different component distributions and evaluated their performance in CL-SMR. Among them, the sol-gel sample showed the best performance with a close-to-ideal H2/CO ratio of 2 and high syngas and hydrogen production.

FUEL PROCESSING TECHNOLOGY (2023)

Add to Collection

Article Chemistry, Physical

Construction of CuO/CeO2 Catalysts via the Ceria Shape Effect for Selective Catalytic Oxidation of Ammonia

Hongchun Sun et al.

Summary: Tuning the interaction between the metal oxide and support material is crucial for the catalytic purification of NH3. CuO/CeO2 catalysts with different shapes were prepared and analyzed for the selective catalytic oxidation of NH3. The Cu/Ce-NR catalyst exhibited better catalytic activity due to the presence of more interfacial sites and oxygen vacancies, as compared to Cu/Ce-NC catalysts. The study provides insights into the design and optimization of catalysts for NH3 purification.

ACS CATALYSIS (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Chemical looping: A flexible platform technology for CH4 conversion coupled with CO2 utilization

Zhihao Zhou et al.

Summary: Significant developments in chemical looping technology have been made, allowing for efficient CO2 capture, fuel conversion, and CO2 utilization. Recently, the focus has shifted to the coupling of chemical looping CH4 conversion with CO2 utilization, as it offers a solution for co-converting the two most abundant anthropogenic greenhouse gases. This review provides an overview of the latest advances in chemical looping CH4 conversion coupled with CO2 utilization, including chemical looping reforming, chemical looping CO2 splitting, and calcium looping, while also addressing the challenges and future research directions.

CURRENT OPINION IN GREEN AND SUSTAINABLE CHEMISTRY (2023)

Add to Collection

Review Thermodynamics

Chemical looping-based energy transformation via lattice oxygen modulated selective oxidation

Zhao Sun et al.

Summary: This paper provides an overview of the state-of-the-art schemes for selective synthesis of valuable chemicals via lattice oxygen-induced redox looping. It discusses various applications such as methane oxidation, oxidative coupling of methane, oxidative steam reforming of alcohols, and oxidative dehydrogenation of hydrocarbons. The study also proposes potential approaches and provides an overview of advanced oxygen carrier material design, preparation, and characterization.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2023)

Add to Collection

Article Chemistry, Physical

Modulating lattice oxygen activity of Ca2Fe2O5 brownmillerite for the co-production of syngas and high purity hydrogen via chemical looping steam reforming of toluene

Tingting Xu et al.

Summary: Doping of heteroatoms in brownmillerite-structured Ca2Fe2O5 can induce structural changes and enhance lattice oxygen activity and oxygen transfer capacity, leading to improved chemical looping steam reforming of biomass tar for higher syngas productivity and hydrogen purity.

APPLIED CATALYSIS B-ENVIRONMENTAL (2023)

Add to Collection

Article Engineering, Environmental

Exploring the migration and transformation of lattice oxygen during chemical looping with NiFe2O4 oxygen carrier

Zhen Huang et al.

Summary: This study investigates the release-uptake paths of lattice oxygen and chemical reaction laws at the interface of an oxygen carrier using composite metal oxide. The results show that the chemical reaction interface is located on the surface of the oxygen carrier particles, with concentration gradient driving the transmission of lattice oxygen for reduction or oxidation of the oxygen carrier. Additionally, the formation process of hydroxyl ions in the oxygen carrier was confirmed by in-situ XPS analysis.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Energy & Fuels

Long-term coal chemical looping gasification using a bimetallic oxygen carrier of natural hematite and copper ore

Siqi Liu et al.

Summary: Coal chemical looping gasification (CCLG) is a promising technology with high resource utilization rate and environmental protection properties, requiring suitable oxygen carriers and optimized operating conditions for coal conversion and H2&CO production. This study tested a Cu-Fe bi-ore oxygen carrier and found that the optimal gasification conditions were at 950 degrees C with a oxygen carrier-to-coal mass ratio of 3:1 and steam rate of 0.08 ml/min, achieving a syngas yield of 58 mmol/g, 75.2% syngas selectivity, and 85.3% carbon conversion.

FUEL (2022)

Add to Collection

Article Chemistry, Physical

Insight for Designing Mass-Efficient Metal-Oxide-Supported Heterogeneous Catalyst from the Identification of the Catalytically Active Edge Sites Using Isotopically Labeled 13CO and 18O2

Atsushi Beniya et al.

Summary: Identifying catalytically active sites and reaction pathways is crucial for efficient heterogeneous catalysts. However, thermodynamics-based kinetic analyses can lead to contradictory conclusions. Through experiments, it is shown that lattice oxygen is not the main source of oxygen for CO oxidation on TiO2, with most of the CO2 produced by oxygen atoms from Pt atoms adsorbed on TiO2.

ACS CATALYSIS (2022)

Add to Collection

Article Chemistry, Physical

Ce-modified SrFeO3-δ for ethane oxidative dehydrogenation coupled with CO2 splitting via a chemical looping scheme

Xin Tian et al.

Summary: Ce-modified SrFeO3 oxygen carriers exhibit high activity and selectivity in oxidative dehydrogenation of ethane, attributed to the decreased Fe2+/(Fe3++Fe4+) ratio and increased active oxygen species on the near-surface. DFT calculations demonstrate that Ce promotion leads to a lower energy barrier for surface oxygen vacancy formation in 0.2Ce/SrFeO3. The superior ethylene selectivity achieved by CO2-regenerated samples is mainly due to the higher resistance of lattice oxygen diffusion from bulk to surface.

APPLIED CATALYSIS B-ENVIRONMENTAL (2022)

Add to Collection

Article Energy & Fuels

Insight into the synergy effect on the improved reactivity of spinel NiMn2O4 oxygen carrier in chemical looping combustion

Feng Liu et al.

Summary: This study systematically investigates the reactivity of spinel NiMn2O4 through experimental tests and theoretical calculations. Experimental results reveal that the reduction process of NiMn2O4 consists of two stages, and Ni atoms synergistically enhance the reduction of Mn2O3. The reaction mechanism between NiMn2O4 and CO is elucidated by density functional theory calculations, showing that Ni atoms can improve the reactivity of Mn-based oxygen carrier.

FUEL (2022)

Add to Collection

Article Energy & Fuels

Chemical looping gasification of digestate: Investigation on the surface and lattice oxygen of perovskite oxygen carrier

Zhiyu Li et al.

Summary: This study investigates the crucial properties of oxygen carriers (OC) in chemical looping gasification and finds that LaCu0.5Fe0.5O3 exhibits the best gasification performance. The stability of OC is also evaluated through cyclic experiments.

FUEL (2022)

Add to Collection

Article Chemistry, Physical

Evolution behavior and active oxygen quantification of reaction mechanism on cube Cu2O for CO self-sustained catalytic combustion and chemical-looping combustion

Running Kang et al.

Summary: This study compares the evolution behavior and reaction mechanisms of copper catalysts in catalytic combustion and chemical looping combustion. The results show that catalytic combustion has higher activity and stability compared to chemical looping combustion. Different active oxygen species and reaction pathways were proposed, and the contribution degrees of Mars-van-Krevelen and Langmuir-Hinshelwood mechanisms were determined.

APPLIED CATALYSIS B-ENVIRONMENTAL (2022)

Add to Collection

Article Chemistry, Physical

Unveiling the Key Factors in Determining the Activity and Selectivity of CO2 Hydrogenation over Ni/CeO2 Catalysts

Hao Zheng et al.

Summary: This study investigates the key factors governing the activity and product selectivity of CO2 hydrogenation using CeO2-supported Ni catalysts. The results reveal that interfacial oxygen vacancies are responsible for the catalytic activity, while the structure of supported Ni species determines the product selectivity. By adjusting these factors, the catalytic performance and product selectivity of CO2 hydrogenation can be improved.

ACS CATALYSIS (2022)

Add to Collection

Article Chemistry, Physical

Operando Identification of Dynamic Photoexcited Oxygen Vacancies as True Catalytic Active Sites

Ye He et al.

ACS Catalysis (2022)

Add to Collection

Article Energy & Fuels

Conversion of carbon dioxide to carbon monoxide: Two-step chemical looping dry reforming using Ca2Fe2O5-Zr0.5Ce0.5O2 composite oxygen carriers

Luwen Wang et al.

Summary: In this study, Zr0.5Ce0.5O2 was used to enhance the reactivity of Ca2Fe2O5 oxygen carriers and alleviate sintering issues. The addition of Zr0.5Ce0.5O2 led to improved carbon monoxide yield and cyclic performance of the modified oxygen carriers.

FUEL (2022)

Add to Collection

Article Chemistry, Applied

Sandwich Ni-phyllosilicate@doped-ceria for moderate-temperature chemical looping dry reforming of methane

Jiakai Wang et al.

Summary: Chemical looping dry reforming of methane (CL-DRM) is a method that selectively oxidizes methane and reduces carbon dioxide. By designing catalysts with specific structures, synthesis gas can be generated at lower temperatures. These catalysts have high coke resistance and redox reactivity.

FUEL PROCESSING TECHNOLOGY (2022)

Add to Collection

Article Energy & Fuels

Chemical looping reforming of toluene via Fe2O3@SBA-15 based on controlling reaction microenvironments

Xiangyang Mao et al.

Summary: This study successfully regulated the micro-reaction environment of oxygen carriers through the embeddedness strategy, improving the recycling and partial oxidation performance. The results showed that Fe2O3@SBA-15 has higher CO selectivity and catalytic performance, along with good cycle stability.

FUEL (2022)

Add to Collection

Article Energy & Fuels

Chemical looping combustion of lignite using iron ore modified by foreign ions: Alkaline-earth and transition metal ions

Yan Lin et al.

Summary: This paper investigates the effects of particle size and temperature on the chemical looping combustion of lignite using iron ore as the oxygen carrier. The modification of the oxygen carrier with Cu, K, Na, Ca and Mn effectively enhances the capacity for lignite transformation.

FUEL (2022)

Add to Collection

Article Chemistry, Applied

Enhanced performance of LaFeO3 oxygen carriers by NiO for chemical looping partial oxidation of methane

Xingyun Li et al.

Summary: This study proposes a modified NiO/LaFeO3 oxygen carrier to enhance the activity of lattice oxygen in methane partial oxidation. The results demonstrate that the loading of Ni has a significant impact on methane conversion rate and product selectivity, and 5 wt% Ni/ LaFeO3 oxygen carrier exhibits higher methane conversion rate and CO selectivity.

FUEL PROCESSING TECHNOLOGY (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Reaction characteristics and lattice oxygen transformation mechanism of semi-coke chemical looping gasification with Fe2O3/CaSO4-Al2O3 oxygen carrier

Yu Guan et al.

Summary: Chemical looping gasification (CLG) is a potential and clean way to utilize solid fuels with CO2 separation. This study synthesized Fe2O3-Al2O3, CaSO4-Al2O3, and Fe2O3/CaSO4-Al2O3 oxygen carriers (OCs) and applied them in semi-coke chemical looping gasification (SCCLG) for syngas production. The results showed that Fe2O3/CaSO4-Al2O3 had a higher syngas yield compared to the other OCs tested at a certain reaction condition. Additionally, the reaction mechanism of SCCLG was proposed based on experimental methods and calculations.

JOURNAL OF CLEANER PRODUCTION (2022)

Add to Collection

Article Multidisciplinary Sciences

Flame-made ternary Pd-In2O3-ZrO2 catalyst with enhanced oxygen vacancy generation for CO2 hydrogenation to methanol

Thaylan Pinheiro Araujo et al.

Summary: This study presents the synthesis of ternary Pd-In2O3-ZrO2 catalysts with remarkable methanol productivity and improved metal utilization using flame spray pyrolysis (FSP). Unlike traditional methods, the materials prepared by FSP combine low-nuclearity palladium species with highly dispersed In2O3 monolayers on the ZrO2 carrier. A pioneering protocol using in situ electron paramagnetic resonance spectroscopy reveals enhanced generation of oxygen vacancies in this unique catalyst architecture, explaining its high and sustained methanol productivity.

NATURE COMMUNICATIONS (2022)

Add to Collection

Article Chemistry, Physical

Photo-Switchable Oxygen Vacancy as the Dynamic Active Site in the Photocatalytic NO Oxidation Reaction

Qin Ren et al.

Summary: This study demonstrates the use of in situ electron paramagnetic resonance (EPR) technology to investigate the dynamic evolution of active sites in a BiOCl catalyst during gas-solid photocatalytic reactions. The formation and recovery of photoexcited oxygen vacancies (PE-OVs) are experimentally verified, and these vacancies are identified as photoswitchable OVs that can activate O2 molecules. In situ FT-IR spectra reveal that the dynamic PE-OVs facilitate the conversion of reaction intermediates into the final product. This work challenges the conventional view of static OVs as active sites and introduces the concept of dynamic defects as real active sites for catalysis reactions.

ACS CATALYSIS (2022)

Add to Collection

Article Chemistry, Physical

In Situ Removal of Benzene as a Biomass Tar Model Compound Employing Hematite Oxygen Carrier

Zhen Huang et al.

Summary: Tar removal is a crucial issue in biomass gasification, and chemical looping gasification technology shows advantages in low tar generation. Hematite OC exhibits good catalytic and oxidative performance in benzene cracking. Prolonged residence time enhances benzene removal, while the addition of water vapor inhibits benzene conversion.

CATALYSTS (2022)

Add to Collection

Article Chemistry, Physical

Migration Mechanism of Lattice Oxygen: Conversion of CO2 to CO Using NiFe2O4 Spinel Oxygen Carrier in Chemical Looping Reactions

Da Song et al.

Summary: This study investigated the migration mechanism of lattice oxygen in the process of chemical looping dry reforming using NiFe2O4 as the oxygen carrier. The results clarified the release and diffusion paths of lattice oxygen during CO2 resourceful utilization. The findings provide reference and basis for the further development and design of chemical looping dry reforming technology using spinel oxygen carriers.

CATALYSTS (2022)

Add to Collection

Review Chemistry, Physical

Emerging Applications of Synchrotron Radiation X-Ray Techniques in Single Atomic Catalysts

Zhongxin Song et al.

Summary: Single atom catalysts (SACs) offer increased atom utilization efficiency and active sites compared to traditional catalysts. Synchrotron radiation techniques, such as X-ray absorption near edge spectroscopy and extended X-ray absorption fine structure spectroscopy, are important for characterizing SACs and providing detailed information about their local environment, oxidation state, electronic structures, and in situ structure modifications during catalytic reactions.

SMALL METHODS (2022)

Add to Collection

Review Energy & Fuels

Research Progress and Perspectives of Solid Fuels Chemical Looping Reaction with Fe-Based Oxygen Carriers

Yinhe Liu et al.

Summary: Chemical looping (CL) is a promising technology with CO2 capture capabilities in industrial applications. Iron based (Fe-based) materials are the most likely candidates for oxygen carriers due to their economic and eco-friendly characteristics. This review provides a comprehensive overview of Fe-based oxygen carriers, including their preparation methods, characteristics, and reaction mechanisms. The application of Fe-based oxygen carriers in chemical looping processes and the recent progress in reaction mechanism studies are also discussed. The challenges and prospects of Fe-based oxygen carriers are presented along with effective strategies. This review aims to provide insights into the practical application of Fe-based oxygen carriers in chemical looping.

ENERGY & FUELS (2022)

Add to Collection

Article Energy & Fuels

Tungstate promoted CaMnO3-based core-shell redox catalysts for efficient chemical looping oxidative coupling of methane

Kun Zhao et al.

Summary: Chemical looping oxidative coupling of methane (CLOCM) is a promising method for converting methane to olefins. In this study, CaMnO3 was used as an oxygen carrier and tungstate was added to improve C2 product selectivity. The results showed that Na2WO4-doped CaMnO3 exhibited the highest activity with a C2 yield of 15.5% at 800 degrees C. The presence of Na2WO4 effectively controlled methane conversion and C-C coupling by regulating oxygen release and transformation.

JOURNAL OF THE ENERGY INSTITUTE (2022)

Add to Collection

Article Energy & Fuels

Chemical looping combustion of lignite using iron ore modified by foreign ions: Alkaline-earth and transition metal ions

Yan Lin et al.

Summary: The study investigates the effects of particle size and temperature on the chemical looping combustion (CLC) of lignite, using iron ore as the oxygen carrier with added alkaline-earth metals and transition metals. The modification of the oxygen carrier with Cu, K, Na, Ca, and Mn enhances its capacity to transform lignite and improve CO2 selectivity, with potential applications in the design of oxygen carriers for the CLC process.

FUEL (2022)

Add to Collection

Article Energy & Fuels

Investigation of CuO-Fe2O3 Oxygen Carriers with Different Supports in Chemical Looping Combustion

Shouxi Jiang et al.

Summary: The study investigated Cu-Fe bimetallic oxygen carriers (OCs) supported by SiO2, Al2O3, or hematite in a fluidized-bed reactor. It was found that CuFe-He and CuFe-Al OCs performed better than CuFe-Si OC, with the latter leading to deactivation due to irreversible interaction. Hematite was identified as an excellent support candidate for manufacturing Cu-Fe OCs. Additionally, maintaining a high O/C ratio and increasing reaction temperature above 850 degrees C promoted coal conversion efficiency in chemical looping combustion.

ENERGY & FUELS (2021)

Add to Collection

Article Energy & Fuels

Redox Performance of Cu-Doped Fe2O3/Al2O3 as Oxygen Carriers for Chemical Looping Hydrogen Production

Shuoxin Zhang et al.

Summary: The study found that copper doping enhanced the activities of iron-based oxygen carriers, but excessive copper would reduce their reactivity due to melting and agglomeration. Hydrogen temperature-programmed reduction (H-2-TPR) analysis, fixed-bed experiments, and density functional theory (DFT) calculations confirmed that Cu promoted the deep reduction of Fe2O3. The oxygen carrier doped with 1 wt % CuO was the most suitable material for CLH, with the highest hydrogen yield sustained at a high and stable level in multiple redox cycles.

ENERGY & FUELS (2021)

Add to Collection

Article Energy & Fuels

Spatial evolution characteristics of active components of copper-iron based oxygen carrier in chemical looping combustion

Fang Liu et al.

Summary: The reactivity of oxygen carriers in chemical looping technology is crucial, and understanding the spatial evolution of active components and lattice oxygen migration during reduction reaction is essential. Experimental and theoretical studies in this research have shown that as the reduction reaction progresses, lattice oxygen is gradually depleted, leading to an increase in Cu-0 and Fe2+ content.

FUEL (2021)

Add to Collection

Review Chemistry, Applied

Removal of pollution from the chemical looping process: A mini review

Hongming Jiang et al.

Summary: The chemical looping process (CLP) technology has shown promise in reducing emissions and removing pollutants by achieving zero-CO2 emissions and utilizing cascade energy. Fe-based oxygen carriers are considered the most promising materials for practical application in pollutant removal, showing significant potential in environmental protection.

FUEL PROCESSING TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Physical

Spatially controlled oxygen storage materials improved the syngas selectivity on chemical looping methane conversion

Dewang Zeng et al.

Summary: This study successfully enhanced the selectivity of syngas by controlling the structure of oxygen storage materials, providing a new strategy for regulating oxygen diffusion in chemical looping. The findings can also be extended to other chemical looping applications.

APPLIED CATALYSIS B-ENVIRONMENTAL (2021)

Add to Collection

Article Chemistry, Physical

Experimental and theoretical insights into the reaction mechanism of spinel CuMn2O4 with CO in chemical-looping combustion

Ruixue Fang et al.

Summary: Chemical-looping combustion is considered a promising technology for low-cost CO2 separation. CuMn2O4, combining Cu and Mn into a spinel matrix, exhibits superior reactivity compared to Mn2O3 in the oxidation of CO. Experimental and theoretical studies support the improved performance of CuMn2O4, showing that the presence of Cu enhances its reactivity in CO oxidation reactions.

APPLIED SURFACE SCIENCE (2021)

Add to Collection

Article Energy & Fuels

LaNi1-xCoxO3 perovskites for methane combustion by chemical looping

Milena de Santana Santos et al.

Summary: Perovskite oxides LaNi1-xCoxO3 (x = 0.0; 0.2; 0.5; 1.0) were studied in chemical looping combustion of methane. Nickel substitution for cobalt decreased active oxygen, while cobalt insertion improved re-oxidation rates and reduced coke deposits. The best CLC sample in the series was found to be LaNi0.5Co0.5O3 due to its faster complete reduction and resistance to coke formation.

FUEL (2021)

Add to Collection

Article Energy & Fuels

Bifunctional Catalyst NiFe-MgAl for Hydrogen Production from Chemical Looping Ethanol Reforming

Janenipa Saupsor et al.

Summary: The performances of NiFe-MgAl bifunctional catalysts in the chemical looping reforming of ethanol were studied, showing higher catalytic activity and stability compared to monometallic catalysts. The NiFe-MgAl catalyst provided the highest H-2 concentration at a low reaction temperature and maintained high hydrogen selectivity for repeated cycles.

ENERGY & FUELS (2021)

Add to Collection

Article Thermodynamics

Coupling chemical looping combustion of solid fuels with advanced steam cycles for CO2 capture: A process modelling study

Syed Saqline et al.

Summary: Chemical looping combustion is a cost-competitive solution for producing low carbon electricity. By conducting process modeling studies, this research investigated the coupling of chemical looping combustion with advanced steam-based power cycles, finding in situ gasification chemical looping combustion to have the highest efficiency. Energy efficiency penalties for capturing CO2 are relatively low compared to power plants without carbon capture.

ENERGY CONVERSION AND MANAGEMENT (2021)

Add to Collection

Article Energy & Fuels

Experimental and theoretical insights into the mechanism of spinel CoFe2O4 reduction in CO chemical looping combustion

Feng Liu et al.

Summary: The reduction of CoFe2O4 is a one-step reaction process, and the presence of Co improves its reactivity. Two types of reaction kinetics are involved in the isothermal reduction of CoFe2O4.

FUEL (2021)

Add to Collection

Review Chemistry, Physical

A Brief Review on Solid Electrolyte Interphase Composition Characterization Technology for Lithium Metal Batteries: Challenges and Perspectives

Xinyi Shan et al.

Summary: Lithium metal batteries (LMB) are considered as the most promising high-energy-density energy storage devices, but their commercial applications are hindered by poor cycling stability and safety concerns. Solid electrolyte interphase (SEI) plays a dominant role in regulating Li deposition and overall performance of LMBs, but its composition and evolution are still elusive. Advanced characterization methods and monitoring techniques are urgently needed to address these issues. This perspective introduces the development history of SEI research, formation mechanisms, advanced technologies for SEI characterization and monitoring, and proposes future investigation directions.

JOURNAL OF PHYSICAL CHEMISTRY C (2021)

Add to Collection

Article Engineering, Chemical

Modulation of Fe-based oxygen carriers by low concentration doping of Cu in chemical looping process: Reactivity and mechanism based on experiments combined with DFT calculations

Nini Yuan et al.

Summary: This study investigated the reactivity modulation of Fe-based oxygen carriers doped with low concentration of Cu in the chemical looping process. Experimental results showed a decrease in activation energies for Cu2xFe2(1-x)O3 compared to pure Fe-based OCs, indicating enhanced reactivity. DFT calculations revealed lower reaction energy barriers for Cu2xFe2(1-x)O3 with different doping concentrations and configurations, highlighting the importance of Cu doping and reaction pathway modulation in improving reactivity.

POWDER TECHNOLOGY (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Status and prospect of in situ and operando characterization of solid-state batteries

Marm B. Dixit et al.

Summary: This paper highlights the importance of solid-state batteries in achieving electrification of the transportation sector, while also discussing challenges such as electro-chemo-mechanical degradation affecting performance metrics. Characterizing and understanding the solid|solid interfaces in solid-state batteries is crucial for designing high energy density, durable solid-state batteries.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Controlling lattice oxygen activity of oxygen carrier materials by design: a review and perspective

Wen Liu

Summary: Chemical looping is an emerging process intensification technology that can reduce emissions. Progress has been made in understanding oxygen carriers and their behavior, but there are still knowledge gaps. Lattice oxygen activity is a critical factor affecting product yield and selectivity in chemical looping processes.

REACTION CHEMISTRY & ENGINEERING (2021)

Add to Collection

Article Chemistry, Multidisciplinary

In situ STEM study on the morphological evolution of copper-based nanoparticles during high-temperature redox reactions

Sharmin Sharna et al.

Summary: This paper investigates the transformation of copper nanoparticles induced by oxidative and reductive environments at high temperatures using in situ Scanning Transmission Electron Microscopy. The study shows that the morphological evolution of copper nanoparticles during oxidation depends on their initial size and reaction temperature, with hollow shells collapsing to form compact and faceted nanoparticles upon further temperature increase. The research offers insights into the mobility of copper phase during its oxidation-reduction process in terms of microstructural evolution as a function of nanoparticle size, reaction gas, and temperature.

NANOSCALE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Real-Time Atomic-Scale Visualization of Reversible Copper Surface Activation during the CO Oxidation Reaction

Langli Luo et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Article Thermodynamics

Kinetics of redox reactions of CuO@TiO2-Al2O3 for chemical looping combustion and chemical looping with oxygen uncoupling

Xin Tian et al.

COMBUSTION AND FLAME (2020)

Add to Collection

Article Thermodynamics

In-situ removal of toluene as a biomass tar model compound using NiFe2O4 for application in chemical looping gasification oxygen carrier

Zhen Huang et al.

ENERGY (2020)

Add to Collection

Article Energy & Fuels

Interaction of Methane with Calcium Ferrite in the Chemical Looping Partial Oxidation Application: Experimental and DFT Study

Duane D. Miller et al.

ENERGY & FUELS (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Advanced characterization techniques for solid state lithium battery research

Yuxuan Xiang et al.

MATERIALS TODAY (2020)

Add to Collection

Review Energy & Fuels

Chemical-Looping Conversion of Methane: A Review

Danyang Li et al.

ENERGY TECHNOLOGY (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Developing Oxygen Carriers for Chemical Looping Biomass Processing: Challenges and Opportunities

Lei Yu et al.

ADVANCED SUSTAINABLE SYSTEMS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Coverage-Dependent Behaviors of Vanadium Oxides for Chemical Looping Oxidative Dehydrogenation

Sai Chen et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Article Engineering, Environmental

Moderate -temperature chemical looping splitting of CO 2 and H 2 O for syngas generation

Zeshui Cao et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Engineering, Environmental

Chemical looping gasification coupled with steam reforming of biomass using NiFe2O4: Kinetic analysis of DAEM-TI, thermodynamic simulation of OC redox, and a loop test

Yan Lin et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Engineering, Chemical

Chemical looping steam reforming of methane over Ce-doped perovskites

Xianhua Zhang et al.

CHEMICAL ENGINEERING SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

Operando spectroscopic and isotopic-label-directed observation of LaN-promoted Ru/ZrH2 catalyst for ammonia synthesis via associative and chemical looping route

Lingling Li et al.

JOURNAL OF CATALYSIS (2020)

Add to Collection

Article Multidisciplinary Sciences

Activation of subnanometric Pt on Cu-modified CeO2 via redox-coupled atomic layer deposition for CO oxidation

Xiao Liu et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Chemistry, Physical

Reaction performance and lattice oxygen migration of MnFe2O4 oxygen carrier in methane-carbon dioxide reaction system

Huan Zhou et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Add to Collection

Article Energy & Fuels

La-doped cobalt supported on mesoporous alumina catalysts for improved methane dry reforming and coke mitigation

Ngoc Thang Tran et al.

JOURNAL OF THE ENERGY INSTITUTE (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Chemical looping beyond combustion - a perspective

Xing Zhu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

Enhanced sintering resistance of Fe2O3/CeO2 oxygen carrier for chemical looping hydrogen generation using core-shell structure

Shiwei Ma et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Add to Collection

Article Chemistry, Physical

Methane Dissociation on α-Fe2O3(0001) and Fe3O4(111) Surfaces: First-Principles Insights into Chemical Looping Combustion

Joseph W. Bennett et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Review of Recent Development of In Situ/Operando Characterization Techniques for Lithium Battery Research

Dongqing Liu et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Engineering, Environmental

Chemical looping dry reforming of methane with hydrogen generation on Fe2O3/Al2O3 oxygen carrier

Min Zhu et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Article Chemistry, Physical

Synergistic effects of binary oxygen carriers during chemical looping hydrogen production

Dewang Zeng et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Exploration of Reaction Mechanisms on Hydrogen Production through Chemical Looping Steam Reforming Using NiFe2O4 Oxygen Carrier

Zhen Huang et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Add to Collection

Article Chemistry, Physical

Light-Driven Chemical Looping for Ammonia Synthesis

Dayne F. Swearer et al.

ACS ENERGY LETTERS (2019)

Add to Collection

Article Chemistry, Physical

Improving Syngas Selectivity of Fe2O3/Al2O3 with Yttrium Modification in Chemical Looping Methane Conversion

Yu Kang et al.

ACS CATALYSIS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Chemical Looping Co-splitting of H2O-CO2 for Efficient Generation of Syngas

Yanpeng Chen et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Modulating Lattice Oxygen in Dual-Functional Mo-V-O Mixed Oxides for Chemical Looping Oxidative Dehydrogenation

Sai Chen et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Add to Collection

Article Environmental Sciences

Chemical looping gasification of phosphogypsum as an oxygen carrier: The Ca and S migration mechanism using the DFT method

Jing Yang et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2019)

Add to Collection

Article Multidisciplinary Sciences

Near 100% CO selectivity in nanoscaled iron-based oxygen carriers for chemical looping methane partial oxidation

Yan Liu et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Structural studies of the perovskite series La1 xSrxCoO3 d during chemical looping with methane

Tianyu Li et al.

CHEMICAL COMMUNICATIONS (2019)

Add to Collection

Article Energy & Fuels

Effects of supports on reduction activity and carbon deposition of iron oxide for methane chemical looping hydrogen generation

Min Zhu et al.

APPLIED ENERGY (2018)

Add to Collection

Article Chemistry, Applied

A thermogravimetric study of CoTiO3 as oxygen carrier for chemical looping combustion

Jong Ha Hwang et al.

CATALYSIS TODAY (2018)

Add to Collection

Article Engineering, Chemical

Kinetics of CuO/SiO2 and CuO/Al2O3 oxygen carriers for chemical looping combustion

M. A. San Pio et al.

CHEMICAL ENGINEERING SCIENCE (2018)

Add to Collection

Article Energy & Fuels

A mechanistic study of CO oxidation over spinel MnFe2O4 surface during chemical-looping combustion

Feng Liu et al.

FUEL (2018)

Add to Collection

Article Chemistry, Physical

SBA-15 supported mesoporous Ni and Co catalysts with high coke resistance for dry reforming of methane

Berna Erdogan et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)

Add to Collection

Review Thermodynamics

Chemical looping combustion of solid fuels

J. Adanez et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2018)

Add to Collection

Review Biotechnology & Applied Microbiology

Chemical looping at the nanoscale - challenges and opportunities

Amit Mishra et al.

CURRENT OPINION IN CHEMICAL ENGINEERING (2018)

Add to Collection

Article Chemistry, Physical

C2 Selectivity Enhancement in Chemical Looping Oxidative Coupling of Methane over a Mg-Mn Composite Oxygen Carrier by Li-Doping-Induced Oxygen Vacancies

Zhuo Cheng et al.

ACS ENERGY LETTERS (2018)

Add to Collection

Review Engineering, Multidisciplinary

New Insight into the Development of Oxygen Carrier Materials for Chemical Looping Systems

Zhuo Cheng et al.

ENGINEERING (2018)

Add to Collection

Article Chemistry, Physical

Structural and electronic optimization of graphene encapsulating binary metal for highly efficient water oxidation

Yunchuan Tu et al.

NANO ENERGY (2018)

Add to Collection

Review Energy & Fuels

Negative CO2 emissions through the use of biofuels in chemical looping technology: A review

T. Mendiara et al.

APPLIED ENERGY (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Metal oxide redox chemistry for chemical looping processes

Liang Zeng et al.

NATURE REVIEWS CHEMISTRY (2018)

Add to Collection

Review Electrochemistry

Atomic and Molecular Layer Deposition for Superior Lithium-Sulfur Batteries: Strategies, Performance, and Mechanisms

Qian Sun et al.

BATTERIES & SUPERCAPS (2018)

Add to Collection

Article Thermodynamics

A novel oxygen carrier for chemical looping reforming: LaNiO3 perovskite supported on montmorillonite

Lin Li et al.

ENERGY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Chemically and physically robust, commercially-viable iron-based composite oxygen carriers sustainable over 3000 redox cycles at high temperatures for chemical looping applications

Cheng Chung et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Add to Collection

Review Green & Sustainable Science & Technology

Use of natural ores as oxygen carriers in chemical looping combustion: A review

Michael Matzen et al.

INTERNATIONAL JOURNAL OF GREENHOUSE GAS CONTROL (2017)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Reaction between CaO and Fe3O4 under CO-CO2 Atmosphere at 800°C-1 100°C

Zijian Su et al.

ISIJ INTERNATIONAL (2017)

Add to Collection

Article Chemistry, Physical

Enhanced Lattice Oxygen Reactivity over Ni-Modified WO3-Based Redox Catalysts for Chemical Looping Partial Oxidation of Methane

Sai Chen et al.

ACS CATALYSIS (2017)

Add to Collection

Article Chemistry, Physical

Rh-promoted mixed oxides for low-temperature methane partial oxidation in the absence of gaseous oxidants

Arya Shafiefarhood et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Chemistry, Physical

Rational design of CdS@ZnO core-shell structure via atomic layer deposition for drastically enhanced photocatalytic H2 evolution with excellent photostability

Dandan Ma et al.

NANO ENERGY (2017)

Add to Collection

Article Multidisciplinary Sciences

Oxidation behavior of cobalt nanoparticles studied by in situ environmental transmission electron microscopy

Dejiong Zhang et al.

SCIENCE BULLETIN (2017)

Add to Collection

Article Chemistry, Physical

Exploration of the mechanism of chemical looping steam methane reforming using double perovskite-type oxides La1.6Sr0.4FeCoO6

Kun Zhao et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2017)

Add to Collection

Article Chemistry, Physical

Investigation of the role of surface lattice oxygen and bulk lattice oxygen migration of cerium-based oxygen carriers: XPS and designed H2-TPR characterization

Dingkai Chen et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2017)

Add to Collection

Article Engineering, Environmental

Phase interactions in Mg-Ni-Al-O oxygen carriers for chemical looping applications

Jijiang Huang et al.

CHEMICAL ENGINEERING JOURNAL (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Morphology evolution and nanostructure of chemical looping transition metal oxide materials upon redox processes

Lang Qin et al.

ACTA MATERIALIA (2017)

Add to Collection

Article Chemistry, Physical

First-Principles Analysis of Cation Diffusion in Mixed Metal Ferrite Spinels

Christopher L. Muhich et al.

CHEMISTRY OF MATERIALS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Mechanistic Insights into Catalytic Ethanol Steam Reforming Using Isotope-Labeled Reactants

Stephen Crowley et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Single layer graphene encapsulating non-precious metals as high-performance electrocatalysts for water oxidation

Xiaoju Cui et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Add to Collection

Article Chemistry, Physical

Mechanistic Insights into Propene Epoxidation with O2-H2O Mixture on Au7/α-Al2O3: A Hydroproxyl Pathway from ab Initio Molecular Dynamics Simulations

Jin-Cheng Liu et al.

ACS CATALYSIS (2016)

Add to Collection

Article Chemistry, Physical

Rh promoted La0.75Sr0.25(Fe0.8Co0.2)1-xGaxO3-δ perovskite catalysts: Characterization and catalytic performance for methane partial oxidation to synthesis gas

R. Palcheva et al.

APPLIED SURFACE SCIENCE (2015)

Add to Collection

Article Engineering, Chemical

A systematic investigation of the performance of copper-, cobalt-, iron-, manganese- and nickel-based oxygen carriers for chemical looping combustion technology through simulation models

Sanjay Mukherjee et al.

CHEMICAL ENGINEERING SCIENCE (2015)

Add to Collection

Article Energy & Fuels

Mechanistic studies of chemical looping desulfurization of Mn-based oxides using in situ X-ray absorption spectroscopy

C. F. J. Koenig et al.

APPLIED ENERGY (2014)

Add to Collection

Article Energy & Fuels

Chemical-looping combustion of solid fuels - Status of development

Anders Lyngfelt

APPLIED ENERGY (2014)

Add to Collection

Article Engineering, Chemical

Simulation and thermodynamic analysis of chemical looping reforming and CO2 enhanced chemical looping reforming

Apichaya Yahom et al.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2014)

Add to Collection

Article Energy & Fuels

Biomass Char Direct Chemical Looping Gasification Using NiO-Modified Iron Ore as an Oxygen Carrier

Zhen Huang et al.

ENERGY & FUELS (2014)

Add to Collection

Article Energy & Fuels

Copper-Decorated Hematite as an Oxygen Carrier for in Situ Gasification Chemical Looping Combustion of Coal

Weijing Yang et al.

ENERGY & FUELS (2014)

Add to Collection

Article Agricultural Engineering

Synthesis gas production through biomass direct chemical looping conversion with natural hematite as an oxygen carrier

Zhen Huang et al.

BIORESOURCE TECHNOLOGY (2013)

Add to Collection

Review Chemistry, Multidisciplinary

Chemical looping processes for CO2 capture and carbonaceous fuel conversion - prospect and opportunity

Liang-Shih Fan et al.

ENERGY & ENVIRONMENTAL SCIENCE (2012)

Add to Collection

Article Energy & Fuels

Use of an Fe-Based Residue from Alumina Production as an Oxygen Carrier in Chemical-Looping Combustion

T. Mendiara et al.

ENERGY & FUELS (2012)

Add to Collection

Review Thermodynamics

Progress in Chemical-Looping Combustion and Reforming technologies

Juan Adanez et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2012)

Add to Collection

Article Engineering, Chemical

Carbon capture and utilization via chemical looping dry reforming

Michelle Najera et al.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2011)

Add to Collection

Article Chemistry, Multidisciplinary

Role of metal oxide support in redox reactions of iron oxide for chemical looping applications: experiments and density functional theory calculations

Fanxing Li et al.

ENERGY & ENVIRONMENTAL SCIENCE (2011)

Add to Collection

Article Chemistry, Multidisciplinary

Ionic diffusion in the oxidation of iron-effect of support and its implications to chemical looping applications

Fanxing Li et al.

ENERGY & ENVIRONMENTAL SCIENCE (2011)

Add to Collection

Article Thermodynamics

Pressurized chemical-looping combustion of coal with an iron ore-based oxygen carrier

Rui Xiao et al.

COMBUSTION AND FLAME (2010)

Add to Collection

Article Green & Sustainable Science & Technology

Chemical-looping with oxygen uncoupling for combustion of solid fuels

Tobias Mattisson et al.

INTERNATIONAL JOURNAL OF GREENHOUSE GAS CONTROL (2009)

Add to Collection

Article Energy & Fuels

Chemical-looping combustion and chemical-looping reforming in a circulating fluidized-bed reactor using Ni-based oxygen carriers

Magnus Ryden et al.

ENERGY & FUELS (2008)

Add to Collection

Article Energy & Fuels

Development of Cu-based oxygen carriers for chemical-looping combustion

LF de Diego et al.

FUEL (2004)

Add to Collection

Article Energy & Fuels

Comparison of iron-, nickel-, copper- and manganese-based oxygen carriers for chemical-looping combustion

P Cho et al.

FUEL (2004)

Add to Collection

Article Engineering, Chemical

A fluidized-bed combustion process with inherent CO2 separation;: application of chemical-looping combustion

A Lyngfelt et al.

CHEMICAL ENGINEERING SCIENCE (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.