Ultrasonic-Assisted Coalbed Methane Recovery: A Coupled Acoustic-Thermal-Mechanical-Hydrological Model

Ultrasonic propagation in coal seams is accom-panied by heat transfer, which has the potential to increase coal seam permeability, enhance coalbed methane (CBM) recovery, and prevent coal and gas outbursts. Therefore, it is important to analyze the effects of heat transfer by ultrasonic vibration on CBM recovery and evaluate the prospects of engineering applications of ultrasonic heating technology. In this study, the factors affecting heat transfer by ultrasonic vibration were analyzed theoretically; then, CBM recovery under the condition of ultrasonic heating was simulated by establishing a coupled acoustic-thermal-mechan-ical-hydrological model. The correctness of acoustic-thermal model was validated by matching simulated data with experimental data. And the accuracy of the gas flow model was verified by comparing the production data from CBM extraction boreholes with the simulated data. The research results were as follows: heat transfer by ultrasonic vibration was affected by frequency and sound pressure. When the ultrasonic frequency varied from 30 to 40 kHz and the sound pressure varied from 0.1 to 0.12 MPa, the lower the frequency, the higher the sound pressure, and the better the ultrasonic vibration heat transfer effect. In addition, the thermal expansion volumetric strain of the coal matrix caused by the ultrasonic heating of coal seams was weaker than the shrinkage volumetric strain of the coal matrix caused by gas desorption, improving the porosity and permeability of the coal seams. Furthermore, the gas drainage standard area increased by 20.8 m2 after 720 days of CBM recovery when replacing conventional CBM recovery with ultrasonic-assisted CBM recovery. With a production time of 720 days, the maximum production of CBM after ultrasonic excitation at a frequency of 40 kHz and a sound pressure of 0.10 MPa increases from 3744 to 9740 m3/day compared to conventional excitation. Our fully coupled acoustic-thermal-mechanical- hydrological model can improve current understandings of heat and mass transfer in thermal simulation of ultrasonic-enhanced CBM recovery.

Automated summary

This study confirms the effects of ultrasonic vibration on heat transfer in coal seams through theoretical analysis and simulation experiments. It reveals the influence of frequency and sound pressure on ultrasonic heat transfer, as well as the improvement of porosity and permeability of coal matrix caused by thermal expansion. Additionally, the use of ultrasonic-assisted gas recovery technology can increase gas drainage and has significant potential for engineering applications in coalbed methane recovery.