Related references
Note: Only part of the references are listed.
Article
Energy & Fuels
Yan Wang et al.
Summary: This paper investigates the use of rice straw biochar-activated peroxydisulfate oxidation technology to oxidize nitric oxide (NO) from flue gas. The main factors affecting NO removal, removal products, and free radicals are studied. Results show that the main product of NO oxidation removal is NO3- and .OH and SO4-. are identified as important free radicals for oxidizing NO. The maximum NO removal efficiency reaches 95.2% under optimized process parameters.
Article
Engineering, Environmental
Wei Zheng et al.
Summary: In this study, a feasible synthesis strategy based on mechanical ball-milling procedure was proposed to synthesize (001) surface exposed CuS with high Hg0 adsorption capacity. The controllable nucleus formation and favorable crystalline growth manner under mechanochemical condition resulted in well-structured CuS nanosheets containing abundant under-coordinated sulfur ligands, ensuring the adequate exposure of active sites. The CuS nanosheets showed exceptional Hg0 adsorption capacity and uptake rate, surpassing previous benchmark metal sulfides.
CHEMICAL ENGINEERING JOURNAL
(2023)
Article
Engineering, Environmental
Yan Wang et al.
Summary: A thermally activated double oxidants (Oxone/H2O2) advanced oxidation system was used for gaseous H2S removal. Several fundamental issues for H2S removal were systematically explored, and it was found that the double oxidants activation system showed higher free radical yields and H2S removal efficiencies. Temperature played a critical role in producing free radicals and removing H2S.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Engineering, Environmental
Feng Xin et al.
Summary: This research proposes a method to reduce elemental mercury emission from coal-fired power plants by modifying magnetospheres with H2S as a sorbent. The modified magnetospheres show high affinity towards Hg-0 and can achieve over 80% adsorption efficiency. The technology has low cost, high recyclability, and minimal impact on environmental mercury pollution.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Engineering, Environmental
Yangxian Liu et al.
Summary: In this study, a novel technique for simultaneous removal of NO and SO2 was proposed using a double metal ions-double oxidants coactivation system. The results showed that this system achieved higher free radical yield and pollutant removal efficiency compared to other systems. The removal efficiency of NO increased with higher concentrations of Oxone and Cu2+, but decreased with increasing inlet contents of NO and SO2. SO2 was completely removed under all studied process parameters.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Engineering, Environmental
Jianping Yang et al.
Summary: Porous carbons derived from one-pot carbonization and activation of wood sawdust in a molten salt medium showed superior performance in Hg-0 removal compared to carbons derived from N-2 pyrolysis method. The best molar ratio of LiCl-KCl was found to be 59:41, with an optimal molten salt temperature of 700 degrees C and a mass ratio of wood sawdust to molten salt of 1:10. The carbonization method displayed good applicability at temperatures ranging from 50 to 125 degrees C, with a high saturation Hg-0 adsorption capacity.
JOURNAL OF HAZARDOUS MATERIALS
(2022)
Review
Engineering, Environmental
Ying Li et al.
Summary: This review summarizes the recent progress of mercury removal from flue gas by existing air pollution control devices (APCDs). The sulfuric acid desulfurization system can remove most of Hg2+, while the hybrid fabric filters (HFs) are effective in removing HgP and part of Hg2+. However, the removal of Hg-0 is still a challenge.
JOURNAL OF HAZARDOUS MATERIALS
(2022)
Article
Energy & Fuels
Min Lv et al.
Summary: Co-pyrolysis of coconut shell activated carbon (AC) and polyvinyl chloride (PVC) was used to prepare a chloride-loading adsorbent with high mercury removal efficiency. The formation mechanism of C-Cl functional groups during the co-pyrolysis process was investigated, and two paths were identified. The first path involved the reformation of organic chlorine in PVC at low temperature, while the second path involved the combination of gaseous HCl with newly exposed carbon atom sites at high temperature. The study also revealed the promoting and inhibiting effects of NO, O2, and SO2 on the mercury removal ability of the chloride-loading adsorbent.
Article
Engineering, Environmental
Yingju Yang et al.
Summary: The study proposed a strategy of charge distribution modulation to design novel catalysts, and successfully developed copper ferrite spinel-type catalysts with superior catalytic performance that can efficiently oxidize Hg-0 over a wide temperature range. The research also revealed the mechanism and key steps of Hg-0 oxidation on copper ferrite.
JOURNAL OF HAZARDOUS MATERIALS
(2021)
Article
Environmental Sciences
Xinze Geng et al.
Summary: Current approaches for Mechanochemical bromination (MCB) modified fly ash have been focusing on the efficiency and mechanism of mercury removal. Results showed that the activation mechanism of MCB mainly enhances the mercury removal ability of fly ash due to the generation of C-Br with activated carbon and M-Br on hematite.
Article
Energy & Fuels
Wei Yang et al.
Summary: Two kinds of seaweed biomass-based porous carbons were prepared by microwave activation/H2O2 modification method. The modified porous carbons showed excellent Hg-0 removal capacity due to the presence of oxygen-containing functional groups as active sites for Hg-0 capture.
Article
Engineering, Environmental
Qingyu Ji et al.
Summary: This study proposes a cost-effective and efficient method using non-thermal plasma (NTP) to accelerate the reactions between H2S and SO2 on activated carbon (AC) to improve elemental mercury (Hg0) removal performance. The NTP treatment was found to significantly increase the reaction rate between H2S and SO2 on AC, leading to improved Hg0 removal efficiency.
CHEMICAL ENGINEERING JOURNAL
(2021)
Article
Energy & Fuels
Huan Liu et al.
Summary: The study investigated the efficacy of CuBr2-TCS as an adsorbent for removing Hg-0 in simulated coal-fired flue gas, demonstrating high removal efficiency. The in-depth exploration of Hg-0 removal performance under different flue gas components proved that CuBr2-TCS has a good removal effect on Hg-0.
Article
Energy & Fuels
Shuo Shi et al.
Summary: Nitrogen-doped activated carbons synthesized by microwave/KOH activation from microalgae pyrolysis by-products exhibit developed pore structure and abundant active functional groups, resulting in high CO2 adsorption capacities. The CO2 adsorption processes are mainly controlled by external mass transfer and are primarily physisorption. Additionally, the CO2 adsorption capacities of nitrogen-doped activated carbons by microwave/KOH activation are significantly better than those by thermal/KOH activation.
Article
Energy & Fuels
Weimeng Zhao et al.
Summary: The study demonstrated that brominated biomass activated carbon is an effective alternative adsorbent with good mercury removal performance in different scale experiments.
Article
Energy & Fuels
Ying Li et al.
Summary: A clean modification method combining microwave activation and H2O2 impregnation of bio-char was proposed in this study to enhance the mercury adsorption capacity, which effectively improved the Hg0 removal efficiency by improving the pore structure and functional groups of biomass porous carbons. Oxygen and nitric oxide play a significant role in the mercury removal process.
Article
Energy & Fuels
Zhen Zhang et al.
Summary: The novel copper-based Cu-MOFs materials showed high efficiency in removing mercury from flue gas, with good crystallinity and adsorption capacity. They can achieve an average removal efficiency of over 90% under various atmospheric conditions.
Review
Engineering, Environmental
Yangxian Liu et al.
Summary: Removal of pollutants from gas streams using Fenton-like oxidation systems has gained attention for its promising multi-pollutant removal capability. However, challenges like metal ion recovery, low radical utilization, and system stability remain to be addressed. Strategies like catalyst synthesis, mass transfer enhancement, and reactor optimization are proposed to overcome the existing defects and improve the efficiency of these technologies.
JOURNAL OF HAZARDOUS MATERIALS
(2021)
Review
Energy & Fuels
Yan Wang et al.
Summary: The emissions of pollutants from coal-fired flue gas pose hazards to human health and ecosystems, leading to the development of technologies for simultaneous removal of multiple pollutants. Green oxidation absorption technology shows promise by utilizing existing equipment and offering a clean treatment process. Each technology has its own strengths and weaknesses, and the synergic use of multiple technologies may be a promising strategy to address their limitations.
Article
Energy & Fuels
Boxiong Shen et al.
Article
Energy & Fuels
Boxiong Shen et al.
Article
Engineering, Environmental
Guoliang Li et al.
CHEMICAL ENGINEERING JOURNAL
(2017)
Article
Energy & Fuels
Zengqiang Tan et al.
