4.7 Article

Effect of using borax decahydrate as nanomaterials additive diesel fuel on diesel engine performance and emissions

Related references

Note: Only part of the references are listed.
Article Thermodynamics

Prognostic of diesel engine emissions and performance based on an intelligent technique for nanoparticle additives

Hayder Abed Dhahad et al.

Summary: This paper presents an intelligent technique for predicting the performance and emission characteristics of diesel engines, showing that the developed model is effective in accurately predicting diesel engine emissions.

ENERGY (2022)

Article Energy & Fuels

Experimental and numerical investigation of adding castor methyl ester and alumina nanoparticles on performance and emissions of a diesel engine

Mohamed F. Al-Dawody et al.

Summary: Experimental and numerical investigations were conducted to study the effects of adding different concentrations of alumina Nano particles to castor oil biodiesel in diesel engines. The results showed that adding 25 ppm of Al2O3 to 20% CME biodiesel significantly reduced fuel consumption rate and emissions concentration. The best reduction in smoke opacity and NOX emissions was achieved with the addition of 25 ppm Al2O3.
Article Energy & Fuels

Production, characterization and utilization of second generation biodiesel blend in diesel engine using water and nanoparticles as additives

Neeraj Kumar et al.

Summary: The study suggests that biodiesel-diesel blend dispersed with water and CeO2 nanoparticles could be a promising alternative fuel for diesel engine with lower emissions. This blend can reduce HC, CO, and NOx emissions, while enhancing fuel thermal efficiency and energy saving effects.
Article Chemistry, Applied

Understanding the role of nanoparticle size on energy, exergy, thermoeconomic, exergoeconomic, and sustainability analyses of an IC engine: A thermodynamic approach

Umit Agbulut

Summary: This study shows that nanoparticle size plays a significant role in CI engine performance. Smaller particle sizes lead to improved fuel properties and efficiency.

FUEL PROCESSING TECHNOLOGY (2022)

Article Green & Sustainable Science & Technology

Experimental exergy analyses in a DI diesel engine fuelled with a mixture of diesel fuel and TiO2 nano-particle

Samad Jafarmadar et al.

Summary: The study evaluates the operation of a diesel engine powered by blended fuel with TiO2 nanoparticles, showing improvements in energy and exergy efficiency, as well as reductions in irreversibility and exhaust losses compared to baseline diesel. The addition of TiO2 nanoparticles also leads to lower emissions of UHC, CO, and Soot, but higher NOx emissions.

ENVIRONMENTAL PROGRESS & SUSTAINABLE ENERGY (2022)

Article Thermodynamics

Effects of metal-organic framework nanoparticles on the combustion, performance, and emission characteristics of a diesel engine

Seyyed Hassan Hosseini et al.

Summary: This study investigated the use of metal-organic framework nanoparticles in diesel fuel and found that the nano-emulsion fuel blends performed similarly to diesel in terms of combustion and performance parameters. However, they exhibited significantly lower nitrogen oxide and smoke emissions. These findings are crucial for achieving a more environmentally friendly diesel combustion process.

ENERGY (2022)

Article Thermodynamics

Effects of hybrid nanoparticle additives in n-butanol/waste plastic oil/diesel blends on combustion, particulate and gaseous emissions from diesel engine evaluated with entropy-weighted PROMETHEE II and TOPSIS: Environmental and health risks of plastic waste

Abdulfatah Abdu Yusuf et al.

Summary: Due to the limited use of plastic waste recycling, a large amount of plastic waste is buried or ends up in the ocean. This study investigates the effects of waste plastic pyrolysis oil, n-butanol, hybrid nanoparticles, and diesel fuel blends on combustion, emissions, and particulates from a diesel engine. The results show that the blend fuels can significantly reduce n-alkane emissions and the content of polycyclic aromatic hydrocarbons (PAHs) in particulates, but their effects on carbon monoxide (CO) and nitrogen oxides (NOx) emissions are uncertain.

ENERGY CONVERSION AND MANAGEMENT (2022)

Review Environmental Sciences

A review on synthesis methods and recent applications of nanomaterial in wastewater treatment: Challenges and future perspectives

A. Saravanan et al.

Summary: This review paper summarizes the applications of different types of nanomaterials in wastewater treatment, with a focus on green synthesis. The paper highlights the importance of adsorption as a low-cost and efficient technique for wastewater treatment and emphasizes the advantages of nanomaterials.

CHEMOSPHERE (2022)

Article Energy & Fuels

Understanding behaviors of compression ignition engine running on metal nanoparticle additives-included fuels: A control comparison between biodiesel and diesel fuel

Anh Tuan Hoang et al.

Summary: This review highlights the critical role and potential applications of metal nanoparticles in improving the performance of diesel engines, especially when used in biodiesel. It also addresses some challenges brought by metal nanoparticles, and suggests future research directions on environmental impacts, stability properties, and economic aspects before commercial applications in the real world.
Article Energy & Fuels

Optimization of variable compression ratio diesel engine fueled with Zinc oxide nanoparticles and biodiesel emulsion using response surface methodology

R. Hussain Vali et al.

Summary: In this study, the optimization of engine parameters and the use of ZnO nanoparticles and diesel-biodiesel emulsion were explored to improve the performance, combustion, and emissions of diesel engines. The input parameters of the engine were optimized using response surface methodology, and the experiments were carried out according to a Central Composite Rotating Design matrix. The optimized engine responses showed improved brake thermal efficiency, specific energy consumption, emissions levels, in-cylinder pressure, and heat release rate.
Article Thermodynamics

Utilization of biodiesel/Al2O3 nanoparticles for combustion behavior enhancement of a diesel engine operated on dual fuel mode

K. A. Sateesh et al.

Summary: The study investigates the impact of nanofluids using Al2O3 nanoparticles on diesel engine performance, showing an improvement in engine efficiency and a reduction in harmful emissions.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2022)

Article Energy & Fuels

Experimental study on direct injection diesel engine fuelled with ferric chloride nanoparticle dispersed Cassia Fistula biodiesel blend

Sheik Hidayatulla Shariff et al.

Summary: The study showed that adding FeCl3 nanoparticles and dispersants can significantly improve the combustion efficiency of diesel engines and reduce emissions.

INTERNATIONAL JOURNAL OF ENERGY AND ENVIRONMENTAL ENGINEERING (2022)

Article Thermodynamics

Effect of Sr@ZnO nanoparticles and Ricinus communis biodiesel-diesel fuel blends on modified CRDI diesel engine characteristics

Manzoore Elahi M. Soudagar et al.

Summary: The study evaluated the performance and emission characteristics of a modified CRDI diesel engine fueled by RCME20 biodiesel blended with Sr@ZnO nanoparticles. Results indicated that under certain conditions, the engine performance was enhanced and emissions were reduced compared to RCME20 fuel.

ENERGY (2021)

Article Thermodynamics

Terminalia chebula as a novel green source for the synthesis of copper oxide nanoparticles and as feedstock for biodiesel production and its application on diesel engine

K. V. Yatish et al.

Summary: In this study, Terminalia chebula plant components were utilized for synthesizing CuO nanoparticles and producing biodiesel. The synthesized CuO NPs served as a catalyst for biodiesel production, achieving a high yield of 97.1%. The CuO NPs demonstrated good catalytic stability during the reaction process.

ENERGY (2021)

Article Thermodynamics

Wastes to energy: Improving the poor properties of waste tire pyrolysis oil with waste cooking oil methyl ester and waste fusel alcohol-A detailed assessment on the combustion, emission, and performance characteristics of a CI engine

Umit Agbulut et al.

Summary: This study shows that the addition of waste biodiesel and fusel oil can improve the performance characteristics of waste tire pyrolysis oil diesel fuel blends, including increasing brake thermal efficiency, reducing brake specific fuel consumption, and lowering carbon monoxide and nitrogen oxide emissions. Waste tire pyrolysis oil-diesel fuel blends can also be an effective tool for waste management and an alternative to fossil fuels.

ENERGY (2021)

Article Thermodynamics

Impact of aluminium oxide nanoparticles as an additive in diesel-methanol blends on a modern DI diesel engine

Jiangjun Wei et al.

Summary: The study demonstrates that adding aluminum oxide (AL(2)O(3)) nanoparticles to diesel-methanol blends can significantly improve engine performance, including enhancing peak in-cylinder pressure and thermal efficiency, reducing ignition delay and combustion duration, as well as decreasing fuel consumption and energy consumption, and lowering CO, HC, and smoke emissions.

APPLIED THERMAL ENGINEERING (2021)

Article Thermodynamics

Diesel/ biodiesel /silver thiocyanate nanoparticles/hydrogen peroxide blends as new fuel for enhancement of performance, combustion, and Emission characteristics of a diesel engine

Medhat Elkelawy et al.

Summary: The study found that the addition of nano additives and hydrogen peroxide can reduce exhaust emissions, improve combustion efficiency, and enhance thermal efficiency of the fuel in diesel engines.

ENERGY (2021)

Article Engineering, Chemical

An enhancement in the diesel engine performance, combustion, and emission attributes fueled by diesel-biodiesel and 3D silver thiocyanate nanoparticles additive fuel blends

Medhat Elkelawy et al.

Summary: The researchers found that the nanosized silver thiocyanate nanoparticles as additives in Diesel/Biodiesel fuel blends have a positive impact, reducing unburned hydrocarbons and smoke emissions, and improving combustion efficiency.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2021)

Article Thermodynamics

Diesel-oxygenated fuels ternary blends with nano additives in compression ignition engine: A step towards cleaner combustion and green environment

Ahmed El-Seesy et al.

Summary: This research aims to enhance the utilization of Jatropha biodiesel in a CI engine by using higher alcohols and graphene oxide nano-additives. The results show that higher alcohols and GO can facilitate increasing the Jatropha biodiesel fraction in the mixture with appropriate diesel engine performance enhancement.

CASE STUDIES IN THERMAL ENGINEERING (2021)

Article Thermodynamics

Effects of high-dosage copper oxide nanoparticles addition in diesel fuel on engine characteristics

Umit Agbulut et al.

Summary: The addition of CuO nanoparticles to diesel fuel can improve combustion efficiency, reduce emissions, increase fuel heating value, decrease fuel consumption, and enhance thermal efficiency. CuO additives lead to lower CO, HC, and NOx emissions, along with improved combustion characteristics and engine performance.

ENERGY (2021)

Article Thermodynamics

The combustion, performance and emissions investigation of a dual-fuel diesel engine using silicon dioxide nanoparticle additives to methanol

Jiangjun Wei et al.

Summary: The study showed that adding SiO2 nanoparticles to methanol could increase the peak pressure and peak heat release rate of a diesel engine, improve fuel efficiency and reduce emissions of CO, HC, NOx, and smoke.

ENERGY (2021)

Review Chemistry, Applied

Combustion behavior, performance and emission characteristics of diesel engine fuelled with biodiesel containing cerium oxide nanoparticles: A review

Anh Tuan Hoang

Summary: The addition of CeO2 nanoparticles into biodiesel has shown positive effects on improving fuel performance and emissions of diesel engines. However, further research is needed to investigate the impacts of CeO2 nanoparticles on particulate matter emissions, human health, and the environment.

FUEL PROCESSING TECHNOLOGY (2021)

Article Nanoscience & Nanotechnology

Blends of scum oil methyl ester, alcohols, silver nanoparticles and the operating conditions affecting the diesel engine performance and emission: an optimization study using Dragon fly algorithm

Asif Afzal et al.

Summary: The study investigated the effects of adding different proportions of silver nanoparticles and alcohols to engine performance and emissions. The results showed that the concentration of nanoparticles can reduce fuel consumption and emissions, but alcohol additives can partially offset this effect. The Dragonfly algorithm was used to optimize the experimental results.

APPLIED NANOSCIENCE (2021)

Review Energy & Fuels

The role of nanoparticles on biofuel production and as an additive in ternary blend fuelled diesel engine: A review

Michael G. Bidir et al.

Summary: This paper reviews the role of nanoparticles in biofuel production and their effects on the performance, combustion analysis, and emission characteristics of diesel engines when added to biodiesel-diesel fuel blends. The results show that adding nanoparticles can reduce fuel consumption, increase brake power, increase NOx emissions, and decrease HC, CO, and PM emissions.

ENERGY REPORTS (2021)

Proceedings Paper Materials Science, Multidisciplinary

Emission analysis of CI engine with CeO2 nanoparticles added neochloris oleoabundans biodiesel-diesel fuel blends

K. Kalaimurugan et al.

MATERIALS TODAY-PROCEEDINGS (2020)

Review Chemistry, Multidisciplinary

Preparation Techniques of TiO2 Nanofluids and Challenges: A Review

Hafiz Muhammad Ali et al.

APPLIED SCIENCES-BASEL (2018)

Review Thermodynamics

A comprehensive review on the environmental impacts of diesel/biodiesel additives

Homa Hosseinzadeh-Bandbafha et al.

ENERGY CONVERSION AND MANAGEMENT (2018)

Proceedings Paper Materials Science, Multidisciplinary

Effects of Nanoparticles blended Biodiesel on Single Cylinder CI Engine

Sivakumar Muthusamy et al.

MATERIALS TODAY-PROCEEDINGS (2018)

Article Chemistry, Multidisciplinary

Chelation assisted exfoliation of layered borides towards synthesizing boron based nanosheets

Asha Liza James et al.

RSC ADVANCES (2017)

Article Thermodynamics

Novel technique for enhancement of diesel fuel: Impact of aqueous alumina nano-fluid on engine's performance and emissions

Miqdam Tariq Chaichan et al.

CASE STUDIES IN THERMAL ENGINEERING (2017)

Article Green & Sustainable Science & Technology

Performance and emission characteristics of a CI engine fuelled with carbon nanotubes and diesel-biodiesel blends

Seyyed Hassan Hosseini et al.

RENEWABLE ENERGY (2017)

Article Green & Sustainable Science & Technology

Effects of waste fish oil biodiesel on diesel engine combustion characteristics and emission

Ayatallah Gharehghani et al.

RENEWABLE ENERGY (2017)

Review Thermodynamics

Combustion and heat transfer characteristics of nanofluid fuel droplets: A short review

Saptarshi Basu et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)

Article Engineering, Multidisciplinary

Effects of oxygen enriched combustion on pollution and performance characteristics of a diesel engine

P. Baskar et al.

ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH (2016)

Review Engineering, Multidisciplinary

The role of water-in-diesel emulsion and its additives on diesel engine performance and emission levels: A retrospective review

Suresh Vellaiyan et al.

ALEXANDRIA ENGINEERING JOURNAL (2016)

Article Chemistry, Applied

Examination of the effects of organic based manganese fuel additive on combustion and engine performance

Mehmet Celik et al.

FUEL PROCESSING TECHNOLOGY (2015)

Article Environmental Sciences

Reduction of emissions and fuel consumption in a compression ignition engine using nanoparticles

H. Soukht Saraee et al.

INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY (2015)

Proceedings Paper Materials Science, Multidisciplinary

Performance and Emission characteristics of a CI Engine fuelled with diesel and TiO2 nanoparticles as fuel additive

Rolvin D'Silva et al.

MATERIALS TODAY-PROCEEDINGS (2015)

Article Materials Science, Ceramics

Structural investigation of boron undoped and doped indium stabilized bismuth oxide nanoceramic powders

Serhat Kocyigit et al.

CERAMICS INTERNATIONAL (2013)

Article Engineering, Mechanical

The influence of nano additive blended biodiesel fuels on the working characteristics of a diesel engine

J. Sadhik Basha et al.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2013)

Article Biochemistry & Molecular Biology

The effects of dietary boric acid and borax supplementation on lipid peroxidation, antioxidant activity, and DNA damage in rats

Sinan Ince et al.

JOURNAL OF TRACE ELEMENTS IN MEDICINE AND BIOLOGY (2010)

Article Green & Sustainable Science & Technology

Biodiesel production from waste chicken fat based sources and evaluation with Mg based additive in a diesel engine

Metin Guru et al.

RENEWABLE ENERGY (2010)

Review Nanoscience & Nanotechnology

Nanofluid Applications in Future Automobiles: Comprehensive Review of Existing Data

S. Senthilraja et al.

NANO-MICRO LETTERS (2010)

Article Chemistry, Physical

Borax Mediated Layer-by-Layer Self-Assembly of Neutral Poly(vinyl alcohol) and Chitosan

Uttam Manna et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2009)

Review Thermodynamics

Metal-based reactive nanomaterials

Edward L. Dreizin

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2009)

Article Construction & Building Technology

Some physical, wood polymer biological, mechanical, and fire properties of composite (WPC) pretreated with boric acid and borax mixture

Ergun Baysal et al.

CONSTRUCTION AND BUILDING MATERIALS (2007)

Article Materials Science, Ceramics

Low-temperature synthetic route for boron carbide

S Mondal et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2005)