☆ 4.5 Article

On the Thermal Stability of a Counter-Current Fixed-Bed Gasifier

ENERGIES (2023)

Related references

Note: Only part of the references are listed.

Article Energy & Fuels

Synergic Effects of Bed Materials and Catalytic Filter Candle for the Conversion of Tar during Biomass Steam Gasification

Alessandro Antonio Papa et al.

Summary: This work focuses on the integration of a pilot-scale gasifier unit with a Solid Oxide Fuel Cell (SOFC). Experimental tests were conducted to determine the optimal operating conditions for gasification and gas cleaning. A combination of a ceramic filter candle filled with catalyst and olivine and dolomite as the bed materials yielded the best results in terms of gas composition and gas yield. The use of a metallic filter candle increased the residence time of the gas in the catalytic bed and reduced the content of toluene and naphthalene below the limits for safe operation of the SOFC.

ENERGIES (2023)

Add to Collection

Review Energy & Fuels

Biomass Gasification in Downdraft Gasifiers: A Technical Review on Production, Up-Gradation and Application of Synthesis Gas

Pulla Rose Havilah et al.

Summary: This article provides a comprehensive review of the advancement in biomass downdraft gasification technologies for high-quality synthesis gas, and comprehensively studies the factors affecting syngas production. Additionally, the up-gradation and various applications of synthesis gas are briefly discussed in this review article.

ENERGIES (2022)

Add to Collection

Article Thermodynamics

Downdraft co-gasification of high ash biomass and plastics

A. Fazil et al.

Summary: This study investigates the co-gasification of plastic waste and biomass in a downdraft gasifier. The results show that increasing the plastic content in the feedstock improves temperature, gas heating value, and cold gas efficiency while reducing clinker formation and slightly decreasing tar yield.

ENERGY (2022)

Add to Collection

Review Chemistry, Physical

Biomass gasification for sustainable energy production: A review

Ozgun Tezer et al.

Summary: Gasification process is an effective route for energy recovery from biomass, producing hydrogen-rich syngas. This paper provides a review of biomass gasification, comparing and analyzing different gasification models, designs, configurations, and operational conditions. It aims to present a holistic approach for hydrogen-rich syngas production based on current technologies, techno-economic analysis, and industrial/commercialization pathways. The article emphasizes the need to improve biomass gasification technologies for hydrogen production, considering global environmental and economic issues.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Three-stage model-based evaluation of a downdraft biomass gasifier

Saba Ghorbani et al.

Summary: Biomass gasification offers numerous advantages for a clean environment and sustainable energy. This study develops and evaluates a conceptual three-stage biomass gasifier model, which demonstrates high accuracy through verification analysis.

RENEWABLE ENERGY (2022)

Add to Collection

Article Engineering, Chemical

Design and System Evaluation of Mixed Waste Plastic Gasification Process Based on Integrated Gasification Combined Cycle System

Hui Xu et al.

Summary: Plastic products have superior performance and are widely used, but the current methods for recycling and processing waste plastics have limitations, leading to resource wasting and environmental pollution. This paper designs three different waste plastic gasification processes to achieve waste conversion, resource utilization, and carbon capture.

PROCESSES (2022)

Add to Collection

Article Energy & Fuels

Investigation of an Intensified Thermo-Chemical Experimental Set-Up for Hydrogen Production from Biomass: Gasification Process Integrated to a Portable Purification System-Part II

Donatella Barisano et al.

Summary: This study successfully demonstrated the production of high purity hydrogen from biomass feedstocks using steam/oxygen gasification. The use of almond shells as the biomass feedstock resulted in an average and stable composition of 40% H-2, with the portable purification system (PPS) providing a hydrogen stream with a final concentration of 99.99%.

ENERGIES (2022)

Add to Collection

Article Energy & Fuels

Closing of Carbon Cycle by Waste Gasification for Circular Economy Implementation in Poland

Aleksander Sobolewski et al.

Summary: Domestic coal and waste resources can support Poland's chemical industry and help solve issues related to competitiveness, supply security, and sustainable development. By reducing coal consumption and using alternative energy sources like green hydrogen, Poland can significantly reduce CO2 emissions by 2050.

ENERGIES (2022)

Add to Collection

Article Chemistry, Physical

The Effect of Pyrolysis Temperature and the Source Biomass on the Properties of Biochar Produced for the Agronomical Applications as the Soil Conditioner

Michal Kalina et al.

Summary: Biochar is an organic material that can improve soil fertility and plant growth. The properties of biochar are influenced by production conditions and the origin of the biomass. Biochar samples produced at different temperatures and residence times have similar structural features, but the physicochemical properties of the original biomass differ. Higher pyrolysis temperature results in lower yield but higher organic carbon content and surface area.

MATERIALS (2022)

Add to Collection

Article Environmental Sciences

Numerical Simulation of an Improved Updraft Biomass Gasifier Based on Aspen Plus

Fugang Zhu et al.

Summary: This paper conducts a numerical investigation and optimization on an improved updraft gasifier, overcoming the weaknesses of conventional updraft gasifiers. Using the comprehensive Aspen Plus model based on RYield and RCSTR reactors, a tar prediction model is constructed to determine tar yield. The simulation results of Aspen Plus match well with experimental results for product yields and gasification efficiency, demonstrating the accuracy of the model. The study confirms that the improved gasifier has a much lower tar content in the syngas compared to the conventional one. The inflection point of gasification efficiency occurs when the air ratio is 0.25, and the optimum steam proportion in the air is 7.5%. This comprehensive investigation provides essential information for the optimal design and operation of the improved updraft gasifier.

INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Research on Greenhouse Gas Emissions and Economic Assessment of Biomass Gasification Power Generation Technology in China Based on LCA Method

Yuan Wang et al.

Summary: China has abundant biomass resources, but there are practical difficulties in their utilization. This paper uses a life cycle assessment to find that biomass gasification power generation technology has the potential to reduce carbon emissions and improve resource utilization.

SUSTAINABILITY (2022)

Add to Collection

Article Energy & Fuels

A two-stage circulated fluidized bed process to minimize tar generation of biomass gasification for fuel gas production

Chao Wang et al.

Summary: This study tested a two-stage circulated fluidized bed process for producing low-tar fuel gas from pine chips. The results confirmed the feasibility of low-tar biomass fuel production.

APPLIED ENERGY (2022)

Add to Collection

Article Energy & Fuels

Energy Analysis of an Integrated Plant: Fluidized Bed Steam Gasification of Hydrothermally Treated Biomass Coupled to Solid Oxide Fuel Cells

Alessandro Antonio Papa et al.

Summary: An innovative process based on hydrothermal carbonization, gasification, and solid oxide fuel cells (SOFCs) technologies was developed using a commercial process simulation software called ASPEN Plus. The study focused on plant efficiency under various operating conditions, and found that gasification of hydrochar obtained at 200°C with S/C ratio of 0.6 yielded the best results.

ENERGIES (2021)

Add to Collection

Article Energy & Fuels

Entrained-Flow Coal Gasification Process Simulation with the Emphasis on Empirical Char Conversion Models Optimization Procedure

Jakub Mularski et al.

Summary: This study focuses on the impact of char conversion modeling on gasification simulation results and demonstrates the optimization of input data to empirical char conversion kinetic-diffusion model. By applying kinetic parameters, significant impacts on in-reactor gas composition and char conversion factor were observed, with the optimization procedure resulting in some of the lowest errors in comparison to experimental data.

ENERGIES (2021)

Add to Collection

Review Thermodynamics

State-of-the-art of small-scale biomass gasification systems: An extensive and unique monitoring review

Francesco Patuzzi et al.

Summary: In recent years, there has been a growing interest in small-scale biomass gasification in Central and Northern Europe. A comprehensive survey and monitoring campaign were conducted in the South Tyrolean region of Italy to assess biomass and char flows, and characterize gasification products. The data collected provides reference values for small-scale biomass gasification systems in the European market and explores potential utilization pathways for chars.

ENERGY (2021)

Add to Collection

Review Engineering, Chemical

The Role of Pyrolysis and Gasification in a Carbon Negative Economy

Robert C. Brown

Summary: The International Panel on Climate Change and the 2015 Climate Summit in Paris recommend coupling efforts to reduce carbon emissions with carbon removal from the atmosphere to achieve carbon negative energy. This paper focuses on the prospects for thermochemical approaches such as pyrolysis and gasification, describing their fundamentals and characteristics, as well as their potential integration with carbon removal.

PROCESSES (2021)

Add to Collection

Editorial Material Engineering, Chemical

Recent Advances in Fluidized Bed Hydrodynamics and Transport Phenomena-Progress and Understanding

Alberto Di Renzo et al.

PROCESSES (2021)

Add to Collection

Article Energy & Fuels

A Phenomenological Model of a Downdraft Biomass Gasifier Flexible to the Feedstock Composition and the Reactor Design

Michela Costa et al.

Summary: A one-dimensional phenomenological model for biomass gasification in downdraft reactors was developed and experimentally validated. The model showed good agreement with locally measured temperature, pressure drop, and gas composition along the reactor axis. Parametric analyses revealed the impact of porosity and biomass moisture content on the gasification process.

ENERGIES (2021)

Add to Collection

Article Energy & Fuels

On the Mathematical Modelling of a Moving-Bed Counter-Current Gasifier Fuelled with Wood-Pellets

Andreas Schwabauer et al.

Summary: This work focuses on mathematical modelling of a counter-current moving-bed gasifier fuelled by wood-pellets. Two versions of the model have been developed, and unique procedures have been created to provide stable solutions and remove difficulties encountered by conventional numerical methods in modelling counter-current reactors.

ENERGIES (2021)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Downdraft biomass gasification: A review on concepts, designs analysis, modelling and recent advances

Prashant Sharma et al.

Summary: Biomass is considered as one of the most accessible renewable energy sources, with gasification being one of the best ways to convert biomass energy into producer gas. Downdraft gasifiers are seen as the most suitable gasifiers for small scale gasification applications, and researchers are continuously working to enhance their performance, particularly focusing on rural end applications.

MATERIALS TODAY-PROCEEDINGS (2021)

Add to Collection

Article Engineering, Chemical

Simulation of a Downdraft Gasifier for Production of Syngas from Different Biomass Feedstocks

Mateus Paiva et al.

Summary: Modeling and simulation of biomass gasification processes using UniSim Design software allowed for the prediction of syngas composition, with a sensitivity analysis determining the best operating parameters for maximizing CO and H-2 composition.

CHEMENGINEERING (2021)

Add to Collection

Article Energy & Fuels

Product Distribution and Characteristics of Pyrolyzing Microalgae (Nannochloropsis oculata), Cotton Gin Trash, and Cattle Manure as a Cobiomass

Muhammad U. Hanif et al.

ENERGIES (2020)

Add to Collection

Article Energy & Fuels

A Moving Bed Reactor for Thermochemical Energy Storage Based on Metal Oxides

Nicole Carina Preisner et al.

ENERGIES (2020)

Add to Collection

Article Energy & Fuels

Syngas Production, Clean-Up and Wastewater Management in a Demo-Scale Fixed-Bed Updraft Biomass Gasification Unit

Gabriele Cali et al.

ENERGIES (2020)

Add to Collection

Article Engineering, Chemical

Design and Optimization of Fluidized Bed Reactor Operating Conditions for Struvite Recovery Process from Swine Wastewater

Soomin Shim et al.

PROCESSES (2020)

Add to Collection

Article Engineering, Chemical

The bioliq® Entrained-Flow Gasifier - A Model for the German Energiewende

Mark Eberhard et al.

CHEMBIOENG REVIEWS (2020)

Add to Collection

Article Engineering, Chemical

CFD-DEM Simulation of a Coating Process in a Fluidized Bed Rotor Granulator

Philipp Grohn et al.

PROCESSES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Effect of Pyrolysis Temperature on Biochar Microstructural Evolution, Physicochemical Characteristics, and Its Influence on Biochar/Polypropylene Composites

Ahmed Y. Elnour et al.

APPLIED SCIENCES-BASEL (2019)

Add to Collection

Article Energy & Fuels

A Downdraft Fixed-Bed Biomass Gasification System with Integrated Products of Electricity, Heat, and Biochar: The Key Features and Initial Commercial Performance

Yong Huang et al.

ENERGIES (2019)

Add to Collection

Article Energy & Fuels

Influence of Pyrolysis Gas on Volatile Yield and CO2 Reaction Kinetics of the Char Samples Generated in a High-Pressure, High-Temperature Flow Reactor

Vijayaragavan Krishnamoorthy et al.

ENERGIES (2019)

Add to Collection

Article Energy & Fuels

Biomass Chars: The Effects of Pyrolysis Conditions on Their Morphology, Structure, Chemical Properties and Reactivity

Chamseddine Guizani et al.

ENERGIES (2017)

Add to Collection

Article Chemistry, Applied

Numerical study on entrained-flow gasification performance using combined slag model and experimental characterization of slag properties

Dmitry Safronov et al.

FUEL PROCESSING TECHNOLOGY (2017)

Add to Collection

Article Energy & Fuels

Tackling the challenges in modelling entrained-flow gasification of low-grade feedstock

Thomas Kolb et al.

JOURNAL OF THE ENERGY INSTITUTE (2016)

Add to Collection

Review Energy & Fuels

Gasification Processes Old and New: A Basic Review of the Major Technologies

Ronald W. Breault

ENERGIES (2010)

Add to Collection

Article Energy & Fuels

Wood Combustion in an Overfeed Packed Bed, Including Detailed Measurements within the Bed

Elisabeth Girgis et al.

ENERGY & FUELS (2010)

Add to Collection

Article Energy & Fuels

Modelling of an updraft fixed-bed gasifier operated with softwood pellets

C. Mandl et al.

FUEL (2010)

Add to Collection

Review Thermodynamics

Modeling of biomass gasification in fluidized bed

A. Gomez-Barea et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2010)

Add to Collection

Article Thermodynamics

Asymptotic analysis of stationary adiabatic premixed flames in porous inert media

Fernando M. Pereira et al.

COMBUSTION AND FLAME (2009)

Add to Collection

Article Thermodynamics

Unsteady one-dimensional model for a bed combustion of solid fuels

W Yang et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY (2004)

Add to Collection

Article Energy & Fuels

Co-current and counter-current fixed bed combustion of biofuel - a comparison

H Thunman et al.

FUEL (2003)

Add to Collection

Article Thermodynamics

Modeling of the combustion front in a countercurrent fuel converter

H Thunman et al.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2002)

Add to Collection

Article Computer Science, Software Engineering

A MATLAB differentiation matrix suite

JAC Weideman et al.

ACM TRANSACTIONS ON MATHEMATICAL SOFTWARE (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.