Related references
Note: Only part of the references are listed.Trade-off characteristic between soot and oxides of nitrogen emission with pre-injected diesel and biodiesel in a SICI-CIDI engine
M. Prabhahar et al.
FUEL (2023)
Experimental and kinetic study of the effects of n-butanol addition on toluene reference fuel auto-ignition
Zhongjun Wan et al.
FUEL (2023)
An analysis of the in-cylinder soots generated from the main- and post-injection combustion in diesel engines
Wei Zhang et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2023)
Ammonia-hydrogen engine with reactivity-controlled turbulent jet ignition (RCTJI)
Zongkuan Liu et al.
FUEL (2023)
Combustion reaction kinetics of biodiesel/n-butanol blends: Experiments in an ultrahigh-pressure rapid compression machine
Wei Zhou et al.
COMBUSTION AND FLAME (2022)
Soot formation mechanism of modern automobile engines and methods of reducing soot emissions: A review
E. Jiaqiang et al.
FUEL PROCESSING TECHNOLOGY (2022)
Comparative investigation of ignition behavior of butanol isomers using constant volume combustion chamber under diesel-engine like conditions
Jinlin Han et al.
FUEL (2021)
Feasibility study of the combustion strategy of n-butanol/diesel dual direct injection (DI2) in a compression-ignition engine
Yikang Cai et al.
FUEL (2021)
Determination and utilization of optimal diesel/n-butanol/biogas derivation for small utility dual fuel diesel engine
Sunil Kumar Mahla et al.
FUEL (2021)
A new skeletal mechanism for diesel-n-butanol blends combustion in engine
Yuqiang Li et al.
FUEL (2020)
The effect of ammonia addition on the low-temperature autoignition of n-heptane: An experimental and modeling study
Liang Yu et al.
COMBUSTION AND FLAME (2020)
Effects of Biodiesel Addition on the Physical Properties and Reactivity of the Exhaust Soot Particles from Diesel Engine
Xuyang Zhang et al.
ENERGIES (2020)
Construction of a compact skeletal mechanism for acetone-n-butanol-ethanol (ABE)/diesel blends combustion in engines using a decoupling methodology
Yuqiang Li et al.
FUEL PROCESSING TECHNOLOGY (2020)
Estimation of NOx and soot emission from a constant volume n-butanol/n-dodecane blended spray using unsteady flamelet model based on n-dodecane/n-butanol/NOx/PAH chemistry
Anil Bhurao Wakale et al.
JOURNAL OF THE ENERGY INSTITUTE (2020)
n-Butanol reactivity modulation with early fuel injections for low NOx compression ignition combustion
Shui Yu et al.
FUEL (2019)
Influence of EGR on the simultaneous reduction of NOx-smoke emissions trade-off under CNG-biodiesel dual fuel engine
S. K. Mahla et al.
ENERGY (2018)
Numerical optimization and comparative study of n-butanol concentration stratification combustion and n-butanol/diesel reactivity stratification combustion for advanced compression ignition (CI) engine
Junhua Xiao et al.
FUEL (2018)
A comparative analysis of the engine performance, exhaust emissions and combustion behaviors of a compression ignition engine fuelled with biodiesel/diesel/1-butanol (C4 alcohol) and biodiesel/diesel/n-pentanol (C5 alcohol) fuel blends
Murat Kadir Yesilyurt et al.
ENERGY (2018)
The individual effects of cetane number, oxygen content or fuel properties on the ignition delay, combustion characteristics, and cyclic variation of a turbocharged CRDI diesel engine - Part 1
Gvidonas Labeckas et al.
ENERGY CONVERSION AND MANAGEMENT (2017)
Development and validation of a new reduced diesel-n-butanol blends mechanism for engine applications
Haozhong Huang et al.
ENERGY CONVERSION AND MANAGEMENT (2017)
Development of a reduced n-butanol mechanism with combined reduction methods
Hongqing Feng et al.
FUEL (2017)
Assessment of the impact of post-injection on exhaust pollutants emitted from a diesel engine fueled with biodiesel
Hao Li et al.
RENEWABLE ENERGY (2017)
Curve matching, a generalized framework for models/experiments comparison: An application to n-heptane combustion kinetic mechanisms
M. S. Bernardi et al.
COMBUSTION AND FLAME (2016)
Experimental study of co-combustion ratio on fuel consumption and emissions of NG-diesel dual-fuel heavy-duty engine equipped with a common rail injection system
Chun-hua Zhang et al.
JOURNAL OF THE ENERGY INSTITUTE (2016)
A reduced toluene reference fuel chemical kinetic mechanism for combustion and polycyclic-aromatic hydrocarbon predictions
Hu Wang et al.
COMBUSTION AND FLAME (2015)
Development of a reduced n-butanol/biodiesel mechanism for a dual fuel engine
Xin Wang et al.
FUEL (2015)
A short mechanism for the low-temperature ignition of n-heptane at high pressures
Juan C. Prince et al.
FUEL (2015)
n-Butanol droplet combustion: Numerical modeling and reduced gravity experiments
Fahd E. Alam et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2015)
Skeletal reaction model generation, uncertainty quantification and minimization: Combustion of butane
Yuxuan Xin et al.
COMBUSTION AND FLAME (2014)
Improved Kinetic Model of the Low-Temperature Oxidation of n-Heptane
Matteo Pelucchi et al.
ENERGY & FUELS (2014)
Combustion characteristics, performance and exhaust emissions of a diesel engine fueled with a waste cooking oil biodiesel mixture
Ozer Can
ENERGY CONVERSION AND MANAGEMENT (2014)
Sooting limits of nonpremixed n-heptane, n-butanol, and methyl butanoate flames: Experimental determination and mechanistic analysis
Sili Deng et al.
FUEL (2014)
Combustion and emission characteristics of a HCCI engine fuelled with n-butanol-gasoline blends
Bang-Quan He et al.
FUEL (2013)
A comprehensive chemical kinetic combustion model for the four butanol isomers
S. Mani Sarathy et al.
COMBUSTION AND FLAME (2012)
Experimental and Modeling Study of n-Butanol Oxidation at High Temperature
Jiaxiang Zhang et al.
ENERGY & FUELS (2012)
Chemical kinetic mechanism and a skeletal model for oxidation of n-heptane/methanol fuel blends
Hanjun Xu et al.
FUEL (2012)
Experimental study on performance and emissions of a high speed diesel engine fuelled with n-butanol diesel blends under premixed low temperature combustion
Gerardo Valentino et al.
FUEL (2012)
Diesel soot oxidation during the late combustion phase
Jinou Song et al.
COMBUSTION AND FLAME (2011)
Shock tube investigations of ignition delays of n-butanol at elevated pressures between 770 and 1250 K
K. A. Heufer et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2011)
Progress in the production and application of n-butanol as a biofuel
Chao Jin et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2011)
Recent progress in the development of diesel surrogate fuels
William J. Pitz et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2011)
A path flux analysis method for the reduction of detailed chemical kinetic mechanisms
Wenting Sun et al.
COMBUSTION AND FLAME (2010)
Skeletal mechanism generation for surrogate fuels using directed relation graph with error propagation and sensitivity analysis
Kyle E. Niemeyer et al.
COMBUSTION AND FLAME (2010)
Toward accommodating realistic fuel chemistry in large-scale computations
Tianfeng Lu et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2009)
An efficient error-propagation-based reduction method for large chemical kinetic mechanisms
P. Pepiot-Desjardins et al.
COMBUSTION AND FLAME (2008)
Experimental validation of a kinetic multi-component mechanism in a wide HCCI engine operating range for mixtures of n-heptane, iso-octane and toluene: Influence of EGR parameters
Hatim Machrafi
ENERGY CONVERSION AND MANAGEMENT (2008)
Share Paper
