☆ 4.5 Review

Energy Harvesting Technologies and Devices from Vehicular Transit and Natural Sources on Roads for a Sustainable Transport: State-of-the-Art Analysis and Commercial Solutions

ENERGIES (2023)

Related references

Note: Only part of the references are listed.
Article Materials Science, Multidisciplinary

Harvesting Wide Frequency Micromechanical Vibration Energy and Wind Energy with a Multi-Mode Triboelectric Nanogenerator for Traffic Monitoring and Warning

Chunchun Yang et al.

Summary: The multi-mode triboelectric nanogenerator (M-TENG) proposed in this study aims to solve traffic safety issues by harvesting wind energy and mechanical vibrational energy for traffic warning devices.

ADVANCED MATERIALS TECHNOLOGIES (2023)

Add to Collection
Review Environmental Studies

Effects of dust on the performance of solar panels - a review update from 2015-2020

Raj Kumar Saini et al.

Summary: Solar power plays a significant role in global energy contribution, but the performance of solar panels is influenced by geographical and environmental factors. Dust, as an important ecological factor, has a significant impact on the performance of solar panels. Studies show that the research on the performance of solar panels is more effective in hot and dusty areas. This review article aims to provide insight into the impact of dust particles on the performance of solar panels and recommends the adoption of modern cleaning techniques for PV modules to improve their efficiency.

ENERGY & ENVIRONMENT (2023)

Add to Collection
Article Engineering, Electrical & Electronic

Experimental and Field Study of a Pavement Thermoelectric Energy Harvesting System Based on the Seebeck Effect

Zhongwu Xie et al.

Summary: In this study, a thermoelectric power generation device for road engineering was developed and its output performance was experimentally investigated. The results showed that the temperature difference has a significant impact on the output power of the device, with deeper burying depth leading to lower output voltage and higher temperature difference resulting in higher output voltage. The developed system enables the conversion of road surface heat energy and reduction of internal road surface temperature.

JOURNAL OF ELECTRONIC MATERIALS (2023)

Add to Collection
Article Energy & Fuels

Design of piezoelectric device compatible with pavement considering traffic: Simulation, laboratory and on-site

Huazhi Yuan et al.

Summary: This paper introduces a road-compatible piezoelectric power generation device, which is verified for its compatibility and practical electrical output in road traffic through experiments and monitoring, eventually forming an intelligent power generation pavement design with pavement practicality.

APPLIED ENERGY (2022)

Add to Collection
Article Energy & Fuels

Available Technologies and Commercial Devices to Harvest Energy by Human Trampling in Smart Flooring Systems: A Review

Paolo Visconti et al.

Summary: Technological innovation has led to increased global demand for electrical power and energy, making energy harvesting a significant research area. This paper analyzes the current state-of-art of smart energy harvesting floors and identifies the best solution for powering lighting systems and charging columns. Various energy harvesting mechanisms, such as piezoelectric, electromagnetic, triboelectric, and hybrids, are discussed. Additionally, scientific research and commercial offerings in this field are presented.

ENERGIES (2022)

Add to Collection
Article Energy & Fuels

Evaluation of the Pavement Geothermal Energy Harvesting Technologies towards Sustainability and Renewable Energy

Ebrahim Hamid Hussein Al-Qadami et al.

Summary: This paper provides a comprehensive overview of the potentials of harvesting thermal energy from asphalt pavement and assesses the level of achievement in developed technologies. The thermal energy harvesting technologies are categorized and described in detail, with a summary of gaps and future directions. The fundamental knowledge introduced here can inspire researchers to explore the high potentials of utilizing pavements as a clean and sustainable energy source.

ENERGIES (2022)

Add to Collection
Article Thermodynamics

Uniform stress distribution road piezoelectric generator with free-fixed-end type central strike mechanism

Seong Do Hong et al.

Summary: A self-powered energy harvester was developed to predict and detect black ice on real roads, with enhanced energy harvesting performance. The URPG installed on roads can power a wireless sensor system and charge a cellphone battery.

ENERGY (2022)

Add to Collection
Article Chemistry, Analytical

Three Frequency Up-Converting Piezoelectric Energy Harvesters Caused by Internal Resonance Mechanism: A Narrative Review

Jian Liu et al.

Summary: This paper introduces a frequency up-converting piezoelectric energy harvester based on an internal resonance mechanism, which has advantages of lower excitation level, less energy loss, and narrower operating bandwidth compared to other mechanisms.

MICROMACHINES (2022)

Add to Collection
Article Green & Sustainable Science & Technology

Performance Assessment and Comparison of Two Piezoelectric Energy Harvesters Developed for Pavement Application: Case Study

Chenchen Li et al.

Summary: This study designed and manufactured bridge-unit-based and pile-unit-based piezoelectric devices, and found that the pile structure device has higher elastic modulus and more reliable electrical performance compared to the bridge structure device, indicating better application prospects in road engineering.

SUSTAINABILITY (2022)

Add to Collection
Article Chemistry, Multidisciplinary

Asphalt Heat Recovery Application for Sustainable Green Energy

Angel Dogeanu et al.

Summary: This study aims to explore the feasibility of heat recovery and its impact on energy harvesting efficiency and asphalt surface temperature through numerical modeling and validation. The results showed favorable heat recovery and reduction in surface temperature, highlighting the need for further research on heat recovery system and pump automation to optimize energy efficiency.

APPLIED SCIENCES-BASEL (2022)

Add to Collection
Article Engineering, Mechanical

Dynamic analysis and design of power management circuit of the nonlinear electromagnetic energy harvesting device for the automobile suspension

Minghui Yao et al.

Summary: A nonlinear electromagnetic energy harvester (EMEH) for automobile suspension is designed in this paper. The magnetic flux density and magnet repulsive force are determined by finite element analysis. A dynamic model of a quarter car with the nonlinear EMEH under random road excitation is established. The influence of structure parameters on output characteristics of the nonlinear EMEH is studied. It is found that higher road class and car speed result in better output characteristics of the nonlinear EMEH. Additionally, the introduction of nonlinear magnet repulsive force significantly improves the output power compared to the linear EMEH.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Add to Collection
Article Chemistry, Physical

Waterbomb-origami inspired triboelectric nanogenerator for smart pavement-integrated traffic monitoring

Yafeng Pang et al.

Summary: This study presents a novel approach for traffic monitoring using a waterbomb-origami-inspired triboelectric nanogenerator (WO-TENG). The WO-TENG integrates smart pavement and offers lightweight, cost-effective, excellent deformability, flexibility, and self-rebounding properties. The electrical performance of the WO-TENG is significantly improved compared to existing origami-based TENG, and multiple tribo-pairs show great synchronicity. The fully-packaged self-driven WO-TENG successfully decouples the influence of vehicle speed and weight on sensing accuracy, indicating its feasibility and stability for traffic monitoring. Accurate evaluation of vehicle speed, number, and types can be achieved, regardless of voltage amplitude and time interval electrical wave.

NANO RESEARCH (2022)

Add to Collection
Article Green & Sustainable Science & Technology

Non-intrusive movable energy harvesting devices: Materials, designs, and their prospective uses on transportation infrastructures

Lukai Guo et al.

Summary: As low-carbon and smart cities continue to develop, there is a growing need for non-intrusive and movable energy harvesters. This review examines the feasibility of developing such harvesters on transportation infrastructures and explores the advancements in energy materials and innovative designs. The study concludes that some non-intrusive and movable energy harvesters can be implemented on transportation infrastructures with considerable power outputs.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2022)

Add to Collection
Article Engineering, Geological

Experimental study on the road energy harvesting of piezoelectric ceramic in unbound granular materials based on a large-scale triaxial apparatus

Xiangxing Lin et al.

Summary: The application of piezoelectric ceramic in traffic engineering has gained attention, but its use in unbound granular materials (UGMs) in pavement base or subbase layers is understudied. This study found that the open-circuit voltage is higher in saturated samples compared to samples with optimum moisture condition. Increasing confining pressure and cyclic stress magnitude leads to higher open-circuit voltage, while the influence of initial deviatoric stress is minimal. Power generation by piezoelectric ceramic reduces the resilient modulus of UGMs. Installing piezoelectric ceramic in UGMs is feasible and provides an alternative way to harvest mechanical energy from traffic.

ACTA GEOTECHNICA (2022)

Add to Collection
Article Chemistry, Analytical

Multimodal Multidirectional Piezoelectric Vibration Energy Harvester by U-Shaped Structure with Cross-Connected Beams

Hongbo Qin et al.

Summary: This paper introduces a multidirectional piezoelectric vibration energy harvester based on an improved U-shaped structure, which can capture vibrations in 3D space at low frequencies and demonstrate superior performance under various conditions through experiments.

MICROMACHINES (2022)

Add to Collection
Article Materials Science, Multidisciplinary

A Multi-Modal Energy Harvesting Device for Multi-Directional and Low-Frequency Wave Energy

Yikai Zhu et al.

Summary: This paper presents a multi-modal energy harvesting device using a cross beam structure, which efficiently harvests multi-frequency vibration energy in multiple directions, improving the efficiency of low-bandwidth energy harvesting.

FRONTIERS IN MATERIALS (2022)

Add to Collection
Article Chemistry, Physical

A thermoelectric energy harvesting system for pavements with a fin cooling structure

Jian Wei et al.

Summary: A multi-layer thermoelectric energy harvesting system for pavements is proposed in this paper to address the current problems in pavement thermoelectric energy harvesting systems. By optimizing the structure and using aluminum fins, the system significantly improves road utilization and power generation. Experimental results show that the system is capable of effectively collecting a large amount of electricity in a short period of time, which is of great significance for improving road utilization, reducing power generation costs, and enabling large-scale utilization.

SUSTAINABLE ENERGY & FUELS (2022)

Add to Collection
Article Green & Sustainable Science & Technology

Analysis of mechanical response and energy efficiency of a pavement integrated photovoltaic/thermal system (PIPVT)

Bochao Zhou et al.

Summary: This research evaluates the potential of a pavement integrated PV/T system (PIPVT) that incorporates photovoltaic/thermal technology into roads for power and thermal energy harvesting. The results show that PIPVT can significantly reduce the solar panel's temperature and achieve efficient energy collection.

RENEWABLE ENERGY (2022)

Add to Collection
Article Chemistry, Analytical

A Bridge-Shaped Vibration Energy Harvester with Resonance Frequency Tunability under DC Bias Electric Field

Guan Duan et al.

Summary: A bridge-shaped piezoelectric energy harvester (PEH) capable of tuning its resonance frequency by applying a DC electric field is proposed in this study. Experimental results demonstrate that the resonance frequency of the PEH can be effectively adjusted by the DC electric field, leading to improved output power and charging response.

MICROMACHINES (2022)

Add to Collection
Article Materials Science, Multidisciplinary

Self-Powered Intelligent Voice Navigation Tactile Pavement Based on High-Output Hybrid Nanogenerator

Dongjie Jiang et al.

Summary: Improving the safety and usability of blind movement is crucial. This study introduces a distributed self-powered intelligent voice navigation tactile pavement (SVP) that utilizes a hybrid nanogenerator to achieve unconscious interaction and high navigation accuracy. The SVP addresses the challenges of GPS navigation delay and lack of map information, while also providing energy supply for future IoT and smart city construction.

ADVANCED MATERIALS TECHNOLOGIES (2022)

Add to Collection
Article Engineering, Electrical & Electronic

Design and Analysis of a Novel Adjustable SVAWT for Wind Energy Harvesting in New Energy Vehicle

Zhen Zhao et al.

Summary: The new energy vehicle is an effective solution to global warming, but it faces challenges such as short mileage and limited availability of charging stations. This paper proposes a novel adjustable Savonius vertical axis wind turbine (SVAWT) that can harness wind energy to power new energy vehicles, ensuring higher energy transfer efficiency.

WORLD ELECTRIC VEHICLE JOURNAL (2022)

Add to Collection
Proceedings Paper Energy & Fuels

High Efficient Energy Harvesting Interface Circuit for Tire Pressure Monitoring Systems

Maxim Germer et al.

Summary: This paper presents a simple but highly efficient boost converter to overcome the low output voltage issue in electromagnetic energy harvesters for tire pressure monitoring systems (TPMS). By studying the circuit performance, it is possible to maximize the collection and transfer of energy without the need for a connected load.

2022 WIRELESS POWER WEEK (WPW) (2022)

Add to Collection
Review Materials Science, Textiles

A review on piezoelectric fibers and nanowires for energy harvesting

Bilal Zaarour et al.

Summary: Recent advances in self-powered electronic devices have led to the development of energy-harvesting technology, with a focus on piezoelectric energy harvesters. Materials such as piezoelectric polymeric fibers, inorganic piezoelectric fibers, and inorganic nanowires show great potential for energy-harvesting applications.

JOURNAL OF INDUSTRIAL TEXTILES (2021)

Add to Collection
Article Thermodynamics

A lever-type piezoelectric energy harvester with deformation-guiding mechanism for electric vehicle charging station on smart road

Deok Hwan Jeon et al.

Summary: This study presents a novel concept to enhance the energy generation performance of piezoelectric energy harvesters used as charging stations on roads, overcoming the limitations of low electrical output and durability under extremely low road displacement conditions. The proposed lever-type piezoelectric energy harvester achieved significantly higher electrical performance compared to previous studies, with 467% higher output power than vibration type road energy harvesters. The results demonstrate that the energy generated by the proposed harvester can potentially be used as a power source for electric vehicles on smart roads.

ENERGY (2021)

Add to Collection
Review Green & Sustainable Science & Technology

Review and analysis of energy harvesting technologies in roadway transportation

Jianzhong Pei et al.

Summary: The transition of energy supply for roadway transportation from traditional fossil fuels to sustainable energy sources is essential for energy security and environmental sustainability in smart cities. Roadway-based energy harvesting technologies have shown promise, but face challenges such as low energy output and durability issues. This study provides a comprehensive analysis and categorization of energy harvesting technologies for roadway transportation, highlighting the need for future research and development to address these limitations and optimize applications.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection
Article Chemistry, Analytical

Piezoelectric Energy Harvesting towards Self-Powered Internet of Things (IoT) Sensors in Smart Cities

Iman Izadgoshasb

Summary: Information and communication technologies (ICT) play a crucial role in smart cities, with smart sensing devices benefiting from 5G and the Internet of Things. Despite this, sustainable power sources and self-powered active sensing devices remain a major concern, highlighting the promising potential of piezoelectric energy harvesters in this field.

SENSORS (2021)

Add to Collection
Article Chemistry, Physical

Paint based triboelectric nanogenerator using facile spray deposition towards smart traffic system and security application

Jonghyeon Yun et al.

Summary: The development of a paint-based TENG to generate electricity from wasted energy resulted in a 280% increase in output. The PBT showed stability through the use of various materials for fabrication.

NANO ENERGY (2021)

Add to Collection
Article Green & Sustainable Science & Technology

Harvesting Solar Energy from Asphalt Pavement

Md Fahim Tanvir Hossain et al.

Summary: This study introduces a new technique to harvest solar energy from asphalt pavements, store it, and convert it into electric power. Through testing different materials, the most efficient ones were selected for the energy harvester system, and data was collected through field tests. The results show promising potential for improving pedestrian safety.

SUSTAINABILITY (2021)

Add to Collection
Review Engineering, Electrical & Electronic

Technology evolution from micro-scale energy harvesters to nanogenerators

Xinge Guo et al.

Summary: Energy harvesting technologies have developed significantly since the end of the last century, providing sustainable power supplies for wireless sensor nodes in various locations. These technologies continue to advance through improved performance and hybrid strategies for more efficient mechanical energy utilization. The integration of energy harvesters with self-sustainable systems and AI technology is anticipated for the future.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2021)

Add to Collection
Article Engineering, Electrical & Electronic

A novel road energy harvesting system based on a spatial double V-shaped mechanism for near-zero-energy toll stations on expressways

Mengdie Sun et al.

Summary: Researchers are exploring renewable energy technologies to replace traditional energy sources. The number of expressways and toll stations in China has increased rapidly, offering great potential for kinetic energy scavenging. A novel road energy harvesting system based on a spatial double V-shaped mechanism has been proposed for self-powering small electronic accessories at near-zero-energy toll stations on expressways.

SENSORS AND ACTUATORS A-PHYSICAL (2021)

Add to Collection
Article Instruments & Instrumentation

Development and application performance of road spring-type piezoelectric transducer for energy harvesting

Jun Wang et al.

Summary: A new road piezoelectric transducer with specified flexibility was designed and compared with two structures. The spring-type piezoelectric energy harvester showed 2.24 times higher output power compared to the plane type, and it exhibited good durability under fatigue testing, making it suitable for road engineering. In actual road testing, the spring-type piezoelectric harvester achieved a maximum output power of 592.77 mW for a matching resistance of 3 k omega when a pickup truck drove at a speed of 40 km h(-1).

SMART MATERIALS AND STRUCTURES (2021)

Add to Collection
Article Chemistry, Analytical

A Curve-Shaped Beam Bistable Piezoelectric Energy Harvester with Variable Potential Well: Modeling and Numerical Simulation

Xiaoyu Chen et al.

Summary: This study proposes a novel bistable piezoelectric energy harvester with a variable potential well, which can facilitate interwell oscillations by introducing a spring. Numerical simulations show that the stiffness of the spring has a significant impact on system characteristics, enabling large-amplitude oscillations under low excitation conditions.

MICROMACHINES (2021)

Add to Collection
Article Nanoscience & Nanotechnology

Magnetic lifting triboelectric nanogenerators (ml-TENG) for energy harvesting and active sensing

Ali Matin Nazar et al.

Summary: The study introduces magnetic lifting triboelectric nanogenerators (ml-TENG) for energy harvesting and active sensing under cyclic loading like traffic. By utilizing magnetic force to induce repulsive force for relative displacement between electrodes and dielectric layers in sliding mode, the ml-TENG demonstrated strong electrical performance with open-circuit voltage of 4 V and output power of 340 mu W per capsule. The development of a self-powered velocity active sensing system using ml-TENG, achieving a maximum open-circuit voltage of 7.2 V at a velocity of 15 km/h during field tests, showcases its potential for real-world applications such as velocity detection.

APL MATERIALS (2021)

Add to Collection
Article Energy & Fuels

A comparison of energy harvesting from cement and asphalt on road pavement using thermoelectric module

Yuttana Mona et al.

Summary: Energy harvesting from road pavements using thermoelectric generator (TEG) modules was studied, with asphalt pavement showing superior solar energy absorption and higher electromotive force (e.m.f.) voltages compared to cement. Water-cooling system provided a larger temperature difference for generating higher e.m.f. voltages from the TEG module.

ENERGY REPORTS (2021)

Add to Collection
Review Engineering, Electrical & Electronic

Energy Harvesting Mechanisms in a Smart City-A Review

Ajibike Eunice Akin-Ponnle et al.

Summary: This paper discusses the issue of powering IoT nodes for uninterrupted optimization of smart cities, explores energy harvesting as a possible solution, and suggests that energy sources can be application specific.

SMART CITIES (2021)

Add to Collection
Review Energy & Fuels

A critical review of roadway energy harvesting technologies

Mohammadreza Gholikhani et al.

APPLIED ENERGY (2020)

Add to Collection
Review Energy & Fuels

Tuning Techniques for Piezoelectric and Electromagnetic Vibration Energy Harvesters

Luigi Costanzo et al.

ENERGIES (2020)

Add to Collection
Article Energy & Fuels

Limitations and Characterization of Energy Storage Devices for Harvesting Applications

Roberto de Fazio et al.

ENERGIES (2020)

Add to Collection
Review Materials Science, Multidisciplinary

Material aspects of triboelectric energy generation and sensors

Dong Wook Kim et al.

NPG ASIA MATERIALS (2020)

Add to Collection
Article Thermodynamics

Enhanced energy-generation performance of a landfilled road-capable piezoelectric harvester to scavenge energy from passing vehicles

Seong Do Hong et al.

ENERGY CONVERSION AND MANAGEMENT (2020)

Add to Collection
Review Green & Sustainable Science & Technology

Recent Developments in the Energy Harvesting Systems from Road Infrastructures

Niloufar Zabihi et al.

SUSTAINABILITY (2020)

Add to Collection
Article Chemistry, Physical

Origami-tessellation-based triboelectric nanogenerator for energy harvesting with application in road pavement

He Zhang et al.

NANO ENERGY (2020)

Add to Collection
Review Construction & Building Technology

An analytical review on the evaluation of wind resource and wind turbine for urban application: Prospect and challenges

Zinat Tasneem et al.

DEVELOPMENTS IN THE BUILT ENVIRONMENT (2020)

Add to Collection
Review Environmental Studies

Of renewable energy, energy democracy, and sustainable development: A roadmap to accelerate the energy transition in developing countries

Maria Mercedes Vanegas Cantarero

ENERGY RESEARCH & SOCIAL SCIENCE (2020)

Add to Collection
Review Chemistry, Multidisciplinary

Emerging triboelectric nanogenerators for ocean wave energy harvesting: state of the art and future perspectives

C. Rodrigues et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Add to Collection
Article Green & Sustainable Science & Technology

Effect of electromagnetic energy harvesting technology on safety and low power generation in sustainable transportation: a feasibility study

Mohammadreza Gholikhani et al.

INTERNATIONAL JOURNAL OF SUSTAINABLE ENGINEERING (2020)

Add to Collection
Article Thermodynamics

Renewable power integration: Experimental and simulation study to investigate the ability of integrating wave, solar and wind energies

M. Talaat et al.

ENERGY (2019)

Add to Collection
Review Energy & Fuels

Energy harvesting from pavements and roadways: A comprehensive review of technologies, materials, and challenges

Saifuddin Ahmad et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2019)

Add to Collection
Article Energy & Fuels

A multifunctional road-compatible piezoelectric energy harvester for autonomous driver-assist LED indicators with a self-monitoring system

Jae Yong Cho et al.

APPLIED ENERGY (2019)

Add to Collection
Article Telecommunications

Energy Efficiency Trade-Off Between Duty-Cycling and Wake-Up Radio Techniques in IoT Networks

Adam Kozlowski et al.

WIRELESS PERSONAL COMMUNICATIONS (2019)

Add to Collection
Article Energy & Fuels

Watts-level road-compatible piezoelectric energy harvester for a self-powered temperature monitoring system on an actual roadway

Wonseop Hwang et al.

APPLIED ENERGY (2019)

Add to Collection
Article Engineering, Electrical & Electronic

A Fully Integrated Split-Electrode SSHC Rectifier for Piezoelectric Energy Harvesting

Sijun Du et al.

IEEE JOURNAL OF SOLID-STATE CIRCUITS (2019)

Add to Collection
Article Thermodynamics

A portable renewable wind energy harvesting system integrated S-rotor and H-rotor for self-powered applications in high-speed railway tunnels

Hongye Pan et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

Add to Collection
Article Green & Sustainable Science & Technology

Towards feasibility of photovoltaic road for urban traffic-solar energy estimation using street view image

Ziyu Liu et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Add to Collection
Article Green & Sustainable Science & Technology

Electromagnetic Energy Harvesting Technology: Key to Sustainability in Transportation Systems

Mohammadreza Gholikhani et al.

SUSTAINABILITY (2019)

Add to Collection
Review Engineering, Mechanical

Fundamental theories and basic principles of triboelectric effect: A review

Shuaihang Pan et al.

FRICTION (2019)

Add to Collection
Review Construction & Building Technology

A review on thermoelectric energy harvesting from asphalt pavement: Configuration, performance and future

Xingyi Zhu et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection
Proceedings Paper Engineering, Civil

Performance Exploration of A Radially Layered Cymbal Piezoelectric Energy Harvester under Road Traffic Induced Low Frequency Vibration

Xinnan Liu et al.

2018 THE 6TH INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING, MATERIALS SCIENCE AND CIVIL ENGINEERING (2019)

Add to Collection
Proceedings Paper Energy & Fuels

Energy Harvesting from Moving Vehicles on Highways

Fubing Han et al.

2019 IEEE ENERGY CONVERSION CONGRESS AND EXPOSITION (ECCE) (2019)

Add to Collection
Article Engineering, Electrical & Electronic

Experimental Vibration Analysis of a Small Scale Vertical Wind Energy System for Residential Use

Francesco Castellani et al.

MACHINES (2019)

Add to Collection
Review Chemistry, Multidisciplinary

Energy Harvesting Research: The Road from Single Source to Multisource

Yang Bai et al.

ADVANCED MATERIALS (2018)

Add to Collection
Article Chemistry, Multidisciplinary

On the Electron-Transfer Mechanism in the Contact-Electrification Effect

Cheng Xu et al.

ADVANCED MATERIALS (2018)

Add to Collection
Article Energy & Fuels

Piezoelectric polymer-based roadway energy harvesting via displacement amplification module

Youn-Hwan Shin et al.

APPLIED ENERGY (2018)

Add to Collection
Review Energy & Fuels

Energy harvesting technologies in roadway and bridge for different applications - A comprehensive review

Hao Wang et al.

APPLIED ENERGY (2018)

Add to Collection
Article Construction & Building Technology

Design and experiment of thermoelectric asphalt pavements with power-generation and temperature-reduction functions

Wei Jiang et al.

ENERGY AND BUILDINGS (2018)

Add to Collection
Article Thermodynamics

A multimodal hybrid energy harvester based on piezoelectric-electromagnetic mechanisms for low-frequency ambient vibrations

R. M. Toyabur et al.

ENERGY CONVERSION AND MANAGEMENT (2018)

Add to Collection
Article Energy & Fuels

Road Pavement Energy-Harvesting Device to Convert Vehicles' Mechanical Energy into Electrical Energy

Francisco Duarte et al.

JOURNAL OF ENERGY ENGINEERING (2018)

Add to Collection
Article

New System to Harvest Road Energy Using Piezoelectric Polymers

Chouaib Ennawaoui et al.

Sensor Letters (2018)

Add to Collection
Article Energy & Fuels

Road Pavement Energy-Harvesting Device to Convert Vehicles' Mechanical Energy into Electrical Energy

Francisco Duarte et al.

JOURNAL OF ENERGY ENGINEERING (2018)

Add to Collection
Article Chemistry, Analytical

An Adaptable Interface Conditioning Circuit Based on Triboelectric Nanogenerators for Self-Powered Sensors

Yongshan Hu et al.

MICROMACHINES (2018)

Add to Collection
Article Chemistry, Physical

Transparent-flexible-multimodal triboelectric nanogenerators for mechanical energy harvesting and self-powered sensor applications

Qitao Zhou et al.

NANO ENERGY (2018)

Add to Collection
Article Computer Science, Information Systems

Thermal Energy Harvesting WSNs Node for Temperature Monitoring in IIoT

Liqun Hou et al.

IEEE ACCESS (2018)

Add to Collection
Article Physics, Multidisciplinary

A Bending-Type Piezoelectric Energy Harvester with a Displacement-Amplifying Mechanism for Smart Highways

Jung Hwan Ahn et al.

JOURNAL OF THE KOREAN PHYSICAL SOCIETY (2018)

Add to Collection
Review Chemistry, Physical

A Review on Low-Grade Thermal Energy Harvesting: Materials, Methods and Devices

Ravi Anant Kishore et al.

MATERIALS (2018)

Add to Collection
Review Materials Science, Multidisciplinary

An overview of lead-free piezoelectric materials and devices

Huige Wei et al.

JOURNAL OF MATERIALS CHEMISTRY C (2018)

Add to Collection
Proceedings Paper Physics, Condensed Matter

Effect of Aging on the Piezoelectric Properties of Sol-gel derived Lead-free BCZT Ceramics

E. Chandrakala et al.

62ND DAE SOLID STATE PHYSICS SYMPOSIUM (2018)

Add to Collection
Article Chemistry, Analytical

ePave: A Self-Powered Wireless Sensor for Smart and Autonomous Pavement

Jian Xiao et al.

SENSORS (2017)

Add to Collection
Article Chemistry, Multidisciplinary

Effect of the relative permittivity of oxides on the performance of triboelectric nanogenerators

Yeon Joo Kim et al.

RSC ADVANCES (2017)

Add to Collection
Article Energy & Fuels

Design, modelling and practical tests on a high-voltage kinetic energy harvesting (EH) system for a renewable road tunnel based on linear alternators

Zutao Zhang et al.

APPLIED ENERGY (2016)

Add to Collection
Article Automation & Control Systems

Effect of Temperature and Pressure Variations on the Resonant Frequency of Piezoelectric Material

Vaishali Upadhye et al.

MEASUREMENT & CONTROL (2016)

Add to Collection
Article Instruments & Instrumentation

Wind-driven pyroelectric energy harvesting device

Mengying Xie et al.

SMART MATERIALS AND STRUCTURES (2016)

Add to Collection
Article Engineering, Multidisciplinary

Software solution implemented on hardware system to manage and drive multiple bi-axial solar trackers by PC in photovoltaic solar plants

P. Visconti et al.

MEASUREMENT (2015)

Add to Collection
Article Chemistry, Physical

Recent progress in piezoelectric nanogenerators as a sustainable power source in self-powered systems and active sensors

Youfan Hu et al.

NANO ENERGY (2015)

Add to Collection
Article Physics, Multidisciplinary

Broadband energy harvesting from coherence resonance of a piezoelectric bistable system and its experimental validation

Lan Chun-Bo et al.

ACTA PHYSICA SINICA (2015)

Add to Collection
Article Thermodynamics

Design and Motion Modeling of an Electromagnetic Hydraulic Power Hump Harvester

Hatem Hadi Obeid et al.

ADVANCES IN MECHANICAL ENGINEERING (2014)

Add to Collection
Article Energy & Fuels

Developing a mechanical roadway system for waste energy capture of vehicles and electric generation

Chen-Ching Ting et al.

APPLIED ENERGY (2012)

Add to Collection
Article Engineering, Electrical & Electronic

Corrugated aluminum nitride energy harvesters for high energy conversion effectiveness

Ting-Ta Yen et al.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2011)

Add to Collection
Article Engineering, Electrical & Electronic

An Efficient Piezoelectric Energy Harvesting Interface Circuit Using a Bias-Flip Rectifier and Shared Inductor

Yogesh K. Ramadass et al.

IEEE JOURNAL OF SOLID-STATE CIRCUITS (2010)

Add to Collection
Article Engineering, Biomedical

A 2-μm BiCMOS Rectifier-Free AC-DC Piezoelectric Energy Harvester-Charger IC

Dongwon Kwon et al.

IEEE TRANSACTIONS ON BIOMEDICAL CIRCUITS AND SYSTEMS (2010)

Add to Collection
Article Green & Sustainable Science & Technology

Energy and exergy efficiency comparison of horizontal and vertical axis wind turbines

K. Pope et al.

RENEWABLE ENERGY (2010)

Add to Collection
Article Computer Science, Information Systems

A study of low level vibrations as a power source for wireless sensor nodes

S Roundy et al.

COMPUTER COMMUNICATIONS (2003)

Add to Collection
Webinars Posters Questions Hubs Funding Journals Papers Connect Collections Reviewers About Us FAQs Mobile App Privacy Policy Terms of Use
© Peeref 2019-2024. All rights reserved.