4.6 Article

A comparative study of different sol-gel coatings for sealing the plasma electrolytic oxidation (PEO) layer on AA2024 alloy

Related references

Note: Only part of the references are listed.
Article Biochemistry & Molecular Biology

Stachys byzantina extract: A green biocompatible molecules source for graphene skeletons generation on the carbon steel for superior corrosion mitigation

Parisa Molaeipour et al.

Summary: The study demonstrated the effectiveness of using Stachys byzantina (SB) extract and divalent zinc (II) cations to create a highly durable corrosion protective film on metal surfaces. Various tests and surface analysis methods confirmed the excellent synergistic corrosion inhibition behavior and protective effects on the metal surface.

BIOELECTROCHEMISTRY (2022)

Article Materials Science, Coatings & Films

Corrosion inhibition of Ti6Al4V alloy by a protective plasma electrolytic oxidation coating modified with boron carbide nanoparticles

Parisa Molaeipour et al.

Summary: Plasma electrolytic oxidation (PEO) is a cost-effective and versatile technique to achieve protective oxide coatings in light metals. In this study, composite coatings containing B4C nanoparticles were successfully produced using PEO technique, and the influence of nanoparticles on the coatings' properties and incorporation mechanism were investigated.

SURFACE & COATINGS TECHNOLOGY (2022)

Article Electrochemistry

Correlation between the transient variation in positive/negative pulse voltages and the growth of PEO coating on 7075 aluminum alloy

Mingyu Zhu et al.

Summary: In this study, the effect of negative pulse on the compactness of PEO coating was analyzed by establishing an equivalent circuit model. The results showed that negative pulse can improve the compactness of the coating and reduce energy consumption.

ELECTROCHIMICA ACTA (2022)

Article Materials Science, Coatings & Films

Improvement of the corrosion performance of AA2024 alloy by a duplex PEO/clay modified sol-gel nanocomposite coating

Sajjad Akbarzadeh et al.

Summary: Adding montmorillonite nanoparticles into the silane coating has a significant impact on improving the corrosion resistance of AA2024. The montmorillonite nanoparticles enhance the barrier performance and improve the grafting effect of the coating through chemical interaction with the silane layer.

SURFACE & COATINGS TECHNOLOGY (2022)

Article Materials Science, Multidisciplinary

Corrosion and tribocorrosion protection of novel PEO coatings on a secondary cast Al-Si alloy: Influence of polishing and sol-gel sealing

Patricia Fernandez-Lopez et al.

Summary: This study found that the protective performance of PEO coatings on components with high requirements in corrosive environments can be improved through two post-treatments: polishing and sealing with a sol-gel layer.

CORROSION SCIENCE (2022)

Article Materials Science, Multidisciplinary

Superior corrosion protection and adhesion strength of epoxy coating applied on AZ31 magnesium alloy pre-treated by PEO/Silane with inorganic and organic corrosion inhibitors

M. Toorani et al.

Summary: The study found that adding 8-Hydroxyquinoline (8-HQ) organic inhibitor to the PEO/Silane/Epoxy coating system provides optimal corrosion protection properties. The formation of Ce(OH)(3) in the PEO coating structure and the complex chelate of Mg(HQ)(2) in the silane layer lead to the active corrosion protection properties in the coating system.

CORROSION SCIENCE (2021)

Article Chemistry, Physical

Composite coatings formed on Ti by PEO and fluoropolymer treatment

D. V. Mashtalyar et al.

Summary: The study developed a method for restoring protective coating of pure titanium, damaged due to long-term operation, through plasma electrolytic oxidation and subsequent polymer treatment. The research showed that composite coatings with polytetrafluoroethylene have higher corrosion resistance, wear resistance, and hydrophobicity, compared to thermal coatings.

APPLIED SURFACE SCIENCE (2021)

Article Materials Science, Multidisciplinary

Comparison of Biocompatible Coatings Produced by Plasma Electrolytic Oxidation on cp-Ti and Ti-Zr-Nb Superelastic Alloy

Ruzil Farrakhov et al.

Summary: The study compares plasma electrolytic oxidation (PEO) coatings on commercially pure titanium and a novel superelastic alloy Ti-18Zr-15Nb (at. %) for implant applications. Results show that the PEO coating on Ti-18Zr-15Nb alloy exhibits higher thickness, porosity, and roughness compared to the coating on commercially pure titanium, providing better corrosion protection.

COATINGS (2021)

Article Materials Science, Coatings & Films

Improved in-vitro corrosion performance of titanium using a duplex system of plasma electrolytic oxidation and graphene oxide incorporated silane coatings

Behnaz Hamrahi et al.

Summary: In this study, biocompatible sealants were prepared by depositing pure and graphene oxide (GO) incorporated silane layers on plasma electrolytic oxidation coated titanium using the sol-gel method. The corrosion protection performance of these sealants was investigated during a 14-day in-vitro immersion study. The results showed that the GO incorporated silane layer exhibited better stability and protective performance compared to the pure silane layer.

SURFACE & COATINGS TECHNOLOGY (2021)

Article Materials Science, Coatings & Films

Improvement of wear and corrosion protection of PEO on AA2024 via sol-gel sealing

Luciane Sopchenski et al.

Summary: In this study, a hybrid sol-gel was successfully used to seal the porosity of PEO coatings, improving corrosion resistance and reducing wear rate. The sol-gel filling effectively changed the wettability of the coatings, showing promising results in enhancing the protective properties of light metals.

SURFACE & COATINGS TECHNOLOGY (2021)

Article Materials Science, Ceramics

Integrated corrosion-resistant system for AZ31B Mg alloy via plasma electrolytic oxidation (PEO) and sol-gel processes

Emilia Merino et al.

Summary: An integrated system combining anodizing and hybrid SiO2 sol-gel coating deposition was developed to improve the corrosion resistance of AZ31B Mg alloy. Optimization of anodizing conditions and sol preparation effectively enhanced the corrosion performance of the alloy.

INTERNATIONAL JOURNAL OF APPLIED GLASS SCIENCE (2021)

Proceedings Paper Materials Science, Multidisciplinary

Effect of physical vapour deposition coated and uncoated carbide tools in turning aluminium alloy-AA6063

G. Mohana Rao et al.

Summary: The study focuses on optimizing and comparing tool materials and cutting parameters during the machining of aluminum alloy AA6063, finding that PVD coated carbide inserts outperform uncoated carbide inserts in terms of surface quality, power, and temperature.

MATERIALS TODAY-PROCEEDINGS (2021)

Article Chemistry, Applied

Epoxy-based smart coating with self-repairing polyurea-formaldehyde microcapsules for anticorrosion protection of aluminum alloy AA2024

Chigoziri N. Njoku et al.

JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH (2020)

Article Materials Science, Multidisciplinary

Sealing of PEO coated AZ91magnesium alloy using solutions containing neodymium

Luca Pezzato et al.

CORROSION SCIENCE (2020)

Article Materials Science, Multidisciplinary

Effective PEO/Silane pretreatment of epoxy coating applied on AZ31B Mg alloy for corrosion protection

M. Toorani et al.

CORROSION SCIENCE (2020)

Article Polymer Science

Chitosan-GPTMS-Silica Hybrid Mesoporous Aerogels for Bone Tissue Engineering

Maria V. Reyes-Peces et al.

POLYMERS (2020)

Article Materials Science, Coatings & Films

Flash-PEO coatings loaded with corrosion inhibitors on AA2024

R. del Olmo et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Review Materials Science, Coatings & Films

A Comprehensive Review of Corrosion Resistance of Thermally-Sprayed and Thermally-Diffused Protective Coatings on Steel Structures

Sahar A. Galedari et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2019)

Article Materials Science, Multidisciplinary

Corrosion and mechanical properties of plasma electrolytic oxidation-coated AZ80 magnesium alloy

Luca Pezzato et al.

MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2019)

Article Materials Science, Coatings & Films

Plasma Electrolytic Oxidation (PEO) as pre-treatment for sol-gel coating on aluminum and magnesium alloys

Luca Pezzato et al.

SURFACE & COATINGS TECHNOLOGY (2019)

Article Materials Science, Multidisciplinary

Nucleation and growth mechanisms of trivalent chromium conversion coatings on 2024-T3 aluminium alloy

Xavier Verdalet-Guardiola et al.

CORROSION SCIENCE (2019)

Article Chemistry, Physical

Effects of Si phase refinement on the plasma electrolytic oxidation of eutectic Al-Si alloy

Kang Li et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Article Materials Science, Coatings & Films

Surface modification of Al by high-intensity low-energy Ti-ion implantation: Microstructure, mechanical and tribological properties

A. I. Ryabchikov et al.

SURFACE & COATINGS TECHNOLOGY (2019)

Article Materials Science, Coatings & Films

Sequential run of the PEO process with various pulsed bipolar current waveforms

V. Ntomprougkidis et al.

SURFACE & COATINGS TECHNOLOGY (2019)

Article Engineering, Multidisciplinary

Fabrication of a highly protective silane composite coating with limited water uptake utilizing functionalized carbon nano-tubes

Sajjad Akbarzadeh et al.

COMPOSITES PART B-ENGINEERING (2019)

Article Engineering, Chemical

Fabrication of Highly Effective Polyaniline Grafted Carbon Nanotubes To Induce Active Protective Functioning in a Silane Coating

Sajjad Akbarzadeh et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)

Article Nanoscience & Nanotechnology

Enhancement in mechanical properties of selectively laser-melted AlSi10Mg aluminum alloys by T6-like heat treatment

L. F. Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Article Materials Science, Multidisciplinary

Localized corrosion in AA2024-T351 aluminium alloy: Transition from intergranular corrosion to crystallographic pitting

Xinxin Zhang et al.

MATERIALS CHARACTERIZATION (2017)

Article Metallurgy & Metallurgical Engineering

Wear and corrosion resistant coatings on surface of cast A356 aluminum alloy by plasma electrolytic oxidation in moderately concentrated aluminate electrolytes

Huan-jun Xie et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2017)

Article Chemistry, Physical

The determination of the optimum hydrolysis time for silane films deposition

Ioana-Alina Ciobotaru et al.

APPLIED SURFACE SCIENCE (2016)

Article Polymer Science

Influence of Textile Structure and Silica Based Finishing on Thermal Insulation Properties of Cotton Fabrics

G. Rosace et al.

INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2016)

Article Chemistry, Physical

Progress of porous silicon APTES-functionalization by FTIR investigations

N. Majoul et al.

APPLIED SURFACE SCIENCE (2015)

Article Electrochemistry

Contribution of Surface Distributions to Constant-Phase-Element (CPE) Behavior: 1. Influence of Roughness

Christopher L. Alexander et al.

ELECTROCHIMICA ACTA (2015)

Article Materials Science, Ceramics

Hybrid sol-gel coating agents based on zirconium(IV) propoxide and epoxysilane

Ingrid Milosev et al.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2015)

Article Materials Science, Coatings & Films

Characterization and wear behaviour of PEO coatings on 6082-T6 aluminium alloy with incorporated α-Al2O3 particles

R. Arrabal et al.

SURFACE & COATINGS TECHNOLOGY (2015)

Article Materials Science, Ceramics

Study of a sol-gel process in the preparation of hybrid coatings for corrosion protection using FTIR and 1H NMR methods

Peter Rodic et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2014)

Article Materials Science, Ceramics

A hybrid organic-inorganic sol-gel coating for protecting aluminium alloy 7075-T6 against corrosion in Harrison's solution

Peter Rodic et al.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2014)

Article Materials Science, Coatings & Films

Effect of duty cycle and applied current frequency on plasma electrolytic oxidation (PEO) coating growth behavior

Vahid Dehnavi et al.

SURFACE & COATINGS TECHNOLOGY (2013)

Article Materials Science, Ceramics

Sol-gel derived hybrid coatings as an environment friendly surface treatment for corrosion protection of metals and their alloys

Dinesh Balgude et al.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2012)

Article Materials Science, Ceramics

Influence of synthesis conditions on the cross-link architecture of silsesquioxanes prepared by in situ water production route

Valeria Tagliazucca et al.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2011)

Article Materials Science, Multidisciplinary

Temperature dependent microstructure of MTES modified hydrophobic silica aerogels

Sheng Cui et al.

MATERIALS LETTERS (2011)

Article Materials Science, Multidisciplinary

Preparation and characterization of APTES films on modification titanium by SAMs

Guoxin Tan et al.

THIN SOLID FILMS (2011)

Article Biochemistry & Molecular Biology

Formation, topography and reactivity of Candida antarctica lipase B immobilized on silicon surface

Nemanja Miletic et al.

BIOCATALYSIS AND BIOTRANSFORMATION (2010)

Article Chemistry, Physical

Formation, structure, and reactivity of amino-terminated organic films on silicon substrates

Joonyeong Kim et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2009)

Article Chemistry, Applied

Studies on rheological properties of methyltriethoxysilane (MTES) based flexible superhydrophobic silica aerogels

Digambar Y. Nadargi et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2009)

Review Chemistry, Applied

Effect of organic chelates on the performance of hybrid sol-gel coated AA 2024-T3 aluminium alloys

P. C. Rajath Varma et al.

PROGRESS IN ORGANIC COATINGS (2009)

Review Chemistry, Applied

Sol-gel coatings on metals for corrosion protection

Duhua Wang et al.

PROGRESS IN ORGANIC COATINGS (2009)

Article Materials Science, Coatings & Films

Improved corrosion resistance of AA2024 alloys through hybrid organic-inorganic sol-gel coatings produced from sols with controlled polymerisation

N. C. Rosero-Navarro et al.

SURFACE & COATINGS TECHNOLOGY (2009)

Review Chemistry, Applied

Inorganic-organic hybrid materials with zirconium oxoclusters as protective coatings on aluminium alloys

Fabrizio Girardi et al.

PROGRESS IN ORGANIC COATINGS (2008)

Article Chemistry, Applied

Integrated electrochemical approach for the investigation of silane pre-treatments for painting copper

F. Deflorian et al.

PROGRESS IN ORGANIC COATINGS (2008)

Article Engineering, Industrial

Sol-gel coatings for high precision optical molds

A. Mehner et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2006)

Article Materials Science, Ceramics

Hybrid organic-inorganic sol-gel materials based on epoxy-amine systems

P Innocenzi et al.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2005)

Article Materials Science, Ceramics

Spectroscopic characterization of sol-gel organo-siloxane materials synthesized from aliphatic and aromatic alcoxysilanes

M Oubaha et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2005)

Article Materials Science, Multidisciplinary

An electrochemical study of the delamination of polymer coatings on galvanized steel

K Ogle et al.

CORROSION SCIENCE (2005)

Article Chemistry, Multidisciplinary

Stabilization and destabilization of zirconium propoxide precursors by acetylacetone

GI Spijksma et al.

CHEMICAL COMMUNICATIONS (2004)

Article Electrochemistry

Anodic processes in plasma electrolytic oxidation of aluminium in alkaline solutions

LO Snizhko et al.

ELECTROCHIMICA ACTA (2004)

Article Materials Science, Multidisciplinary

Preparation of titanium(IV) oxide thin film photocatalyst by sol-gel dip coating

RS Sonawane et al.

MATERIALS CHEMISTRY AND PHYSICS (2003)

Review Chemistry, Applied

Overcoming oxygen inhibition in UV-curing of acrylate coatings by carbon dioxide inerting, Part I

K Studer et al.

PROGRESS IN ORGANIC COATINGS (2003)

Article Electrochemistry

Dealloying and corrosion of Al alloy 2024-T3

MB Vukmirovic et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2002)

Article Materials Science, Ceramics

Physical properties of sol-gel coatings

JD Mackenzie et al.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2000)

Article Electrochemistry

Dealloying of Al2CuMg in alkaline media

N Dimitrov et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2000)