4.6 Article

Investigation of an electrode reversal method and degradation recovery mechanisms of PEM fuel cell

Related references

Note: Only part of the references are listed.
Article Chemistry, Physical

Quantification on degradation mechanisms of polymer exchange membrane fuel cell cathode catalyst layers during bus and stationary durability test protocols

Jiajun Wang et al.

Summary: The study investigates the degradation mechanisms of proton exchange membrane fuel cells through simulating bus and stationary protocols, employing characterization techniques and quantitative methods. Results show that particles growth and Pt dissolution are the main factors contributing to degradation under bus conditions, while ionomer/catalyst interface loss is predominant under stationary conditions.

JOURNAL OF POWER SOURCES (2022)

Article Chemistry, Physical

Degradation behavior of proton exchange membrane fuel cells under hydrogen starvation in freezing conditions

Tao Wei et al.

Summary: Proton exchange membrane fuel cells experience cell reversal due to hydrogen starvation, exacerbated by hydrogen channel blockage after ice formation. The study reveals that at sub-zero temperatures, the reversal time decreases, likely due to reduced water diffusion capacity in the membrane caused by freezing conditions.

JOURNAL OF POWER SOURCES (2022)

Article Thermodynamics

Investigation of the reversible performance degradation mechanism of the PEMFC stack during long-term durability test

Tiankuo Chu et al.

Summary: This paper reports on a 2500-hour durability test of a 3-cell PEMFC stack under dynamic conditions and different recovery procedures. The primary cause of stack performance degradation was found to be reversible oxidation of platinum (Pt). By optimizing operating parameters and using combined recovery procedures, the performance degradation could be mitigated, significantly extending the service life of the PEMFC stack.

ENERGY (2022)

Article Energy & Fuels

Comparison of different performance recovery procedures for polymer electrolyte membrane fuel cells

Qian Zhang et al.

Summary: This study analyzed the impact of three recovery procedures on the performance of polymer electrolyte membrane fuel cells. The research found that these procedures can effectively recover performance losses at high current densities, but show significant differences at lower current densities. The JRC protocol recovers kinetic losses by reducing the cathode potential and fuel cell temperature, while the DOE protocol has relatively poorer recovery effects.

APPLIED ENERGY (2021)

Review Chemistry, Physical

Review on mechanisms and recovery procedures for reversible performance losses in polymer electrolyte membrane fuel cells

Jens Mitzel et al.

Summary: The paper provides a detailed overview of reversible performance losses mechanisms, general requirements for recovery, and specific recovery procedures. It aims to present general recommendations for suitable recovery strategies and procedures for reliable testing and improved efficiency of operating systems.

JOURNAL OF POWER SOURCES (2021)

Review Chemistry, Physical

Carbon corrosion mechanism and mitigation strategies in a proton exchange membrane fuel cell (PEMFC): A review

Junjie Zhao et al.

Summary: This article provides an overview of the causes and consequences of carbon corrosion mechanism, along with mitigation strategies for various operating conditions. It discusses the seriousness of carbon corrosion during startup and shutdown processes, and the importance of water management in accelerating corrosion. Additionally, new support materials have been developed to improve the durability of catalyst support in PEMFCs.

JOURNAL OF POWER SOURCES (2021)

Review Thermodynamics

Degradation mechanisms of proton exchange membrane fuel cell under typical automotive operating conditions

Peng Ren et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2020)

Article Electrochemistry

Effects of PEMFC Operational History under Dry/Wet Conditions on Additional Voltage Losses due to Ionomer Migration

Fengmin Du et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Review Chemistry, Multidisciplinary

The role of hydrogen and fuel cells in the global energy system

Iain Staffell et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Review Chemistry, Physical

Stresses and their impacts on proton exchange membrane fuel cells: A review

Ahmed Mohmed Dafalla et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)

Article Chemistry, Physical

Measurement of protonic resistance of catalyst layers as a tool for degradation monitoring

T. Gaumont et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Article Chemistry, Physical

Recovery mechanisms in proton exchange membrane fuel cells after accelerated stress tests

Xu Zhang et al.

JOURNAL OF POWER SOURCES (2015)

Review Chemistry, Multidisciplinary

Sintering of Catalytic Nanoparticles: Particle Migration or Ostwald Ripening?

Thomas W. Hansen et al.

ACCOUNTS OF CHEMICAL RESEARCH (2013)

Article Electrochemistry

Microscopic Investigation of Platinum Deposition in PEMFC Cross-Sections Using AFM and SEM

Stefan Helmly et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)

Article Electrochemistry

Impact of Platinum Loading and Catalyst Layer Structure on PEMFC Performance

Jon P. Owejan et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)

Article Electrochemistry

Recoverable Performance Loss Due to Membrane Chemical Degradation in PEM Fuel Cells

Jingxin Zhang et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2012)

Article Electrochemistry

Electrochemical stability of carbon nanofibers in proton exchange membrane fuel cells

Garbine Alvarez et al.

ELECTROCHIMICA ACTA (2011)

Article Chemistry, Physical

3D Imaging of Catalyst Support Corrosion in Polymer Electrolyte Fuel Cells

Hendrik Schulenburg et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2011)

Article Chemistry, Physical

Use of mechanical tests to predict durability of polymer fuel cell membranes under humidity cycling

T. T. Aindow et al.

JOURNAL OF POWER SOURCES (2011)

Article Chemistry, Physical

Deactivation of Pt/VC proton exchange membrane fuel cell cathodes by SO2, H2S and COS

Benjamin D. Gould et al.

JOURNAL OF POWER SOURCES (2009)

Article Electrochemistry

Effect of SO2 on the Performance of the Cathode of a PEM Fuel Cell at 0.5-0.7 V

O. A. Baturina et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2009)

Article Chemistry, Physical

Reversible and irreversible degradation in fuel cells during Open Circuit Voltage durability testing

Sumit Kundu et al.

JOURNAL OF POWER SOURCES (2008)

Article Chemistry, Physical

Voltage instability in a simulated fuel cell stack correlated to cathode water accumulation

J. P. Owejan et al.

JOURNAL OF POWER SOURCES (2007)

Article Chemistry, Physical

Effect of carbon black support corrosion on the durability of Pt/C catalyst

Jiajun Wang et al.

JOURNAL OF POWER SOURCES (2007)

Article Chemistry, Physical

Site-specific vs specific adsorption of anions on Pt and Pt-based alloys

Maggie Teliska et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2007)

Article Chemistry, Physical

Diagnostic tools for liquid water in PEM fuel cells

E Stumper et al.

JOURNAL OF POWER SOURCES (2005)

Article Chemistry, Physical

Adsorption of bisulfate and sulfate anions on a Pt(111) electrode

A Kolics et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2001)