☆ 4.6 Article

Two-step carbon coating onto nickel-rich LiNi0.8Co0.1Mn0.1O2 cathode reduces adverse phase transition and enhances electrochemical performance

ELECTROCHIMICA ACTA (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Reducing intrinsic drawbacks of Ni-rich layered oxide with a multifunctional materials dry-coating strategy

Nichakarn Anansuksawat et al.

Summary: In this study, a multifunctional dry coating strategy was introduced on LiNi0.8Mn0.1Co0.1O2 (NMC811) with a thickness of approximately 100 nm at 1 wt%. The coating included high chemical stable Al2O3 (0.33 wt%) to reduce parasitic reactions, high electrical carbon black (0.33 wt%) to reduce internal charge transfer resistance, and high ionic conductive Li7La3Zr2O12 (0.33 wt%) to enhance Li+ diffusion. The coated NMC811 exhibited improved stability, achieving 1000 cycles with 80% capacity retention, compared to the pristine NMC811 with only 39% capacity retention. It also demonstrated a two-fold specific capacity at a high C-rate (2.0C) and excellent safety based on the UN38.3 standard.

JOURNAL OF POWER SOURCES (2023)

Add to Collection

Article Engineering, Environmental

Regulating electrode-electrolyte interphases and eliminating hydrogen fluoride to boost electrochemical performances of Li/NCM811 batteries

Sen Jiang et al.

Summary: This study introduces a novel multi-functional electrolyte additive, 1-(trimethylsilyloxy) cyclohexene (TMSCH), to improve the cathode/solid-electrolyte interphase (CEI/SEI) of Li metal batteries and reduce the generation of harmful substances. The feasibility and effectiveness of this strategy are demonstrated through theoretical calculations and experimental measurements. The results show that the addition of TMSCH can enhance the capacity retention and improve the electrochemical performance of Li metal batteries.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection

Article Chemistry, Physical

Outstanding enhancements in stability of LiNi0.8Mn0.1Co0.1O2 cathode by AlPO4/ACB double coating: Insights into surface structure and chemistry

Ting Wang et al.

Summary: The AlPO4/acetylene carbon black double coating greatly enhances the crystallinity and lattice bonded oxygen near the surface of LiNi0.8Mn0.1Co0.1O2, leading to decreased Li/Ni disordering. The additional carbon coating effectively isolates moisture and CO2 in air, reducing the formation of Li2CO3 on the surface. Consequently, the AlPO4/acetylene carbon black double coated LiNi0.8Mn0.1Co0.1O2 exhibits greatly enhanced charge/discharge stability at different temperatures.

APPLIED SURFACE SCIENCE (2022)

Add to Collection

Article Chemistry, Physical

Cycle-Induced Interfacial Degradation and Transition-Metal Cross-Over in LiNi0.8Mn0.1Co0.1O2-Graphite Cells

Erik Bjorklund et al.

Summary: Ni-rich lithium nickel manganese cobalt (NMC) oxide cathode materials suffer from accelerated degradation and capacity losses over cycles. The degradation is associated with the reduction of electrolyte on the graphite anode, thickening of the solid-electrolyte interphase (SET), and transition metal dissolution, which lead to increased cathode potential and limitations in NMC capacity. The observed changes in anode and cathode surface layers provide insights into the degradation mechanisms and inform strategies for improving the cycle lifetime of Ni-rich NMCs.

CHEMISTRY OF MATERIALS (2022)

Add to Collection

Article Materials Science, Composites

Coating Ni-rich cathode with an amorphous carbon for improving the stability and electrochemical performance

Jianneng Liang et al.

Summary: By coating Ni-rich cathodes with an amorphous carbon layer, the performance of NMC811 batteries can be greatly improved, addressing the issues of capacity fading and voltage dropping. The cracking problem, both intergranular and intragranular, is alleviated, and a stable CEI layer is formed at the electrode/electrolyte interface.

COMPOSITES COMMUNICATIONS (2022)

Add to Collection

Article Engineering, Environmental

Improved high-voltage performance of LiNi0.87Co0.1Al0.03O2 by Li+- conductor coating

Sidra Jamil et al.

Summary: The Ni-rich layered oxide cathode material, LiNi0.87Co0.1Al0.03O2, modified with amorphous Li+-ion conductor Li2O-BPO4 coating, shows improved cycling stability and rate capability, making it a promising candidate for high-voltage applications in lithium ion batteries.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Dual-Modified Compact Layer and Superficial Ti Doping for Reinforced Structural Integrity and Thermal Stability of Ni-Rich Cathodes

Wen Yang et al.

Summary: A highly stable hybrid surface architecture is designed to enhance the structural stability of nickel-rich layered oxides, effectively inhibiting capacity fading. The modification strategy involves surface titanium doping and TiO2&Li2TiO3 hybrid coating, which collaboratively achieve high capacity retention and low voltage decay after a high number of cycles, boosting the commercial potential of the material.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Engineering, Environmental

Dual-site lattice modification regulated cationic ordering for Ni-rich cathode towards boosted structural integrity and cycle stability

Chunliu Xu et al.

Summary: The dual-site doping of Zn2+ in Ni-rich cathode materials successfully enhances the cationic ordering and suppresses cationic mixing, leading to high capacity and stable cyclability in lithium-ion batteries.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Physics, Applied

Raman spectroscopy for carbon nanotube applications

A. Jorio et al.

Summary: This tutorial review presents the use of Raman spectroscopy in carbon nanotube applications, discussing how to utilize Raman spectral features for controlling and characterizing nanotube properties, and introducing advanced techniques to enhance the relevance of Raman spectroscopy in this field.

JOURNAL OF APPLIED PHYSICS (2021)

Add to Collection

Article Spectroscopy

Raman maps reveal heterogeneous hydrogenation on carbon materials

Bruno G. daFonseca et al.

Summary: This study applies Raman spectroscopy to investigate heterogeneity in the composition of carbon materials obtained electrochemically, using Raman maps and histograms to describe sample synthesis and revealing important compositional variations hidden by average spectra. The maps show heterogeneous hydrogenation in different areas of the carbon films, while histograms provide statistical relevance for classifying different types of carbon materials.

JOURNAL OF RAMAN SPECTROSCOPY (2021)

Add to Collection

Article Engineering, Environmental

Highly conductive 3D structural carbon network-encapsulated Ni-rich LiNi0.8Co0.1Mn0.1O2 as depolarized and passivated cathode for lithium-ion batteries

Jeonguk Hwang et al.

Summary: In this study, a highly conductive and ethanol-dispersive 3D carbon network was successfully applied to improve the electrochemical performance of Ni-rich NCM, enhancing depolarization and achieving stable electrochemical reactions at high rates. The 3D carbon network layer also prevented electrical separation caused by micro-cracks, irreversible phase transitions, and side reactions with electrolytes, leading to a significant improvement in rate capability and cycle stability compared to bare NCM811.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Applied

Suppressing irreversible phase transition and enhancing electrochemical performance of Ni-rich layered cathode LiNi0.9Co0.05Mn0.05O2 by fluorine substitution

Qi-Qi Qiu et al.

Summary: The electrochemical performance of Ni-rich layered oxide can be significantly improved by appropriate F substitution, reducing cation mixing, stabilizing crystal structure, and enhancing Li ion transport kinetics. The newly developed LiNi0.9Co0.05Mn0.05O1.99F0.01 cathode exhibits high capacity and excellent cycle stability.

JOURNAL OF ENERGY CHEMISTRY (2021)

Add to Collection

Article Multidisciplinary Sciences

Transition metal-doped Ni-rich layered cathode materials for durable Li-ion batteries

H. Hohyun Sun et al.

Summary: This study investigates the effect of transition metal dopants on the properties of Ni-rich cathode active materials and finds that dopants with high oxidation states significantly improve the cycling stability and performance of Li-ion batteries. Physicochemical measurements reveal substantial differences in grain geometries and crystal lattice structures of various cathode materials, which correlate with the oxidation states of their dopants.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Multidisciplinary Sciences

Rational design of mechanically robust Ni-rich cathode materials via concentration gradient strategy

Tongchao Liu et al.

Summary: The study found that using concentration gradient design can successfully alleviate particle cracking issues in Ni-rich cathode materials without sacrificing electrode capacity. By investigating the effects of Co and Mn on the mechanical properties of Ni-rich materials, it is found that Co-enriched surface design helps suppress particle cracking formation, while Mn-enriched core limits internal expansion and improves structural integrity. The concentration gradient design also promotes morphological stability and cycling performances in Li metal coin cell configuration.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Enhancing the Electrochemical Performance and Structural Stability of Ni-Rich Layered Cathode Materials via Dual-Site Doping

Mihai Chu et al.

Summary: In this study, dual-site Nb doping on both lithium and transition-metal sites significantly improved the rate performance and structural stability of Ni-rich layered cathode material LiNi0.8Co0.1Mn0.1O2. The Nb-doped cathode exhibited a high capacity retention of 81% after 200 electrochemical cycles and demonstrated remarkable rate capability with a discharge capacity of 176 mAh.g(-1) at 10C rate. This dual-site doping approach could potentially serve as a universal modification strategy to enhance the electrochemical performance of other cathode materials.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Engineering, Environmental

High performance layered LiNi0.8Co0.07Fe0.03Mn0.1O2 cathode materials for Li-ion battery

Guojun Zha et al.

Summary: By partially substituting Co with Fe, a new cathode material (Fe3-NCM871) with significantly enhanced electrochemical performance was developed. This material showed higher initial capacity, rate capacity, and cycle stability compared to the conventional cathode material NCM811. Density functional theory calculations confirmed that the improved performance was due to reduced Ni/Li exchange content and linear Ni2+-O2--Fe3+ superexchange between layers.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Engineering, Chemical

Exposing microstructure evolution of Ni-Rich Ni-Co-Al hydroxide precursor

Lang Qiu et al.

Summary: This study systematically investigated the structural evolution of Ni-rich Ni-Co-Al hydroxide precursor under different synthesis conditions, revealing the impact of pH on ammonia concentration, particle size, composition, and space group of the precursor. The results provide significant guidance for the design of a precursor with a specific structure to improve cycle life of high-energy-density cathode materials.

CHEMICAL ENGINEERING SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Core-shell Ni-rich NMC-Nanocarbon cathode from scalable solvent-free mechanofusion for high-performance 18650 Li-ion batteries

Nutthaphon Phattharasupakun et al.

Summary: A surface coating approach using carbon nanosphere shell was introduced to improve the drawbacks of Ni-rich LiNi0.8Mn0.1Co0.1O2 (NMC811) cathode, showing higher Li utilization and better stability. The in operando XRD analysis revealed the smooth phase transition of NMC811cs, while the online Differential Electrochemical Mass Spectrometry demonstrated extended onset potential of CO2 and H-2 evolution. Overall, the NMC811cs prototype battery exhibited higher specific capacity, energy, and cycling stability compared to pristine NMC811.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Materials Science, Ceramics

Inhibited intracrystalline cracks and enhanced electrochemical properties of NCM811 cathode materials coated by EPS

Xinru Tan et al.

Summary: Coating NCM811 with EPS effectively suppressed micro-cracks in primary-like particles, resulting in excellent capacity retention and rate performance. This improvement can be attributed to the EPS stress buffer layer, suppressed oxygen vacancies, inhibited phase transition, and reduced volume change.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Dually-functionalized Ni-rich layered oxides for high-capacity lithium-ion batteries

Ji Won Kim et al.

Summary: In this study, a one-step surface modification method using a task-specific precursor, N,N,N,N-tetraethylsulfamide (NTESA), was proposed to improve the interfacial stability of Ni-rich NCM cathode materials. The NTESA-functionalized Ni-rich NCM cathode materials showed improved cycling retention after 100 cycles compared to non-functionalized materials. SEM, XPS, and EIS analyses suggested that electrolyte decomposition was suppressed and the dissolution of transition metal components was inhibited, leading to an overall improved electrochemical performance of the cell.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Direct Elimination of Detrimental Surface Phases Parasitic to LiNixCo1-xO2 (x=0.8 and 0.9) with Unique 3D Porous Structures during Synthesis

Xinghua Tan et al.

Summary: By using an expanded graphites template approach, detrimental surface phases were successfully eliminated during the synthesis of LiNi0.8Co0.2O2 and LiNi0.9Co0.1O2, leading to the formation of unique 3D porous structures. These samples exhibited excellent performance, far better than those synthesized using conventional sol-gel methods.

ADVANCED MATERIALS INTERFACES (2021)

Add to Collection

Article Chemistry, Physical

Revisiting the role of Zr doping in Ni-rich layered cathodes for lithium-ion batteries

Chul-Ho Jung et al.

Summary: The study successfully achieved electrochemically stabilized Ni-rich LiNi0.92Co0.04Mn0.04O2 through Zr doping, resulting in a 15% increase in capacity retention after 100 cycles. In-depth investigations revealed the critical role of Zr doping in lattice oxygen stability, which positively contributes to the cathode electrochemical reversibility.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Enhanced Surface Chemical and Structural Stability of Ni-Rich Cathode Materials by Synchronous Lithium-Ion Conductor Coating for Lithium-Ion Batteries

Ruicheng Qian et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Electrode Degradation in Lithium-Ion Batteries

Joshua P. Pender et al.

ACS NANO (2020)

Add to Collection

Article Chemistry, Physical

An encapsulation of nitrogen and sulphur dual-doped carbon over Li[Ni0.8Co0.1Mn0.1]O2 for lithium-ion battery applications

Murugan Nanthagopal et al.

APPLIED SURFACE SCIENCE (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Surface/Interface Structure Degradation of Ni-Rich Layered Oxide Cathodes toward Lithium-Ion Batteries: Fundamental Mechanisms and Remedying Strategies

Longwei Liang et al.

ADVANCED MATERIALS INTERFACES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Enhanced Electrochemical Performance of Ni-Rich Cathode Materials with Li1.3Al0.3Ti1.7(PO4)3 Coating

Xingyu Qu et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Annealing effects of TiO2 coating on cycling performance of Ni-rich cathode material LiNi0.8Co0.1Mn0.1O2 for lithium-ion battery

Shunyu Zhao et al.

MATERIALS LETTERS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Enhancing the Electrochemical Performance of LiNi0.70C0.15Mn0.15O2 Cathodes Using a Practical Solution-Based Al2O3 Coating

Rajendra S. Negi et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Physical

Stabilizing and understanding the interface between nickel-rich cathode and PEO-based electrolyte by lithium niobium oxide coating for high-performance all-solid-state batteries

Jianneng Liang et al.

NANO ENERGY (2020)

Add to Collection

Article Chemistry, Physical

Nonflammable organic electrolytes for high-safety lithium-ion batteries

Kuirong Deng et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Article Multidisciplinary Sciences

Use of carbon coating on LiNi0.8Co0.1Mn0.1O2 cathode material for enhanced performances of lithium-ion batteries

Seong-Ju Sim et al.

SCIENTIFIC REPORTS (2020)

Add to Collection

Article Engineering, Chemical

The mechanism of side reaction induced capacity fading of Ni-rich cathode materials for lithium ion batteries

Daozhong Hu et al.

Journal of Energy Chemistry (2020)

Add to Collection

Article Engineering, Environmental

Influence of core and shell components on the Ni-rich layered oxides with core-shell and dual-shell structures

Yiming Sun et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Chemistry, Physical

Highly stable Ni-rich layered oxide cathode enabled by a thick protective layer with bio-tissue structure

Yujing Bi et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Review Chemistry, Physical

Recent progress in carbonyl-based organic polymers as promising electrode materials for lithium-ion batteries (LIBs)

Hao Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Physical

Improving the cycling and air-storage stability of LiNi0.8Co0.1Mn0.1O2 through integrated surface/interface/doping engineering

Yanwu Zhai et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Physical

Synergy of doping and coating induced heterogeneous structure and concentration gradient in Ni-rich cathode for enhanced electrochemical performance

Yong-Chun Li et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection

Article Chemistry, Physical

Improving the reversibility of the H2-H3 phase transitions for layered Ni-rich oxide cathode towards retarded structural transition and enhanced cycle stability

Feng Wu et al.

NANO ENERGY (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Ni/Li Disordering in Layered Transition Metal Oxide: Electrochemical Impact, Origin, and Control

Jiaxin Zheng et al.

ACCOUNTS OF CHEMICAL RESEARCH (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Ultrathin LiV2O4 Layers Modified LiNi0.5Co0.2Mn0.3O2 Single-Crystal Cathodes with Enhanced Activity and Stability

Yao Lu et al.

ADVANCED MATERIALS INTERFACES (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Compositionally and structurally redesigned high-energy Ni-rich layered cathode for next-generation lithium batteries

Un-Hyuck Kim et al.

MATERIALS TODAY (2019)

Add to Collection

Article Chemistry, Physical

Enhanced high-voltage cycling stability of Ni-rich cathode materials via the self-assembly of Mn-rich shells

Xinyu Dong et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Physical

Capacity Fading of Ni-Rich Li[NixCoyMn1-x-y]O2 (0.6 ≤ x ≤ 0.95) Cathodes for High-Energy-Density Lithium-Ion Batteries: Bulk or Surface Degradation?

Hoon-Hee Ryu et al.

CHEMISTRY OF MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Impact of High Valence State Cation Ti/Ta Surface Doping on the Stabilization of Spinel LiNi0.5Mn1.5O4 Cathode Materials: A Systematic Density Functional Theory Investigation

Yuyang Chen et al.

ADVANCED MATERIALS INTERFACES (2018)

Add to Collection

Article Chemistry, Physical

In situ formed LiNi0.8Co0.15Al0.05O2@Li4SiO4 composite cathode material with high rate capability and long cycling stability for lithium-ion batteries

Jun-chao Zheng et al.

NANO ENERGY (2018)

Add to Collection

Article Chemistry, Physical

Variation of Electronic Conductivity within Secondary Particles Revealing a Capacity-Fading Mechanism of Layered Ni-Rich Cathode

Jae-Hyung Kim et al.

ACS ENERGY LETTERS (2018)

Add to Collection

Article Chemistry, Physical

Optimally designed interface of lithium rich layered oxides for lithium ion battery

Zhenjiang He et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Add to Collection

Article Chemistry, Physical

Site-dependent multicomponent doping strategy for Ni-rich LiNi1-2yCoyMnyO2 (y=1/12) cathode materials for Li-ion batteries

Chaoping Liang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Ni-Rich LiNi0.8Co0.1Mn0.1O2 Oxide Coated by Dual-Conductive Layers as High Performance Cathode for Lithium-Ion Batteries

Shi Chen et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Chemistry, Physical

Improved electrochemical properties of Li(Ni0.6Mn0.2Co0.2)O2 by surface coating with Li1.3Al0.3Ti1.7(PO4)3

Ji-won Choi et al.

JOURNAL OF POWER SOURCES (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Effect of Na2SO4 Coating layer on Nickel-Rich Li(NixCoyMnz)O2 Cathode Materials for Lithium-Ion Batteries

Jaewon Choi et al.

ADVANCED MATERIALS INTERFACES (2016)

Add to Collection

© Peeref 2019-2024. All rights reserved.