☆ 4.6 Article

Comparison of properties and cost efficiency of zirconia processed by DIW printing, casting and CAD/CAM-milling

DENTAL MATERIALS (2023)

Related references

Note: Only part of the references are listed.

Article Dentistry, Oral Surgery & Medicine

Mechanical Properties and Bond Strength of Additively Manufactured and Milled Dental Zirconia: A Pilot Study

Nurten Baysal et al.

Summary: This study evaluated and compared the mechanical properties and ceramic bond of additively manufactured and milled dental zirconia materials. The results showed that the additively manufactured zirconia material had lower microhardness and flexural strength compared to the milled zirconia material, but demonstrated adequate bond strength with dental ceramic.

JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY (2022)

Add to Collection

Article Chemistry, Physical

Fracture Resistance of Sintered Monolithic Zirconia Dioxide in Different Thermal Units

Andrea Ordonez Balladares et al.

Summary: This study compared the fracture strength of monolithic zirconium dioxide sintered in two different furnaces. The results showed no significant differences in mechanical strength between the two groups, suggesting that rapid sintering can save time without affecting the material's strength, but it has limited reliability.

MATERIALS (2022)

Add to Collection

Article Construction & Building Technology

Anomalous matrix and interlayer pore structure of 3D-printed fiber-reinforced cementitious composites

Rijiao Yang et al.

Summary: This study demonstrates that the addition of glass microfibers into cementitious slurries can result in an anomalous pore structure in fiber-reinforced cementitious composites (FRCC), but has limited benefits to the mechanical strength.

CEMENT AND CONCRETE RESEARCH (2022)

Add to Collection

Article Construction & Building Technology

Anomalous matrix and interlayer pore structure of 3D-printed fiber-reinforced cementitious composites

Rijiao Yang et al.

Summary: This study shows that adding glass microfibers to cementitious slurries can lead to an anomalous pore structure and changes in the interlayer between fibers. However, limited addition of glass microfibers has no significant impact on the bending and compressive strength of FRCC materials.

CEMENT AND CONCRETE RESEARCH (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of solid loading on properties of zirconia ceramic by direct ink writing

Xiaoguang Xia et al.

Summary: High solid loading water-based zirconia slurries for direct ink writing were successfully prepared in this study, with the investigation on their printability and sintering properties. Increasing the solid loading of zirconia significantly improved the densification and strength of the sintered zirconia ceramic specimens.

MATERIALS RESEARCH EXPRESS (2021)

Add to Collection

Article Chemistry, Physical

Development of 3D Slurry Printing Technology with Submersion-Light Apparatus in Dental Application

Cho-Pei Jiang et al.

Summary: This study introduces an innovative 3D printing technology using submersion-light apparatus to produce zirconia sintered parts with high hardness and good flexural strength. The parts exhibit shrinkage in dimensions during the sintering process.

MATERIALS (2021)

Add to Collection

Review Medicine, General & Internal

3D Printing in Digital Prosthetic Dentistry: An Overview of Recent Developments in Additive Manufacturing

Josef Schweiger et al.

Summary: This article discusses the current applications of 3D printing technology in dental laboratories and practices, as well as evaluates future perspectives. It also examines the ongoing viability of traditional dental laboratory services and manufacturing processes, highlighting the expertise needed for digital additive manufacturing of dental restorations.

JOURNAL OF CLINICAL MEDICINE (2021)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

A simple solution to recycle and reuse dental CAD/CAM zirconia block from its waste residuals

Hao Ding et al.

Summary: This study found that dental CAD/CAM zirconia can be recycled and reused from its waste residuals by adopting a simple method that requires pre-sintering at 950 or 1000 degrees Celsius. Pre-sintering at these temperatures resulted in recycled zirconia with similar properties to control samples, showing that it is a feasible and effective recycling method.

JOURNAL OF PROSTHODONTIC RESEARCH (2021)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Flexural strength and Weibull characteristics of stereolithography additive manufactured versus milled zirconia

Marta Revilla-León et al.

JOURNAL OF PROSTHETIC DENTISTRY (2020)

Add to Collection

Article Chemistry, Physical

Effect of Printing Parameters on Dimensional Error and Surface Roughness Obtained in Direct Ink Writing (DIW) Processes

Irene Buj-Corral et al.

MATERIALS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Direct Ink Writing Technology (3D Printing) of Graphene-Based Ceramic Nanocomposites: A Review

Nestor Washington Solis Pinargote et al.

NANOMATERIALS (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Additive manufacturing of zirconia ceramics: a state-of-the-art review

Xiuping Zhang et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Add to Collection

Article Chemistry, Applied

Characterization of Acid and Basic Sites on Zirconia Surfaces and Nanoparticles by Adsorbed Probe Molecules: A Theoretical Study

Farahnaz Maleki et al.

TOPICS IN CATALYSIS (2020)

Add to Collection

Review Dentistry, Oral Surgery & Medicine

Additive manufacturing of ceramics for dental applications: A review

Raquel Galante et al.

DENTAL MATERIALS (2019)

Add to Collection

Review Dentistry, Oral Surgery & Medicine

Novel Zirconia Materials in Dentistry

Y. Zhang et al.

JOURNAL OF DENTAL RESEARCH (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Robocasting of dense yttria-stabilized zirconia structures

Erwin Peng et al.

JOURNAL OF MATERIALS SCIENCE (2018)

Add to Collection

Review Dentistry, Oral Surgery & Medicine

Additive Manufacturing Techniques in Prosthodontics: Where Do We Currently Stand? A Critical Review

Nawal Alharbi et al.

INTERNATIONAL JOURNAL OF PROSTHODONTICS (2017)

Add to Collection

Article Multidisciplinary Sciences

Linking Rheology and Printability for Dense and Strong Ceramics by Direct Ink Writing

Amin M'Barki et al.

SCIENTIFIC REPORTS (2017)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Biaxial flexural strength of new Bis-GMA/TEGDMA based composites with different fillers for dental applications

Sebastian Wille et al.

DENTAL MATERIALS (2016)

Add to Collection

Article Materials Science, Ceramics

Additive Manufacturing of Dense Ceramic Parts via Direct Ink Writing of Aqueous Alumina Suspensions

Lisa Rueschhoff et al.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2016)

Add to Collection

Article Biochemical Research Methods

Assessment of the biocompatibility of three-dimensional-printed polymers using multispecies toxicity tests

Feng Zhu et al.

BIOMICROFLUIDICS (2015)

Add to Collection

Article Materials Science, Ceramics

Fracture statistics of dental ceramics: Discrimination of strength distributions

Serkan Nohut et al.

CERAMICS INTERNATIONAL (2012)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Maximum voluntary molar bite force in subjects with normal occlusion

Suzana Varga et al.

EUROPEAN JOURNAL OF ORTHODONTICS (2011)

Add to Collection

Review Dentistry, Oral Surgery & Medicine

A practical and systematic review of Weibull statistics for reporting strengths of dental materials

Janet B. Quinn et al.

DENTAL MATERIALS (2010)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

State of the art of zirconia for dental applications

Isabelle Denry et al.

DENTAL MATERIALS (2008)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Stabilized zirconia as a structural ceramic: An overview

J. Robert Kelly et al.

DENTAL MATERIALS (2008)

Add to Collection

Review Dentistry, Oral Surgery & Medicine

An overview of zirconia ceramics: Basic properties and clinical applications

Paolo Francesco Manicone et al.

JOURNAL OF DENTISTRY (2007)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Computer-aided design and fabrication of dental restorations - Current systems and future possibilities

Joerg R. Strub et al.

JOURNAL OF THE AMERICAN DENTAL ASSOCIATION (2006)

Add to Collection

© Peeref 2019-2024. All rights reserved.