☆ 4.7 Article

Research on rheological properties and modification mechanism of waterborne polyurethane modified bitumen

CONSTRUCTION AND BUILDING MATERIALS (2023)

Related references

Note: Only part of the references are listed.

Article Construction & Building Technology

Monte Carlo simulations of deformation behaviour of unbound granular materials based on a real aggregate library

Jue Li et al.

Summary: This study utilizes Monte Carlo simulation to investigate the influence of aggregate morphology on deformation behavior of unbound granular materials. The results show that the deformation behavior is dependent on the size and elongation index (EI) distribution of aggregates.

INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING (2023)

Add to Collection

Article Construction & Building Technology

Effect of loading rate on failure characteristics of asphalt mixtures using acoustic emission technique

Hui Wei et al.

Summary: Uniaxial compression tests were conducted on asphalt mixtures with six loading rates to investigate their failure characteristics and modes. Acoustic emission (AE) technology was used to monitor the entire failure process, and typical AE characteristic parameters were analyzed. The results showed that the failure load and compressive strength of the asphalt mixtures increased significantly with the loading rate. Correlation analysis revealed favorable correlation and regularity in the amplitude-hits and amplitude-energy for loading rates of 0.2-5 mm/min, but no regularity for a loading rate of 0.05 mm/min. The dominant frequency of the AE signals ranged from 50-350 kHz, and the failure mode could be identified based on the difference in AE parameters and dominant frequency distribution.

CONSTRUCTION AND BUILDING MATERIALS (2023)

Add to Collection

Article Green & Sustainable Science & Technology

Effects of waterborne polyurethane on storage stability, rheological properties, and VOCs emission of crumb rubber modified asphalt

Yuechao Zhao et al.

Summary: This study investigates the use of waterborne polyurethane as a shell material to package crumb rubber and prepare a porous composite modifier for asphalt. The experimental results demonstrate that this modified asphalt shows improved high temperature stability and fracture energy, while significantly reducing VOCs emissions.

JOURNAL OF CLEANER PRODUCTION (2022)

Add to Collection

Article Construction & Building Technology

Effect of chemical component characteristics of waste cooking oil on physicochemical properties of aging asphalt

Yuechao Zhao et al.

Summary: The study highlights the benefits of combining waste cooking oil and reclaimed asphalt pavement for economic, environmental, and energy advantages. Classifying waste cooking oil can improve its efficiency in recycled asphalt production, with different components having varied effects on the properties of aged asphalt.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Rheological properties and microscopic characteristics of rejuvenated asphalt using different components from waste cooking oil

Yuechao Zhao et al.

Summary: The utilization of waste in society is important for sustainable development. This study focused on waste cooking oil (WCO) and reclaimed asphalt pavement (RAP), and investigated the impact of different components of WCO on the rheological properties and microscopic characteristics of aged asphalt. The results showed that all components of WCO had a significant effect on mitigating the brittleness of aged asphalt. However, certain wax-like substances in WCO had a negative effect on the fatigue and low-temperature performance of aged asphalt.

JOURNAL OF CLEANER PRODUCTION (2022)

Add to Collection

Article Engineering, Multidisciplinary

Physical, rheological and microstructural properties of waste LDPE and TEOA modified bitumens

Tacettin Geckil et al.

Summary: The study showed that the chemical interaction between LDPE and bitumen can improve the performance properties of bitumen, especially in terms of permanent deformation, fatigue, and thermal crack resistance.

JOURNAL OF THE CHINESE INSTITUTE OF ENGINEERS (2022)

Add to Collection

Article Construction & Building Technology

Experimental study of the performance of porous ultra-thin asphalt overlay

Wei Jiang et al.

Summary: The study found that in Porous ultra-thin asphalt overlay (PUAO), as the air voids increased, the high-temperature rutting dynamic stability decreased, the tensile strength ratio first decreased and then increased, and the acoustic absorption coefficient gradually increased, but the peak frequency value shifted. The PUAO/AC-13 double-layer specimens showed better performance in dynamic stability and low-temperature bending strength compared to the PUAO single-layer specimens, but had a smaller permeability coefficient. The International Friction Index results showed that PUAO material had excellent skid resistance performance.

INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING (2022)

Add to Collection

Article Polymer Science

Blends of poly(ester urethane)s and polyesters as a general design approach for triple-shape memory polymers

Feyza Karasu et al.

Summary: Blending poly(ester urethane)s with a second polyester of different melting temperature can create triple-shape memory polymers with two different temporary shapes. These blends exhibit high fixities and recovery rates, while maintaining attractive mechanical properties.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

Add to Collection

Article Engineering, Environmental

Eco-friendly Route for Thermoplastic Polyurethane Elastomers with Bio-based Hard Segments Composed of Bio-glycol and Mixtures of Aromatic-Aliphatic and Aliphatic-Aliphatic Diisocyanate

Ewa Glowinska et al.

Summary: The research focused on the synthesis and properties examination of partially bio-based thermoplastic polyurethane elastomers. By using different diisocyanate mixtures, the study analyzed the chemical structure, thermal, thermomechanical, mechanical, and physicochemical properties of the materials.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Recycling fish scale powder in improving the performance of asphalt: A sustainable utilization of fish scale waste in asphalt

Songtao Lv et al.

Summary: This study investigates the effect of fish scale powder (FSP) on the performance of asphalt binders, finding that FSP enhances adhesion, viscoelastic properties, temperature susceptibility, and resistance to permanent deformation of asphalt, with little effect on aging and cracking resistance at low content. The physical mixing between FSP and asphalt binder results in a storage-stable product, indicating promising and feasible utilization of FSP as a bio-modifier for asphalt binders.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Chemistry, Applied

Glycerol carbonate methacrylate: A cross-linking agent for hydroxyurethane-acrylate coatings

Roberto Morales-Cerrada et al.

Summary: The translation mentions that coatings made of methyl acrylate materials have high transparency and thermal stability, and their properties can be improved after cross-linking, making them promising coating materials. At the same time, the article also studied the effect of different ratios of monomer mixtures on the material properties.

PROGRESS IN ORGANIC COATINGS (2021)

Add to Collection

Article Construction & Building Technology

Investigating compatibility between TPU and bitumen SARA fractions by means of Hansen solubility parameters and interfacial tension measurements

Raissa Gallu et al.

Summary: Hansen solubility parameters and model oils were used to predict the affinity between TPU and the SARA fractions of bitumen, indicating the preferential compatibility between bitumen and the soft block of TPU. Resins play a key role as compatibilizers, affecting the interfacial tension and mechanical properties of TPU-modified bitumens.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Self-healable hydrophobic polymer material having urethane linkages via a non-isocyanate route and dynamic Diels-Alder 'click' reaction

Sagar Kumar Raut et al.

Summary: The newly synthesized polymer material is prepared through a non-isocyanate route and exhibits excellent self-healing and hydrophobic characteristics via dynamic Diets-Alder 'click' reaction.

CHEMICAL COMMUNICATIONS (2021)

Add to Collection

Article Construction & Building Technology

Rheological properties and micro-characteristics of polyurethane composite modified asphalt

Xin Jin et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Polymer Science

Synthesis and molecular interaction of tung oil-based anionic waterborne polyurethane dispersion

Lei Jiang et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Improvements on high-temperature stability, rheology, and stiffness of asphalt binder modified with waste crayfish shell powder

Songtao Lv et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Construction & Building Technology

Evaluating Fatigue-Damage of Asphalt Binder and Mastic Modified with Nano-Silica and Synthesized Polyurethane Using VECD Method

Mana Motamedi et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2020)

Add to Collection

Article Construction & Building Technology

Rheology-morphology relationships of new polymer-modified bitumen based on thermoplastic polyurethanes (TPU)

Raissa Gallu et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Construction & Building Technology

Negative impacts of environmental factors (UV radiation, water and different solutions) on bitumen and its mechanism

Yuanyuan Li et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Engineering, Biomedical

A biodegradable soy protein isolate-based waterborne polyurethane composite sponge for implantable tissue engineering

Mingming Li et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2020)

Add to Collection

Article Chemistry, Physical

Physical, Chemical, Microstructural and Rheological Properties of Reactive Terpolymer-Modified Bitumen

Tacettin Geckil

MATERIALS (2019)

Add to Collection

Article Chemistry, Applied

Hybrid and biocompatible cellulose/polyurethane nanocomposites with water-activated shape memory properties

Leire Urbina et al.

CARBOHYDRATE POLYMERS (2019)

Add to Collection

Article Construction & Building Technology

Effect of different rejuvenators on the rheological properties of aged SBS modified bitumen in long term aging

Zhilong Cao et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Review Construction & Building Technology

The use of polyurethane for asphalt pavement engineering applications: A state-of-the-art review

Lin Cong et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Construction & Building Technology

Influence of aging on properties of polymer-modified asphalt

Aboelkasim Diab et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Construction & Building Technology

The synergistic effect of organic montmorillonite and thermoplastic polyurethane on properties of asphalt binder

Meng Jia et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Characteristics of Different Types of Basic Oxygen Furnace Slag Filler and its Influence on Properties of Asphalt Mastic

Dezhi Kong et al.

MATERIALS (2019)

Add to Collection

Article Construction & Building Technology

Performance properties of asphalt modified with reactive terpolymer

Tacettin Geckil et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Development of shape memory polyurethane based sealant for concrete pavement

Dongya Shen et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Study on cohesion performance of waterborne epoxy resin emulsified asphalt as interlayer materials

Mengmei Liu et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Effects of steel slag fillers on the rheological properties of asphalt mastic

Chao Li et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Add to Collection

Article Construction & Building Technology

Study on the classical and rheological properties of castor oil-polyurethane pre polymer (C-PU) modified asphalt

Lei Xia et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Add to Collection

Article Chemistry, Physical

A review of the fundamentals of polymer-modified asphalts: Asphalt/polymer interactions and principles of compatibility

Giovanni Polacco et al.

ADVANCES IN COLLOID AND INTERFACE SCIENCE (2015)

Add to Collection

Article Chemistry, Physical

Synergistic effect of anionic and nonionic monomers on the synthesis of high solid content waterborne polyurethane

Hou Lijie et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2015)

Add to Collection

Article Construction & Building Technology

Characterization of compliant polymer concretes for rapid repair of runways

In-Taek Roh et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Add to Collection

Article Construction & Building Technology

Bituminous polyurethane foams for building applications: Influence of bitumen hardness

M. A. Izquierdo et al.

CONSTRUCTION AND BUILDING MATERIALS (2012)

Add to Collection

Article Chemistry, Applied

Effect of processing on the rheological properties of poly-urethane/urea bituminous products

V. Carrera et al.

FUEL PROCESSING TECHNOLOGY (2010)

Add to Collection

Article Energy & Fuels

Rheological effects of waxes in bitumen

Y Edwards et al.

ENERGY & FUELS (2003)

Add to Collection

Article Polymer Science

Experimental evidence of the glass transition in a metallocene ethylene-1-octene copolymer and its composites with glass fibre

ML Cerrada et al.

POLYMER (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.