Related references
Note: Only part of the references are listed.A review paper on direct tensile behavior and test methods of textile reinforced cementitious composites
Van Doan Truong et al.
COMPOSITE STRUCTURES (2021)
Compression and Strain Predictive Models in Non-Structural Recycled Concretes Made from Construction and Demolition Wastes
Evelio Teijon-Lopez-Zuazo et al.
MATERIALS (2021)
A Comparative Study of 2D and 3D Digital Image Correlation Approaches for the Characterization and Numerical Analysis of Composite Materials
Javier Pisonero et al.
IEEE ACCESS (2021)
Digital image correlation and reliability-based methods for the design and repair of pressure pipes through composite solutions
Roberto Garcia-Martin et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Lessons Learned on the Tensile and Bond Behavior of Fabric Reinforced Cementitious Matrix (FRCM) Composites
Gianmarco de Felice et al.
FRONTIERS IN BUILT ENVIRONMENT (2020)
Digital image correlation (DIC) for measurement of strains and displacements in coarse, low volume-fraction FRP composites used in civil infrastructure
Enrique del Rey Castillo et al.
COMPOSITE STRUCTURES (2019)
Tensile behaviour of glass FRCM systems with fabrics' overlap: Experimental results and numerical modeling
Jacopo Donnini et al.
COMPOSITE STRUCTURES (2019)
Bond between Carbon Fabric-Reinforced Cementitious Matrix and Masonry Substrate
Luciano Ombres et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2019)
Three-dimensional finite element modeling of inorganic-matrix composite materials using a mesoscale approach
G. Mazzucco et al.
COMPOSITES PART B-ENGINEERING (2018)
Comparison between different tensile test set-ups for the mechanical characterization of inorganic-matrix composites
T. D'Antino et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Recommendation of RILEM Technical Committee 250-CSM: Test method for Textile Reinforced Mortar to substrate bond characterization
Gianmarco de Felice et al.
MATERIALS AND STRUCTURES (2018)
Acceptance Criteria for Tensile Characterization of Fabric-Reinforced Cementitious Matrix Systems for Concrete and Masonry Repair
Stefano De Santis et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2018)
A Review of Speckle Pattern Fabrication and Assessment for Digital Image Correlation
Y. L. Dong et al.
EXPERIMENTAL MECHANICS (2017)
Tensile behaviour of a basalt TRM strengthening system: Influence of mortar and reinforcing textile ratios
Carmelo Caggegi et al.
COMPOSITES PART B-ENGINEERING (2017)
Use of DIC technique for investigating the behaviour of FRCM materials for strengthening masonry elements
A. Bilotta et al.
COMPOSITES PART B-ENGINEERING (2017)
Experimental investigation of tensile and bond properties of Carbon-FRCM composites for strengthening masonry elements
Francesca Giulia Carozzi et al.
COMPOSITES PART B-ENGINEERING (2017)
Glass fabric reinforced cementitious matrix: Tensile properties and bond performance on masonry substrate
Marianovella Leone et al.
COMPOSITES PART B-ENGINEERING (2017)
Textile-reinforced mortar (TRM) versus fibre-reinforced polymers (FRP) in flexural strengthening of RC beams
Saad M. Raoof et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Performance assessment of basalt FRCM for retrofit applications on masonry
Gian Piero Lignola et al.
COMPOSITES PART B-ENGINEERING (2017)
Experimental analysis on tensile and bond properties of PBO and aramid fabric reinforced cementitious matrix for strengthening masonry structures
Carmelo Caggegi et al.
COMPOSITES PART B-ENGINEERING (2017)
Mechanical characterization of textile reinforced inorganic-matrix composites
T. D'Antino et al.
COMPOSITES PART B-ENGINEERING (2017)
Test methods for Textile Reinforced Mortar systems
Stefano De Santis et al.
COMPOSITES PART B-ENGINEERING (2017)
Application of Digital Image Correlation to composite reinforcements testing
Marcin Tekieli et al.
COMPOSITE STRUCTURES (2017)
Mechanical properties of FRCM using carbon fabrics with different coating treatments
Jacopo Donnini et al.
COMPOSITES PART B-ENGINEERING (2016)
TRM vs FRP jacketing in shear strengthening of concrete members subjected to high temperatures
Zoi C. Tetta et al.
COMPOSITES PART B-ENGINEERING (2016)
Testing Procedures for the Uniaxial Tensile Characterization of Fabric-Reinforced Cementitious Matrix Composites
Diana Arboleda et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2016)
Photogrammetric, Geometrical, and Numerical Strategies to Evaluate Initial and Current Conditions in Historical Constructions: A Test Case in the Church of San Lorenzo (Zamora, Spain)
Luis Javier Sanchez-Aparicio et al.
REMOTE SENSING (2016)
Steel reinforced grout systems for the strengthening of masonry structures
Stefano De Santis et al.
COMPOSITE STRUCTURES (2015)
Analysis of the bond between Fabric Reinforced Cementitious Mortar (FRCM) strengthening systems and concrete
Luciano Ombres
COMPOSITES PART B-ENGINEERING (2015)
Tensile behaviour of mortar-based composites for externally bonded reinforcement systems
Stefano De Santis et al.
COMPOSITES PART B-ENGINEERING (2015)
Mechanical properties and debonding strength of Fabric Reinforced Cementitious Matrix (FRCM) systems for masonry strengthening
Francesca Giulia Carozzi et al.
COMPOSITES PART B-ENGINEERING (2015)
Bond characteristics of carbon fabric-reinforced cementitious matrix in double shear tests
Oluwafunmilayo Awani et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Experimental and analytical study of reinforced concrete beams shear strengthened with different types of textile-reinforced mortar
Christian Escrig et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Ncorr: Open-Source 2D Digital Image Correlation Matlab Software
J. Blaber et al.
EXPERIMENTAL MECHANICS (2015)
Numerical modeling of Fabric Reinforce Cementitious Matrix composites (FRCM) in tension
Elisa Bertolesi et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Matrix-fiber bond behavior in PBO FRCM composites: A fracture mechanics approach
T. D'Antino et al.
ENGINEERING FRACTURE MECHANICS (2014)
Current practice and open issues in strengthening historical buildings with composites
Maria Rosa Valluzzi et al.
MATERIALS AND STRUCTURES (2014)
Mortar-based systems for externally bonded strengthening of masonry
Gianmarco de Felice et al.
MATERIALS AND STRUCTURES (2014)
Influence of experimental setups on the apparent uniaxial tensile load-bearing capacity of Textile Reinforced Concrete specimens
J. Hartig et al.
MATERIALS AND STRUCTURES (2012)
Dynamic tensile testing of fabric-cement composites
Deju Zhu et al.
CONSTRUCTION AND BUILDING MATERIALS (2011)
Contribution to direct tensile testing of textile reinforced concrete (TRC) composites
R. Contamine et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Durability of textile reinforced concrete made with AR glass fibre: effect of the matrix composition
Marko Butler et al.
MATERIALS AND STRUCTURES (2010)
Mean intensity gradient: An effective global parameter for quality assessment of the speckle patterns used in digital image correlation
Bing Pan et al.
OPTICS AND LASERS IN ENGINEERING (2010)
Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review
Bing Pan et al.
MEASUREMENT SCIENCE AND TECHNOLOGY (2009)
Influences of textile characteristics on the tensile properties of warp knitted cement based composites
Alva Peled et al.
CEMENT & CONCRETE COMPOSITES (2008)
Measuring delamination in carbon/epoxy composites using a shadow moire laser based imaging technique
M. A. Seif et al.
COMPOSITE STRUCTURES (2007)
Load-bearing behaviour and simulation of textile reinforced concrete
J. Hegger et al.
MATERIALS AND STRUCTURES (2006)
Geometrical characteristics and efficiency of textile fabrics for reinforcing cement composites
A Peled et al.
CEMENT AND CONCRETE RESEARCH (2000)