☆ 4.7 Article

Slurry rheological behaviors and effects on the pore evolution of fly ash/metakaolin-based geopolymer foams in chemical foaming system with high foam content

CONSTRUCTION AND BUILDING MATERIALS (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Ceramics

Open-cell mullite ceramic foams derived from porous geopolymer precursors with tailored porosity

Jiahuan Shao et al.

Summary: Porous geopolymer precursors were prepared using bauxite, fly ash, and metakaolin as raw materials, and porous mullite ceramics were obtained after ion exchange and high-temperature sintering. The concentration of blowing agent, ion-exchange time, and sintering temperature were found to have significant effects on the properties of the mullite ceramics. The resulting mullite foams exhibited a similar open-celled porous structure to the starting geopolymer precursors and had high porosity and compressive strength.

JOURNAL OF ADVANCED CERAMICS (2023)

Add to Collection

Article Materials Science, Ceramics

Porous alkali-activated material from hypergolic coal gangue by microwave foaming for methylene blue removal

Xinyu Li et al.

Summary: 100% hypergolic coal gangue (HCG)-based geopolymer foams were successfully produced by a novel saponification-microwave foaming combined route. The addition of expired vegetable oil that underwent a saponification reaction resulted in the formation of mesopores. The foam with 12.59 wt% oil exhibited the best adsorption properties.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2023)

Add to Collection

Article Construction & Building Technology

Development and use of geopolymers for energy conversion: An overview

Eric Enrique Sanchez Diaz et al.

Summary: This study revises the use of geopolymers for energy conversion, with a focus on their conductive properties, Seebeck effect, and piezoelectric effect. It discusses the effects of materials like TiO2 and carbon-based materials, as well as alkaline activator concentrations, on geopolymers. The research emphasizes the piezoelectric effects on geopolymers when incorporating graphene and TiO2 as fillers, showcasing their potential in solar, thermal, and mechanical energy conversion.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Construction & Building Technology

Enhancing the chemical foaming process using superplasticizer in aerated geopolymer concrete

Kirubajiny Pasupathy et al.

Summary: This study investigates the method of enhancing the foaming behavior in geopolymer foam concrete using a superplasticizer. The results show that the dosage of superplasticizer significantly affects the expansion behavior of the concrete.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Review Construction & Building Technology

Directly foamed geopolymers: A review of recent studies

Vaclav Koci et al.

Summary: Geopolymers have gained attention for their environmentally friendly characteristics, such as utilization of waste materials, low energy demands, and low carbon dioxide emissions. However, using them as a concrete replacement is not feasible in the near future, prompting the exploration of alternative applications and addressing existing challenges and gaps.

CEMENT & CONCRETE COMPOSITES (2022)

Add to Collection

Article Construction & Building Technology

Experimental investigation on fractal characteristics of pores in air-entrained concrete at low atmospheric pressure

Xu-li Lan et al.

Summary: This study investigates the characteristics of pore structure of air-entrained concrete at low atmospheric pressure and standard atmospheric pressure through in situ experiments. The results show that low atmospheric pressure has a significant impact on the fractal properties of pores and pore volume.

CEMENT & CONCRETE COMPOSITES (2022)

Add to Collection

Article Construction & Building Technology

Sodium glass liquid from glass waste as a user-friendly hardener in structural geopolymer systems

Sina Dadsetan et al.

Summary: This paper aims to maximize the use of glass waste in geopolymer technology by utilizing it as a friendly hardener product and a precursor powder in the production of structural geopolymer binders. By adjusting the chemical ratios, high strength, user-friendly, and cost-effective geopolymer binders were developed.

CEMENT & CONCRETE COMPOSITES (2022)

Add to Collection

Article Materials Science, Ceramics

Bubble behaviors in chemical direct foaming process and effects on pore structures of geopolymer foams

Xuhao Zhang et al.

Summary: In this study, the bubble behaviors during the foaming process of geopolymer foams (GPFs) and their effects on the pore structure of molded GPFs were examined. The relationship between various factors and the resulting pore structures were investigated, providing new insights and methods for the preparation of highly porous ceramics.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2022)

Add to Collection

Review Engineering, Manufacturing

Porous geopolymer composites: A review

Xiaohong Zhang et al.

Summary: Porous geopolymers have gained attention for their low cost, ease of fabrication, suitable properties, and thermal and chemical stability. Research efforts have been focused on exploring composite materials to enhance their properties and functionalities. This review aims to advance innovative fabrication methods and promote the technological application of porous geopolymer components.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

Add to Collection

Article Materials Science, Ceramics

Effects of surfactants/stabilizing agents on the microstructure and properties of porous geopolymers by direct foaming

Yingjie Qiao et al.

Summary: Metakaolin-based porous geopolymers were synthesized by direct foaming with various surfactants/stabilizing agents, and their pore structure, density, porosity, as well as properties like thermal conductivity and compression strength were studied. The relationship between compression strength and thermal conductivity with porosity was successfully evaluated using experimental data and theoretical models.

JOURNAL OF ASIAN CERAMIC SOCIETIES (2021)

Add to Collection

Article Chemistry, Physical

Sequential Post-Synthetic Modification and Evaluation of Catalytic Activity of Hierarchically Porous Sulfated Geopolymer in the Oxidative Desulfurization of Dibenzothiophene

Snehlata Kumari et al.

Summary: A novel sulfated hierarchically porous geopolymer catalyst was prepared through sequential desilication, ion-exchange and sulfation techniques, resulting in significantly increased oxidation activity towards dibenzothiophene. The proposed electronic mechanism suggested a two-stage reaction process, with the catalyst formation and nucleophilic attack both elucidated with suitable kinetic models. Effective regeneration after three cycles demonstrated the potential for efficient oxidative desulfurization.

CATALYSIS SURVEYS FROM ASIA (2021)

Add to Collection

Article Construction & Building Technology

Progress, current thinking and challenges in geopolymer foam concrete technology

K. Dhasindrakrishna et al.

Summary: Geopolymer foam concrete (GFC) with its porous structure offers lightweight, acoustic and thermal insulation, and fire resistance properties, which are influenced by materials, foaming methods, curing conditions, and additives. Further research is needed in understanding fresh properties, durability, and processing techniques to facilitate industrial applications and the development of 3D printable GFC.

CEMENT & CONCRETE COMPOSITES (2021)

Add to Collection

Review Construction & Building Technology

Rheology of alkali-activated materials: A review

Cuifang Lu et al.

Summary: This paper comprehensively reviews the rheological properties of alkali-activated materials (AAMs) and the influence of composition factors on their rheology, providing guidance for future research directions in the field of AAM workability and mechanical requirements.

CEMENT & CONCRETE COMPOSITES (2021)

Add to Collection

Article Materials Science, Ceramics

Development of porous geopolymers foamed by aluminum and zinc powders

D. Kioupis et al.

Summary: The study found that the foaming agent content is the determining factor of geopolymer properties, while alkali concentration plays a crucial role in pore morphology and strength development. Foaming with Aluminum is more effective than Zinc powder due to the release of more gases. Additionally, the incorporation of potassium ions contributes to the development of porous structures.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Geopolymer foams: An overview of recent advancements

Rui M. Novais et al.

PROGRESS IN MATERIALS SCIENCE (2020)

Add to Collection

Article Construction & Building Technology

Alkali activated metakaolin with high limestone contents - Statistical modeling of strength and environmental and cost analyses

Pedro Perez-Cortes et al.

CEMENT & CONCRETE COMPOSITES (2020)

Add to Collection

Article Materials Science, Ceramics

From bulk to porous structures: Tailoring monoclinic SrAl2Si2O8 ceramic by geopolymer precursor technique

Shengjian Zhao et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical properties of geopolymer composite foams reinforced with carbon nanofibers via modified hydrogen peroxide method

Shu Yan et al.

MATERIALS CHEMISTRY AND PHYSICS (2020)

Add to Collection

Article Biotechnology & Applied Microbiology

Current development of geopolymer as alternative adsorbent for heavy metal removal

Tee How Tan et al.

ENVIRONMENTAL TECHNOLOGY & INNOVATION (2020)

Add to Collection

Review Construction & Building Technology

The effect of nanomaterials on properties of geopolymers derived from industrial by-products: A state-of-the-art review

Bharat Bhushan Jindal et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Construction & Building Technology

Rheology and agglomerate structure of fresh geopolymer pastes with different Ms ratio of waterglass

Da-Wang Zhang et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Foamed geopolymer: The relationship between rheological properties of geopolymer paste and pore-formation mechanism

Gonghui Gu et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Engineering, Environmental

In -situ synchronous carbonation and self -activation of biochar/geopolymer composite membrane: Enhanced catalyst for oxidative degradation of tetracycline in water

Jiaqi Huang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Chemistry, Physical

Microstructure, Compressive Strength and Sound Insulation Property of Fly Ash-Based Geopolymeric Foams with Silica Fume as Foaming Agent

Xinhui Liu et al.

MATERIALS (2020)

Add to Collection

Article Construction & Building Technology

Effect of yield stress development on the foam-stability of aerated geopolymer concrete

K. Dhasindrakrishna et al.

CEMENT AND CONCRETE RESEARCH (2020)

Add to Collection

Article Materials Science, Ceramics

Tailoring the microstructure of high porosity Si3N4 foams by direct foaming with mixed surfactants

Zhongpei Du et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2019)

Add to Collection

Article Construction & Building Technology

Optimal cement paste yield stress for the production of stable cement foams

Blandine Feneuil et al.

CEMENT AND CONCRETE RESEARCH (2019)

Add to Collection

Article Construction & Building Technology

Stability criterion for fresh cement foams

Blandine Feneuil et al.

CEMENT AND CONCRETE RESEARCH (2019)

Add to Collection

Article Construction & Building Technology

Metal powders as foaming agents in fly ash based geopolymer synthesis and their impact on the structure depending on the Na/Al ratio

E. Kraenzlein et al.

CEMENT & CONCRETE COMPOSITES (2018)

Add to Collection

Article Construction & Building Technology

Enhancing the strength of pre-made foams for foam concrete applications

Ailar Hajimohammadi et al.

CEMENT & CONCRETE COMPOSITES (2018)

Add to Collection

Article Construction & Building Technology

Effect of fly ash microsphere on the rheology and microstructure of alkali-activated fly ash/slag pastes

Tao Yang et al.

CEMENT AND CONCRETE RESEARCH (2018)

Add to Collection

Review Materials Science, Ceramics

Processing, properties and applications of highly porous geopolymers: A review

Chengying Bai et al.

CERAMICS INTERNATIONAL (2018)

Add to Collection

Article Engineering, Multidisciplinary

Low-temperature fabrication of SiC/geopolymer cellular composites

Chengying Bai et al.

COMPOSITES PART B-ENGINEERING (2018)

Add to Collection

Article Green & Sustainable Science & Technology

High pH buffer capacity biomass fly ash-based geopolymer spheres to boost methane yield in anaerobic digestion

Rui M. Novais et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Lightweight aerated metakaolin-based geopolymer incorporating municipal solid waste incineration bottom ash as gas-forming agent

Weiping Zhu et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Add to Collection

Article Construction & Building Technology

Rheological properties and microstructure of binary waste red brick powder/metakaolin geopolymer

Pavel Rovnanik et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Materials Science, Ceramics

Fly ash based geopolymeric foams using silica fume as pore generation agent. Physical, mechanical and acoustic properties

Y. Luna-Galiano et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2018)

Add to Collection

Article Materials Science, Ceramics

Geopolymer foams obtained by the saponification/peroxide/gelcasting combined route using different soap foam precursors

Marcelo S. Cilla et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2017)

Add to Collection

Article Materials Science, Ceramics

Direct ink writing of geopolymeric inks

Giorgia Franchin et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Synthesis of open-cell ceramic foam derived from geopolymer precursor via replica technique

Tomas Kovarik et al.

MATERIALS LETTERS (2017)

Add to Collection

Article Engineering, Multidisciplinary

Lightweight geopolymer-based hybrid materials

Giuseppina Roviello et al.

COMPOSITES PART B-ENGINEERING (2017)

Add to Collection

Article Construction & Building Technology

Alkali-activated mortars: Workability and rheological behaviour

M. M. Alonso et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Add to Collection

Article Construction & Building Technology

How does aluminium foaming agent impact the geopolymer formation mechanism?

Ailar Hajimohammadi et al.

CEMENT & CONCRETE COMPOSITES (2017)

Add to Collection

Article Engineering, Environmental

Novel porous fly-ash containing geopolymer monoliths for lead adsorption from wastewaters

Rui M. Novais et al.

JOURNAL OF HAZARDOUS MATERIALS (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Characterization of geopolymer fly-ash based foams obtained with the addition of Al powder or H2O2 as foaming agents

V. Ducman et al.

MATERIALS CHARACTERIZATION (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Insights into the macroporosity of freeze-cast hierarchical geopolymers

Elettra Papa et al.

RSC ADVANCES (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Development of porous fly ash-based geopolymer with low thermal conductivity

Junjie Feng et al.

MATERIALS & DESIGN (2015)

Add to Collection

Article Chemistry, Applied

Synthesis of porous hierarchical geopolymer monoliths by ice-templating

Elettra Papa et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2015)

Add to Collection

Article Construction & Building Technology

The interrelationship between surface chemistry and rheology in alkali activated slag paste

Alireza Kashani et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Add to Collection

Article Construction & Building Technology

Rheological characterization of fly ash-based suspensions

M. Romagnoli et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Add to Collection

Article Materials Science, Ceramics

Open cell geopolymer foams by a novel saponification/peroxide/gelcasting combined route

Marcelo Strozi Cilla et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2014)

Add to Collection

Article Materials Science, Ceramics

Effect of metallic Si addition on polymerization degree of in situ foamed alkali-aluminosilicates

Valentina Medri et al.

CERAMICS INTERNATIONAL (2013)

Add to Collection

Article Materials Science, Ceramics

Production of nepheline/quartz ceramics from geopolymer mortars

C. Kuenzel et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2013)

Add to Collection

Article Biochemistry & Molecular Biology

Fly Ash-based Geopolymer Lightweight Concrete Using Foaming Agent

Mohd Mustafa Al Bakri Abdullah et al.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2012)

Add to Collection

Article Materials Science, Ceramics

Geomaterial foams: role assignment of raw materials in the network formation

E. Prud'homme et al.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2012)

Add to Collection

Article Construction & Building Technology

Analytical models for estimating yield stress of high-performance pseudoplastic grout

A Yahia et al.

CEMENT AND CONCRETE RESEARCH (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.