☆ 4.7 Article

Effect mechanism of block convexity on the shear behaviors of soil-rock mixtures by the developed 3D spherical harmonics-based modeling approach

COMPUTERS AND GEOTECHNICS (2023)

Related references

Note: Only part of the references are listed.

Article Computer Science, Interdisciplinary Applications

Effects of gravel content and shape on shear behaviour of soil-rock mixture: Experiment and DEM modelling

Yongsheng Yao et al.

Summary: The study found that gravel shape has a greater impact on the shear strength of soil-rock mixture (SRM) than gravel content, and the discrete element method can accurately predict the mechanical properties and deformation behavior of the material. As gravel content increases, the contribution of contact force within gravel particles increases, and the interlocking work has a nonlinear positive correlation with the increase of sphericity.

COMPUTERS AND GEOTECHNICS (2022)

Add to Collection

Article Engineering, Geological

Influence of Block form on the Shear Behaviour of Soft Soil-Rock Mixtures by 3D Block Modelling Approaches

Han Zhang et al.

Summary: The influence of block forms on the shear behaviour of soil-rock mixtures with soft blocks was investigated using the discrete element method. The results showed that the shape of the blocks affects their breakage degree and the shear strength of the soil-rock mixtures.

ROCK MECHANICS AND ROCK ENGINEERING (2022)

Add to Collection

Article Engineering, Environmental

Soil-rock mixture slope stability analysis by microtremor survey and discrete element method

Wenwei Gao et al.

Summary: The study focuses on the research of S-RM landslides through the use of microtremor survey method to detect slopes and the discrete element method to analyze the sliding process. It accurately obtains the rock block structure and distribution data, revealing the complex deformation and failure mechanism. The results of this study are of great reference value for landslide prevention and disaster reduction.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2022)

Add to Collection

Article Engineering, Geological

Meso and macroscale mechanical behaviors of soil-rock mixtures

Wen-Jie Xu et al.

Summary: Soil-rock mixtures (S-RMs) are composed of large rock blocks and fine soil particles, exhibiting complex physical and mechanical behaviors. This study used CT image sequences and a 3D Meso-Structure Reconstruction and Analysis System (MSRAS(3D)) to investigate the deformation and failure mechanisms of S-RMs. The results revealed the influence of rock block breakage on the strength and p-q curve of S-RMs, suggesting a modified Mohr-Coulomb strength relationship in the form of a power function.

ACTA GEOTECHNICA (2022)

Add to Collection

Article Engineering, Environmental

Research on the effect of rock content and sample size on the strength behavior of soil-rock mixture

Wen-Jie Xu et al.

Summary: The mechanical behaviors of soil-rock mixture (S-RM) are complicated and influenced by rock block content and gradation composition. The study found that deviator stress ratio and friction strength of S-RM increase with rock block content, but tend to decrease with increasing confining pressure. The breakage mode of rock blocks can be categorized into four types, leading to a power function strength envelope curve for S-RM.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2021)

Add to Collection

Article Environmental Sciences

Granular discrete element simulation of the evolution characteristics of the shear band in soil-rock mixture based on particle rotation analysis

Jun Yu et al.

Summary: Utilizing 3D laser scanning technology, surface morphologies of rock blocks in soil-rock mixture were scanned, and numerical models were established. Large-scale direct shear tests revealed the rotation angles of rock blocks and formation of shear bands. Different proportions of rock blocks affected the internal failures in soils, with low proportions leading to thin band-shaped destruction and high proportions causing thick cloud-like distribution of destruction. Shear fractures in soils and tensile fractures along contact planes were the main patterns of failure in S-RM under shear tests.

ENVIRONMENTAL EARTH SCIENCES (2021)

Add to Collection

Article Engineering, Geological

Tunneling in heterogeneous rock masses with a block-in-matrix fabric

Maria Lia Napoli et al.

Summary: The presence of blocks in rock masses has a significant influence on the overall behavior, and it should not be neglected in engineering design. This study investigates the stability of a deep circular tunnel in a heterogeneous rock mass with chaotic block-in-matrix fabric, using a stochastic approach to generate various tunnel configurations for analysis. The study highlights the potential inaccuracies caused by neglecting the presence of blocks and compares with simplified approaches commonly used in geotechnical engineering.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2021)

Add to Collection

Article

An experimental investigation on the particle breakage and strength properties of soil-rock mixture

Yiliang Tu et al.

Arabian Journal of Geosciences (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

3D modelling of soil-rock mixtures considering the morphology and fracture characteristics of breakable blocks

Xinli Hu et al.

Summary: This study used the discrete element method to investigate the failure mechanisms of a soil-rock mixture, and successfully simulated the mechanical response of the sample through a generated S-RM DEM model based on experimental data, highlighting the importance of modeling block breakage and internal fractures.

COMPUTERS AND GEOTECHNICS (2021)

Add to Collection

Article Engineering, Environmental

Investigation of geomechanical characterization and size effect of soil-rock mixture: a case study

Wei Gao et al.

Summary: The study conducted horizontal push-shear tests on soil-rock mixtures in Baidian County, China to investigate the mechanical strength characteristics and size effect. It found that the mechanical parameters of different S-RM sizes exhibit two distinct trends corresponding to block proportion by weight, suggesting an influence of the non-uniform coefficient on size effect.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

DEM study on the effect of roundness on the shear behaviour of granular materials

Zhihong Nie et al.

COMPUTERS AND GEOTECHNICS (2020)

Add to Collection

Article Engineering, Geological

Evaluation of the shear strength parameters of a compacted S-RM fill using improved 2-D and 3-D limit equilibrium methods

Han Zhang et al.

ENGINEERING GEOLOGY (2020)

Add to Collection

Article Engineering, Geological

Strain-softening failure mode after the post-peak as a unique mechanism of ruptures in a frozen soil-rock mixture

Zhiqing Li et al.

ENGINEERING GEOLOGY (2020)

Add to Collection

Article Engineering, Geological

Three-dimensional mesoscale computational modeling of soil-rock mixtures with concave particles

Qingxiang Meng et al.

ENGINEERING GEOLOGY (2020)

Add to Collection

Article Engineering, Geological

Effects of initial particle gradation and rock content on crushing behaviors of weathered phyllite fills - A case of eastern Ankang section of Shiyan-Tianshui highway, China

Feifei Liu et al.

JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2020)

Add to Collection

Article Engineering, Geological

Three-dimensional sphericity, roundness and fractal dimension of sand particles

B. Zhou et al.

GEOTECHNIQUE (2018)

Add to Collection

Article Engineering, Chemical

Quantitative analysis of the three-dimensional roundness of granular particles

Nie Zhihong et al.

POWDER TECHNOLOGY (2018)

Add to Collection

Article Engineering, Geological

Mechanical Properties of Strongly Weathered Rock-Soil Mixtures with Different Rock Block Contents

Hou-Zhen Wei et al.

INTERNATIONAL JOURNAL OF GEOMECHANICS (2018)

Add to Collection

Article Engineering, Geological

Generation of a realistic 3D sand assembly using X-ray micro-computed tomography and spherical harmonic-based principal component analysis

B. Zhou et al.

INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS (2017)

Add to Collection

Article Engineering, Geological

Shear deformation and strength of the interphase between the soil-rock mixture and the benched bedrock slope surface

Duofeng Cen et al.

ACTA GEOTECHNICA (2017)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Discrete element modeling of crushable sands considering realistic particle shape effect

Ru Fu et al.

COMPUTERS AND GEOTECHNICS (2017)

Add to Collection

Article Engineering, Geological

Discrete element modelling of a soil-rock mixture used in an embankment dam

Wen-Jie Xu et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2016)

Add to Collection

Article Engineering, Geological

Triaxial tests of soil-rock mixtures with different rock block distributions

Hai-Yang Zhang et al.

SOILS AND FOUNDATIONS (2016)

Add to Collection

Article Engineering, Geological

Micromorphology characterization and reconstruction of sand particles using micro X-ray tomography and spherical harmonics

Bo Zhou et al.

ENGINEERING GEOLOGY (2015)

Add to Collection

Article Engineering, Geological

Traditional soil particle sphericity, roundness and surface roughness by computational geometry

J. Zheng et al.

GEOTECHNIQUE (2015)

Add to Collection

Article Engineering, Geological

An approach to predicting the overall strengths of unwelded bimrocks and bimsoils

A. Kalender et al.

ENGINEERING GEOLOGY (2014)

Add to Collection

Article Engineering, Civil

Effects of particle shape on shear strength of clay-gravel mixture

Yanrong Li et al.

KSCE JOURNAL OF CIVIL ENGINEERING (2013)

Add to Collection

Article Engineering, Multidisciplinary

Impact of gradation on the shear strength-dilation behavior of well graded sand-gravel mixtures

A. Hamidi et al.

SCIENTIA IRANICA (2012)

Add to Collection

Article Engineering, Geological

Characterization and DEM Modeling of Shear Zones at a Large Dam Foundation

Alessandro Graziani et al.

INTERNATIONAL JOURNAL OF GEOMECHANICS (2012)

Add to Collection

Article Engineering, Geological

In situ non-conventional shear tests for the mechanical characterisation of a bimrock

N. Coli et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2011)

Add to Collection

Article Engineering, Geological

Study on the shear strength of soil-rock mixture by large scale direct shear test

Wen-Jie Xua et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2011)

Add to Collection

Article Engineering, Geological

Some geomechanical properties of soil-rock mixtures in the Hutiao Gorge area, China

W. -J. Xu et al.

GEOTECHNIQUE (2007)

Add to Collection

Article Engineering, Geological

Estimating the uniaxial compressive strength of a volcanic bimrock

H Sonmez et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2006)

Add to Collection

© Peeref 2019-2024. All rights reserved.