4.7 Article

Flexible piezoelectric generator based on PLLA/ZnO oriented fibers for wearable self-powered sensing

Related references

Note: Only part of the references are listed.
Article Biochemistry & Molecular Biology

Highly Sensitive Multifunctional Electronic Skin Based on Nanocellulose/MXene Composite Films with Good Electromagnetic Shielding Biocompatible Antibacterial Properties

Dongning Liu et al.

Summary: A multifunctional electronic skin with excellent mechanical, electromagnetic shielding, biocompatibility, and antibacterial properties was successfully prepared using TOCN/Ti3C2TX composite film. The piezoresistive sensor assembled from the composite film exhibited high sensitivity, fast response and recovery time, ultralow monitoring limit, and long-term stability, and could detect human daily activities.

BIOMACROMOLECULES (2022)

Review Materials Science, Multidisciplinary

Piezoelectric polymers: theory, challenges and opportunities

Michael Smith et al.

Summary: Piezoelectric materials, including polymers, have the ability to directly transduce electrical and mechanical energy, making them attractive for various applications. Despite lower piezoelectric coefficients, the flexibility, ease of processing, and biocompatibility of piezoelectric polymers make them preferable for certain applications. This review covers theoretical and practical concepts of piezoelectricity in polymers, as well as applications and future research directions.

INTERNATIONAL MATERIALS REVIEWS (2022)

Article Chemistry, Applied

Porous cellulose composite aerogel films with super piezoelectric properties for energy harvesting

Yiheng Song et al.

Summary: Flexible porous piezoelectric aerogel films based on TOCN and Mo-S2 nanosheets were developed, exhibiting good piezoelectric properties. The aerogel film with 6 wt% MoS2 showed the best output performance, generating high open circuit voltage and short-circuit current.

CARBOHYDRATE POLYMERS (2022)

Article Chemistry, Physical

Ultra-porous cellulose nanofibril aerogel films as excellent triboelectric positive materials via direct freeze-drying of dispersion

Yiheng Song et al.

Summary: This study reports the preparation of high-specific surface area cellulose nanofibrils aerogel films and discusses the effects of cellulose structure and device parameters on the triboelectric output performance. The pure cellulose aerogel film, without any fillers or chemical modification, achieved a high power density in the triboelectric nanogenerator.

NANO ENERGY (2022)

Article Materials Science, Composites

Ultra-sensitive and flexible electronic skin from nanocellulose/AgNWs hydrogel films with highly transparent, antibacterial and electromagnetic shielding properties

Haiyu Xu et al.

Summary: With the rapid development of the electronic information industry, the application of flexible wearable electronic devices in various fields is attracting more and more attention. The flexible E-skin prepared using new materials exhibits excellent performance and has great application potential in the future.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

Article Chemistry, Applied

TOCN/copper calcium titanate composite aerogel films as high-performance triboelectric materials for energy harvesting

Yiheng Song et al.

Summary: Researchers have developed a composite aerogel film based on cellulose and copper calcium titanate nanoparticles, which shows enhanced dielectric performance and high output performance for triboelectric nanogenerators. The results indicate that this composite film can be used as an efficient and low-cost cellulose-based positive material for energy harvesting.

CARBOHYDRATE POLYMERS (2022)

Article Materials Science, Multidisciplinary

Improved piezoelectricity of polylactide using vitamin B2for poling-free mechanical and acoustic nanogenerators

Bingya Li et al.

Summary: A poling-free piezoelectric nanogenerator using a PLLA/VB(2) composite film was designed and fabricated in this study, showing significantly enhanced output performance and good electrical responses under mechanical and acoustic stimulations. With a maximum power density of 75.68 mW cm(-3), it has great application potential in ambient energy harvesting, wearable devices, and human-machine controlling systems.

JOURNAL OF MATERIALS SCIENCE (2021)

Article Materials Science, Composites

Gram-scale Y-doped ZnO and PVDF electrospun film for piezoelectric nanogenerators

Juan Yi et al.

Summary: With the demand for green energy increasing, piezoelectric nanogenerators (PENGs) are being developed for the next generation of wearable energy supply. This study focused on the preparation of Y-doped ZnO and PVDF, and the application of electrospun films in PENGs. Results showed that increasing the amount of Y-ZnO and enhancing the alignment of PVDF can improve the piezoelectric output, with the 15 Y-Z PENG showing promising performance under different loads.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Article Chemistry, Physical

High-performance nanogenerators based on flexible cellulose nanofibril/MoS2 nanosheet composite piezoelectric films for energy harvesting

Tao Wu et al.

Summary: The environmentally friendly TOCN/MoS2 nanocomposite piezoelectric films exhibited excellent mechanical and piezoelectric properties, making them suitable for nanogenerator applications. These films are capable of harvesting mechanical energy in the natural environment and storing electrical energy, demonstrating a promising potential for various applications.

NANO ENERGY (2021)

Article Engineering, Multidisciplinary

Kinetic motion sensors based on flexible and lead-free hybrid piezoelectric composite energy harvesters with nanowires-embedded electrodes for detecting articular movements

Seong Su Ham et al.

Summary: This study developed a ceramic-polymer hybrid lead-free piezoelectric composite material that can generate voltage and current under mechanical bending deformations, resulting in flexible energy harvesters and kinetic motion sensing gloves. The advantages of the P(VDF-TrFE) matrix for piezoelectric composite-based devices were validated, and stable and reliable self-powered kinetic motion sensors were successfully fabricated for monitoring biomechanical motions. The hybrid lead-free piezoelectric composite shows promise for future low-power electronic motion detection applications.

COMPOSITES PART B-ENGINEERING (2021)

Article Engineering, Electrical & Electronic

Enhanced piezoelectric performance of PVDF-based electrospun nanofibers by utilizing in situ synthesized graphene-ZnO nanocomposites

Mahdi Hasanzadeh et al.

Summary: The study synthesized graphene-zinc oxide nanocomposite for use in electrospun PVDF nanofibers, resulting in uniform, bead-free nanofibers with improved piezoelectric properties. The addition of synthesized G-ZnO nanocomposite decreased nanofiber diameter and increased the crystalline and polar beta phase of PVDF nanofibers, leading to superior peak-to-peak voltage compared to pristine PVDF and PVDF/ZnO nanofibers. These findings offer new insights for the development of flexible piezoelectric nanofibrous devices and energy harvesting systems.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2021)

Article Materials Science, Paper & Wood

Flexible and environment-friendly regenerated cellulose/MoS2 nanosheet nanogenerators with high piezoelectricity and output performance

Siling Chen et al.

Summary: A flexible piezoelectric nanogenerator based on regenerated cellulose and MoS2 nanosheets was developed, showing high output voltage and current. It has great potential applications in energy harvesting and sensors, with significant importance in environmental protection.

CELLULOSE (2021)

Article Materials Science, Multidisciplinary

Achieving high-performance energy harvesting and self-powered sensing in a flexible cellulose nanofibril/MoS2/BaTiO3 composite piezoelectric nanogenerator

Menghan Xu et al.

Summary: In this study, a composite piezoelectric film composed of TOCN/MoS2/BaTiO3 was successfully prepared, showing excellent mechanical and piezoelectric properties. This provides new insights for the development of efficient mechanical energy harvesters, active sensor networks, and wearable electronic devices.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

Review Materials Science, Multidisciplinary

Degradable piezoelectric biomaterials for wearable and implantable bioelectronics

Jun Li et al.

CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2020)

Article Multidisciplinary Sciences

Biodegradable nanofiber-based piezoelectric transducer

Eli J. Curry et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2020)

Article Multidisciplinary Sciences

Fabrication of piezoelectric poly(l-lactic acid)/BaTiO3 fibre by the melt-spinning process

Hyun Ju Oh et al.

SCIENTIFIC REPORTS (2020)

Article Materials Science, Multidisciplinary

Highly Sensitive P(VDF-TrFE)/BTO Nanofiber-Based Pressure Sensor with Dense Stress Concentration Microstructures

Xiaohe Hu et al.

ACS APPLIED POLYMER MATERIALS (2020)

Review Chemistry, Multidisciplinary

Piezoelectric Biomaterials for Sensors and Actuators

Meysam T. Chorsi et al.

ADVANCED MATERIALS (2019)

Article Engineering, Environmental

Biocompatibility, biodegradation and excretion of polylactic acid (PLA) in medical implants and theranostic systems

Dana da Silva et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Article Multidisciplinary Sciences

Biodegradable Piezoelectric Force Sensor

Eli J. Curry et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2018)

Article Engineering, Multidisciplinary

Analysis of Bone Remodeling Under Piezoelectricity Effects Using Boundary Elements

Miguel Cerrolaza et al.

JOURNAL OF BIONIC ENGINEERING (2017)

Article Engineering, Electrical & Electronic

Electrospinning poly(L-lactic acid) piezoelectric ordered porous nanofibers for strain sensing and energy harvesting

Jianxiong Zhu et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2017)

Article Materials Science, Multidisciplinary

Electrospun Poly(l-Lactic Acid) Nanofibers for Nanogenerator and Diagnostic Sensor Applications

Gengrui Zhao et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2017)

Article Nanoscience & Nanotechnology

Direct observation of shear piezoelectricity in poly-L-lactic acid nanowires

Michael Smith et al.

APL MATERIALS (2017)

Article Green & Sustainable Science & Technology

A Poly(L-Lactic Acid) Polymer-Based Thermally Stable Cantilever for Vibration Energy Harvesting Applications

Chunlin Zhao et al.

ADVANCED SUSTAINABLE SYSTEMS (2017)

Article Engineering, Electrical & Electronic

Design of piezoelectric microtransducers based on the topology optimization method

David Ruiz et al.

MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2016)

Article Chemistry, Multidisciplinary

Flexible Capacitive Tactile Sensor Based on Micropatterned Dielectric Layer

Tie Li et al.

SMALL (2016)

Article Polymer Science

Fabrication of composite PVDF-ZnO nanofiber mats by electrospinning for energy scavenging application with enhanced efficiency

Mohammad Sajad Sorayani Bafqi et al.

JOURNAL OF POLYMER RESEARCH (2015)

Article Materials Science, Multidisciplinary

Piezoelectric properties of electrospun poly(L-lactic acid) nanofiber web

Sol Jee Lee et al.

MATERIALS LETTERS (2015)

Review Polymer Science

Crystalline polymorphism in poly(vinylidenefluoride) membranes

Zhaoliang Cui et al.

PROGRESS IN POLYMER SCIENCE (2015)

Article Chemistry, Multidisciplinary

Performance Optimization of Vertical Nanowire- based Piezoelectric Nanogenerators

Ronan Hinchet et al.

ADVANCED FUNCTIONAL MATERIALS (2014)

Article Chemistry, Multidisciplinary

Large-Area and Flexible Lead-Free Nanocomposite Generator Using Alkaline Niobate Particles and Metal Nanorod Filler

Chang Kyu Jeong et al.

ADVANCED FUNCTIONAL MATERIALS (2014)

Article Physics, Applied

High piezoelectric performance of poly(lactic acid) film manufactured by solid-state extrusion

Mitsunobu Yoshida et al.

JAPANESE JOURNAL OF APPLIED PHYSICS (2014)

Article Multidisciplinary Sciences

Solution-processed, high-performance light-emitting diodes based on quantum dots

Xingliang Dai et al.

NATURE (2014)

Article Medicine, Research & Experimental

Biomedical Applications of Zinc Oxide Nanomaterials

Y. Zhang et al.

CURRENT MOLECULAR MEDICINE (2013)

Article Chemistry, Multidisciplinary

Measurement techniques for piezoelectric nanogenerators

Joe Briscoe et al.

ENERGY & ENVIRONMENTAL SCIENCE (2013)

Article Physics, Applied

Pressure-Sensitive Touch Panel Based on Piezoelectric Poly(L-lactic acid) Film

Masamichi Ando et al.

JAPANESE JOURNAL OF APPLIED PHYSICS (2013)

Article Materials Science, Multidisciplinary

Local piezoelectric activity of single poly(L-lactic acid) (PLLA) microfibers

V. Sencadas et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2012)

Article Chemistry, Multidisciplinary

Functional Electrical Stimulation by Nanogenerator with 58 V Output Voltage

Guang Zhu et al.

NANO LETTERS (2012)

Article Engineering, Multidisciplinary

Analysis of the Effects of Solution Conductivity on Electrospinning Process and Fiber Morphology

Chitral J. Angammana et al.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2011)

Article Materials Science, Multidisciplinary

Tailoring the morphology and crystallinity of poly(L-lactide acid) electrospun membranes

Clarisse Ribeiro et al.

SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2011)

Article Polymer Science

New design of actuator using shear piezoelectricity of a chiral polymer, and prototype device

Michiya Sawano et al.

POLYMER INTERNATIONAL (2010)

Review Materials Science, Multidisciplinary

ZnO nanowire and nanobelt platform for nanotechnology

Zhong Lin Wang

MATERIALS SCIENCE & ENGINEERING R-REPORTS (2009)

Article Engineering, Environmental

The effect of nanoclays on the properties of PLLA-modified polymers part 1: Mechanical and thermal properties

D. Lewitus et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2006)

Review Physics, Condensed Matter

Zinc oxide nanostructures: growth, properties and applications

ZL Wang

JOURNAL OF PHYSICS-CONDENSED MATTER (2004)

Article Polymer Science

A spectroscopic analysis of poly(lactic acid) structure

SH Kang et al.

MACROMOLECULES (2001)

Article Acoustics

History and recent progress in piezoelectric polymers

E Fukada

IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL (2000)