4.7 Article

Experimental and numerical studies on the axial compression performance of hexagonal stiffened CFDST stub columns

Related references

Note: Only part of the references are listed.
Article Construction & Building Technology

Mechanical Performance of Circular Ultrahigh-Performance Concrete-Filled Double Skin High-Strength Steel Tubular Stub Columns under Axial Compression

Bo Yang et al.

Summary: This paper proposes a new type of stiffened circular ultra-high performance concrete-filled double skin steel tubular column, which efficiently delays the local buckling of steel tubes and enhances the integral of the section. Experimental tests and finite element analysis were conducted, and a calculation method was proposed to reasonably predict the column's bearing capacity.

JOURNAL OF STRUCTURAL ENGINEERING (2022)

Article Energy & Fuels

The effect of resin uptake on the flexural properties of compression molded sandwich composites

Dongyang Cao et al.

Summary: The study highlights the importance of resin uptake in determining the flexural properties of sandwich composites used in wind turbine blades. It is found that different resin uptake levels can significantly impact the specific flexural strength and modulus of the composite materials. Additionally, the findings suggest that the failure mode of the sandwich composites is influenced by the core stiffness and surface texture, with different types of cores exhibiting different failure mechanisms.

WIND ENERGY (2022)

Article Mechanics

Nanoindentation measurement of core-skin interphase viscoelastic properties in a sandwich glass composite

Dongyang Cao et al.

Summary: The study characterized the viscoelastic properties at the interphase region between the composite skin and core in core sandwich composites using nanoindentation, revealing a change in mechanical properties from the composite skin to the core.

MECHANICS OF TIME-DEPENDENT MATERIALS (2021)

Article Mechanics

Seismic performance of rectangular ultra-high performance concrete filled steel tube (UHPCFST) columns

Heng Cai et al.

Summary: This paper investigates the seismic performance of rectangular UHPCFST columns under combined axial compression and lateral loading, showing good deformation capacity and energy dissipation ability. The use of thick-walled steel tube can delay stiffness and strength degradation of UHPCFST columns, providing reinforcement for the core UHPC.

COMPOSITE STRUCTURES (2021)

Article Engineering, Civil

Experimental study on circular steel tube-confined reinforced UHPC columns under axial loading

Jiangang Wei et al.

Summary: This study investigates the compressive behavior of circular steel tube-confined reinforced ultra high-performance concrete columns through experiments. The addition of steel fibers significantly improves the strength and ductility of the columns. A new formula for predicting the bearing capacity of STCRU columns is provided, overcoming limitations of existing specifications.

ENGINEERING STRUCTURES (2021)

Article Construction & Building Technology

Tests and analysis on circular UHPFRC-filled steel tubular stub columns under eccentric compression

Jia-Bao Yan et al.

Summary: This study focused on the eccentric-compression behaviors of circular ultra-high performance fiber-reinforced concrete-filled steel tubular stub columns, finding that the ductility of the columns is significantly improved by using thick steel tubes. Additionally, the code equations in EC4, AISC, and GB50936 were found to be conservative in predicting the N-u-M-u interaction curves of the columns, as they neglect the tensile strength of the concrete.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2021)

Article Mechanics

A novel analysis-oriented theoretical model for steel tube con fi ned ultra-high performance concrete

Qiuru Lu et al.

Summary: This paper presents a newly developed theoretical model for steel tube confined UHPC, verified with experimental data. The impact on the confined UHPC follows an order of steel tube thickness > UHPC compressive strength > steel yield strength. The pre-peak axial stress-strain behavior is primarily determined by the UHPC compressive strength, while the post-peak behavior varies with both UHPC compressive strength and steel tube thickness.

COMPOSITE STRUCTURES (2021)

Review Engineering, Civil

Stiffened concrete-filled steel tubes: A systematic review

Faesal Alatshan et al.

THIN-WALLED STRUCTURES (2020)

Article Engineering, Civil

Buckling behavior of circular steel tubes infilled with C170/185 ultra-high-strength concrete under fire

Ming-Xiang Xiong et al.

ENGINEERING STRUCTURES (2020)

Article Construction & Building Technology

Behavior of octagonal concrete-filled double-skin steel tube stub columns under axial compression

Shagea Alqawzai et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2020)

Article Construction & Building Technology

Axial compressive behavior of reactive powder concrete-filled circular steel tube stub columns

Qiuwei Wang et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2019)

Article Engineering, Civil

Experimental study on structural performance of UHPC and UHPFRC columns confined with steel tube

An Le Hoang et al.

ENGINEERING STRUCTURES (2019)

Article Engineering, Civil

Local and post-local buckling of normal/high strength steel sections with concrete infill

Yuchen Song et al.

THIN-WALLED STRUCTURES (2019)

Article Construction & Building Technology

Axial behavior of ultra-high performance concrete (UHPC) filled stocky steel tubes with square sections

Yanxiang Yan et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2019)

Article Engineering, Civil

Uni-axial behaviour of externally confined UHSCFST columns

M. H. Lai et al.

THIN-WALLED STRUCTURES (2019)

Article Engineering, Civil

Finite element simulation of circular short CFDST columns under axial compression

M. Elchalakani et al.

STRUCTURES (2019)

Article Construction & Building Technology

Cyclic behavior of UHPFRC under compression

Pablo Augusto Krahl et al.

CEMENT & CONCRETE COMPOSITES (2019)

Article Construction & Building Technology

Improved Composite Effect of Square Concrete-Filled Steel Tubes with Diagonal Binding Ribs

Zheng Zhou et al.

JOURNAL OF STRUCTURAL ENGINEERING (2019)

Article Construction & Building Technology

Experimental Study of Square and Rectangular CFDST Sections with Stainless Steel Outer Tubes under Axial Compression

Fangying Wang et al.

JOURNAL OF STRUCTURAL ENGINEERING (2019)

Article Engineering, Civil

Structural behavior of UHPC filled steel tube columns under axial loading

Shiming Chen et al.

THIN-WALLED STRUCTURES (2018)

Article Construction & Building Technology

Durability of ultra-high performance concrete in tension under cold weather conditions

Zhidong Zhou et al.

CEMENT & CONCRETE COMPOSITES (2018)

Article Materials Science, Multidisciplinary

Experimental study on the mechanical behavior of RPC filled square steel tube columns subjected to eccentric compression

Wenxiu Hao et al.

FRATTURA ED INTEGRITA STRUTTURALE (2018)

Article Engineering, Civil

Axial performance of short concrete filled steel tubes with high- and ultra-high-strength materials

Ming-Xiang Xiong et al.

ENGINEERING STRUCTURES (2017)

Review Engineering, Civil

A review and analysis of circular UHPC filled steel tube columns under axial loading

An Le Hoang et al.

STRUCTURAL ENGINEERING AND MECHANICS (2017)

Article Construction & Building Technology

Behaviour of steel tubular members infilled with ultra high strength concrete

Ming-Xiang Xiong et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2017)

Article Construction & Building Technology

Performance of hexagonal CFST members under axial compression and bending

Wu Xu et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2016)

Article Engineering, Civil

Composite action of hexagonal concrete-filled steel tubular stub columns under axial loading

Fa-xing Ding et al.

THIN-WALLED STRUCTURES (2016)

Article Construction & Building Technology

Developments and advanced applications of concrete-filled steel tubular (CFST) structures: Members

Lin-Hai Han et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2014)

Article Construction & Building Technology

Seismic Behavior of FRP-High-Strength Concrete-Steel Double-Skin Tubular Columns

Togay Ozbakkaloglu et al.

JOURNAL OF STRUCTURAL ENGINEERING (2014)

Article Engineering, Civil

Structural behavior of concrete filled steel tubular sections (CFT/CFSt) under axial compression

Burak Evirgen et al.

THIN-WALLED STRUCTURES (2014)

Article Construction & Building Technology

Influence of ultra-high strength infill in slender concrete-filled steel tubular columns

J. M. Portoles et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2013)

Article Construction & Building Technology

Finite element modelling of concrete-filled steel stub columns under axial compression

Zhong Tao et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2013)

Article Construction & Building Technology

Local buckling and concrete confinement of concrete-filled box columns under axial load

Cheng-Cheng Chen et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2012)

Article Construction & Building Technology

Local buckling of steel plates in concrete-filled thin-walled steel tubular beam-columns

Qing Quan Liang et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2007)

Article Engineering, Civil

Performance of concrete-filled thin-walled steel tubes under pure torsion

Lin-Hai Han et al.

THIN-WALLED STRUCTURES (2007)

Article Construction & Building Technology

Behaviour of concrete-filled double skin rectangular steel tubular beam-columns

Zhong Tao et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2006)

Article Construction & Building Technology

Development of the mechanical properties of an ultra-high performance fiber reinforced concrete (UHPFRC)

Katrin Habel et al.

CEMENT AND CONCRETE RESEARCH (2006)

Article Engineering, Civil

Corner properties of cold-formed steel sections at elevated temperatures

Ju Chen et al.

THIN-WALLED STRUCTURES (2006)

Article Construction & Building Technology

Behavior of centrally loaded concrete-filled steel-tube short columns

K Sakino et al.

JOURNAL OF STRUCTURAL ENGINEERING-ASCE (2004)