☆ 4.5 Review

Recent Research Progress of n-Type Conjugated Polymer Acceptors and All-Polymer Solar Cells

CHINESE JOURNAL OF POLYMER SCIENCE (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

Simultaneous Optimization of Efficiency, Stretchability, and Stability in All-Polymer Solar Cells via Aggregation Control

Kaihu Xian et al.

Summary: By suppressing the aggregation and crystallization behaviors of polymerized Y-series acceptors, the performance, stability, and mechanical robustness of all-polymer solar cells were simultaneously improved. The optimized ternary all-polymer blend exhibited high photovoltaic efficiency and improved mechanical flexibility.

CHINESE JOURNAL OF CHEMISTRY (2023)

Add to Collection

Article Chemistry, Multidisciplinary

17.87% Efficiency All-Polymer Tandem Solar Cell Enabled by Complementary Absorbing Polymer Acceptors

Qing Ma et al.

Summary: In this study, highly efficient tandem all-polymer solar cells were successfully fabricated using two polymerized small molecular acceptors and rational device optimizations. The tandem all-PSCs achieved high power conversion efficiency and open circuit voltage, and demonstrated excellent thermal and light-soaking stability.

ADVANCED FUNCTIONAL MATERIALS (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Polymerized Small Molecular Acceptor with Branched Side Chains for All Polymer Solar Cells with Efficiency over 16.7%

Yun Li et al.

Summary: This study successfully achieved efficient all-polymer solar cells by designing and synthesizing a series of polymer acceptors. Through the investigation of the structure-property relationship of polymer acceptors, new insights into polymer acceptors were provided, and a feasible approach to develop efficient conjugated polymer acceptors was paved.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

16.3% Efficiency binary all-polymer solar cells enabled by a novel polymer acceptor with an asymmetrical selenophene-fused backbone

Huiting Fu et al.

Summary: A novel polymer acceptor, PYT-1S1Se, designed with an asymmetrical selenophene-fused framework, has been shown to optimize optical absorption and electronic properties in all-polymer solar cells. Compared with other analogs, all-PSCs derived from PYT-1S1Se demonstrate improved J(sc) and V-oc metrics, resulting in a record-high power conversion efficiency of 16.3%.

SCIENCE CHINA-CHEMISTRY (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Perylene-diimide derived organic photovoltaic materials

Ming Zhang et al.

Summary: This review systematically summarizes the recent progress on photovoltaic materials based on perylene-diimides (PDIs), including the explanation of design strategies for modification of the parent PDI units towards their application as acceptors and cathode interlayers in devices. Common features in the design of tailor-made PDI-based photovoltaic materials are discussed, along with highlighting the challenges and opportunities in improving device performance in the future.

SCIENCE CHINA-CHEMISTRY (2022)

Add to Collection

Article Chemistry, Multidisciplinary

A Vinylene-Linker-Based Polymer Acceptor Featuring a Coplanar and Rigid Molecular Conformation Enables High-Performance All-Polymer Solar Cells with Over 17% Efficiency

Han Yu et al.

Summary: This study reports a high-performance polymer acceptor based on vinylene linkers, which exhibit a more coplanar and rigid molecular conformation compared to traditional thiophene-based acceptors. This leads to higher mobility and reduced energetic disorder. Furthermore, the blend based on this polymer acceptor demonstrates high domain purity, resulting in a better fill factor in all-polymer solar cells.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

16.52% Efficiency All-Polymer Solar Cells with High Tolerance of the Photoactive Layer Thickness

Wenqing Zhang et al.

Summary: In this study, a third polymer donor, PTQ10, was introduced to finely tune the energy-level matching and microscopic morphology of the polymer blend photoactive layer in all-polymer solar cells (all-PSCs). The addition of PTQ10 improved the charge separation and transport efficiency, resulting in a high power conversion efficiency (PCE) of 16.52%. Furthermore, the all-PSCs exhibited a high tolerance of the photoactive layer thickness, achieving high PCEs of 15.27% and 13.91% at thick photoactive layer thicknesses, which are the highest reported for all-PSCs.

ADVANCED MATERIALS (2022)

Add to Collection

Article Engineering, Environmental

Cost-Efficiency balanced polymer acceptors based on lowly fused Dithienopyrrolo[3, 2b]benzothiadiazole for 16.04% efficiency All-Polymer solar cells

Chentong Liao et al.

Summary: Due to their outstanding thermal stability and mechanical properties, All-polymer solar cells (All-PSCs) have attracted increasing attention. However, the prevailing polymer acceptors BTTP-based polymers, have limitations in terms of energy levels and figure of merit (FOM) which restricts the selection of donor polymers. Therefore, the development of low-cost BTP-based polymer acceptors has significant importance.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Polymer Science

A Near-Infrared Polymer Acceptor Enables over 15% Efficiency for All-Polymer Solar Cells

Tao Wang et al.

Summary: In this study, a fused-aromatic-ring-constructed near-infrared polymer acceptor PYT-Tz was designed and synthesized, and high-performance all-polymer solar cells were achieved by blending PYT-Tz with PBDB-T. Compared with traditional materials, PYT-Tz exhibited stronger absorption, higher electron mobility, and ordered molecular packing, leading to efficient hole injection and reduced non-radiative recombination loss. This research is of great importance for the development of high-performance all-polymer solar cells.

CHINESE JOURNAL OF POLYMER SCIENCE (2022)

Add to Collection

Article Chemistry, Multidisciplinary

A-π-A structured non-fullerene acceptors for stable organic solar cells with efficiency over 17%

Wei Liu et al.

Summary: This study proposes a new design strategy for organic solar cell electron acceptors and successfully develops a quasi-macromolecule with an A-π-A structure. This quasi-macromolecule improves the long-term stability and power conversion efficiency of organic solar cells, and possesses synthetic flexibility and high molecular weight.

SCIENCE CHINA-CHEMISTRY (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Recent progress in organic solar cells (Part II device engineering)

Yahui Liu et al.

Summary: This review examines the rapid development of organic solar cells and highlights the importance of device engineering in achieving high power conversion efficiency. The challenges, problems, and future developments in this field are also discussed.

SCIENCE CHINA-CHEMISTRY (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Chlorinated polymerized small molecule acceptor enabling ternary all-polymer solar cells with over 16.6% efficiency

Ke Hu et al.

Summary: A new small-molecule acceptor-based polymerized solar cell (PYCl-T) with high efficiency and thermal stability was designed and synthesized using a ternary blending system.

SCIENCE CHINA-CHEMISTRY (2022)

Add to Collection

Article Chemistry, Multidisciplinary

A New Polymer Donor Enables Binary All-Polymer Organic Photovoltaic Cells with 18% Efficiency and Excellent Mechanical Robustness

Jingwen Wang et al.

Summary: The development of polymerized small-molecule acceptors has improved the power conversion efficiencies (PCEs) of all-polymer organic photovoltaic (OPV) cells. However, suitable polymer donors for all-polymer OPV cells are still lacking. In this study, a new polymer donor named PQM-Cl is designed and its photovoltaic performance is explored.

ADVANCED MATERIALS (2022)

Add to Collection

Article Polymer Science

15% Efficiency All-Polymer Solar Cells Based on a Polymer Acceptor Containing B←N Unit

Ying-Ze Zhang et al.

Summary: The development of new polymer acceptors is crucial for improving the power conversion efficiency of all polymer solar cells. In this study, a new polymer acceptor called PBN26 was developed, and it achieved a PCE of 15.09%, which is the highest among all-PSCs based on B <- N-based polymer acceptors at present.

CHINESE JOURNAL OF POLYMER SCIENCE (2022)

Add to Collection

Article Polymer Science

Planarized Polymer Acceptor Featuring High Electron Mobility for Efficient All-Polymer Solar Cells

Feng Liu et al.

Summary: Significant progress has been made in all-polymer solar cells (APSCs) by using polymerized small molecular acceptors (PSMAs). In this study, a high electron mobility polymer acceptor PSV was designed and synthesized, which exhibited excellent performance in APSCs. The results highlight the importance of developing polymer acceptors with high electron mobility for improving the performance of APSCs.

CHINESE JOURNAL OF POLYMER SCIENCE (2022)

Add to Collection

Article Multidisciplinary Sciences

High performance polymerized small molecule acceptor by synergistic optimization on π-bridge linker and side chain

Guangpei Sun et al.

Summary: The modification of small molecule acceptor building block and the pi-bridge linker is an effective strategy to improve the photovoltaic performance of polymer acceptors. In this work, a new polymer acceptor PG-IT2F was synthesized with improved power conversion efficiency in polymer solar cells.

NATURE COMMUNICATIONS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Achieving high efficiency and well-kept ductility in ternary all-polymer organic photovoltaic blends thanks to two well miscible donors

Ruijie Ma et al.

Summary: All-polymer solar cells (APSCs) are a promising application-oriented photovoltaic technology that offers operational and mechanical stability. However, their low power conversion efficiency has limited their competitiveness compared to other types of solar cells. In this study, we achieved improved performance of APSCs by enhancing energy transfer, tuning crystallinity, and improving phase separation, leading to faster charge transfer, balanced charge transport, suppressed exciton recombination, and more efficient charge extraction. The study also highlighted the importance of good miscibility between polymer donors in maintaining film morphology and ductility.

MATTER (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Polymerized Small-Molecule Acceptors for High-Performance All-Polymer Solar Cells

Zhi-Guo Zhang et al.

Summary: All-polymer solar cells have attracted significant research interest due to their good film formation, stable morphology, and mechanical flexibility. The strategy of polymerizing small-molecule acceptors to construct new-generation polymer acceptors has significantly increased the power conversion efficiency, but current challenges and future prospects still need to be addressed.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Polymer Science

Benzotriazole Based 2D-conjugated Polymer Donors for High Performance Polymer Solar Cells

Zhi-Guo Zhang et al.

Summary: The J-series polymers are a type of two-dimensional conjugated polymers with medium energy bandgap and strong absorption characteristics, exhibiting ordered crystalline structures and high hole mobilities, with energy levels tunable depending on structural variations.

CHINESE JOURNAL OF POLYMER SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Introducing Electron-Withdrawing Linking Units and Thiophene π-Bridges into Polymerized Small Molecule Acceptors for High-Efficiency All-Polymer Solar Cells

Liuyang Zhou et al.

Summary: The study demonstrates that introducing weak electron-withdrawing A-units and thiophene pi-bridges can enhance the performance of all-polymer solar cells by synthesizing a series of narrow bandgap polymer acceptors.

CHEMISTRY OF MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

High Efficiency (15.8%) All-Polymer Solar Cells Enabled by a Regioregular Narrow Bandgap Polymer Acceptor

Huiting Fu et al.

Summary: A new class of narrow-bandgap polymer acceptors, the PZT series, was developed to address challenges in all-polymer solar cells, resulting in improved performance due to red-shifted optical absorption and up-shifted energy levels. The regioregular PZT-gamma was specifically designed to avoid isomer formation during polymerization, leading to enhanced efficiency, short-circuit current density, and energy loss in all-PSCs.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Improving photovoltaic parameters of all-polymer solar cells through integrating two polymeric donors

Kang An et al.

Summary: The incorporation of the wide-bandgap polymer donor PM6 into all-polymer solar cells has been shown to enhance photovoltaic parameters and reduce non-radiative recombination energy loss, leading to improved device efficiency. The optimized ternary blend devices exhibit impressively high power conversion efficiency, indicating the great potential of these all-polymer solar cells for potential applications.

SCIENCE CHINA-CHEMISTRY (2021)

Add to Collection

Article Chemistry, Physical

16% efficiency all-polymer organic solar cells enabled by a finely tuned morphology via the design of ternary blend

Tao Liu et al.

Summary: The performance of all-polymer organic solar cells has been improved by introducing a small amount of BN-T, resulting in increased crystallinity and enhanced exciton harvesting and charge transport. This enhancement is attributed to the reduced nonradiative energy loss and improved energy and charge transfer between acceptors, making AP-OSCs potentially as efficient as devices based on small molecule acceptors.

JOULE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Configurational Isomers Induced Significant Difference in All-Polymer Solar Cells

Hengtao Wang et al.

Summary: The design and synthesis of polymer acceptors play a crucial role in the performance of all-polymer solar cells. By separating and controlling the monomer configuration, two isomeric polymeric acceptors were produced, with the gamma-based polymer showing the highest power conversion efficiency. The results demonstrate that configurational control is a promising strategy for achieving high-performance polymer acceptors.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

A Difluoro-Monobromo End Group Enables High-Performance Polymer Acceptor and Efficient All-Polymer Solar Cells Processable with Green Solvent under Ambient Condition

Han Yu et al.

Summary: This study successfully increased the efficiency of all-polymer solar cells to 15.22% by designing and synthesizing a new polymer acceptor PY2F-T, demonstrating the effectiveness of fluorination strategy in improving photon absorption and charge mobility. Additionally, devices based on PY2F-T showed smaller domain spacing and higher domain purity, effectively suppressing charge recombination.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Multi-Selenophene-Containing Narrow Bandgap Polymer Acceptors for All-Polymer Solar Cells with over 15 % Efficiency and High Reproducibility

Qunping Fan et al.

Summary: The newly developed multi-selenophene-containing PSMA material PFY-3Se shows outstanding performance in all-polymer solar cells, with high efficiency, low energy loss, and good batch-to-batch reproducibility, indicating great potential for practical applications.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Chemistry, Physical

Achieving over 17% efficiency of ternary all-polymer solar cells with two well-compatible polymer acceptors

Rui Sun et al.

Summary: The study focuses on developing high-performance all-polymer solar cells by designing a novel polymer acceptor PY2F-T and enhancing efficiency through ternary blend with PYT in the PM6: PY2F-T host system. This approach significantly improves power conversion efficiency and stability, marking a promising future for the application of all-PSCs.

JOULE (2021)

Add to Collection

Article Polymer Science

Bending-stability Interfacial Layer as Dual Electron Transport Layer for Flexible Organic Photovoltaics

Guodong Xu et al.

Summary: This study explores a novel bendable composite, successfully applied as an electron transport layer for fully-flexible OPVs, showing better device performances and mechanical properties.

CHINESE JOURNAL OF POLYMER SCIENCE (2021)

Add to Collection

Article Energy & Fuels

Ternary All-Polymer Solar Cells with Two Synergetic Donors Enable Efficiency over 14.5%

Ke Hu et al.

Summary: The introduction of the low-cost polymer donor PTQ10 into the PBDBT:PTPBT-ET0.1 system resulted in the formation of a ternary all-polymer solar cell with improved power conversion efficiency and excellent performance in light absorption and compatibility.

ENERGY & FUELS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

High-performance all-polymer solar cells enabled by a novel low bandgap non-fully conjugated polymer acceptor

Qunping Fan et al.

Summary: A novel non-fully conjugated polymer acceptor PFY-2TS with a low bandgap was developed and showed improved performance in all-polymer solar cells with a PCE of 12.31% and reduced energy loss. This study demonstrated that non-fully conjugated polymers as a new class of acceptor materials are very promising for the development of high-performance all-polymer solar cells.

SCIENCE CHINA-CHEMISTRY (2021)

Add to Collection

Article Multidisciplinary Sciences

Polymerized small molecular acceptor based all-polymer solar cells with an efficiency of 16.16% via tuning polymer blend morphology by molecular design

Jiaqi Du et al.

Summary: Recent advancements have been made in all-polymer solar cells (all-PSCs) based on polymerized small molecular acceptors (PSMAs). Two new A-DA'D-A small molecule acceptor based PSMAs, PS-Se and PN-Se, were synthesized to study the impact of molecular structure on photovoltaic performance. Cryogenic transmission electron microscopy and photoinduced force microscopy revealed the aggregation behavior and morphology of the polymer and acceptor blend films, leading to higher power conversion efficiency in all-PSCs.

NATURE COMMUNICATIONS (2021)

Add to Collection

Review Engineering, Electrical & Electronic

Large-area flexible organic solar cells

Fu Yang et al.

Summary: There are two major challenges to bridging the efficiency gap between small-area rigid organic solar cells (OSCs) and large-area flexible devices: first is preparing high-quality flexible transparent electrodes, and second is fabricating thickness-insensitive photoactive layers with low-cost materials. This review summarizes recent progress and challenges of flexible large-area OSCs and proposes strategies and opportunities to promote their development for stable and efficient performance.

NPJ FLEXIBLE ELECTRONICS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Ternary All-Polymer Solar Cells With 8.5% Power Conversion Efficiency and Excellent Thermal Stability

Xi Liu et al.

FRONTIERS IN CHEMISTRY (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Polymer Acceptors Containing B←N Units for Organic Photovoltaics

Ruyan Zhao et al.

ACCOUNTS OF CHEMICAL RESEARCH (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Toward Efficient All-Polymer Solar Cells via Halogenation on Polymer Acceptors

Yuxiang Li et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Physical

14.4% efficiency all-polymer solar cell with broad absorption and low energy loss enabled by a novel polymer acceptor

Tao Jia et al.

NANO ENERGY (2020)

Add to Collection

Article Chemistry, Physical

Highly Efficient All-Polymer Solar Cells Enabled by p-Doping of the Polymer Donor

Xiaopeng Xu et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Chemistry, Physical

Controlling Molecular Mass of Low-Band-Gap Polymer Acceptors for High-Performance All-Polymer Solar Cells

Wei Wang et al.

JOULE (2020)

Add to Collection

Article Chemistry, Multidisciplinary

A Narrow-Bandgap n-Type Polymer with an Acceptor-Acceptor Backbone Enabling Efficient All-Polymer Solar Cells

Huiliang Sun et al.

ADVANCED MATERIALS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

A-DA'D-A non-fullerene acceptors for high-performance organic solar cells

Qingya Wei et al.

SCIENCE CHINA-CHEMISTRY (2020)

Add to Collection

Article Chemistry, Physical

All-Polymer Solar Cells with over 12% Efficiency and a Small Voltage Loss Enabled by a Polymer Acceptor Based on an Extended Fused Ring Core

Huatong Yao et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Improving the all-polymer solar cell performance by adding a narrow bandgap polymer as the second donor

Kai Wang et al.

RSC ADVANCES (2020)

Add to Collection

Article Chemistry, Physical

A Universal Fluorinated Polymer Acceptor Enables All-Polymer Solar Cells with >15% Efficiency

Feng Peng et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Over 14% efficiency all-polymer solar cells enabled by a low bandgap polymer acceptor with low energy loss and efficient charge separation

Qunping Fan et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Precisely Controlling the Position of Bromine on the End Group Enables Well-Regular Polymer Acceptors for All-Polymer Solar Cells with Efficiencies over 15%

Zhenghui Luo et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

11.2% Efficiency all-polymer solar cells with high open-circuit voltage

Yuan Meng et al.

SCIENCE CHINA-CHEMISTRY (2019)

Add to Collection

Article Polymer Science

Vertical Distribution to Optimize Active Layer Morphology for Efficient All-Polymer Solar Cells by J71 as a Compatibilizer

Siqi Liu et al.

MACROMOLECULES (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Efficient Nonhalogenated Solvent-Processed Ternary All-Polymer Solar Cells with a Favorable Morphology Enabled by Two Well-Compatible Donors

Qiang Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Polymer Science

π-π Stacking Distance and Phase Separation Controlled Efficiency in Stable All-Polymer Solar Cells

Ke Zhou et al.

POLYMERS (2019)

Add to Collection

Article Chemistry, Physical

Morphology optimization via molecular weight tuning of donor polymer enables all-polymer solar cells with simultaneously improved performance and stability

Zhenye Li et al.

NANO ENERGY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

A chlorinated polymer promoted analogue co-donors for efficient ternary all-polymer solar cells

Hui Chen et al.

SCIENCE CHINA-CHEMISTRY (2019)

Add to Collection

Article Chemistry, Physical

Efficient All-Polymer Solar Cells based on a New Polymer Acceptor Achieving 10.3% Power Conversion Efficiency

Huatong Yao et al.

ACS ENERGY LETTERS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

High-Performance All-Polymer Solar Cells Enabled by an n-Type Polymer Based on a Fluorinated Imide-Functionalized Arene

Huiliang Sun et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Single-Junction Organic Solar Cell with over 15% Efficiency Using Fused-Ring Acceptor with Electron-Deficient Core

Jun Yuan et al.

JOULE (2019)

Add to Collection

Review Chemistry, Physical

Flexible and Semitransparent Organic Solar Cells

Yaowen Li et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Side-chain modification of polyethylene glycol on conjugated polymers for ternary blend all-polymer solar cells with efficiency up to 9.27%

Zhenye Li et al.

SCIENCE CHINA-CHEMISTRY (2018)

Add to Collection

Article Chemistry, Physical

Improved Tandem All-Polymer Solar Cells Performance by Using Spectrally Matched Subcells

Jianyu Yuan et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Designing ternary blend all-polymer solar cells with an efficiency of over 10% and a fill factor of 78%

Zhenye Li et al.

NANO ENERGY (2018)

Add to Collection

Article Chemistry, Multidisciplinary

11.2% All-Polymer Tandem Solar Cells with Simultaneously Improved Efficiency and Stability

Kai Zhang et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

9.0% power conversion efficiency from ternary all-polymer solar cells

Zhaojun Li et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Dual Forster resonance energy transfer and morphology control to boost the power conversion efficiency of all-polymer OPVs

Jiangang Liu et al.

RSC ADVANCES (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Constructing a Strongly Absorbing Low-Bandgap Polymer Acceptor for High-Performance All-Polymer Solar Cells

Zhi-Guo Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2017)

Add to Collection

Article Chemistry, Multidisciplinary

All-Polymer Solar Cells Based on Absorption-Complementary Polymer Donor and Acceptor with High Power Conversion Efficiency of 8.27%

Liang Gao et al.

ADVANCED MATERIALS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

High-performance ternary blend all-polymer solar cells with complementary absorption bands from visible to near-infrared wavelengths

Hiroaki Benten et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Add to Collection

Article Chemistry, Multidisciplinary

A Facile Planar Fused-Ring Electron Acceptor for As-Cast Polymer Solar Cells with 8.71% Efficiency

Yuze Lin et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Add to Collection

Article Chemistry, Physical

Efficient ternary blend all-polymer solar cells with a polythiophene derivative as a hole-cascade material

Wenyan Su et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Add to Collection

Article Multidisciplinary Sciences

High efficiency all-polymer tandem solar cells

Jianyu Yuan et al.

SCIENTIFIC REPORTS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

An Electron Acceptor Challenging Fullerenes for Efficient Polymer Solar Cells

Yuze Lin et al.

ADVANCED MATERIALS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Determining the Role of Polymer Molecular Weight for High-Performance All-Polymer Solar Cells: Its Effect on Polymer Aggregation and Phase Separation

Hyunbum Kang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Polymer Solar Cells with Diketopyrrolopyrrole Conjugated Polymers as the Electron Donor and Electron Acceptor

Weiwei Li et al.

ADVANCED MATERIALS (2014)

Add to Collection

Review Chemistry, Multidisciplinary

Molecular Design of Photovoltaic Materials for Polymer Solar Cells: Toward Suitable Electronic Energy Levels and Broad Absorption

Yongfang Li

ACCOUNTS OF CHEMICAL RESEARCH (2012)

Add to Collection

Article Chemistry, Physical

Fullerene derivative acceptors for high performance polymer solar cells

Youjun He et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2011)

Add to Collection

Article Multidisciplinary Sciences

A high-mobility electron-transporting polymer for printed transistors

He Yan et al.

NATURE (2009)

Add to Collection

Article Chemistry, Organic

Conjugated Polymers from Naphthalene Bisimide

Xugang Guo et al.

ORGANIC LETTERS (2008)

Add to Collection

Article Chemistry, Multidisciplinary

A high-mobility electron-transport polymer with broad absorption and its use in field-effect transistors and all-polymer solar cells

Xiaowei Zhan et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2007)

Add to Collection

© Peeref 2019-2024. All rights reserved.