☆ 4.5 Article

Research on process modeling and simulation of spent lead paste desulfurization enhanced reactor

CHINESE JOURNAL OF CHEMICAL ENGINEERING (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Chemical

Research and development of advanced structured packing in a rotating packed bed

Zhi-Guo Yuan et al.

Summary: A 3D structured packing composed of mesh and support structures was designed in this study to achieve efficient gas-liquid mixing and mass transfer. Experimental results showed that the mass transfer performance of the 3D packing was equivalent to that of wire mesh packing and better than that of pall ring packing. The pressure drop of the 3D packing was significantly lower compared to the other two packings.

CHINESE JOURNAL OF CHEMICAL ENGINEERING (2022)

Add to Collection

Article Engineering, Chemical

Effect of turbulence dispersion on bubble-particle collision efficiency

Ai Wang et al.

Summary: In this study, the bubble-particle collision efficiency in a single-bubble system was investigated for different turbulence intensities and particle sizes. An analytical model was proposed to quantify the turbulence collision efficiency and compared with a computational fluid dynamics (CFD) model. It was found that the collision efficiency and effective particle releasing radius increased with turbulence intensity and particle diameter. The CFD model showed that higher turbulence intensity resulted in increased energy dissipation rate and more stochastic particle trajectories.

MINERALS ENGINEERING (2022)

Add to Collection

Article Engineering, Chemical

Particulate flow and erosion modeling of a Pelton turbine injector using CFD-DEM simulations

Rahul Tarodiya et al.

Summary: This study focuses on the hydro-abrasive erosion of the Pelton turbine injector in sediment-laden water. Computational fluid dynamics coupled with discrete element method simulations were used to model the sediment-laden flows, considering particle rotation and collisions. A semi-empirical erosion model was developed to predict the erosion of the injector, which was calibrated with experimental data for turbine steel. The results showed that the erosion of the injector was asymmetric, and the variation in particle size played a major role in the erosion distribution. The nozzle opening conditions had a significant impact on the erosion distribution and the location of maximum erosion on the spear.

POWDER TECHNOLOGY (2022)

Add to Collection

Article Engineering, Environmental

Analysis of a more sustainable method for recycling waste lead batteries: Surface renewal promotes desulfurization agent regeneration

Yang Ma et al.

Summary: The study introduces a new closed-loop pre-desulfurization process for waste lead-acid batteries, using lime as the desulfurizer to produce sodium sulfate and regenerate sodium hydroxide. Cost analysis shows that this process is more cost-effective than traditional methods, providing a practical and economically beneficial recycling method for waste lead-acid batteries.

WASTE MANAGEMENT (2022)

Add to Collection

Article Thermodynamics

Investigations on the effect of rotational speed on the transport of air-water two-phase flows by centrifugal pumps

Michael Mansour et al.

Summary: This study presents experimental and numerical investigations on air-water flows in a centrifugal pump, focusing on the influence of rotational speed on pump performance. The results show that increasing the rpm enhances two-phase mixing and improves the pump performance.

INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2022)

Add to Collection

Article Green & Sustainable Science & Technology

A new desulfation process of spent lead paste via cyclic utilization of CO2-NH3•H2O

Chunyu Hua et al.

Summary: A new high efficiency and value-added desulfation method for spent lead paste is proposed in this study, which consists of three steps for lead recovery. The test results show that the method has high conversion rate and desulfation rate, and the regenerated ammonium carbonate filtrate can be reused, making it a green and sustainable process.

JOURNAL OF CLEANER PRODUCTION (2022)

Add to Collection

Article Engineering, Chemical

Enhancement of flocculant-aided filtration performance of coal tailings under alternating low and high shear rates

Zhimin Guo et al.

Summary: In this study, the researchers investigated the effect of alternate shear conditions on the flocculant-aided filtration performance of coal tailings. They found that sequenced flocculation produced stronger flocs compared to single shear conditions. The flocs formed under two cycles of high and low shear rates were the strongest and contained fewer particles and small flocs. Filtration experiments showed that the coal tailings had the best comprehensive filtration performance under the sequenced flocculation with two cycles of high and low shear rates. The filtration outcomes were consistent with the measurements given by FBRM and PVM.

POWDER TECHNOLOGY (2022)

Add to Collection

Article Engineering, Chemical

Design and development of high shear mixers: Fundamentals, applications and recent progress

Vikash Vashisth et al.

Summary: HSMs, as important devices, are widely used in industrial production processes such as dispersion of nanoparticles, emulsification, and mixing. The geometry of the stator has a significant impact on the uniform size distribution and energy dissipation in HSMs. Despite extensive research on hydrodynamics and mixing in HSMs, there is still a lack of specific scale-up/down criteria available.

CHEMICAL ENGINEERING SCIENCE (2021)

Add to Collection

Article Engineering, Chemical

Hydrothermal desulfurization of spent lead paste based on comproportionation reaction

Xunbo Deng et al.

Summary: The hydrothermal method was used to enhance the desulfurization reaction of PbSO4, resulting in a high desulfurization ratio under optimized conditions. The study showed that lead sulfate disseminates in lead oxide, and improving the reaction conditions can lead to better outcomes.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection

Article Engineering, Environmental

Recycling Spent Lead-Acid Batteries into Lead Halide for Resource Purification and Multifunctional Perovskite Diodes

Jiong Li et al.

Summary: This study demonstrates a simple method to recycle spent lead-acid batteries, obtaining high-purity lead iodide for the fabrication of multifunctional perovskite diodes. The cost-effective approach offers a promising solution for environmental protection and cost-saving in device fabrication, while maintaining comparable performance to using commercial lab-grade chemicals.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Engineering, Environmental

A green strategy to synthesize two-dimensional lead halide perovskite via direct recovery of spent lead-acid battery

Junxiong Wang et al.

Summary: This study successfully synthesized air-stable two-dimensional hybrid organic-inorganic perovskite crystals using a method of recovering spent lead-acid battery paste, presenting a new approach for the application of organic-inorganic perovskites in optoelectronics.

RESOURCES CONSERVATION AND RECYCLING (2021)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Computational fluid dynamics simulation of a stirred tank reactor

Gaurav Mittal et al.

Summary: This study simulated the flow field inside a stirred tank reactor using ANSYS Fluent CFD package. The simulated velocity profiles were compared with experimental data, showing good agreement in capturing the overall flow features but also revealing some discrepancies. Suggestions for further extending the work to properly evaluate the MRF technique and various turbulence models were provided.

MATERIALS TODAY-PROCEEDINGS (2021)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Facile method for preparing a nano lead powder by vacuum decomposition from spent lead-acid battery paste: leaching and desulfuration in tartaric acid and sodium tartrate mixed lixivium

Longgang Ye et al.

HYDROMETALLURGY (2020)

Add to Collection

Article Engineering, Chemical

CFD simulation of gas flow field distribution and design optimization of the tridimensional rotational flow sieve tray with different structural parameters

Meng Tang et al.

CHEMICAL ENGINEERING SCIENCE (2019)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Evaluation of various turbulence models for numerical simulation of a multiphase system in a rotating packed bed

Yi Ouyang et al.

COMPUTERS & FLUIDS (2019)

Add to Collection

Article Engineering, Chemical

On the effect of turbulence models on CFD simulations of a counter-current spray drying process

Hasan Jubaer et al.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2019)

Add to Collection

Article Green & Sustainable Science & Technology

A novel method of preparing PbS from waste lead paste through in-situ vulcanization and reduction

Lu Zhan et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Add to Collection

Article Engineering, Environmental

An Emission-Free Vacuum Chlorinating Process for Simultaneous Sulfur Fixation and Lead Recovery from Spent Lead-Acid Batteries

Kang Liu et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Buckling of a spherical shell under external pressure and inward concentrated load: Asymptotic solution

Alexander Evkin et al.

MATHEMATICS AND MECHANICS OF SOLIDS (2017)

Add to Collection

Article Engineering, Chemical

CFD-PBM simulation of dense emulsion flows in a high-shear rotor-stator mixer

Vipin Michael et al.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2017)

Add to Collection

Article Engineering, Chemical

Characteristics of liquid flow in a rotating packed bed for CO2 capture: A CFD analysis

Peng Xie et al.

CHEMICAL ENGINEERING SCIENCE (2017)

Add to Collection

Article Energy & Fuels

Accelerated desulphurization of waste lead battery paste in a high-gravity rotating packed bed

Peng Ning et al.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2016)

Add to Collection

Article Engineering, Chemical

Effect of rheology of dense emulsions on the flow structure in agitated systems

Jerzy Baldyga et al.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2016)

Add to Collection

Article Metallurgy & Metallurgical Engineering

A new pre-desulphurization process of damped lead battery paste with sodium carbonate based on a surface update concept

Junfeng Zhang et al.

HYDROMETALLURGY (2016)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Effect of pH on desulphurization of spent lead paste via hydrometallurgical process

Wei Zhang et al.

HYDROMETALLURGY (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Effect of lead and caesium on the mechanical, vibrational and thermodynamic properties of hexagonal fluorocarbonates: a comparative first principles study

E. Narsimha Rao et al.

RSC ADVANCES (2016)

Add to Collection

Article Engineering, Chemical

Shrinking core like fluid solid reactions-A dispersion model accounting for fluid phase volume change and solid phase particle size distributions

Tilman Knorr et al.

CHEMICAL ENGINEERING SCIENCE (2012)

Add to Collection

Article Engineering, Chemical

Influence of dry and wet grinding conditions on fineness and shape of particle size distribution of product in a ball mill

Naoya Kotake et al.

ADVANCED POWDER TECHNOLOGY (2011)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Mathematical Modeling of Initial Filling Moment of Uphill Teeming Process Considering a Trumpet

Zhe Tan et al.

ISIJ INTERNATIONAL (2011)

Add to Collection

Article Chemistry, Physical

The refining of secondary lead for use in advanced lead-acid batteries

Timothy W. Ellis et al.

JOURNAL OF POWER SOURCES (2010)

Add to Collection

Article Engineering, Chemical

A shrinking particle-shrinking core model for leaching of a zinc ore containing silica

Vida Safari et al.

INTERNATIONAL JOURNAL OF MINERAL PROCESSING (2009)

Add to Collection

© Peeref 2019-2024. All rights reserved.