4.8 Article

Self-Assembled 1D/3D Perovskite Heterostructure for Stable All-Air-Processed Perovskite Solar Cells with Improved Open-Circuit Voltage

Related references

Note: Only part of the references are listed.
Article Engineering, Environmental

Multiple roles of negative thermal expansion material for high-performance fully-air processed perovskite solar cells

Wenyuan Zhang et al.

Summary: In this study, a novel negative thermal expansion (NTE) material is introduced into perovskite film for the first time, leading to the growth of high-quality perovskite films with improved stability. This results in a champion power conversion efficiency of 22.40% and excellent thermal and light stability.

CHEMICAL ENGINEERING JOURNAL (2023)

Article Chemistry, Multidisciplinary

Multi-Level Passivation of MAPbI3 Perovskite for Efficient and Stable Photovoltaics

Ning Wei et al.

Summary: The introduction of a new functional ionic liquid has improved the photovoltaic performance and long-term stability of perovskite solar cells.

ADVANCED FUNCTIONAL MATERIALS (2022)

Review Chemistry, Multidisciplinary

Surface Passivation Using 2D Perovskites toward Efficient and Stable Perovskite Solar Cells

Guangbao Wu et al.

Summary: 3D perovskite solar cells face challenges in surface defects and material interplay. 2D perovskites provide better stability as a protective barrier. Surface passivation using 2D perovskites enables higher efficiency and stability.

ADVANCED MATERIALS (2022)

Article Chemistry, Physical

Improved Performance and Stability of Perovskite Solar Modules by Regulating Interfacial Ion Diffusion with Nonionic Cross-Linked 1D Lead-Iodide

Haipeng Zeng et al.

Summary: The introduction of a novel compound DPPO significantly improved the electronic quality and stability of perovskite films, leading to high-efficiency and stable solar modules.

ADVANCED ENERGY MATERIALS (2022)

Article Chemistry, Physical

Ionic-Liquid-Perovskite Capping Layer for Stable 24.33%-Efficient Solar Cell

Xuejie Zhu et al.

Summary: A new approach using an ionic liquid was designed to improve the stability and performance of metal-halide perovskite solar cells. Experimental results showed that this method effectively enhances the photovoltaic performance while exhibiting outstanding stability characteristics.

ADVANCED ENERGY MATERIALS (2022)

Article Energy & Fuels

Mixed Dimensional Perovskites Heterostructure for Highly Efficient and Stable Perovskite Solar Cells

Chuangye Ge et al.

Summary: The synthesis of 1D Me3SPbI3 nanoarrays in aqueous condition and their incorporation into lead halide 3D perovskites resulted in an efficient and stable heterostructural 1D/3D perovskite photoactive layer. This design achieved a PCE of 22.06% for PSCs and maintained 97% of their initial efficiency after 1000 hours of storage under ambient conditions, demonstrating promising potential for next-generation highly efficient and stable perovskite solar cells.

SOLAR RRL (2022)

Article Multidisciplinary Sciences

Inactive (PbI2)2RbCl stabilizes perovskite films for efficient solar cells

Yang Zhao et al.

Summary: In halide perovskite solar cells, introducing RbCl doping effectively stabilizes the perovskite phase by converting excess PbI2 into an inactive compound. This strategy achieved a certified PCE of 25.6% for FAPbI(3) perovskite solar cells, with high device stability and minimal hysteresis effects.

SCIENCE (2022)

Article Chemistry, Multidisciplinary

Active Functional Groups and Adjacent Dual-Interaction Strategies Enable Perovskite Solar Cells to Prosper: Including Unique Morphology and Enhanced Optoelectronic Performance

Xin Li et al.

Summary: This study utilizes phthalic acid (PHA) to passivate defects and regulate the morphology of perovskite films, which greatly enhances the performance of perovskite solar cells.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2022)

Article Engineering, Environmental

Ionic liquid-mediated reconstruction of perovskite surface for highly efficient photovoltaics

Ji Hyeon Lee et al.

Summary: In this study, an ionic liquid surface modifier was used to passivate the perovskite layer in order to achieve efficient harvesting of light energy in perovskite photovoltaics. The results showed that the ionic liquid effectively reduced surface traps and improved the efficiency of perovskite photovoltaics by approximately 15%. However, using an excess amount of the ionic liquid resulted in the formation of perovskite-ionic liquid complexes and inefficient charge transport and extraction.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Electrochemistry

Gourmet powder functionalization of SnO2 for high-performance perovskite solar cells made in air

Wenyuan Zhang et al.

Summary: This study demonstrates the use of monosodium glutamate (MSG) as a multifunctional modifier to enhance the performance of perovskite solar cells, showing potential for improving film quality and charge transfer in PSCs. The unique characteristics of MSG led to a champion PCE of 17.71% and remarkable long-term stability in air-processed PSCs.

ELECTROCHIMICA ACTA (2021)

Article Multidisciplinary Sciences

Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes

Hanul Min et al.

Summary: By introducing an interlayer between the electron-transporting and perovskite layers in perovskite solar cells, researchers have successfully enhanced charge extraction and transport from the perovskite, leading to higher power conversion efficiency and fewer interfacial defects. The coherent interlayer allowed the fabrication of devices with a certified efficiency of 25.5%, which maintained about 90% of its initial efficiency even after continuous light exposure for 500 hours. The findings provide guidelines for designing defect-minimizing interfaces in metal halide perovskites and electron-transporting layers.

NATURE (2021)

Review Chemistry, Physical

Ionic Liquids-Enabled Efficient and Stable Perovskite Photovoltaics: Progress and Challenges

Tingting Niu et al.

Summary: Perovskite solar cells (PSCs) benefit greatly from the use of ionic liquids (ILs), which play versatile roles in improving efficiency and stability. ILs help control film formation dynamics, chemically passivate surfaces, enhance stability, and provide innovative alternatives to traditional materials in PSCs. Advanced progress in ILs-based perovskite photovoltaics highlights the importance of ILs in achieving high-performing PSCs.

ACS ENERGY LETTERS (2021)

Article Energy & Fuels

Carboxyl functional group-assisted defects passivation strategy for efficient air-processed perovskite solar cells with excellent ambient stability

Yaxin Deng et al.

Summary: The use of terephthalic acid (PTA) as a defect passivation strategy for fabricating highly efficient and stable perovskite solar cells in ambient air has been shown to significantly enhance device performance and long-term stability. The Lewis acid-base adduct formed between PTA and uncoordinated Pb2+ defects plays a key role in promoting the efficiency of the solar cells. This simple yet effective approach provides a promising path for commercial production of high-performance perovskite solar cells.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2021)

Review Chemistry, Applied

Ion migration in halide perovskite solar cells: Mechanism, characterization, impact and suppression

Huachao Zai et al.

Summary: Metal halide perovskites are considered the most promising candidate for the next-generation Photovoltaics due to their superior optoelectronic properties and low cost. However, the poor stability of Perovskite solar cells is largely attributed to ion migration, which remains a crucial challenge for improving their stability.

JOURNAL OF ENERGY CHEMISTRY (2021)

Article Chemistry, Physical

π-π conjugate structure enabling the channel construction of carrier-facilitated transport in 1D-3D multidimensional CsPbI2Br solar cells with high stability

Yi Long et al.

Summary: This study introduces a novel one-dimensional perovskite structure with aminoquinoline, demonstrating enhanced efficiency and stability in photovoltaic devices.

NANO ENERGY (2021)

Article Nanoscience & Nanotechnology

Recent progress in stabilizing perovskite solar cells through two-dimensional modification

Chongyang Zhi et al.

Summary: Researchers have explored a strategy of modifying the structure of lead halide perovskite solar cells with hydrophobic organic cations to improve both efficiency and stability. This approach involves multidimensional tuning of the bulk and interfaces of perovskite materials, defect passivation, and interface functionalization. Ultimately, stability improvement through 2D modifications has been proven effective.

APL MATERIALS (2021)

Review Chemistry, Physical

Additive Engineering for Efficient and Stable Perovskite Solar Cells

Fei Zhang et al.

ADVANCED ENERGY MATERIALS (2020)

Review Chemistry, Physical

Chemical Approaches for Stabilizing Perovskite Solar Cells

Jin-Wook Lee et al.

ADVANCED ENERGY MATERIALS (2020)

Review Nanoscience & Nanotechnology

Minimizing non-radiative recombination losses in perovskite solar cells

Deying Luo et al.

NATURE REVIEWS MATERIALS (2020)

Article Nanoscience & Nanotechnology

Interface Engineering of Imidazolium Ionic Liquids toward Efficient and Stable CsPbBr3 Perovskite Solar Cells

Wenyu Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Chemistry, Multidisciplinary

Detrimental Effect of Unreacted PbI2 on the Long-Term Stability of Perovskite Solar Cells

Ganbaatar Tumen-Ulzii et al.

ADVANCED MATERIALS (2020)

Review Chemistry, Multidisciplinary

High-Efficiency Perovskite Solar Cells

Jin Young Kim et al.

CHEMICAL REVIEWS (2020)

Article Chemistry, Physical

Critical Assessment of the Use of Excess Lead Iodide in Lead Halide Perovskite Solar Cells

Bart Roose et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2020)

Review Chemistry, Multidisciplinary

Towards commercialization: the operational stability of perovskite solar cells

Nengxu Li et al.

CHEMICAL SOCIETY REVIEWS (2020)

Review Chemistry, Multidisciplinary

Defect passivation strategies in perovskites for an enhanced photovoltaic performance

Lin Fu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Article Optics

Surface passivation of perovskite film for efficient solar cells

Qi Jiang et al.

NATURE PHOTONICS (2019)

Review Chemistry, Multidisciplinary

Stability improvement under high efficiencynext stage development of perovskite solar cells

Danni Yu et al.

SCIENCE CHINA-CHEMISTRY (2019)

Article Multidisciplinary Sciences

Atomic-level passivation mechanism of ammonium salts enabling highly efficient perovskite solar cells

Essa A. Alharbi et al.

NATURE COMMUNICATIONS (2019)

Article Chemistry, Multidisciplinary

Ionic Additive Engineering Toward High-Efficiency Perovskite Solar Cells with Reduced Grain Boundaries and Trap Density

Feilong Cai et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Article Chemistry, Multidisciplinary

In Situ Growth of 2D Perovskite Capping Layer for Stable and Efficient Perovskite Solar Cells

Peng Chen et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Review Chemistry, Physical

Progress toward Stable Lead Halide Perovskite Solar Cells

Luis K. Ono et al.

JOULE (2018)

Article Multidisciplinary Sciences

Fast oxygen diffusion and iodide defects mediate oxygen-induced degradation of perovskite solar cells

Nicholas Aristidou et al.

NATURE COMMUNICATIONS (2017)

Article Physics, Applied

Defect states in perovskite solar cells associated with hysteresis and performance

D. Westley Miller et al.

APPLIED PHYSICS LETTERS (2016)

Article Chemistry, Multidisciplinary

Surface optimization to eliminate hysteresis for record efficiency planar perovskite solar cells

Dong Yang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Article Chemistry, Multidisciplinary

Unreacted PbI2 as a Double-Edged Sword for Enhancing the Performance of Perovskite Solar Cells

T. Jesper Jacobsson et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Article Multidisciplinary Sciences

Evidence for ion migration in hybrid perovskite solar cells with minimal hysteresis

Philip Calado et al.

NATURE COMMUNICATIONS (2016)

Article Chemistry, Multidisciplinary

Hybrid Organic-Inorganic Perovskites (HOIPs): Opportunities and Challenges

Joseph Berry et al.

ADVANCED MATERIALS (2015)

Article Multidisciplinary Sciences

Ionic transport in hybrid lead iodide perovskite solar cells

Christopher Eames et al.

NATURE COMMUNICATIONS (2015)