Related references
Note: Only part of the references are listed.Simulation of a Wurster fluidized bed by CFD-DEM with a cohesive contact model
Heng Li et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2022)
Study of fluid cell coarsening for CFD-DEM simulations of polydisperse gas–solid flows
He Lei et al.
Particuology (2022)
Investigating biomass composition and size effects on fast pyrolysis using global sensitivity analysis and CFD simulations
Liqiang Lu et al.
CHEMICAL ENGINEERING JOURNAL (2021)
CFD-DEM modeling of filtered fluid-particle drag and heat transfer in bidisperse gas-solid flows
He Lei et al.
CHEMICAL ENGINEERING SCIENCE (2021)
Conventional and data-driven modeling of filtered drag, heat transfer, and reaction rate in gas-particle flows
Li-Tao Zhu et al.
AICHE JOURNAL (2021)
Toward general regime maps for cohesive-particle flows: Force versus energy-based descriptions and relevant dimensionless groups
W. Casey Q. LaMarche et al.
AICHE JOURNAL (2021)
Particle-scale study of heat and mass transfer in a bubbling fluidised bed
Shuai Wang et al.
CHEMICAL ENGINEERING SCIENCE (2021)
Important mesoscale phenomena in gas phase fluidized bed ethylene polymerization
Jingyuan Sun et al.
PARTICUOLOGY (2020)
CFD-DEM coupled with thermochemical sub-models for biomass gasification: Validation and sensitivity analysis
Shuai Wang et al.
CHEMICAL ENGINEERING SCIENCE (2020)
Heat transfer in a pulsed fluidized bed by using coupled CFD-DEM method
Kai Zhang et al.
POWDER TECHNOLOGY (2020)
Review and implementation of CFD-DEM applied to chemical process systems
Shahab Golshan et al.
CHEMICAL ENGINEERING SCIENCE (2020)
An EMMS drag model for coarse grid simulation of polydisperse gas-solid flow in circulating fluidized bed risers
Zhiyuan Qin et al.
CHEMICAL ENGINEERING SCIENCE (2019)
Group C+ particles: Enhanced flow and fluidization of fine powders with nano-modulation
Yandaizi Zhou et al.
CHEMICAL ENGINEERING SCIENCE (2019)
Modeling and simulation of particle size distribution behavior in gas-liquid-solid polyethylene fluidized bed reactors
Hui Pan et al.
POWDER TECHNOLOGY (2018)
Important Analysis of Liquid Vaporization Modeling Scheme in Computational Fluid Dynamics Modeling of Gas Liquid Solid Polyethylene Fluidized Bed Reactors
Hui Pan et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2017)
Micro/meso simulation of a fluidized bed in a homogeneous bubbling regime
Amir Esteghamatian et al.
INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2017)
Towards filtered drag force model for non-cohesive and cohesive particle-gas flows
Ali Ozel et al.
PHYSICS OF FLUIDS (2017)
CFD-DEM study on cohesive particles in a spouted bed
Huibin Xu et al.
POWDER TECHNOLOGY (2017)
CFD-DEM simulation of flow pattern and particle velocity in a fluidized bed with wet particles
Chengxiao Song et al.
POWDER TECHNOLOGY (2017)
An Adhesive CFD-DEM Model for Simulating Nanoparticle Agglomerate Fluidization
Daoyin Liu et al.
AICHE JOURNAL (2016)
Effects of liquid action mechanisms on hydrodynamics in liquid-containing gas-solid fluidized bed reactor
Yefeng Zhou et al.
CHEMICAL ENGINEERING JOURNAL (2016)
Bubble Behaviors of Large Cohesive Particles in a 2D Fluidized Bed
Jiliang Ma et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2016)
A modified cohesion model for CFD-DEM simulations of fluidization
Yile Gu et al.
POWDER TECHNOLOGY (2016)
Investigating agglomeration phenomena in an air-polyethylene fluidized bed using DEM-CFD approach
Zahra Mansourpour et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2014)
A drag model for filtered Euler-Lagrange simulations of clustered gas-particle suspensions
Stefan Radl et al.
CHEMICAL ENGINEERING SCIENCE (2014)
Large-scale CFD-DEM simulations of fluidized granular systems
Dalibor Jajcevic et al.
CHEMICAL ENGINEERING SCIENCE (2013)
Numerical investigation of effect of electrostatic forces on the hydrodynamics of gas-solid fluidized beds
M. A. Hassani et al.
POWDER TECHNOLOGY (2013)
A CFD-PBM-PMLM integrated model for the gas-solid flow fields in fluidized bed polymerization reactors
Wei-Cheng Yan et al.
AICHE JOURNAL (2012)
Open-source MFIX-DEM software for gas-solids flows: Part I-Verification studies
Rahul Garg et al.
POWDER TECHNOLOGY (2012)
Open-source MFIX-DEM software for gas-solids flows: Part II - Validation studies
Tingwen Li et al.
POWDER TECHNOLOGY (2012)
Adhesive particulate flow: The discrete-element method and its application in energy and environmental engineering
Shuiqing Li et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2011)
Discrete particle simulation of particle-fluid flow: model formulations and their applicability
Z. Y. Zhou et al.
JOURNAL OF FLUID MECHANICS (2010)
Why the two-fluid model fails to predict the bed expansion characteristics of Geldart A particles in gas-fluidized beds: A tentative answer
Junwu Wang et al.
CHEMICAL ENGINEERING SCIENCE (2009)
Discrete particle simulation of particulate systems: Theoretical developments
H. P. Zhu et al.
CHEMICAL ENGINEERING SCIENCE (2007)
Review of discrete particle modeling of fluidized beds
N. G. Deen et al.
CHEMICAL ENGINEERING SCIENCE (2007)
Advanced polyethylene technologies - Controlled material properties
H Knuuttila et al.
LONG-TERM PROPERTIES OF POLYOLEFINS (2004)
Granular flow down an inclined plane: Bagnold scaling and rheology
LE Silbert et al.
PHYSICAL REVIEW E (2001)
Early warning of agglomeration in fluidized beds by attractor comparison
JR van Ommen et al.
AICHE JOURNAL (2000)