High rate response of ultra-high-performance fiber-reinforced concretes under direct tension

The tensile response of ultra-high-performance fiber-reinforced concretes (UHPFRCs) at high strain rates (5-24 s(-1)) was investigated. Three types of steel fibers, including twisted, long and short smooth steel fibers, were added by 1.5% volume content in an ultra high performance concrete (UHPC) with a compressive strength of 180 MPa. Two different cross sections, 25 x 25 and 25 x 50 mm(2), of tensile specimens were used to investigate the effect of the cross section area on the measured tensile response of UHPFRCs. Although all the three fibers generated strain hardening behavior even at high strain rates, long smooth fibers produced the highest tensile resistance at high rates whereas twisted fiber did at static rate. The breakages of twisted fibers were observed from the specimens tested at high strain rates unlike smooth steel fibers. The tensile behavior of UHPFRCs at high strain rates was clearly influenced by the specimen size, especially in post-cracking strength. (C) 2014 Elsevier Ltd. All rights reserved.