☆ 4.7 Article

Photo-Initiated in situ synthesis of polypyrrole Fe-Coated porous silicon microspheres for High-performance Lithium-ion battery anodes

CHEMICAL ENGINEERING JOURNAL (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Electrochemical activation of oxygen atom of SnO2 to expedite efficient conversion reaction for alkaline-ion (Li+/Na+/K+) storages

Yong Cheng et al.

Summary: Anode materials based on SnO2 have attracted attention due to their high capacity and relatively mild voltage platforms. However, their practical application is challenging due to low initial Coulombic efficiency and poor stability. Recent research has shown that compositing carbon or metal particles with SnO2 can achieve high alkaline-ion storages. In this work, a unique Co-NC shell derived from ZIF-67 is introduced to accelerate the conversion reaction between SnO2 and Sn phases, improving the efficiency and stability of the electrode material.

NANO RESEARCH (2023)

Add to Collection

Article Chemistry, Physical

Stabilization of high-voltage layered oxide cathode by utilizing residual lithium to form NASICON-type nanoscale functional coating

Yabin Shen et al.

Summary: This study utilizes residual lithium to form nanoscale functional coatings in situ, addressing the performance issues of high-voltage medium-nickel low-cobalt lithium-ion batteries, including capacity fading, electrode-electrolyte interfacial side reactions, and bulk structure degradation. By optimizing the stability of the interface between electrolyte and electrode, improving the thermal stability and ion conductivity of the battery, better cycling stability and rate capacity were achieved.

NANO RESEARCH (2023)

Add to Collection

Article Engineering, Environmental

Robust MXene adding enables the stable interface of silicon anodes for high-performance Li-ion batteries

Jie Tang et al.

Summary: In this study, MXene nanosheets are used as conductive additives to improve the capacity and cycle performance of silicon anodes, while inhibiting the generation of dead silicon.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection

Article Engineering, Environmental

Vapor-solid-solid growth of silicon nanowires using magnesium seeds and their electrochemical performance in Li-ion battery anodes

Muhammad Rashad et al.

Summary: This study demonstrates the growth of silicon nanowires (Si NWs) using magnesium (Mg) as a catalyst material. The Si NWs grown with Mg show high mass loadings and tight diameter control. They exhibit high initial coulombic efficiencies and high gravimetric and areal capacities as anodes for lithium-ion batteries.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection

Article Chemistry, Multidisciplinary

High-Performance Microsized Si Anodes for Lithium-Ion Batteries: Insights into the Polymer Configuration Conversion Mechanism

Qiyu Wang et al.

Summary: A composite microsized Si anode is synthesized by constructing a unique polymer at a Si/C surface, which overcomes the challenges of poor electrical conductivity, serious volume expansion, and unstable solid electrolyte interface. The anode exhibits stable electrochemical performances and high capacity.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Photo/electrochemical synthesis of Si@Sn microsphere composites with excellent electrochemical lithium storage

Jiaqian Yin et al.

Summary: A high-performance porous Si@Sn composite material was successfully synthesized using a photo electrochemical deposition strategy, showing excellent lithium storage performance under optimized conditions.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Integrating SEI into Layered Conductive Polymer Coatings for Ultrastable Silicon Anodes

Siyuan Pan et al.

Summary: A layered conductive polyaniline coating is applied to silicon nanoparticles to achieve high areal capacity and long lifespan. The coating stores electrolyte and forms a hybrid SEI skin with uniform distribution, enhancing flexibility and maintaining homogeneous ion transport. The silicon anode shows remarkable cycling stability and good rate performance.

ADVANCED MATERIALS (2022)

Add to Collection

Review Materials Science, Multidisciplinary

Self-healing polymer binders for the Si and Si/carbon anodes of lithium-ion batteries

Shuai Wu et al.

Summary: This paper provides an overview of the synthesis, characterization, and self-healing mechanisms of self-healing polymer binders for Si and Si/C anodes, as well as their recent application in flexible lithium batteries. The self-healing binder plays a crucial role in improving the cycling stability of Si-based anodes by repairing internal/external damages caused by volume changes. It has promising prospects in the development of advanced rechargeable lithium-ion batteries.

NEW CARBON MATERIALS (2022)

Add to Collection

Article Electrochemistry

Light-assisted synthesis of copper/cuprous oxide reinforced nanoporous silicon microspheres with boosted anode performance for lithium-ion batteries

Junjie Gong et al.

Summary: A novel Cu/Cu2O reinforced nanoporous silicon microspheres were successfully constructed using a simple photodeposition-galvanic replacement method, which demonstrated improved electrochemical performance for silicon as an anode material in lithium-ion batteries. The ratio of Si and Cu in the final products can be effectively adjusted by modulating the concentration of Cu2+ in the reaction solutions for optimal performance.

ELECTROCHIMICA ACTA (2021)

Add to Collection

Article Energy & Fuels

Subnano-sized silicon anode via crystal growth inhibition mechanism and its application in a prototype battery pack

Jaekyung Sung et al.

Summary: Silicon-based anodes are a promising alternative to commonly used graphite anodes in commercial batteries. Researchers have developed a synthesis route for silicon anodes consisting of subnanometre-sized particles, enhancing cycling stability and Coulombic efficiency. The practical application of the fabricated energy storage system demonstrates high cycle life and calendar life retention percentages.

NATURE ENERGY (2021)

Add to Collection

Article Chemistry, Physical

Metallic Tin Nanoparticle-Reinforced Tin-Doped Porous Silicon Microspheres with Superior Electrochemical Lithium Storage Properties

Zeyu Xu et al.

Summary: The study presents a promising strategy to design high-performance anode composites by fabricating tin-doped porous silicon microspheres embedded with tin nanoparticles, which exhibit excellent discharge performance and cycling stability.

ACS APPLIED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Silicon in Hollow Carbon Nanospheres Assembled Microspheres Cross-linked with N-doped Carbon Fibers toward a Binder Free, High Performance, and Flexible Anode for Lithium-Ion Batteries

Ruiyu Zhu et al.

Summary: This study investigates the challenges faced by silicon as an anode material in lithium-ion batteries and successfully prepares a binder-free and free-standing anode electrode paper, achieving excellent battery performance and demonstrating great potential for practical applications.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Preparation and electrochemical properties of novel silicon-carbon composite anode materials with a core-shell structure

Heng-chao Jin et al.

Summary: The multi-component porous Si-SiOx (pSi) and carbon nanofibers hybrids (pSi-CNFs) were successfully prepared by pretreatment of SiO and catalytic chemical vapor deposition. The core-shell structure formed by uniformly coating CNFs on the surface of pSi improved the conductivity of the composites and enhanced the cycling stability and capacity retention of the pSi-CNFs.

NEW CARBON MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Scalable and controllable fabrication of CNTs improved yolk-shelled Si anodes with advanced in operando mechanical quantification

Lei Zhang et al.

Summary: Yolk-shelled silicon/carbon materials show great promise as anode candidates for lithium-ion batteries, despite issues such as limited conductive promotion and low tap density. This study successfully synthesized a range of high-performance YS-Si/C anode materials and utilized an electrochemical transmission electron microscope system to gain insights into structural changes during battery operation, providing valuable guidance for the design of high-performance electrode materials.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Recent progress in the carbon-based frameworks for high specific capacity anodes/cathode in lithium/sodium ion batteries

Xu Li et al.

Summary: Recent research has focused on developing electrode materials for secondary-ion batteries to achieve high energy and power densities. Carbon materials have been identified as suitable host frameworks for loading high specific capacity anode/cathode materials, with factors such as specific surface area and pore volume affecting their electrochemical performance. By increasing binding sites for polysulfides and inhibiting dendrite growth, as well as designing the pore structure to shorten Li+/Na+ diffusion paths, the cycling life and rate performance of batteries can be improved. DFT calculations and simulations are utilized to design carbon frameworks and predict their electrochemical performance.

NEW CARBON MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

A Two-Dimensional Mesoporous Polypyrrole-Graphene Oxide Heterostructure as a Dual-Functional Ion Redistributor for Dendrite-Free Lithium Metal Anodes

Haodong Shi et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Review Engineering, Environmental

Toward understanding the interaction within Silicon-based anodes for stable lithium storage

Rana Zafar Abbas Manj et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Chemistry, Physical

Novel hierarchically branched CoC2O4@CoO/Co composite arrays with superior lithium storage performance

Zhishun He et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Article Multidisciplinary Sciences

Scalable synthesis of ant-nest-like bulk porous silicon for high-performance lithium-ion battery anodes

Weili An et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Chemistry, Physical

Low-Temperature Reduction Strategy Synthesized Si/Ti3C2 MXene Composite Anodes for High-Performance Li-Ion Batteries

Xiaobin Hui et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Largely Improved Battery Performance Using a Microsized Silicon Skeleton Caged by Polypyrrole as Anode

Yingying Lv et al.

ACS NANO (2019)

Add to Collection

Article Chemistry, Physical

Multi-core yolk-shell like mesoporous double carbon-coated silicon nanoparticles as anode materials for lithium-ion batteries

Niantao Liu et al.

ENERGY STORAGE MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Hierarchical Porous Nanosheets Constructed by Graphene-Coated, Interconnected TiO2 Nanoparticles for Ultrafast Sodium Storage

Baosong Li et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Formation of Polypyrrole-Coated Sb2Se3 Microclips with Enhanced Sodium-Storage Properties

Yongjin Fang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Add to Collection

Article Chemistry, Physical

Bifunctional Conducting Polymer Coated CoP Core-Shell Nanowires on Carbon Paper as a Free-Standing Anode for Sodium Ion Batteries

Jing Zhang et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Sandwich-Like FeCl3@C as High-Performance Anode Materials for Potassium-Ion Batteries

Deping Li et al.

ADVANCED MATERIALS INTERFACES (2018)

Add to Collection

Article Chemistry, Physical

Bio-inspired engineering of Bi2S3-PPy yolk-shell composite for highly durable lithium and sodium storage

Haichen Liang et al.

NANO ENERGY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Surface Binding of Polypyrrole on Porous Silicon Hollow Nanospheres for Li-Ion Battery Anodes with High Structure Stability

Fei-Hu Du et al.

ADVANCED MATERIALS (2014)

Add to Collection

Article Nanoscience & Nanotechnology

A pomegranate-inspired nanoscale design for large-volume-change lithium battery anodes

Nian Liu et al.

NATURE NANOTECHNOLOGY (2014)

Add to Collection

Article Chemistry, Physical

TiO2-SiO2 composite fibers with tunable interconnected porous hierarchy fabricated by single-spinneret electrospinning toward enhanced photocatalytic activity

Yun Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Nanoengineered Polypyrrole-Coated Fe2O3@C Multifunctional Composites with an Improved Cycle Stability as Lithium-Ion Anodes

Fei Han et al.

ADVANCED FUNCTIONAL MATERIALS (2013)

Add to Collection

Article Chemistry, Multidisciplinary

The Li-Ion Rechargeable Battery: A Perspective

John B. Goodenough et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)

Add to Collection

Article Chemistry, Physical

High-rate electrochemical energy storage through Li+ intercalation pseudocapacitance

Veronica Augustyn et al.

NATURE MATERIALS (2013)

Add to Collection

Article Multidisciplinary Sciences

Stable Li-ion battery anodes by in-situ polymerization of conducting hydrogel to conformally coat silicon nanoparticles

Hui Wu et al.

NATURE COMMUNICATIONS (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Polypyrrole-iron-oxygen coordination complex as high performance lithium storage material

Ya Mao et al.

ENERGY & ENVIRONMENTAL SCIENCE (2011)

Add to Collection

Article Chemistry, Multidisciplinary

Lithium-ion batteries. A look into the future

Bruno Scrosati et al.

ENERGY & ENVIRONMENTAL SCIENCE (2011)

Add to Collection

Article Chemistry, Physical

Ordered mesoporous α-MoO3 with iso-oriented nanocrystalline walls for thin-film pseudocapacitors

Torsten Brezesinski et al.

NATURE MATERIALS (2010)

Add to Collection

Review Physics, Condensed Matter

QUANTUM ESPRESSO: a modular and open-source software project for quantum simulations of materials

Paolo Giannozzi et al.

JOURNAL OF PHYSICS-CONDENSED MATTER (2009)

Add to Collection

Article Chemistry, Multidisciplinary

Templated Nanocrystal-Based Porous TiO2 Films for Next-Generation Electrochemical Capacitors

Torsten Brezesinski et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

Add to Collection

Article Multidisciplinary Sciences

Building better batteries

M. Armand et al.

NATURE (2008)

Add to Collection

Article Chemistry, Multidisciplinary

Semiempirical GGA-type density functional constructed with a long-range dispersion correction

Stefan Grimme

JOURNAL OF COMPUTATIONAL CHEMISTRY (2006)

Add to Collection

Review Multidisciplinary Sciences

Issues and challenges facing rechargeable lithium batteries

JM Tarascon et al.

NATURE (2001)

Add to Collection

Article Engineering, Biomedical

Titanium containing amorphous hydrogenated carbon films (a-C : H/Ti): surface analysis and evaluation of cellular reactions using bone marrow cell cultures in vitro

A Schroeder et al.

BIOMATERIALS (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.