4.7 Article

Single-layer organic photovoltaics fabricated via solution-based electrical doping of ternary bulk heterojunction films

Related references

Note: Only part of the references are listed.
Article Engineering, Environmental

Fine-tuned crystallinity of polymerized non-fullerene acceptor via molecular engineering towards efficient all-polymer solar cell

Yuxiang Li et al.

Summary: By optimizing the central core and pi-spacer of polymerized non-fullerene acceptors, the solid-state crystallinity can be regulated to improve the performance of all-polymer solar cells, especially the short-circuit current density and open circuit voltage. Chlorinated PY-2T2Cl can form an ideal blend morphology when paired with polymer donor, leading to a higher power conversion efficiency in the resulting solar cells.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Energy & Fuels

Highly Semitransparent Indoor Nonfullerene Organic Solar Cells Based on Benzodithiophene-Bridged Porphyrin Dimers

Venkatesh Piradi et al.

Summary: Two acceptor-donor-acceptor-based porphyrin dimers, C8TEBDT-2P and C8TBDT-2P, are presented as donors for high-performance semitransparent indoor organic photovoltaics. C8TEBDT-2P exhibits a more red-shifted absorption profile and higher power conversion efficiency, enriching the pool of porphyrin donors for such applications.

ENERGY TECHNOLOGY (2022)

Article Engineering, Environmental

Block copolymer compatibilizer for efficient and stable nonfullerene organic solar cells

Bin Li et al.

Summary: In this study, a block copolymer was designed and synthesized as a compatibilizer to enhance the performance and stability of nonfullerene organic solar cells. The addition of the block copolymer optimized carrier dynamic process, enhanced donor-acceptor miscibility, and stabilized the blend morphology. This strategy showed similar function in different systems.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Polymer Science

Producing p-Doped Surface for Hole Transporting Layer-Free Nonfullerene Organic Solar Cells

Yang Liu et al.

Summary: In this work, organic molybdenum peroxide (OMP) is used as a p-dopant to dope the active layers of nonfullerene organic solar cells, achieving a simplified device structure without a hole transporting layer. The OMP can effectively dope polymer donors, improving the efficiency and thermal stability of the cells.

MACROMOLECULAR RAPID COMMUNICATIONS (2022)

Review Chemistry, Physical

Ternary organic solar cells: A review of the role of the third element

Nutifafa Y. Doumon et al.

Summary: Incorporating a third element in the active layer of organic photovoltaic devices is a promising strategy to improve efficiency and stability. The research on ternary organic solar cells (TOSCs) has experienced significant growth, especially after the breakthrough efficiency in 2017. This review discusses the role of the third component in improving efficiency and stability, and compares the performance of TOSCs to colloidal quantum dot solar cells (CQDSCs).

NANO ENERGY (2022)

Article Chemistry, Multidisciplinary

Efficient Electrical Doping of Organic Semiconductors Via an Orthogonal Liquid-Liquid Contact

Lulu Sun et al.

Summary: A novel method called orthogonal liquid-liquid-contact (OLLC) doping has been developed for the preparation of electrically doped films, which enables efficient doping at the interface of water and an organic solvent during film formation. This technique offers the advantages of ease of operation and high efficiency, making it suitable for devices such as organic photovoltaics and light-emitting diodes.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Multidisciplinary

Efficient Electron Transport Layer Free Small-Molecule Organic Solar Cells with Superior Device Stability

Haijun Bin et al.

Summary: In this study, a new small-molecule electron donor (H31) was designed and synthesized, which, when blended with the electron acceptor Y6, resulted in solar cells with power conversion efficiencies exceeding 13% with or without the ETL PDINO. The ETL-free cells showed superior shelf life compared to devices with an ETL, suggesting that small-molecule donor-acceptor blends offer interesting prospects for achieving efficient, reproducible, and stable device architectures.

ADVANCED MATERIALS (2021)

Article Nanoscience & Nanotechnology

Increasing Volume in Conjugated Polymers to Facilitate Electrical Doping with Phosphomolybdic Acid

Felipe A. Larrain et al.

Summary: Increasing the volume of the polymer film facilitates the infiltration of the PMA Keggin structure, resulting in an increased electrical p-type doping level. By controlling the volume of the polymer film, the effectiveness of solution-based electrical p-type doping can be optimized.

ACS APPLIED MATERIALS & INTERFACES (2021)

Review Chemistry, Physical

Recent progress of organic photovoltaics for indoor energy harvesting

Lin Xie et al.

Summary: The recent progress of indoor organic photovoltaics shows high power conversion efficiency and suitability for indoor energy harvesting. Due to the drawbacks of outdoor solar cells, indoor organic photovoltaic technology emerges as a reliable option for wireless power supply.

NANO ENERGY (2021)

Editorial Material Chemistry, Physical

Accurate photovoltaic measurement of organic cells for indoor applications

Yong Cui et al.

JOULE (2021)

Article Chemistry, Multidisciplinary

Efficient Hole Transfer via Delocalized Excited State in Small Molecular Acceptor: A Comparative Study on Photodynamics of PM6:Y6 and PM6:ITIC Organic Photovoltaic Blends

Shuyan Liang et al.

Summary: Organic solar cells (OSCs) based on small molecular acceptors (SMAs) have achieved significant progress, with a power conversion efficiency (PCE) over 16% due to novel material design and advances in device preparation technology. This study compared the performance of two bulk-heterojunction photovoltaic devices containing different SMAs, finding that the PM6:Y6 blend had a higher efficiency than the PM6:ITIC blend, demonstrating the importance of proper molecular design strategy and beneficial film morphology in facilitating charge generation in OSCs using SMAs.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Multidisciplinary

High-performance all-small-molecule organic solar cells without interlayers

Rui Sun et al.

Summary: In this study, a two-step solvent treatment strategy was introduced to construct high-performance all-small-molecule solar cells without interfacial layers, showing improved efficiency and good generality across different systems. This strategy has the potential to enhance device stability, extend the lifespan of ITO substrates, and reduce production costs of modules.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Chemistry, Multidisciplinary

Surface doping of non-fullerene photoactive layer by soluble polyoxometalate for printable organic solar cells

Lin Hu et al.

Summary: By immersing the non-fullerene photoactive layer film into a PMA solution, effective surface p-type doping was induced, leading to improved hole collection and a high power conversion efficiency of 11.37% in non-fullerene OSCs without commonly evaporated MoO3. This surface doping technique shows promise as an effective strategy for printable electronics technology.

CHEMICAL COMMUNICATIONS (2021)

Article Chemistry, Physical

Highly-Transparent and True-Colored Semitransparent Indoor Photovoltaic Cells

Hang Yin et al.

SMALL METHODS (2020)

Article Materials Science, Multidisciplinary

Sequential molecular doping of non-fullerene organic solar cells without hole transport layers

Dongyang Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

Review Materials Science, Multidisciplinary

Charge carrier traps in organic semiconductors: a review on the underlying physics and impact on electronic devices

Hamna F. Haneef et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

Review Nanoscience & Nanotechnology

The role of the third component in ternary organic solar cells

Nicola Gasparini et al.

NATURE REVIEWS MATERIALS (2019)

Article Chemistry, Physical

Morphology of Organic Semiconductors Electrically Doped from Solution Using Phosphomolybdic Acid

Tzu-Yen Huang et al.

CHEMISTRY OF MATERIALS (2019)

Article Chemistry, Physical

Ternary Organic Blend Approaches for High Photovoltaic Performance in Versatile Applications

Minwoo Nam et al.

ADVANCED ENERGY MATERIALS (2019)

Article Nanoscience & Nanotechnology

Panchromatic Ternary Organic Solar Cells with Porphyrin Dimers and Absorption-Complementary Benzodithiophene-based Small Molecules

Venkatesh Piradi et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Materials Science, Multidisciplinary

Cathode interlayer-free organic solar cells with enhanced device performance upon alcohol treatment

Xuebin Chen et al.

JOURNAL OF MATERIALS CHEMISTRY C (2019)

Article Chemistry, Physical

Ternary blend organic solar cells with improved morphological stability

Minwoo Nam et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Review Chemistry, Physical

Flexible and Semitransparent Organic Solar Cells

Yaowen Li et al.

ADVANCED ENERGY MATERIALS (2018)

Article Chemistry, Multidisciplinary

Stable solvent for solution-based electrical doping of semiconducting polymer films and its application to organic solar cells

Felipe A. Larrain et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Article Nanoscience & Nanotechnology

Nongeminate Recombination in Organic Solar Cells

Clemens Goehler et al.

ADVANCED ELECTRONIC MATERIALS (2018)

Article Chemistry, Physical

Solution-based electrical doping of semiconducting polymer films over a limited depth

Vladimir A. Kolesov et al.

NATURE MATERIALS (2017)

Review Chemistry, Multidisciplinary

Versatile ternary organic solar cells: a critical review

Qiaoshi An et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Article Materials Science, Multidisciplinary

Air-processed high performance ternary blend solar cell based on PTB7-Th: PCDTBT:PC70BM

Xiaoxiang Sun et al.

ORGANIC ELECTRONICS (2016)

Article Physics, Applied

Effect of leakage current and shunt resistance on the light intensity dependence of organic solar cells

Christopher M. Proctor et al.

APPLIED PHYSICS LETTERS (2015)

Article Chemistry, Multidisciplinary

Theoretical Study of the Molecular Ordering, Paracrystallinity, And Charge Mobilities of Oligomers in Different Crystalline Phases

Ilhan Yavuz et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

Review Optics

Status and prospects for ternary organic photovoltaics

Luyao Lu et al.

NATURE PHOTONICS (2015)

Article Chemistry, Multidisciplinary

Simplified Tandem Polymer Solar Cells with an Ideal Self-Organized Recombination Layer

Hongkyu Kang et al.

ADVANCED MATERIALS (2015)

Article Chemistry, Multidisciplinary

Large scale deployment of polymer solar cells on land, on sea and in the air

Nieves Espinosa et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Article Multidisciplinary Sciences

A Universal Method to Produce Low-Work Function Electrodes for Organic Electronics

Yinhua Zhou et al.

SCIENCE (2012)

Article Materials Science, Multidisciplinary

Recombination in polymer-fullerene bulk heterojunction solar cells

Sarah R. Cowan et al.

PHYSICAL REVIEW B (2010)

Article Chemistry, Multidisciplinary

Charge transport and photocurrent generation in poly (3-hexylthiophene): Methanofullerene bulk-heterojunction solar cells

VD Mihailetchi et al.

ADVANCED FUNCTIONAL MATERIALS (2006)

Article Physics, Multidisciplinary

Photocurrent generation in polymer-fullerene bulk heterojunctions

VD Mihailetchi et al.

PHYSICAL REVIEW LETTERS (2004)

Article Materials Science, Multidisciplinary

Effect of interchain interactions on the absorption and emission of poly(3-hexylthiophene) -: art. no. 064203

PJ Brown et al.

PHYSICAL REVIEW B (2003)

Article Materials Science, Multidisciplinary

Optical spectroscopy of field-induced charge in self-organized high mobility poly(3-hexylthiophene)

PJ Brown et al.

PHYSICAL REVIEW B (2001)