☆ 4.7 Article

Metal-organic framework nanocrystals enabled efficient and durable two-step perovskite photovoltaics

CHEMICAL ENGINEERING JOURNAL (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Environmental

Constructing of superhydrophobic and intact crystal terminal: Interface sealing strategy for stable perovskite solar cells with efficiency over 23%

Shendong Xu et al.

Summary: The use of pseudo-halide ammonium salts to seal nonstoichiometric imperfections on the perovskite crystal terminal, and the interaction with uncoordinated Pb2+, has proven effective in reducing lead leakage and promoting efficient hole extraction.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection

Article Energy & Fuels

The Role of Ionic Liquids in Performance Enhancement of Two-Step Perovskite Photovoltaics

Xiao Liang et al.

Summary: This study investigates the effect of introducing MAAc into perovskite films and finds that MAAc can accelerate the solidification process and reduce deep defect states. Additionally, acetate ions can fill halide vacancies, lowering trap state density and improving the performance and durability of perovskite photovoltaic devices.

SOLAR RRL (2023)

Add to Collection

Article Engineering, Environmental

Perovskite nanowires as defect passivators and charge transport networks for efficient and stable perovskite solar cells

Jeongbeom Cha et al.

Summary: The presence of ionic defects on the surface and at the grain boundaries of perovskite films is a challenge for enhancing the power conversion efficiency of perovskite solar cells. In this study, inorganic perovskite nanomaterials in the form of nanowires were introduced to passivate defects and improve charge transport, resulting in significantly reduced non-radiative recombination and improved device stability. The NW-modified perovskite film achieved a high power conversion efficiency of 21.56% over a 3500-hour period.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection

Article Engineering, Environmental

Synergistic dual-interface modification strategy for highly reproducible and efficient PTAA-based inverted perovskite solar cells

Junqian Dai et al.

Summary: This study introduces PEO and TPAB to improve the hydrophobicity of PTAA and reduce nonradiative recombination losses, leading to improved performance and stability of inverted perovskite solar cells based on PTAA.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection

Article Engineering, Environmental

Carbon nanofibers fabricated via electrospinning to guide crystalline orientation for stable perovskite solar cells with efficiency over 24%

Zhiyang Xu et al.

Summary: This study introduces nitrogen-doped carbon nanofibers to guide the preferential orientation growth of perovskite crystals, reducing the defect density in perovskite solar cells and improving their power conversion efficiency and stability.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection

Article Engineering, Environmental

Passivation of positively charged cationic defects in perovskite with nitrogen-donor crown ether enabling efficient perovskite solar cells

Yuxuan Yang et al.

Summary: A nitrogen-donor crown ether is developed as a positive defect passivator in metal-halide perovskite solar cells, reducing the electron trap density and improving the build-in potential. The addition of a small amount of nitrogen-donor crown ether significantly enhances the efficiency and stability of the solar cells.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Homologous Bromides Treatment for Improving the Open-Circuit Voltage of Perovskite Solar Cells

Yong Li et al.

Summary: Depositing homologous bromide salts on the perovskite surface can achieve surface and bulk passivation, resulting in solar cells with high open-circuit voltage. This method provides a simple and universal way to reduce the voltage deficit of single-junction perovskite solar cells and has potential applications in other high-performance optoelectronic devices.

ADVANCED MATERIALS (2022)

Add to Collection

Article Electrochemistry

Facile tuning of PbI2 porosity via additive engineering for humid air processable perovskite solar cells

Mohamad Firdaus Mohamad Noh et al.

Summary: By introducing 4-tert-butylpyridine (TBP) as an additive, this study improves the film quality of perovskite solar cells (PSC). Increasing the amount of TBP transforms the compact PbI2 layer into a porous structure, enabling the penetration of methylammonium iodide solution and producing high-quality perovskite layer. Increasing the TBP content enhances the efficiency and ambient stability of the PSC.

ELECTROCHIMICA ACTA (2022)

Add to Collection

Article Multidisciplinary Sciences

Centimetre-scale perovskite solar cells with fill factors of more than 86 per cent

Jun Peng et al.

Summary: Perovskite solar cells are at the forefront of emerging photovoltaic technologies due to their rapid development in efficiency and stability. This study introduces a reverse-doping process to fabricate nitrogen-doped titanium oxide electron transport layers, which significantly improves the charge transport performance and fill factor of the cells.

NATURE (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Origin of Efficiency and Stability Enhancement in High-Performing Mixed Dimensional 2D-3D Perovskite Solar Cells: A Review

Md Arafat Mahmud et al.

Summary: The mixed-dimensional 2D-3D perovskite solar cells, incorporating long carbon-chain organic spacer cations, have shown promising results in terms of enhancing both device efficiency and stability. By carefully balancing the composition of 2D and 3D perovskite, researchers aim to take advantage of the specific properties of each material phase for further improvement.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Size-tunable MoS2 nanosheets for controlling the crystal morphology and residual stress in sequentially deposited perovskite solar cells with over 22.5% efficiency

Zhanfei Zhang et al.

Summary: The two-step crystallization method for perovskite film fabrication has been improved by incorporating MoS2 nanosheets as nano-scaffolds. The MoS2 treatment enhances the penetration of organic iodide, improves crystal orientation, and reduces residual stress and trap density in the film. The resulting PSCs exhibit high conversion efficiency and stability.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Add to Collection

Article Multidisciplinary Sciences

Damp heat-stable perovskite solar cells with tailored-dimensionality 2D/3D heterojunctions

Randi Azmi et al.

Summary: By tailoring the dimensional fragments of two-dimensional perovskite layers, damp-heat stable perovskite solar cells with high power conversion efficiencies were successfully fabricated. These cells retain over 95% of their initial value after more than 1000 hours under damp-heat test conditions, meeting one of the critical industrial stability standards for photovoltaic modules.

SCIENCE (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Advance and prospect of metal-organic frameworks for perovskite photovoltaic devices

Xiao Liang et al.

Summary: The combination of MOFs and perovskite photovoltaic devices has opened up a new pathway to address stability issues and significantly enhance photovoltaic performance. MOFs can serve as an interlayer, a modifier of the interlayer, and a MOFs/perovskite heterojunction, improving device stability and efficiency.

ORGANIC ELECTRONICS (2022)

Add to Collection

Article Engineering, Environmental

High-performance large-area blade-coated perovskite solar cells with low ohmic loss for low lighting indoor applications

Zhuoneng Bi et al.

Summary: Emerging hybrid organic-inorganic perovskites with superior optoelectronic properties have promising prospects for photovoltaic applications, especially in low-lighting indoor scenarios such as IoT networks or low-energy wireless communication devices. A one-step blade-coating method assisted by hexafluorobenzene (HFB) was developed to deposit dense, large-area smooth and high quality perovskite films with low ohmic loss. The fabricated devices demonstrated high power conversion efficiency under standard and low-lighting indoor illumination conditions. This scalable approach paves the way for designing high-performance perovskite solar cells for a variety of emerging indoor PV applications.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Applied

In-depth understanding of ionic liquid assisted perovskite film formation mechanism for two-step perovskite photovoltaics

Fei Wang et al.

Summary: This study investigated the mechanism of ionic-liquid-assisted perovskite film formation using a two-step method. The research found that the introduced ionic liquid methylammonium formate (MAFa) can lower the perovskite formation enthalpy and accelerate the crystallization process. The ionic liquid can also fill up halide vacancies in perovskite crystals, resulting in reduced trap states. With the help of MAFa IL, uniform perovskite films with larger grains and lower defect density were prepared, and the corresponding device efficiency exceeded 23% with significantly improved stability.

JOURNAL OF ENERGY CHEMISTRY (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Light-induced beneficial ion accumulation for high-performance quasi-2D perovskite solar cells

Xiaomei Lian et al.

Summary: By illuminating, favorable ion accumulation can be constructed to significantly improve the performance of quasi-2D perovskite solar cells.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

Add to Collection

Article Chemistry, Physical

Yttrium-doped Sn3O4 two-dimensional electron transport material for perovskite solar cells with efficiency over 23%

Sheng Li et al.

Summary: The electron density of Sn3O4 is improved by doping it with yttrium (Y), resulting in an enhancement of its conductivity and an upshift of the Fermi level. This improves the electron extraction capability and built-in potential of Sn3O4, leading to an increased power conversion efficiency of perovskite solar cells (PSCs).

ECOMAT (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Perovskite Quantum Wells Formation Mechanism for Stable Efficient Perovskite Photovoltaics-A Real-Time Phase-Transition Study

Hanlin Hu et al.

Summary: The study investigates the use of a combination of bulk 3D and reduced dimensional perovskite layers to enhance the performance of perovskite solar cells, achieving efficiencies exceeding 22% and significantly improving device stability by controlling the ionic reaction during organic cation coating process to optimize the PQWs/3D architecture.

ADVANCED MATERIALS (2021)

Add to Collection

Article Engineering, Environmental

Tuning the reactivity of PbI2 film via monolayer Ti3C2Tx MXene for two-step-processed CH3NH3PbI3 solar cells

Yu Zhao et al.

Summary: In this study, 2D monolayer Ti3C2Tx MXene nanosheets were introduced into the PbI2 layer to enhance reactivity and convert it to perovskite efficiently. The Ti3C2Tx additive also improved the energy-level alignment of the perovskite and passivated defects effectively, leading to a champion power conversion efficiency of 19.27%.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Physical

Low-Cost Dopant Additive-Free Hole-Transporting Material for a Robust Perovskite Solar Cell with Efficiency Exceeding 21%

Hongwei Zhu et al.

Summary: Developing a novel pyramid-shaped, low-cost HTM MeOTTVT with extended conjugation has improved charge transport efficiency and stability, resulting in high-performance PSCs. The molecular configuration of MeOTTVT facilitates hole transport and exhibits outstanding stability, making it a promising material for commercialization.

ACS ENERGY LETTERS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Stabilizing Fullerene for Burn-in-Free and Stable Perovskite Solar Cells under Ultraviolet Preconditioning and Light Soaking

Pengjie Hang et al.

Summary: Introducing Bphen in perovskite solar cells stabilizes the C-60-cage through formation of stable charge-transfer complexes, achieving efficient devices. The resulting devices demonstrate good stability under simulated conditions.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Formation of High-Performance Multi-Cation Halide Perovskites Photovoltaics by δ-CsPbI3/δ-RbPbI3 Seed-Assisted Heterogeneous Nucleation

Essa A. Alharbi et al.

Summary: Engineering multi-cation halide composition in perovskite solar cells through a two-step sequential deposition method can increase efficiency and stability, inducing the formation of porous hexagonal films by adding specific crystal morphologies. Integration of orthorhombic CsPbI3 during the conversion step further enhances device crystallinity and performance.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Universal Bottom Contact Modification with Diverse 2D Spacers for High-Performance Inverted Perovskite Solar Cells

Jun Li et al.

Summary: This study investigates the effect of different 2D spacers on the bottom interface of inverted p-i-n PVSCs, revealing a significant improvement in efficiency and stability after optimization, attributed to the formation of 2D/3D heterojunction and related mechanisms. Additionally, the unencapsulated devices demonstrate excellent stability with 90% retention of initial efficiency after storage under ambient conditions.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Synergistic Effects of Eu-MOF on Perovskite Solar Cells with Improved Stability

Jie Dou et al.

Summary: The introduction of an ultrathin Eu-MOF layer in perovskite solar cells has been shown to enhance device stability and light utilization by reducing defect concentration, improving carrier transport, and utilizing the Forster resonance energy transfer effect. This leads to a champion power conversion efficiency of 22.16% and excellent device stability, with 96% of original PCE retained after 2000 hours under 30% relative humidity and 91% retained after 1200 hours at 85 degrees C in N-2 environment.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Molten-Salt-Assisted CsPbI3 Perovskite Crystallization for Nearly 20%-Efficiency Solar Cells

Jingru Zhang et al.

Summary: The molten-salt-assisted crystallization (MSAC) strategy improves grain growth of all-inorganic perovskite films by changing the crystallization pathways with the introduction of molten salt. This results in high-quality films with desired optical and electrical properties. Compared to traditional solvent annealing, MSAC enables more intensive mass transfer and higher efficiency in producing films with champion steady-state output efficiency and high open-circuit voltage.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Multifunctional Enhancement for Highly Stable and Efficient Perovskite Solar Cells

Yuan Cai et al.

Summary: Using the multifunctional molecule DFPDA as an additive, the stability issues of perovskite solar cells have been effectively addressed, resulting in high-quality films with an efficiency of 22.21% and significantly improved stability against moisture, heat, and light.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Room-Temperature Partial Conversion of α-FAPbI3 Perovskite Phase via PbI2 Solvation Enables High-Performance Solar Cells

Dounya Barrit et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Detrimental Effect of Unreacted PbI2 on the Long-Term Stability of Perovskite Solar Cells

Ganbaatar Tumen-Ulzii et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Physics, Applied

Electroluminescence transients and correlation with steady-state solar output in solution-prepared CH3NH3PbI3 perovskite solar cells using different contact materials

M. Cordoba et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Simultaneous Power Conversion Efficiency and Stability Enhancement of Cs2AgBiBr6 Lead-Free Inorganic Perovskite Solar Cell through Adopting a Multifunctional Dye Interlayer

Xiaoqing Yang et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Ligand-Modulated Excess PbI2 Nanosheets for Highly Efficient and Stable Perovskite Solar Cells

Huanhuan Wang et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Graded 2D/3D Perovskite Heterostructure for Efficient and Operationally Stable MA-Free Perovskite Solar Cells

Qin Yao et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Realizing a Cosolvent System for Stable Tin-Based Perovskite Solar Cells Using a Two-Step Deposition Approach

Saeed Shahbazi et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

High-Pressure Nitrogen-Extraction and Effective Passivation to Attain Highest Large-Area Perovskite Solar Module Efficiency

Minyong Du et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Teaching an Old Anchoring Group New Tricks: Enabling Low-Cost, Eco-Friendly Hole-Transporting Materials for Efficient and Stable Perovskite Solar Cells

Yang Wang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

Add to Collection

Article Environmental Sciences

Impact of scale, activation solvents, and aged conditions on gas adsorption properties of UiO-66

Farhad Ahmadijokani et al.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Multifunctional Chemical Linker Imidazoleacetic Acid Hydrochloride for 21% Efficient and Stable Planar Perovskite Solar Cells

Jiangzhao Chen et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

In-situ Interfacial Passivation for Stable Perovskite Solar Cells

Longfan Duan et al.

FRONTIERS IN MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Enhancing Efficiency and Stability of Photovoltaic Cells by Using Perovskite/Zr-MOF Heterojunction Including Bilayer and Hybrid Structures

Chia-Chen Lee et al.

ADVANCED SCIENCE (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Porous and Intercrossed PbI2-CsI Nanorod Scaffold for Inverted Planar FA-Cs Mixed-Cation Perovskite Solar Cells

Xiuwen Xu et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Sequential Deposition of High-Quality Photovoltaic Perovskite Layers via Scalable Printing Methods

Fei Guo et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

The preparation and characterization of UiO-66 metal-organic frameworks for the delivery of the drug ciprofloxacin and an evaluation of their antibacterial activities

Mohaddeseh Nasrabadi et al.

NEW JOURNAL OF CHEMISTRY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Aluminum-Doped Cesium Lead Bromide Perovskite Nanocrystals with Stable Blue Photoluminescence Used for Display Backlight

Ming Liu et al.

ADVANCED SCIENCE (2017)

Add to Collection

Review Chemistry, Physical

A Review on Disorder-Driven Metal-Insulator Transition in Crystalline Vacancy-Rich GeSbTe Phase-Change Materials

Jiang-Jing Wang et al.

MATERIALS (2017)

Add to Collection

Article Chemistry, Physical

Enhanced performance in hole transport material free perovskite solar cells via morphology control of PbI2 film by solvent treatment

Nian Cheng et al.

JOURNAL OF POWER SOURCES (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Planar Heterojunction Perovskite Solar Cells Incorporating Metal-Organic Framework Nanocrystals

Ting-Hsiang Chang et al.

ADVANCED MATERIALS (2015)

Add to Collection

© Peeref 2019-2024. All rights reserved.