☆ 4.7 Article

Improvement in deformation degree of Zr surface-layered Bi-2223 ceramics by diffusion annealing temperature

CERAMICS INTERNATIONAL (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Ceramics

Role of active slip systems induced with holmium impurity in Bi-2212 ceramics on mechanical design performance and morphological properties

A. T. Ulgen et al.

Summary: The effect of Ho/Bi partial replacement in Bi-2212 superconductors on their structural, morphological, and mechanical properties was investigated using SEM and Vickers hardness measurements. The results showed that the proper Ho concentration enhanced the characteristics of the superconductors due to improved crystallinity quality and slip systems. However, an excessive amount of Ho ions induced crack-initiating defects. The study also analyzed the indentation size effect and compared different mechanical modeling approaches.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Article Materials Science, Ceramics

The structural, magnetic, and pinning features of Bi-2223 superconductors: Effects of SiC nanoparticles addition

H. Fallah-Arani et al.

Summary: This research comprehensively studies the influence of Silicon Carbide nanoparticles (SiC-NPs) on the microstructure, superconducting, and pinning properties of Bi-2223 superconductors. The results show that the addition of SiC-NPs improves the microstructure and connectivity of grains, as well as the superconductivity parameters, opening up new avenues for high-current energy storage and electrical industrial applications.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Article Chemistry, Physical

Bi-2223 superconductor ceramics added with cubic-shaped TiO2 nanoparticles: Structural, microstructural, magnetic, and vortex pinning studies

Hesam Fallah-Arani et al.

Summary: In this study, TiO2 cubic shaped nanoparticles were used to prepare TiO2/(Bi,Pb)2Sr2Ca2Cu3O10+θ (Bi-2223) composites, with the addition of 0.2 wt% TiO2-CNPs improving the superconducting properties of the Bi-2223 superconductor. This work suggests interesting applications for Bismuth Strontium Calcium Copper Oxide (BSCCO) superconductors in various fields.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Physics, Applied

Improving Superconductivity, Microstructure, and Mechanical Properties by Substituting Different Ionic Pb Elements to Bi and Ca Elements in Bi-2223 Superconductors

N. K. Saritekin et al.

Summary: This detailed study investigated the changes in microstructural, mechanical, and superconducting characteristics of bulk Bi1.8Pb0.2Sr2.0Ca1.8Pb0.2Cu3Oy materials prepared at different milling time intervals. The results showed significant improvements in the technology, industry, and engineering applications up to 3 hours of milling time, beyond which the characteristics deteriorate.

JOURNAL OF SUPERCONDUCTIVITY AND NOVEL MAGNETISM (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Study the effects of MgO nanoparticle addition on superconducting characteristics of Bi1.6 Ag0.4Sr1.9Ba0.1Ca2Cu3O10+? system

A. S. Baqi et al.

Summary: This study investigates the effects of adding nano-sized magnesium oxide (MgO) powders to the Bi2223 superconducting system. The results show that the lattice parameters and volume fraction of the Bi2223 phase are changed with the addition of nano MgO. The sample with the highest addition of 0.3wt% MgO exhibits the highest volume fraction of the Bi2223 phase and the highest superconducting transition temperature, Tc.

JOURNAL OF OVONIC RESEARCH (2022)

Add to Collection

Article Materials Science, Ceramics

Effects of TiO2 nanoparticle addition on the flux pinning properties of the Bi1.6Pb0.4Sr2Ca2Cu3O10+δ ceramics

An T. Pham et al.

Summary: The effects of adding TiO2 nanoparticles on the flux pinning properties of the BPSCCO system were investigated. The addition of TiO2 decreased the volume fraction of Bi-2223 and degraded the texture structure of the samples. However, it enhanced the critical temperature and critical current density for certain doping levels.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Refinement of some basic features of Zr surface-layered Bi-2223 superconductor with diffusion annealing temperature

E. Orhan et al.

Summary: This study investigates the effects of diffusion annealing temperatures on the structural, morphological, electrical, and superconducting properties of Zr surface-layered Bi-2223 ceramics. The results show that the diffusion of Zr improves the crystallinity and intergranular couplings of the ceramics, leading to enhanced electrical conductivity and superconducting features. The optimal annealing temperature of 800°C is found to stabilize the superconductivity and improve the basic characteristics of the Bi-2223 superconducting systems.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Evolution of electrical, superconducting, crystallinity and structural features with aliovalent Nd/Sr replacement in Bi-2223 ceramics

M. Dogruer et al.

Summary: This paper provides a comprehensive characterization of Bi-2223 ceramic material with aliovalent Nd/Sr replacement, revealing that the replacement mechanism seriously damages the fundamental electrical, superconducting, crystallinity and structural features. The study shows that the substitution level affects the superconducting and electrical properties, characteristic transition temperatures, average crystallite size, and structural quality.

MATERIALS CHEMISTRY AND PHYSICS (2022)

Add to Collection

Article Thermodynamics

Role of trivalent Bi/Tm partial substitution on active operable slip systems in Bi-2212 crystal structure

U. Erdem et al.

Summary: This study found that mechanical properties and hardness of Bi-2212 ceramic materials improve significantly with Bi/Tm substitution, but excess Tm concentrations may lead to difficulty in controlling crack propagation, reducing the material's sustainability.

CRYOGENICS (2021)

Add to Collection

Article Thermodynamics

Structural and superconducting properties of low-density Bi(Pb)-2223 superconductor: Effect of Eu2O3 nanoparticles addition

E. S. Nurbaisyatul et al.

Summary: This paper presented the structural analysis of Europium nanoparticles addition in low-density Bi (Pb)-2223 superconductor. The results showed that as the Eu concentration increases, the amount of Bi-2223 phase slightly decreased. The highest superconducting properties were observed at x = 0.2 wt%.

CRYOGENICS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Influence of Sr/Nd partial replacement on fundamental properties of Bi-2223 superconducting system

M. Dogruer et al.

Summary: This comprehensive study investigates the change in flux pinning mechanism, physical, mechanical, and structural characteristics of pure and Sr-site Nd-substituted Bi1.8Pb0.35Sr1.9-yNdyCa2.2Cu3Ox (Bi-2223) systems. The results show that Nd impurity negatively affects the pinning capability of thermal flux motions, copper pairs coupling probabilities, potential energy barriers, crystal structure, and mechanical properties. The Hays-Kendall model is identified as the best method to obtain load-independent Vickers hardness values for the Sr-site Nd-substituted Bi1.8Pb0.35Sr1.9-yNdyCa2.2Cu3Ox (Bi-2223) systems. Additionally, dynamic microhardness measurements reveal a strong dependence of mechanical properties on load and Nd impurity levels.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2021)

Add to Collection

Article Materials Science, Ceramics

The impact of the addition of Bi2Te3 nanoparticles on the structural and the magnetic properties of the Bi-2223 high-Tc superconductor

M. S. Shalaby et al.

Summary: The research investigated the impact of Bi2Te3 nanoparticles on the properties of BSCCO high-Tc superconductors, finding that nano-Bi2Te3 can enhance flux pinning capability and critical current density, as well as influence flux densities and flux pinning mechanisms.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Physics, Applied

Structural and Electrical Properties of Nanosized Sm2O3 Doped Bi1.6Pb0.4Sr2Ca2Cu3Oy Superconductors

Ozlem Bilgili

Summary: In this study, Bi(1.6)Pb(0.4)Sr(2)Ca(2)Cu(3)Oy superconductor samples doped with nanosized samarium oxide were synthesized and characterized. XRD, SEM, and EDX analysis revealed that the volume fraction of Bi-2223 phase was highest at x = 0.05 addition, with decreased grain size. Superconducting transition temperatures increased with Sm content x = 0.05, but decreased with further addition amount.

JOURNAL OF LOW TEMPERATURE PHYSICS (2021)

Add to Collection

Article Physics, Applied

Trapping of Magnetic Flux in Bi-2223 Ceramic Superconductors Doped with α-Al2O3 Nanoparticles

M. Hernandez-Wolpez et al.

JOURNAL OF SUPERCONDUCTIVITY AND NOVEL MAGNETISM (2020)

Add to Collection

Article Engineering, Electrical & Electronic

Composite Mechanical Properties of Coils Made With Nickel-Alloy Laminated Bi-2223 Conductors

William S. Marshall et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2020)

Add to Collection

Article Engineering, Electrical & Electronic

A novel research on the subject of the load-independent microhardness performances of Sr/Ti partial displacement in Bi-2212 ceramics

Y. Zalaoglu et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2020)

Add to Collection

Article Materials Science, Ceramics

Effect of homovalent Bi/Ga substitution on propagations of flaws, dislocations and crack in Bi-2212 superconducting ceramics: Evaluation of new operable slip systems with substitution

M. B. Turkoz et al.

CERAMICS INTERNATIONAL (2019)

Add to Collection

Article Engineering, Electrical & Electronic

Increased homogenous clusters in superconducting paths with diffusion of optimum Ni impurities into Bi-2223 crystal

T. Turgay et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2018)

Add to Collection

Article Engineering, Electrical & Electronic

Decrement in metastability with Zr nanoparticles inserted in Bi-2223 superconducting system and working principle of hybridization mechanism

N. K. Saritekin et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2016)

Add to Collection

Article Engineering, Electrical & Electronic

Changes in mechanical and structural properties of Bi-2212 added MgB2 superconductors

E. Taylan Koparan et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2016)

Add to Collection

Article Physics, Applied

Deformation of Mechanical Properties and Failure Behavior of Hays-Kendall Approach in Bi-2223 Superconducting Core After Eu Inclusions

Musa Dogruer et al.

JOURNAL OF SUPERCONDUCTIVITY AND NOVEL MAGNETISM (2014)

Add to Collection

Article Engineering, Electrical & Electronic

Effect of metallic Ag on the properties of Bi-2212 ceramic superconductors

Berdan Ozkurt et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2013)

Add to Collection

Article Engineering, Electrical & Electronic

Breaking point of the harmony between Gd diffused Bi-2223 slabs with diffusion annealing temperature

H. Aydin et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2013)

Add to Collection

Article Physics, Applied

Enhanced flux pinning in IR PLD grown Y-doped Bi-2212 films

Glaiza Rose S. Blanca et al.

PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS (2013)

Add to Collection

Article Engineering, Electrical & Electronic

Vickers hardness measurements and some physical properties of Pr2O3 doped Bi-2212 superconductors

E. Asikuzun et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2012)

Add to Collection

Article Physics, Applied

The Effect of PbSe Addition on the Mechanical Properties of Bi-2212 Superconductors

S. Cavdar et al.

JOURNAL OF SUPERCONDUCTIVITY AND NOVEL MAGNETISM (2012)

Add to Collection

Article Engineering, Electrical & Electronic

Investigation of mechanical and superconducting properties of iron diffusion-doped Bi-2223 superconductors

O. Ozturk et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2011)

Add to Collection

Article Materials Science, Ceramics

Study of microindentation cracks in bismuth-doped arsenic selenide glasses

K. Sangwal et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2011)

Add to Collection

Article Physics, Applied

Thermal Analysis Studies of (Bi, Pb)-2223/Linear Low Density Polyethylene Composite Materials

S. G. Elsharkawy et al.

JOURNAL OF SUPERCONDUCTIVITY AND NOVEL MAGNETISM (2011)

Add to Collection

Article Physics, Applied

Influence of Diffusion-Annealing Temperature on the Physico-Mechanical Properties of Au-doped Bi-2223 Superconductors

O. Ozturk et al.

JOURNAL OF SUPERCONDUCTIVITY AND NOVEL MAGNETISM (2011)

Add to Collection

Article Chemistry, Physical

Transport, microstructure and mechanical properties of Au diffusion-doped Bi-2223 superconductors

M. Nursoy et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2008)

Add to Collection

Article Physics, Applied

Effects of Li Substitution in Bi-2223 Superconductors

O. Bilgili et al.

JOURNAL OF SUPERCONDUCTIVITY AND NOVEL MAGNETISM (2008)

Add to Collection

Article Physics, Applied

Role of diffusion-annealing time on the mechanical properties of bulk Bi-2223 superconductors diffusion-doped with Au

M. Yilmazlar et al.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2007)

Add to Collection

Article Physics, Applied

Thermal expansion and Vickers hardness measurements on Bi1.6Pb0.4Sr2Ca2-xSmxCu3Oy superconductors

M. Yilmazlar et al.

PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS (2006)

Add to Collection

Article Physics, Multidisciplinary

Superconducting properties of BiPbSrCsCuO and BiSrCaCuO glass-ceramics

W Miller et al.

ACTA PHYSICA POLONICA A (2006)

Add to Collection

© Peeref 2019-2024. All rights reserved.