4.7 Article

A numerical study on chloride transport in alkali-activated fly ash/slag concretes

Related references

Note: Only part of the references are listed.
Article Construction & Building Technology

A new analytical method to predict permeability properties of cementitious mortars: The impacts of pore structure evolutions and relative humidity variations

Qing Xiang Xiong et al.

Summary: This research develops analytical models for describing the water sorption isotherm and permeability properties of cementitious mortars. The models incorporate a probabilistic method for pore size distribution and transformation models for pore radius. The influence of ions on water sorption and the evolution of pore structure are also investigated. The results demonstrate the significance of pore size distribution and relative humidity in determining the permeability of mortars.

CEMENT & CONCRETE COMPOSITES (2023)

Article Construction & Building Technology

Numerical study of interactive ingress of calcium leaching, chloride transport and multi-ions coupling in concrete

Qing-feng Liu et al.

Summary: This study investigates the behavior of multi-ions, including calcium and chloride, in concrete under wastewater and seawater conditions. Multiple mechanisms, such as calcium leaching, chloride transport, and multi-ion coupling, were analyzed. The interactive ingress of multi ions was realized through simulation methods, considering the individual mechanisms and mutual influences. The study also examined the distributions of diverse ions and the evolution mechanisms of porosity, considering the interaction with calcium ions in both pore solution and solid phase. The results suggest that calcium leaching accelerates chloride transport due to coarsened pore structure, and the electrochemical coupling effect of multi ions facilitates calcium leaching in the early stage but slightly delays it in the later stage.

CEMENT AND CONCRETE RESEARCH (2023)

Article Construction & Building Technology

Multi-scale modelling and statistical analysis of heterogeneous characteristics effect on chloride transport properties in concrete

Liang-yu Tong et al.

Summary: The chloride transport properties of concrete were comprehensively analyzed in this study by considering the multi-scale microstructural characteristics. A multi-scale predictive model was proposed to predict the diffusivity of bulk cement paste, mortar, and concrete. The diffusivities of each scale were validated against experimental results by considering the hydration process, the presence of sand/interfacial transition zones, and the aggregate shape. By adopting a statistical analysis method, it was found that capillary pores and C-S-H components dominate the diffusivity estimation of bulk cement paste, while the consideration of ITZ and multi-species ions interaction can enhance the prediction accuracy for diffusivities of mortars and chloride penetration depths in concrete. The proposed multi-scale framework provides a new perspective to study chloride penetration in concrete and enhances the understanding of deterioration mechanisms for reinforced concrete structures in complex or marine environments.

CONSTRUCTION AND BUILDING MATERIALS (2023)

Article Construction & Building Technology

A mix design methodology of slag and fly ash-based alkali-activated paste

Beibei Sun et al.

Summary: This paper systematically explored the effects of control factors on the early age properties of slag and fly ash-based alkali-activated paste, identifying key factors affecting workability and strength, and proposing a methodology for predicting compressive strength and designing mix proportions.

CEMENT & CONCRETE COMPOSITES (2022)

Article Computer Science, Interdisciplinary Applications

Mechanical-transport-chemical modeling of electrochemical repair methods for corrosion-induced cracking in marine concrete

Zhaozheng Meng et al.

Summary: This paper presents an innovative methodology for modeling the mechanical, transport, and chemical process during electrochemical treatment for marine concrete structures. The interconnected influencing factors in practical engineering can be quantitatively investigated by combining three sub-models. The calculation results show that the influence of current density on crack closure rates is more significant and highlight other previously unreported factors on electrochemical repair.

COMPUTER-AIDED CIVIL AND INFRASTRUCTURE ENGINEERING (2022)

Article Green & Sustainable Science & Technology

Developing a sustainable concrete incorporating bentonite clay and silica fume: Mechanical and durability performance

Muhammad Ashraf et al.

Summary: This study investigates the use of bentonite clay (BC) and silica fume (SF) as partial replacements of cement in concrete. The results show that adding SF improves compressive strength, and BC and SF enhance pore structures and resistance against sulfate attack and chloride ingress. The proposed empirical formulations using machine learning techniques accurately predict the properties of concrete. Furthermore, BC and SF can reduce carbon emissions, making the proposed concrete mixtures environmentally viable for the construction sector.

JOURNAL OF CLEANER PRODUCTION (2022)

Article Construction & Building Technology

Numerical study on cracking and its effect on chloride transport in concrete subjected to external load

Qing-feng Liu et al.

Summary: This study presents a multi-species and multi-phase model considering the time-dependent cracking in concrete. The crack propagation and chloride diffusion are coupled by statistical learning approach, and the effect of the electrostatic potential on multi-species transport is considered. The validity of the model is verified against third-party experiments, and the impacts of different crack characteristics and environmental factors on chloride transport are discussed.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Article Construction & Building Technology

Influence of coarse aggregate settlement induced by vibration on long-term chloride transport in concrete: a numerical study

Yuxin Cai et al.

Summary: A numerical study on the influence of vibration-induced settlement on long-term chloride transport in concrete was conducted. The study found that the increase of vibration time led to changes in the distribution of chloride concentration in different parts of the concrete, and the density and particle size of aggregates in the concrete had a significant impact on the chloride concentration.

MATERIALS AND STRUCTURES (2022)

Article Mechanics

Numerical modelling of electrochemical deposition techniques for healing concrete damaged by alkali silica reaction

Qing-Feng Liu et al.

Summary: In this study, the entire process from alkali silica reaction (ASR)-induced concrete cracking to crack repair by electro-chemical deposition method (EDM) is studied for the first time. The proposed model accurately predicts the consumption and interactions of different ionic species, as well as the crack closure status and time-dependent porosity and diffusion coefficients during the treatment.

ENGINEERING FRACTURE MECHANICS (2022)

Article Construction & Building Technology

Evaluating the chloride permeability of steel-concrete interface based on concretes of different stability

Yuxin Cai et al.

Summary: The study introduced a new experimental method called chloride penetration depth test to evaluate the chloride permeability along the steel-concrete interface. By using this method on two types of concrete with different stability, the researchers found that the chloride penetration depth increased with the defect size in the steel-concrete interface, demonstrating the effectiveness of the proposed method in identifying chloride permeability.

STRUCTURAL CONCRETE (2021)

Article Construction & Building Technology

Prediction of chloride diffusivity in concrete using artificial neural network: Modelling and performance evaluation

Qing-feng Liu et al.

Summary: This study developed a predictive model for chloride diffusion coefficient of concrete using artificial neural network (ANN) technique, which showed strong prediction potential. The performance of the model was assessed through normalization of variables and in-depth statistical error analysis, indicating its robustness and reliability.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Engineering, Civil

Electrochemical deposition method for load-induced crack repair of reinforced concrete structures: A numerical study

Zhaozheng Meng et al.

Summary: This study conducted a comprehensive numerical analysis of key processes in electrochemical deposition treatment, revealing their fundamental mechanisms. A multi-phase cracking model was developed, and the interactions among ions in concrete composites were elaborated. The results showed that a current density of 0.5 A/m(2) had the best repair effect, but the chloride removal efficiency was not ideal, while increasing ambient temperature could promote crack repair rate.

ENGINEERING STRUCTURES (2021)

Article Construction & Building Technology

Micromechanical analysis of interfacial transition zone in alkali-activated fly ash-slag concrete

Guohao Fang et al.

Summary: This study systematically investigates the micromechanical properties of the interfacial transition zone (ITZ) in alkali-activated fly ash-slag (AAFS) concrete, revealing that the properties depend on the chemical composition of reaction products and microstructural characteristics, with the evolution divided into three stages.

CEMENT & CONCRETE COMPOSITES (2021)

Article Construction & Building Technology

Numerical investigation of external sulfate attack and its effect on chloride binding and diffusion in concrete

Cheng-lin Zhang et al.

Summary: This study proposes a coupled model to investigate the deterioration of RC structures subjected to the dual attacks of chlorides and sulfates, which is validated against third-party experimental data. The effect of external sulfate attack (ESA) on chloride binding and diffusion is discussed, while factors such as solution concentration, immersion time, curing time, and water-cement ratio are elaborated on how they impact sulfate attack on chloride transport.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Assessing alkali-activated concrete performance in chloride environments using NT Build 492

Amin Noushini et al.

Summary: The study aims to establish performance-based criteria for GPCs in marine environments using NT Build 492 and ASTM C1556 test protocols. Experimental results show a good correlation between chloride migration coefficients (NT Build 492) and chloride diffusion coefficients (ASTM C1556). Furthermore, the chloride concentration used to calculate the chloride migration coefficients in NT Build 492 has been recalibrated for the chemistry of GPCs pore solution.

MATERIALS AND STRUCTURES (2021)

Article Chemistry, Physical

Novel Ca-SLS-LDH nanocomposites obtained via lignosulfonate modification for corrosion protection of steel bars in simulated concrete pore solution

Mengzhu Chen et al.

Summary: The novel nanocomposite Ca-SLS-LDH, modified with SLS on Ca-LDH, has a larger specific surface area and smaller average particle size compared to Ca-LDH, enabling it to more effectively bind chlorides for use in reinforced concrete. Mechanistically, Ca-SLS-LDH binds to chlorides through ion exchange and surface adsorption, similar to Ca-LDH, and shows a stronger inhibitory effect on carbon steel corrosion in simulated concrete pore solution.

APPLIED CLAY SCIENCE (2021)

Article Construction & Building Technology

An experimental and numerical investigation of coarse aggregate settlement in fresh concrete under vibration

Yuxin Cai et al.

Summary: The vibration time has the greatest effect on CA settlement, followed by the particle size of CAs, whereas the density of CAs and the plastic viscosity of mixtures contribute a little compared with the aforementioned factors. The validity of prediction results is well verified through experimental tests.

CEMENT & CONCRETE COMPOSITES (2021)

Article Construction & Building Technology

On the competitive antagonism effect in combined chloride-sulfate attack: A numerical exploration

Yuguo Yu et al.

Summary: This paper explores the competitive antagonism effect of the combined chloride-sulfate attack on concrete using a chemo-physical-mechanical method and thermodynamic modeling. Numerical modeling of reported tests demonstrates the effectiveness of the method in interpreting opposing experimental outcomes, while a novel assessment criterion is proposed and supported through a carefully designed illustrative example. Unique findings and implications for future engineering practices are revealed through numerical exploration.

CEMENT AND CONCRETE RESEARCH (2021)

Article Construction & Building Technology

Chemical and physical effects of high-volume limestone powder on sodium silicate-activated slag cement (AASC)

Xiaohong Zhu et al.

Summary: This study focuses on the physical and chemical influence of limestone powder (LS) on the AAS system. The addition of 50% LS was found to improve the fluidity and setting time of AAS pastes, while reducing the drying shrinkage of AAS mortars. However, it also led to a decrease in mechanical properties and had an impact on the pore structure.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Review Construction & Building Technology

Review on corrosion of steel reinforcement in alkali-activated concretes in chloride-containing environments

Walid Tahri et al.

Summary: This paper reviews recent studies on the steel corrosion behavior of alkali-activated concretes (AACs) and highlights the transport of chloride and chloride binding in AACs. The purpose is to demonstrate the steel corrosion resistance of AACs in comparison to Portland cement concrete, discussing their advantages and disadvantages.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Free and bound chloride relationships affecting reinforcement cover in alkali activated concrete

P. S. Mangat et al.

CEMENT & CONCRETE COMPOSITES (2020)

Article Construction & Building Technology

Modelling chloride transport in alkali-activated slags

Shishir Mundra et al.

CEMENT AND CONCRETE RESEARCH (2020)

Article Construction & Building Technology

Characteristics of the steel-concrete interface and their effect on the corrosion of steel bars in concrete

Yuxin Cai et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Engineering, Multidisciplinary

Influences of multiple factors on the chloride diffusivity of the interfacial transition zone in concrete composites

Linjian Wu et al.

COMPOSITES PART B-ENGINEERING (2020)

Article Engineering, Multidisciplinary

New insights into the early reaction of NaOH-activated slag in the presence of CaSO4

Dengquan Wang et al.

COMPOSITES PART B-ENGINEERING (2020)

Article Construction & Building Technology

Chloride diffusion in alkali-activated fly ash/slag concretes: Role of slag content, water/binder ratio, alkali content and sand-aggregate ratio

Jingxiao Zhang et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Optimization on the piezoresistivity of alkali-activated fly ash/slag mortar by using conductive aggregates and carbon fibers

Yuwei Ma et al.

CEMENT & CONCRETE COMPOSITES (2020)

Article Construction & Building Technology

Effect of curing conditions on the pore solution and carbonation resistance of alkali-activated fly ash and slag pastes

Marija Nedeljkovic et al.

CEMENT AND CONCRETE RESEARCH (2019)

Article Construction & Building Technology

Numerical study of carbonation and its effect on chloride binding in concrete

Xiao-han Shen et al.

CEMENT & CONCRETE COMPOSITES (2019)

Article Engineering, Multidisciplinary

Accurate determination of the time-zero of autogenous shrinkage in alkali-activated fly ash/slag system

Y. Ma et al.

COMPOSITES PART B-ENGINEERING (2019)

Article Construction & Building Technology

Chloride binding of alkali-activated slag/fly ash cements

Jian Zhang et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Construction & Building Technology

Pore solution composition of alkali-activated slag/fly ash pastes

Yibing Zuo et al.

CEMENT AND CONCRETE RESEARCH (2019)

Article Construction & Building Technology

Influence of superplasticizers and retarders on the workability and strength of one-part alkali-activated fly ash/slag binders cured at room temperature

Sajjad Yousefi Oderji et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Construction & Building Technology

Alkali-activated materials

John L. Provis

CEMENT AND CONCRETE RESEARCH (2018)

Article Materials Science, Ceramics

Impact of activator chemistry on permeability of alkali-activated slags

Anna Blyth et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2017)

Review Engineering, Marine

Durability of concrete structures in tropical atoll environment

Hongfa Yu et al.

OCEAN ENGINEERING (2017)

Article Materials Science, Multidisciplinary

Chloride ingress and steel corrosion in geopolymer concrete based on long term tests

Chandani Tennakoon et al.

MATERIALS & DESIGN (2017)

Article Construction & Building Technology

Chloride-induced corrosion of steel rebars in simulated pore solutions of alkali-activated concretes

Shishir Mundra et al.

CEMENT AND CONCRETE RESEARCH (2017)

Article Construction & Building Technology

Drying shrinkage and cracking resistance of concrete made with ternary cementitious components

Xiang Hu et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Construction & Building Technology

Influence of the slag content on the chloride and sulfuric acid resistances of alkali-activated fly ash/slag paste

N. K. Lee et al.

CEMENT & CONCRETE COMPOSITES (2016)

Article Construction & Building Technology

Chloride-induced corrosion of reinforcement in low-calcium fly ash-based geopolymer concrete

M. Babaee et al.

CEMENT AND CONCRETE RESEARCH (2016)

Article Engineering, Multidisciplinary

Optimum design of alkali activated slag concretes for the low oxygen/chloride ion permeability and thermal conductivity

Mtizeyyen Balcikanli et al.

COMPOSITES PART B-ENGINEERING (2016)

Article Engineering, Multidisciplinary

Towards a realistic morphological model for the meso-scale mechanical and transport behavior of cementitious composites

Davood Niknezhad et al.

COMPOSITES PART B-ENGINEERING (2015)

Article Materials Science, Multidisciplinary

Use of a multi-species reactive transport model to simulate chloride ingress in mortar exposed to NaCl solution or sea-water

M. M. Jensen et al.

COMPUTATIONAL MATERIALS SCIENCE (2015)

Article Construction & Building Technology

Modification of phase evolution in alkali-activated blast furnace slag by the incorporation of fly ash

Idawati Ismail et al.

CEMENT & CONCRETE COMPOSITES (2014)

Article Construction & Building Technology

Fly ash-based geopolymers: The relationship between composition, pore structure and efflorescence

Zuhua Zhang et al.

CEMENT AND CONCRETE RESEARCH (2014)

Article Construction & Building Technology

Quantification of chloride diffusion in fly ash-slag-based geopolymers by X-ray fluorescence (XRF)

Tao Yang et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Article Construction & Building Technology

Durability of alkali-activated fly ash concrete: Chloride penetration in pastes and mortars

Huajun Zhu et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Article Construction & Building Technology

Influence of fly ash on the water and chloride permeability of alkali-activated slag mortars and concretes

Idawati Ismail et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Article Construction & Building Technology

X-ray microtomography shows pore structure and tortuosity in alkali-activated binders

John L. Provis et al.

CEMENT AND CONCRETE RESEARCH (2012)

Article Construction & Building Technology

Ion-cement hydrate interactions govern multi-ionic transport model for cementitious materials

Y. Elakneswaran et al.

CEMENT AND CONCRETE RESEARCH (2010)

Article Construction & Building Technology

Analytical solution for the chloride diffusivity of hardened cement paste

Jianjun Zheng et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2008)

Article Construction & Building Technology

Hydration of alkali-activated slag: comparison with ordinary Portland cement

A. Gruskovnjak et al.

ADVANCES IN CEMENT RESEARCH (2006)

Article Construction & Building Technology

The coexistence of geopolymeric gel and calcium silicate hydrate at the early stage of alkaline activation

CK Yip et al.

CEMENT AND CONCRETE RESEARCH (2005)

Article Construction & Building Technology

Long-term testing of the chloride-penetration resistance of concrete containing high-reactivity metakaolin

A Boddy et al.

CEMENT AND CONCRETE RESEARCH (2001)

Article Construction & Building Technology

The ITZ in concrete - a different view based on image analysis and SEM observations

S Diamond et al.

CEMENT & CONCRETE COMPOSITES (2001)

Article Construction & Building Technology

Chloride diffusion in ordinary, blended, and alkali-activated cement pastes and its relation to other properties

DM Roy et al.

CEMENT AND CONCRETE RESEARCH (2000)