☆ 4.1 Article

Metal recovery from spent Ni-Mo-V hydrodesulphurisation catalyst in oxalic acid media by mechanochemical treatment

CANADIAN METALLURGICAL QUARTERLY (2023)

Related references

Note: Only part of the references are listed.

Article Metallurgy & Metallurgical Engineering

Separation and Recovery of Vanadium, Nickel, and Aluminum from Acid Leaching Solution of Spent Hydrodesulfurization Catalyst by a Solvent Extraction-Oxalic Acid Precipitation Process

Jinrong Ju et al.

Summary: In this paper, a solvent extraction-oxalic acid precipitation process was studied for the efficient recovery of vanadium, nickel, and aluminum from the acid leaching solution of spent hydrodesulfurization catalyst. The process conditions for extracting vanadium with Cyanex 272 and precipitating nickel using oxalic acid were explored. The results showed high extraction efficiency for vanadium and selective extraction of nickel from the solution containing a high concentration of aluminum. The proposed flowsheet may provide a new idea for the comprehensive recovery of valuable metals.

MINING METALLURGY & EXPLORATION (2023)

Add to Collection

Article Metallurgy & Metallurgical Engineering

A leaching, solvent extraction, stripping, precipitation and calcination process for the recovery of MoO3 and NiO from spent hydrofining catalysts

Yaxing Han et al.

Summary: This study proposes a hydrometallurgical process for the selective recovery of MoO3 and NiO from spent hydrofining catalysts. The valuable metals were leached with H2SO4 and H2O2, resulting in high dissolution efficiencies. Bis-(2-ethylhexy)phosphinic acid was chosen as the extractant for Mo due to its higher separation factors. A synergistic extraction system was employed to extract Ni, with extraction efficiencies of more than 99.9%. The two oxides MoO3 and NiO were successfully prepared from the stripping solution.

HYDROMETALLURGY (2023)

Add to Collection

Article Geochemistry & Geophysics

Selective Leaching of Valuable Metals from Spent Fluid Catalytic Cracking Catalyst with Oxalic Acid

Dalong Zheng et al.

Summary: The leaching of spent fluid catalytic cracking (SFCC) catalyst in oxalic acid solution allows for comprehensive utilization, with the resulting residue being considered non-hazardous material suitable for the preparation of geopolymers.

MINERALS (2022)

Add to Collection

Review Green & Sustainable Science & Technology

A review of metallurgical processes and purification techniques for recovering Mo, V, Ni, Co, Al from spent catalysts

Xin Liang et al.

Summary: The recovery of valuable metals from spent catalysts has become a focus of research due to industrialization and depleting ore resources. Among the three methods - hydrometallurgy, pyrometallurgy, and pyro-hydrometallurgy - pyro-hydrometallurgy seems to be the best choice as it combines the advantages of both pyrometallurgy and hydrometallurgy. It retains selectivity to metals like nickel and iron, reduces processing difficulty, and has high purity and selectivity when separating and purifying the leached valuable metals, making it a noteworthy technology.

JOURNAL OF CLEANER PRODUCTION (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Recovery of Zn as ZnO from Steelmaking Waste Materials by Mechanochemical Leaching, Solvent Extraction, Precipitation, and Thermal Decomposition Route

Ahmet Orkun Kalpakli et al.

Summary: A large amount of EAFD, a hazardous waste from steelmaking, contains zinc. This study investigated the recovery of Zn as ZnO from EAFD through mechanochemical leaching, solvent extraction, precipitation, and thermal decomposition. Optimal leaching parameters and efficient extraction and precipitation processes were determined to obtain high-purity ZnO.

JOURNAL OF SUSTAINABLE METALLURGY (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Leaching Kinetics of Mo, Ni, and Al Oxides from Spent Nickel-Molybdenum Hydrodesulfurization Catalyst in H2SO4 Solution

Sedat Ilhan et al.

Summary: The leaching efficiency of spent Ni-Mo hydrodesulfurization catalyst was investigated by studying the effects of grinding, stirring speed, H2SO4 concentration, and temperature. The leaching behavior and kinetics of MoO3, NiMoO4, Al2O3, and AlPO4 from the spent catalyst were determined. The apparent activation energy values for the leaching of MoO3, NiMoO4, Al2O3, and AlPO4 in H2SO4 solutions were calculated.

JOURNAL OF SUSTAINABLE METALLURGY (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Recovery of molybdenum, cobalt and nickel from spent hydrodesulphurization catalyst through oxidizing roast followed by sodium persulfate leaching

Hasan Arslanoglu et al.

Summary: The study aimed to achieve high-yield recovery of Ni, Mo and Co by removing the carbon from the spent HDS catalyst structure and converting the metal oxides to soluble form through a leaching process after roasting pre-treatment. The liquid film diffusion control mechanism was found to best represent the leaching process, with low activation energy values (<20 kJ/mol) indicating that the process is controlled by liquid film diffusion.

SUSTAINABLE MATERIALS AND TECHNOLOGIES (2021)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Extraction of molybdenum, nickel and aluminium from spent Ni-Mo hydrodesulphurization (HDS) catalyst in oxalic acid solutions

Sedat Ilhan

CANADIAN METALLURGICAL QUARTERLY (2020)

Add to Collection

Article Engineering, Chemical

Oxalic acid is more efficient than sulfuric acid for rock phosphate solubilization

Gilberto de Oliveira Mendes et al.

MINERALS ENGINEERING (2020)

Add to Collection

Review Engineering, Chemical

Metal Recovery Using Oxalate Chemistry: A Technical Review

Ankit Verma et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Kinetics of celestite conversion to acidic strontium oxalate hydrate in aqueous solution of oxalic acid

Mert Zoraga et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2019)

Add to Collection

Article Engineering, Chemical

Sodium peroxide fusion for reliable determination of gold in ores and metallurgical samples

Lou Daniel et al.

INTERNATIONAL JOURNAL OF MINERAL PROCESSING (2017)

Add to Collection

Article Engineering, Electrical & Electronic

The Effects of Vanadium Pentoxide to Oxalic Acid Ratio and Different Atmospheres on the Formation of VO2 Nanopowders Synthesized via Sol-Gel Method

Mohsen Fallah Vostakola et al.

JOURNAL OF ELECTRONIC MATERIALS (2017)

Add to Collection

Article Engineering, Chemical

Mechanochemistry in Technology: From Minerals to Nanomaterials and Drugs

Peter Balaz et al.

CHEMICAL ENGINEERING & TECHNOLOGY (2014)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Separation of molybdenum and vanadium from acid solutions by ion exchange

Thi Hong Nguyen et al.

HYDROMETALLURGY (2013)

Add to Collection

Article Engineering, Environmental

Kinetics of Mo, Ni, V and Al leaching from a spent hydrodesulphurization catalyst in a solution containing oxalic acid and hydrogen peroxide

Anna Szymczycha-Madeja

JOURNAL OF HAZARDOUS MATERIALS (2011)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Mechanochemical leaching of sphalerite in an alkaline solution containing lead carbonate

Zhang Chenglong et al.

HYDROMETALLURGY (2009)

Add to Collection

Article Engineering, Environmental

Hydrometallurgical route to recover molybdenum, nickel, cobalt and aluminum from spent hydrotreating catalysts in sulphuric acid medium

Ivam Macedo Valverde et al.

JOURNAL OF HAZARDOUS MATERIALS (2008)

Add to Collection

Article Engineering, Environmental

Metal recovery from spent hydrodesulfurization catalysts using a combined acid-leaching and electrolysis process

Yi-Chieh Lai et al.

JOURNAL OF HAZARDOUS MATERIALS (2008)

Add to Collection

Review Engineering, Environmental

Spent catalyst waste management: A review - Part I - Developments in hydroprocessing catalyst waste reduction and use

M. Marafi et al.

RESOURCES CONSERVATION AND RECYCLING (2008)

Add to Collection

Article Engineering, Environmental

Two stage leaching of activated spent HDS catalyst and solvent extraction of aluminium using organo-phosphinic extractant, Cyanex 272

Kyung Ho Park et al.

JOURNAL OF HAZARDOUS MATERIALS (2007)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Mechano-chemical leaching in hydrometallurgy of complex sulphides

Peter Balaz et al.

HYDROMETALLURGY (2006)

Add to Collection

Article Engineering, Chemical

Hydrometallurgical processing and recovery of molybdenum trioxide from spent catalyst

Kyung Ho Park et al.

INTERNATIONAL JOURNAL OF MINERAL PROCESSING (2006)

Add to Collection

Article Engineering, Chemical

Investigations on the extraction of molybdenum and vanadium from ammonia leaching residue of spent catalyst

Y Chen et al.

INTERNATIONAL JOURNAL OF MINERAL PROCESSING (2006)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Metals recovery from spent hydrotreatment catalysts in a fluoride-bearing medium

TS de Lima et al.

HYDROMETALLURGY (2005)

Add to Collection

Article Chemistry, Multidisciplinary

Synthesis of ZnFe2O4 nanocrystallites by mechanochemical reaction

HM Yang et al.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2004)

Add to Collection

Article Engineering, Environmental

Recovery of heavy metals and stabilization of spent hydrotreating catalyst using a glass-ceramic matrix

DD Sun et al.

JOURNAL OF HAZARDOUS MATERIALS (2001)

Add to Collection

Article Engineering, Chemical

Mechanochemical processing of gold-bearing sulphides

NJ Welham

MINERALS ENGINEERING (2001)

Add to Collection

Article Agronomy

Evaluation of oxalate/oxalic acid for extracting plant available phosphorus in unfertilized acid soils

AM Fransson

COMMUNICATIONS IN SOIL SCIENCE AND PLANT ANALYSIS (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.