Related references
Note: Only part of the references are listed.An extreme gradient boosting technique to estimate TBM penetration rate and prediction platform
Yaxu Wang et al.
BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2022)
Correlation Analysis of Machine Performance Parameters and Rock Mass Properties during Tunnel Boring Machine Excavation Process: A Case Study in Yin-song Headrace Tunnel, China
Yalong Jiang et al.
JOURNAL OF TESTING AND EVALUATION (2022)
Investigations on the influence of rock and machine characteristics on coring rates in vertical and mildly inclined exploration drilling in complex coal bearing rock formation
P. Alam et al.
GEOMECHANICS AND GEOPHYSICS FOR GEO-ENERGY AND GEO-RESOURCES (2022)
Physical and Numerical Evaluation of Mode II Fracture of Quasi-Brittle Materials
M. Afrazi et al.
INTERNATIONAL JOURNAL OF CIVIL ENGINEERING (2022)
Experimental Study of the Effect of Length and Angle of Cross-Cracks on Tensile Strength of Rock-Like Material
Aida Erfanian Pour et al.
IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF CIVIL ENGINEERING (2022)
Influence of Static and Dynamic Rock Properties on Drillability Prognosis for Mining and Tunnelling Projects
B. N. V. Siva Prasad et al.
INDIAN GEOTECHNICAL JOURNAL (2022)
Success and challenges in predicting TBM penetration rate using recurrent neural networks
Feng Shan et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2022)
Developing hybrid ELM-ALO, ELM-LSO and ELM-SOA models for predicting advance rate of TBM
Chuanqi Li et al.
TRANSPORTATION GEOTECHNICS (2022)
TBM performance analysis in very strong and massive rocks; case study: Kerman water conveyance tunnel project, Iran
Seyed Mahdi Pourhashemi et al.
GEOMECHANICS AND GEOENGINEERING-AN INTERNATIONAL JOURNAL (2022)
Actual performance analysis of a double shield TBM through sedimentary and low to medium grade metamorphic rocks of Ghomrood water conveyance tunnel project (lots 3 and 4)
Jafar Hassanpour et al.
BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2021)
Prediction of TBM performance in fresh through weathered granite using empirical and statistical approaches
Danial Jahed Armaghani et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2021)
Intelligent decision method for main control parameters of tunnel boring machine based on multi-objective optimization of excavation efficiency and cost
Bin Liu et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2021)
TBM performance prediction developing a hybrid ANFIS-PNN predictive model optimized by imperialism competitive algorithm
Hooman Harandizadeh et al.
NEURAL COMPUTING & APPLICATIONS (2021)
Characteristics Analysis of Generalized Rock Quality Designation (RQD) Based on Degree of Joint Development
Lin Jun et al.
ADVANCES IN CIVIL ENGINEERING (2021)
Development of a new hybrid ANN for solving a geotechnical problem related to tunnel boring machine performance
Mohammadreza Koopialipoor et al.
ENGINEERING WITH COMPUTERS (2020)
Forecasting of TBM advance rate in hard rock condition based on artificial neural network and genetic programming techniques
Jian Zhou et al.
BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2020)
Prediction of rock mass parameters in the TBM tunnel based on BP neural network integrated simulated annealing algorithm
B. Liu et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2020)
Artificial neural network model for predicting the density of oil-based muds in high-temperature, high-pressure wells
Okorie E. Agwu et al.
JOURNAL OF PETROLEUM EXPLORATION AND PRODUCTION TECHNOLOGY (2020)
Predicting mobile wallet resistance: A two-staged structural equation modeling-artificial neural network approach
Lai-Ying Leong et al.
INTERNATIONAL JOURNAL OF INFORMATION MANAGEMENT (2020)
Application of deep neural networks in predicting the penetration rate of tunnel boring machines
Mohammadreza Koopialipoor et al.
BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2019)
Influence of Joint Conditions and Blast Design on Pre-split Blasting Using Response Surface Analysis
A. K. Raina
ROCK MECHANICS AND ROCK ENGINEERING (2019)
Comprehensive ahead prospecting for hard rock TBM tunneling in complex limestone geology: A case study in Jilin, China
Bin Liu et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2019)
The Hoek-Brown failure criterion and GSI - 2018 edition
E. Hoek et al.
JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2019)
Application of several optimization techniques for estimating TBM advance rate in granitic rocks
Danial Jahed Armaghani et al.
JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2019)
Development of hybrid intelligent models for predicting TBM penetration rate in hard rock condition
Danial Jahed Armaghani et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2017)
Rock quality designation (RQD): time to rest in peace
P. J. Pells et al.
CANADIAN GEOTECHNICAL JOURNAL (2017)
Double shield TBM performance analysis in difficult ground conditions: a case study in the Gerede water tunnel, Turkey
Aydin Shaterpour-Mamaghani et al.
BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2016)
Evaluation of common TBM performance prediction models based on field data from the second lot of Zagros water conveyance tunnel (ZWCT2)
J. Hassanpour et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2016)
Prediction of Flyrock Distance in Open Pit Blasting Using Surface Response Analysis
A. K. Raina et al.
GEOTECHNICAL AND GEOLOGICAL ENGINEERING (2016)
Scaled Conjugate Gradient Based Adaptive ANN Control for SVM-DTC Induction Motor Drive
Lochan Babani et al.
ARTIFICIAL INTELLIGENCE APPLICATIONS AND INNOVATIONS, AIAI 2016 (2016)
Predicting penetration rate of hard rock tunnel boring machine using fuzzy logic
Ebrahim Ghasemi et al.
BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2014)
A support vector regression model for predicting tunnel boring machine penetration rates
Satar Mahdevari et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2014)
Estimating torque, thrust and other design parameters of different type TBMs with some criticism to TBMs used in Turkish tunneling projects
Ugur Ates et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2014)
Introduction of an empirical TBM cutter wear prediction model for pyroclastic and mafic igneous rocks; a case history of Karaj water conveyance tunnel, Iran
J. Hassanpour et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2014)
A new model for TBM performance prediction in blocky rock conditions
A. Delisio et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2014)
Study of the influence of geotechnical parameters on the TBM performance in Tehran-Shomal highway project using ANN and SPSS
S. R. Torabi et al.
ARABIAN JOURNAL OF GEOSCIENCES (2013)
Study of various models for estimation of penetration rate of hard rock TBMs
Ebrahim Farrokh et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2012)
Prediction of hard rock TBM penetration rate using particle swarm optimization
Saffet Yagiz et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2011)
A new hard rock TBM performance prediction model for project planning
J. Hassanpour et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2011)
TBM Performance Analysis in Pyroclastic Rocks: A Case History of Karaj Water Conveyance Tunnel
J. Hassanpour et al.
ROCK MECHANICS AND ROCK ENGINEERING (2010)
Application of two non-linear prediction tools to the estimation of tunnel boring machine performance
S. Yagiz et al.
ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE (2009)
Development of a rock mass characteristics model for TBM penetration rate prediction
Q. M. Gong et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2009)
Developing new equations for TBM performance prediction in carbonate-argillaceous rocks: a case history of Nowsood water conveyance tunnel
J. Hassanpour et al.
GEOMECHANICS AND GEOENGINEERING-AN INTERNATIONAL JOURNAL (2009)
Response by the authors to R.M. Goktan discussion to the paper: Q.M. Gong and J.Zhao (2007). Influence of rock brittleness on TBM penetration rate in Singapore granite, Tunnelling and Underground Space Technology, Vol. 22, pp. 317-324
Q. M. Gong et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2008)
Utilizing rock mass properties for predicting TBM performance in hard rock condition
Saffet Yagiz
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2008)
An approach for determining relative input parameter importance and significance in artificial neural networks
Stanley J. Kemp et al.
ECOLOGICAL MODELLING (2007)
Prediction model of tunnel boring machine performance by ensemble neural networks
Zhiye Zhao et al.
GEOMECHANICS AND GEOENGINEERING-AN INTERNATIONAL JOURNAL (2007)
Measurements of and correlations between block size and rock quality designation (RQD)
A Palmstrom
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2005)
Influence of rock mass parameters on the performance of a TBM in a gneissic formation (Varzo tunnel)
R Ribacchi et al.
ROCK MECHANICS AND ROCK ENGINEERING (2005)
TBM performance estimation using rock mass classifications
M Sapigni et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2002)
Variable selection using neural-network models
G Castellano et al.
NEUROCOMPUTING (2000)