☆ 4.7 Article

Effect of fin width ratio on thermal performance of fin based-heat sink with phase change materials

APPLIED THERMAL ENGINEERING (2023)

Related references

Note: Only part of the references are listed.

Article Thermodynamics

Experimental performance of a LED thermal management system with suspended microencapsulated phase change material

Jiarong Ye et al.

Summary: This study experimentally demonstrated the improvement of thermal management in LED by using microencapsulated phase change material (MPCM) suspension as coolant. The research found that different concentrations of MPCM suspension have varying effects on cooling performance, and the thermophysical and phase change properties of MPCM play critical roles.

APPLIED THERMAL ENGINEERING (2022)

Add to Collection

Review Construction & Building Technology

A critical review on phase change materials (PCM) for sustainable and energy efficient building: Design, characteristic, performance and application

Xiaonan Wang et al.

Summary: This paper comprehensively reviews and discusses the characteristics, design and application methods of Phase Change Materials (PCMs) in building construction, as well as their effects on energy consumption and construction reliability. Promising research directions and areas for optimization are proposed, along with the future development and potential applications of PCMs in buildings.

ENERGY AND BUILDINGS (2022)

Add to Collection

Article Thermodynamics

Enhanced thermal performance of phase change material-integrated fin-type heat sinks for high power electronics cooling

Su Ho Kim et al.

Summary: The enhanced cooling performance of a phase change material (PCM)-integrated fin-type heat sink is reported in high power electronics. By embedding a phase change composite into the base plate of the heat sink, the thermal capacitive effects and excellent heat spreading characteristics of PCM are effectively utilized for thermal management. Experimental and numerical investigations show that the PCM-integrated fin-type heat sink can effectively delay the temperature rise of hot spots, demonstrating its potential for use in convection-limited cooling environments.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

Add to Collection

Article Thermodynamics

Thermal management characteristics of a counter-intuitive finned heat sink incorporating detached fins impregnated with a high thermal conductivity-low melting point PCM

Salah Addin Burhan Al-Omari et al.

Summary: This study investigates the thermal management characteristics and heat dissipation performance of a heat sink filled with gallium using a novel concept of lifting the bottom ends of the fins instead of attaching them to the base. The results show the benefits of fin lifting and its impact on the internal motions within the gallium and overall performance of the heat sink.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2022)

Add to Collection

Article Energy & Fuels

Thermal performance of a phase change material-based heat sink in presence of nanoparticles and metal-foam to enhance cooling performance of electronics

Adeel Arshad et al.

Summary: This study investigates the parametric investigation of a heat sink filled with different materials and parameters for effective passive thermal management of electronics. The addition of Cu nanoparticles and MF in the heat sink increased the rate of heat transfer and reduced the melting time.

JOURNAL OF ENERGY STORAGE (2022)

Add to Collection

Article Thermodynamics

The effect of a new design preheating unit integrated to graphite matrix composite with phase change battery thermal management in low-temperature environment: An experimental study

Mustafa Yusuf Yazici

Summary: This study reports on an experimental investigation of a new hybrid preheating unit for small-scale li-ion modules exposed to low-temperature conditions. The results show that the preheating unit has a significant impact on the operation temperature, discharge, and energy capacity, improving the lifespan and safety of the li-ion modules.

THERMAL SCIENCE AND ENGINEERING PROGRESS (2022)

Add to Collection

Article Thermodynamics

An experimental investigation of a PCM-based heat sink enhanced with a topology-optimized tree-like structure

J. Y. Ho et al.

Summary: A new PCM-based heat sink design was developed using a topology optimization strategy, resulting in enhanced thermal performance and extended operational time. Experimental results showed that the tree-like structure heat sink achieved up to 4 degrees C lower wall temperatures compared to the conventional fin-structure heat sink, with best performance using RT35HC at low heat fluxes and RT44HC at high heat fluxes.

ENERGY CONVERSION AND MANAGEMENT (2021)

Add to Collection

Article Thermodynamics

Towards the thermal management of electronic devices: A parametric investigation of finned heat sink filled with PCM

Adeel Arshad et al.

Summary: This study conducted parametric investigation of a PCM filled plate-fin heat sink for thermal management of electronic components through numerical simulations. The results showed that PCM filled heat sink can reduce the base temperature and improve the melting uniformity of PCM, with higher fin height and number of fins contributing to lower base temperature.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Add to Collection

Review Chemistry, Physical

Research on passive cooling of electronic chips based on PCM: A review

Weisan Hua et al.

Summary: This paper reviews the theoretical basis and application progress of phase change materials (PCMs) in chip thermal management, including different types of PCMs, non-embedded cooling solutions, and research methods of embedded cooling.

JOURNAL OF MOLECULAR LIQUIDS (2021)

Add to Collection

Article Thermodynamics

Thermal management and temperature uniformity enhancement of electronic devices by micro heat sinks: A review

Ziqiang He et al.

Summary: Micro heat sinks are crucial for addressing the challenges of high heat flux and non-uniform temperature distribution in electronic devices. Developments in thermal enhancement technologies and reducing non-uniform temperature distribution are essential. An effective adaptive cooling method is urgently needed to improve the efficiency and lifespan of electronic components.

ENERGY (2021)

Add to Collection

Article Thermodynamics

Thermal reliability-based design optimization using Kriging model of PCM based pin fin heat sink

Khalil Dammak et al.

Summary: This study focuses on the thermal reliability optimization of a pin fin heat sink filled with phase change material, aiming to study the heat transfer performance for cooling electronic devices. The methodology combines 3D finite element simulation, Kriging substitution model, and optimization procedure to determine the optimum thermal configuration. The results show that the optimal design achieved a 30% reduction in maximum temperature through reliability optimization.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Construction & Building Technology

PCM-based passive air conditioner in urban houses for the tropical climates: An experimental analysis on the stratum air circulation

Surjamanto Wonorahardjo et al.

Summary: The study found that utilizing PCM and ITM-based passive air conditioning systems can effectively reduce energy consumption compared to traditional air conditioners, while improving the thermal environment quality in small urban houses under tropical climates.

BUILDING AND ENVIRONMENT (2021)

Add to Collection

Article Energy & Fuels

Investigation on thermal characteristics of nano enhanced phase change material based finned and unfinned heat sinks for thermal management system

Rohit Kothari et al.

Summary: This study investigates the combined effect of nanoparticle concentration and fin number in PCM-based heat sinks, finding that NePCM with lower nanoparticle concentration is effective for heat sinks with an SPT value of 60 degrees C. The results show the maximum enhancement ratio for unfinned HS with 2% nanoparticle concentration, reaching 1.48 for SPT of 60 degrees C.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2021)

Add to Collection

Article Thermodynamics

Introducing a novel heat sink comprising PCM and air - Adapted to electronic device thermal management

Rasool Kalbasi

Summary: The study introduced a novel hybrid heat sink filled with PCM and air to effectively reduce electronic device temperature. The hybrid heat sink outperformed both PCM-based and air-cooled heat sinks, especially as the convective coefficient increased.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

Novel inverted fin configurations for enhancing the thermal performance of PCM based thermal control unit: A numerical study

Akshaykumar N. Desai et al.

Summary: The study analyzed a PCM-based TCU with novel metallic fins to control the peak temperature of an electronic device, improving heat transfer efficiency. The novel inverted fins showed superior thermal performance at 25% mass, reaching initial temperature faster than other configurations.

APPLIED THERMAL ENGINEERING (2021)

Add to Collection

Article Thermodynamics

Experimental investigation on nanoalloy enhanced layered perovskite PCM tamped in a tapered triangular heat sink for satellite avionics thermal management

Cyril Reuben Raj et al.

Summary: The research analyzed the application of a novel heat sink design in avionic thermal management, incorporating a nanoalloy to enhance thermal conductivity and storage performance, showing significant temperature reduction effects in experiments.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Numerical and experimental analysis of the tilt angle's effects on the characteristics of the melting process of PCM-based as PV cell's backside heat sink

Abdulmunem R. Abdulmunem et al.

Summary: This study evaluates the impact of tilt angle on the characteristics of the melting process of PCM-based heat sink inside PV cells, showing that increasing tilt angle decreases PCM melting time and reduces overall PV cell temperature. The results demonstrate excellent agreement between experiments and numerical simulations, highlighting the importance of tilt angle in thermal management of PV cells.

RENEWABLE ENERGY (2021)

Add to Collection

Article Thermodynamics

Thermal energy storage performance of PCM/graphite matrix composite in a tube-in-shell geometry

M. Y. Yazici et al.

Summary: The experimental study focuses on the melting heat transfer performance and energy storage efficiency of PCM/graphite matrix in a tube-in-shell setup for solar thermal energy storage and waste heat recovery applications. The inlet temperature of the heat transfer fluid had a significant impact on the total melting time. The results indicated that the PCM/graphite matrix showed remarkable effects on phase change heat transfer, with enhanced thermal conductivity and reduced melting time compared to conventional units.

THERMAL SCIENCE AND ENGINEERING PROGRESS (2021)

Add to Collection

Article Thermodynamics

Numerical investigations of fin efficacy for phase change material (PCM) based thermal control module

Akshaykumar N. Desai et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Energy & Fuels

Investigation of a binary eutectic mixture of phase change material for building integrated photovoltaic (BIPV) system

A. Karthick et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2020)

Add to Collection

Article Engineering, Chemical

Performance enhancement of copper indium diselenide photovoltaic module using inorganic phase change material

Alagar Karthick et al.

ASIA-PACIFIC JOURNAL OF CHEMICAL ENGINEERING (2020)

Add to Collection

Article Thermodynamics

Thermal analysis of cylindrical heat sinks filled with phase change material for high-power transient cooling

Ju-Ho Jeong et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Thermodynamics

Transient simulation of finned heat sinks embedded with PCM for electronics cooling

Adeel Arshad et al.

THERMAL SCIENCE AND ENGINEERING PROGRESS (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Enhancing PV Cell's electrical efficiency using phase change material with copper foam matrix and multi-walled carbon nanotubes as passive cooling method

Abdulmunem R. Abdulmunem et al.

RENEWABLE ENERGY (2020)

Add to Collection

Review Energy & Fuels

The micro-/nano-PCMs for thermal energy storage systems: A state of art review

Adeel Arshad et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2019)

Add to Collection

Article Thermodynamics

Combined effects of inclination angle and fin number on thermal performance of a PCM-based heat sink

Mustafa Yusuf Yazici et al.

APPLIED THERMAL ENGINEERING (2019)

Add to Collection

Article Thermodynamics

Characterization of natural convection in a PCM-based heat sink with novel conductive structures

Jinlong Xie et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2019)

Add to Collection

Article Thermodynamics

An experimental study of enhanced heat sinks for thermal management using n-eicosane as phase change material

Adeel Arshad et al.

APPLIED THERMAL ENGINEERING (2018)

Add to Collection

Article Thermodynamics

Thermal management of electronics: An experimental analysis of triangular, rectangular and circular pin-fin heat sinks for various PCMs

Hafiz Muhammad Ali et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Add to Collection

Article Thermodynamics

Experimental investigation of PCM based round pin-fin heat sinks for thermal management of electronics: Effect of pin-fin diameter

Adeel Arshad et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Add to Collection

Review Thermodynamics

Thermal issues about Li-ion batteries and recent progress in battery thermal management systems: A review

Huaqiang Liu et al.

ENERGY CONVERSION AND MANAGEMENT (2017)

Add to Collection

Article Thermodynamics

Experimental passive electronics cooling: Parametric investigation of pin-fin geometries and efficient phase change materials

Muhammad Junaid Ashraf et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

Add to Collection

Article Thermodynamics

Experimental investigation of n-eicosane based circular pin-fin heat sinks for passive cooling of electronic devices

Hafiz Muhammad Ali et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

Add to Collection

Review Green & Sustainable Science & Technology

A critical review of traditional and emerging techniques and fluids for electronics cooling

S. M. Sohel Murshed et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

Add to Collection

Article Thermodynamics

Thermal performance of phase change material (PCM) based pin-finned heat sinks for electronics devices: Effect of pin thickness and PCM volume fraction

Adeel Arshad et al.

APPLIED THERMAL ENGINEERING (2017)

Add to Collection

Review Green & Sustainable Science & Technology

Application of TCE-PCM based heat sinks for cooling of electronic components: A review

Santosh Kumar Sahoo et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

Add to Collection

Article Thermodynamics

Experimental comparison between different configurations of PCM based heat sinks for cooling electronic components

Salma Gharbi et al.

APPLIED THERMAL ENGINEERING (2015)

Add to Collection

Article Energy & Fuels

Effect of eccentricity on melting behavior of paraffin in a horizontal tube-in-shell storage unit: An experimental study

M. Yusuf Yazici et al.

SOLAR ENERGY (2014)

Add to Collection

Article Energy & Fuels

Experimental investigation of inserts configurations and PCM type on the thermal performance of PCM based heat sinks

Saad Mahmoud et al.

APPLIED ENERGY (2013)

Add to Collection

Article Thermodynamics

Experimental investigations on phase change material based finned heat sinks for electronic equipment cooling

Rajesh Baby et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2012)

Add to Collection

Review Thermodynamics

Organic phase change materials and their textile applications: An overview

Nihal Sarier et al.

THERMOCHIMICA ACTA (2012)

Add to Collection

Article Thermodynamics

Experimental and numerical studies on performance of PCM-based heat sink with different configurations of internal fins

S. F. Hosseinizadeh et al.

APPLIED THERMAL ENGINEERING (2011)

Add to Collection

Review Multidisciplinary Sciences

Phase Change Materials: Technology Status and Potential Defence Applications

Ravindra Kumar et al.

DEFENCE SCIENCE JOURNAL (2011)

Add to Collection

Article Thermodynamics

Heat transfer correlations for PCM-based heat sinks with plate fins

S. K. Saha et al.

APPLIED THERMAL ENGINEERING (2010)

Add to Collection

Article Thermodynamics

Cooling of portable hand-held electronic devices using phase change materials in finned heat sinks

S. C. Fok et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2010)

Add to Collection

Article Thermodynamics

Transient cooling of electronics using phase change material (PCM)-based heat sinks

Ravi Kandasamy et al.

APPLIED THERMAL ENGINEERING (2008)

Add to Collection

Review Thermodynamics

Thermal management of electronics: A review of literature

S. S. Anandan et al.

THERMAL SCIENCE (2008)

Add to Collection

Review Green & Sustainable Science & Technology

Solar energy storage using phase change materials

Murat Kenisarin et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2007)

Add to Collection

Article Thermodynamics

A numerical model for heat sinks with phase change materials and thermal conductivity enhancers

KC Nayak et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2006)

Add to Collection

Article Thermodynamics

NASA thermal control technologies for robotic spacecraft

TD Swanson et al.

APPLIED THERMAL ENGINEERING (2003)

Add to Collection

Article Engineering, Manufacturing

A review of selected thermal management solutions for military electronic systems

DC Price

IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES (2003)

Add to Collection

Article Engineering, Electrical & Electronic

Transient thermal management of a handset using phase change material (PCM)

M Hodes et al.

JOURNAL OF ELECTRONIC PACKAGING (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.