4.7 Article

Robust high-performance self-lubrication of nanostructured Mo-S-Cu-B film

Related references

Note: Only part of the references are listed.
Article Engineering, Mechanical

Nano-mechanical and nano-tribological characterisation of self-lubricating MoS2 nano-structured coating for space applications

Sheikh Haris Mukhtar et al.

Summary: Tribological components play a crucial role in spacecraft, and solid-based lubricating materials offer a solution for space applications. This study investigates the nano-tribological and nano-mechanical behavior of a nano-structured MoS2 coating deposited on stainless steel. The results show that the coating has good friction performance and wear resistance, along with strong adhesion to the substrate.

TRIBOLOGY INTERNATIONAL (2023)

Article Nanoscience & Nanotechnology

Boundary Slip of Oil Molecules at MoS2 Homojunctions Governing Superlubricity

Jianfeng Li et al.

Summary: This study found that MoS2 homojunctions can achieve superlubricity with a 67% reduction in friction coefficient after the formation of a confined oil layer. The observation of boundary slip of oil molecules on the MoS2 crystal contributes to the extremely low shear strength and the achievement of superlubricity.

ACS APPLIED MATERIALS & INTERFACES (2022)

Article Chemistry, Multidisciplinary

High Performance Space Lubrication of MoS2 with Tantalum

Peter Series et al.

Summary: This article presents a novel MoS2 + tantalum lubricant coating that demonstrates adaptable performance in multiple environments, excelling as a lubricant in both terrestrial and space conditions.

ADVANCED FUNCTIONAL MATERIALS (2022)

Article Chemistry, Multidisciplinary

Operando Formation of Van der Waals Heterostructures for Achieving Macroscale Superlubricity on Engineering Rough and Worn Surfaces

Ruiyun Li et al.

Summary: This study reports a facile way to achieve robust macroscale superlubricity in a vacuum environment by forming graphene/transition-metal dichalcogenide (TMDC) heterostructures on wear-induced rough surfaces. The sandwich structures readily transform into graphene/TMDC heterostructures during running-in stage, and assemble into multipoint flake-like tribofilms to achieve macroscale superlubricity.

ADVANCED FUNCTIONAL MATERIALS (2022)

Article Chemistry, Physical

Macroscale superlubricity under ultrahigh contact pressure in the presence of layered double hydroxide nanosheets

Kunpeng Wang et al.

Summary: This research successfully achieved macroscale superlubricity under high contact pressures by introducing nanoadditives into an ionic liquid alcohol solution. Compared to micron-scale LDH particles, nanoscale LDH nanosheet additives exhibited better load-bearing capacity during superlubricity. The formation of a protective adsorption layer and ion distribution on the contact interface played a crucial role in the stability of superlubricity.

NANO RESEARCH (2022)

Article Chemistry, Physical

Shear-induced interfacial reconfiguration governing superlubricity of MoS2-Ag film enabled by diamond-like carbon

Jisen Tian et al.

Summary: This study investigates the robust superlubricity of a disulphide-based film or diamond-like carbon (DLC) coating in relation to interfacial nanostructures and environmental atmospheres. The study focuses on the frictional performances and underlying mechanisms governing superlubricity between them. By designing a periodically multilayered MoS2-Ag film, the researchers discovered a superior lubricating durability with a superlow friction coefficient triggered by the DLC film. Structural analysis of the contact areas revealed a deep amorphization transformation and the formation of a multiphase tribofilm. The findings shed light on the tribochemical mechanisms of the MoS2-Ag film and provide a new strategy for achieving macroscale superlubricity in disulphide-related lubricants.

APPLIED SURFACE SCIENCE (2022)

Article Materials Science, Coatings & Films

The effect of temperature on water desorption and oxide formation in MoS2 coatings and its impact on tribological properties

Kristine Dreva et al.

Summary: Molybdenum disulfide (MoS2) is widely used in aerospace applications due to its excellent tribological properties in vacuum. However, the mechanisms of MoS2 when exposed to varying temperatures in ambient atmosphere still require further research. This study investigated the effect of temperature on wear mechanisms in air by depositing MoS2 coatings on steel substrates and conducting friction and wear tests at increasing temperatures up to 75°C. The results showed that surface oxides did not impact the tribological properties of MoS2 at around 75°C, while water molecules at room temperature hindered the alignment of MoS2 layers, resulting in high friction and wear.

SURFACE & COATINGS TECHNOLOGY (2022)

Article Chemistry, Multidisciplinary

Macroscale Robust Superlubricity on Metallic NbB2

Jia Wang et al.

Summary: This study reports the discovery of robust superlubricity on hydrated NbB2 films, which exhibit extremely low friction and wear rates on macro-length and time scales. The synthesized NbB2 film also demonstrates sufficient electrical conductivity, extending the potential of superlubricity to metallic materials.

ADVANCED SCIENCE (2022)

Article Materials Science, Multidisciplinary

Synthesis and Characterization of Boron Thin Films Using Chemical and Physical Vapor Depositions

Bart Schurink et al.

Summary: This research focuses on the preparation and characterization of boron thin films using various physical and chemical deposition methods. The study found that boron films realized by plasma enhanced chemical vapor deposition (PECVD) exhibit excellent corrosion resistance and low defectivity, making them suitable for micro-fabrication applications.

COATINGS (2022)

Article Nanoscience & Nanotechnology

Dual-Phase Nanocomposite TiB2/MoS1.7B0.3: An Excellent Ultralow Friction and Ultralow Wear Self-Lubricating Material

Jingjie Pan et al.

Summary: By developing a dual-phase nanocomposite material, researchers have created a self-lubricating material with extremely low friction coefficient and wear rate, solving the challenges faced by traditional lubrication systems. Even after annealing, this material maintains excellent performance, aiming to meet the most challenging lubrication needs.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Nanoscience & Nanotechnology

Graphitic Encapsulation and Electronic Shielding of Metal Nanoparticles to Achieve Metal-Carbon Interfacial Superlubricity

Ruiyun Li et al.

Summary: This study presents a new approach to achieve superlubricity for DLC films by introducing metal nanoparticles on the films, which does not rely on the film preparation parameters. The metal nanoparticles control the structures of wear products and enable the formation of graphene-coated particles at the interface, leading to metal-carbon interfacial superlubricity with significant changes at the frictional interface.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Engineering, Mechanical

Improvement of the lubrication properties of grease with Mn3O4/graphene (Mn3O4#G) nanocomposite additive

Bao Jin et al.

Summary: The study found that compound grease with trace amounts of Mn3O4#G nanocomposite additives can significantly reduce the friction coefficient, while the microstructure of graphene tends to be ordered under high-temperature friction. Additionally, the synergistic effect of Mn3O4#G filling effect and graphene island effect also significantly improves lubrication properties.

FRICTION (2021)

Article Chemistry, Multidisciplinary

A New Pathway for Superlubricity in a Multilayered MoS2-Ag Film under Cryogenic Environment

Xuan Yin et al.

Summary: A fundamental cryogenic study in tribology identified a superlubricity state exhibited by a disulfide film, leading to the design of a multilayered MoS2-Ag film with extremely low friction coefficient in a cryogenic environment. The film's superlow friction coefficient of below 0.001 under high load at 170 K was attributed to the formation of MoS2-wrapped Ag nanoparticles at the sliding interface. This new type of solid lubricant film offers a novel solution for mechanical engineering applications in harsh working conditions.

NANO LETTERS (2021)

Article Materials Science, Ceramics

Adhesion strength and tribological property of self-lubricating Si/MoS2 nanocoating by pulsed laser deposition method

Summera Banday et al.

Summary: In this study, the Pulsed Laser Deposition (PLD) method was employed to deposit Si/MoS2 coating on an Al alloy substrate. The surface morphology of the coating materials was analyzed using Raman spectroscopy, Scanning Electron Microscopy (SEM), and X-ray diffraction (XRD) techniques. The scratch test results indicated that the Si/MoS2 coating exhibited self-lubricating properties and primarily underwent ductile and abrasive wear mechanisms.

CERAMICS INTERNATIONAL (2021)

Article Materials Science, Coatings & Films

Influence of substrate bias and temperature on the crystallization of metallic NbTaTiVZr high-entropy alloy thin films

Felipe Cemin et al.

Summary: Single-phase crystalline NbTaTiVZr high-entropy alloy thin films were successfully achieved through appropriate selection of alloying elements and synthesis conditions, leading to specific structural modifications and improved mechanical properties. Controlling synthesis variables such as substrate biasing and heating can eliminate traditional crystallization strategies and provide potential applications for high-entropy alloy thin films in the field of refractory coating materials.

SURFACE & COATINGS TECHNOLOGY (2021)

Article Materials Science, Coatings & Films

Turbulence-like Cu/MoS2 films: Structure, mechanical and tribological properties

W. D. Sun et al.

Summary: By doping metal atoms like Cu into MoS2 to form turbulence-like micro-nano structure, the hardness can be increased and the friction coefficient can be decreased, leading to improved mechanical and tribological properties for application in the atmosphere.

SURFACE & COATINGS TECHNOLOGY (2021)

Article Chemistry, Multidisciplinary

Preparation of two-dimensional molybdenum disulfide for NO2 detection at room temperature

Xin Yu et al.

CHINESE CHEMICAL LETTERS (2020)

Article Nanoscience & Nanotechnology

Mechanochemistry of Zinc Dialkyldithiophosphate on Steel Surfaces under Elastohydrodynamic Lubrication Conditions

Jie Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Review Engineering, Mechanical

A review of recent advances in tribology

Yonggang Meng et al.

FRICTION (2020)

Article Chemistry, Multidisciplinary

Toward Robust Macroscale Superlubricity on Engineering Steel Substrate

Panpan Li et al.

ADVANCED MATERIALS (2020)

Article Chemistry, Physical

A thermodynamic study on phase formation and thermal stability of AlSiTaTiZr high -entropy alloy thin films

Felipe Cemin et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Article Materials Science, Coatings & Films

Effect of boron content on the structure, mechanical and tribological properties of sputtered Mo-S-B films

W. D. Sun et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Article Materials Science, Coatings & Films

The effect of Si content on the structure and tribological performance of MoS2/Si coatings

Yizhuo Xu et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Article Chemistry, Physical

Structure, mechanical and tribological properties of Mo-S-N solid lubricant coatings

Tomas Hudec et al.

APPLIED SURFACE SCIENCE (2019)

Review Engineering, Mechanical

Solid Lubrication with MoS2: A Review

Mohammad R. Vazirisereshk et al.

LUBRICANTS (2019)

Article Chemistry, Multidisciplinary

The Self-Ordered Lamellar Texture of MoS2 Transfer Film Formed in Complex Lubrication

Kaiming Hou et al.

ADVANCED MATERIALS INTERFACES (2018)

Article Chemistry, Multidisciplinary

Superlubricity of Graphite Induced by Multiple Transferred Graphene Nanoflakes

Jinjin Li et al.

ADVANCED SCIENCE (2018)

Article Chemistry, Multidisciplinary

Superlubricity of Graphite Sliding against Graphene Nanoflake under Ultrahigh Contact Pressure

Jinjin Li et al.

ADVANCED SCIENCE (2018)

Article Multidisciplinary Sciences

Structural superlubricity and ultralow friction across the length scales

Oded Hod et al.

NATURE (2018)

Article Chemistry, Multidisciplinary

Nanocrystalline Graphite Formed at Fullerene-Like Carbon Film Frictional Interface

Jing Shi et al.

ADVANCED MATERIALS INTERFACES (2017)

Article Multidisciplinary Sciences

Manganese mono-boride, an inexpensive room temperature ferromagnetic hard material

Shuailing Ma et al.

SCIENTIFIC REPORTS (2017)

Article Chemistry, Physical

Cu2O/TiO2 heterostructures for CO2 reduction through a direct Z-scheme: Protecting Cu2O from photocorrosion

Matias E. Aguirre et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2017)

Article Nanoscience & Nanotechnology

Impact of Microstructure on MoS2 Oxidation and Friction

John F. Curry et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Article Chemistry, Multidisciplinary

Superlubricity between MoS2 Monolayers

He Li et al.

ADVANCED MATERIALS (2017)

Article Multidisciplinary Sciences

Carbon-based tribofilms from lubricating oils

Ali Erdemir et al.

NATURE (2016)

Article Materials Science, Multidisciplinary

Amorphous W-S-N thin films: The atomic structure behind ultra-low friction

Leyla Isaeva et al.

ACTA MATERIALIA (2015)

Article Nanoscience & Nanotechnology

Synthesis of Au-MoS2 Nanocomposites: Thermal and Friction-Induced Changes to the Structure

T. W. Scharf et al.

ACS APPLIED MATERIALS & INTERFACES (2013)

Article Chemistry, Multidisciplinary

Synthesis of MoS2 and MoSe2 Films with Vertically Aligned Layers

Desheng Kong et al.

NANO LETTERS (2013)

Article Engineering, Mechanical

Global energy consumption due to friction in passenger cars

Kenneth Holmberg et al.

TRIBOLOGY INTERNATIONAL (2012)

Article Nanoscience & Nanotechnology

The Role of Water in Modifying Friction within MoS2 Sliding Interfaces

Xueying Zhao et al.

ACS APPLIED MATERIALS & INTERFACES (2010)

Article Materials Science, Multidisciplinary

Friction and wear mechanisms in MoS2/Sb2O3/Au nanocomposite coatings

T. W. Scharf et al.

ACTA MATERIALIA (2010)

Article Materials Science, Coatings & Films

Tribological properties of Cr- and Ti-doped MoS2 composite coatings under different humidity atmosphere

Xing-zhao Ding et al.

SURFACE & COATINGS TECHNOLOGY (2010)

Article Materials Science, Coatings & Films

Tribological characteristics Of WS2/MoS2 solid lubricating multilayer films

S Watanabe et al.

SURFACE & COATINGS TECHNOLOGY (2004)

Article Materials Science, Coatings & Films

On the application of the work-of-indentation approach to depth-sensing indentation experiments in coated systems

JR Tuck et al.

SURFACE & COATINGS TECHNOLOGY (2001)