4.7 Article

Efficient degradation of Phenol by 1 T/2H-MoS2/CuFe2O4 activated peroxymonosulfate and mechanism research

Related references

Note: Only part of the references are listed.
Article Engineering, Environmental

Superior Fenton-like and photo-Fenton-like activity of MoS2@TiO2/N-doped carbon nanofibers with phase-regulated and vertically grown MoS2 nanosheets

Yue Li et al.

Summary: In this study, the researchers investigated the effects of phase and vertical structure of Molybdenum disulfide (MoS2) nanosheets on the activation of hydrogen peroxide (H2O2) in Fenton-like reactions. The results showed that the metallic 1 T phase of MoS2 favored the dark-Fenton-like reaction, while the biphase 1 T/2H MoS2 was beneficial for the photo-Fenton-like reaction. The vertical structure of MoS2 nanosheets was found to be more effective in promoting H2O2 activation compared to phase regulation. The study also proposed degradation pathways for tetracycline (TC) and demonstrated the stability and recyclability of the optimized MoS2-based catalysts. This work provides guidance for the design of highly efficient MoS2-based Fenton-like or photo-Fenton-like catalysts.

CHEMICAL ENGINEERING JOURNAL (2023)

Article Chemistry, Physical

Accelerated iron cycle inducing molecular oxygen activation for deep oxidation of aromatic VOCs in MoS2 co-catalytic Fe3+/PMS system

Xiaowen Xie et al.

Summary: MoS2 cocatalyst greatly enhances the deep oxidation of aromatic VOCs by promoting Fe3+/PMS reaction and activating O2 into radicals. The Fe3+/PMS/MoS2 system exhibits strong catalytic ability for various VOCs degradation at a wide pH range.

APPLIED CATALYSIS B-ENVIRONMENTAL (2022)

Article Chemistry, Physical

Micro-flower like Core-shell structured ZnCo@C@1T-2H-MoS2 composites for broadband electromagnetic wave absorption and photothermal performance

Rongrong Yu et al.

Summary: In this paper, a micro-flower like ZnCo@C@1T2H-MoS2 structure was prepared through MOF self-template method, which optimized impedance matching and improved the EMW absorption ability. The ZnCo@C@1T-2H-MoS2 showed a minimum reflection loss of -35.83 dB at a thickness of 5.0 mm, and an effective absorption bandwidth of 4.56 GHz at 2.0 mm thickness. The overall effective absorption bandwidth reached up to 13.44 GHz. Additionally, the material exhibited ultrafast photothermal performance, ensuring its normal functioning in cold conditions.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Article Chemistry, Physical

Synergistic effect of flower-like MnFe2O4/MoS2 on photo-Fenton oxidation remediation of tetracycline polluted water

Xiaoyu Wei et al.

Summary: A flower-like MnFe2O4-MoS2 (FMW) catalyst was prepared for photo-Fenton oxidation, exhibiting good catalytic stability and recoverability. The FMW possessed large open surface area and a p-n heterojunction, ensuring fast electron transfer and active site exposure for tetracycline degradation.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Article Engineering, Environmental

Fabrication and mechanism exploration of oxygen-incorporated 1T-MoS2 with high adsorption performance on methylene blue

Deqi Tang et al.

Summary: Different phases of MoS2, such as 1T-MoS2, 1T/2H-MoS2, and 2H-MoS2, were successfully prepared by controlling the temperature of the hydrothermal process. Experimental characterization confirmed the incorporation of oxygen in 1T-MoS2, which exhibited excellent adsorption capacity for methylene blue. Density functional theory calculations further revealed the differences in adsorption properties between 2H-MoS2 and 1T-MoS2, as well as the impact of oxygen incorporation.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Engineering, Chemical

Mechanistic investigation of rapid catalytic degradation of tetracycline using CoFe2O4@MoS2 by activation of peroxymonosulfate

Xiaoming Peng et al.

Summary: A series of Fenton-like catalysts based on the loading of CoFe2O4 nanoparticles on the surface of MoS2 were successfully prepared by a one-pot hydrothermal synthesis strategy. These catalysts exhibited superior catalytic ability for tetracycline (TC) degradation by activating peroxymonosulfate (PMS). The synergetic effect of the highly active Mo(IV) sites and unsaturated S on the surface of the catalyst greatly improved the degradation efficiency, resulting in the acceleration of Fe(III) to Fe(II) circulation and the adsorption and decomposition of PMS.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Article Engineering, Chemical

High 1T phase and sulfur vacancies in C-MoS2@Fe induced by ascorbic acid for synergistically enhanced contaminants degradation

Zenglong Wu et al.

Summary: Applying co-catalyst into Fenton-like advanced oxidation processes for wastewater remediation is a challenging task. In this study, a carbon intercalated molybdenum disulfide anchoring iron catalyst was successfully synthesized by introducing ascorbic acid additive. The catalyst showed remarkable performance in degrading multiple organic contaminants, working within a wide pH range, and avoiding the formation of iron containing sludge.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Article Chemistry, Physical

Flower-like FeMoO4@1T-MoS2 micro-sphere for effectively cleaning binary dyes via photo-Fenton oxidation

Xiaojun Guo et al.

Summary: In this study, flower-like FeMoO4@1T-MoS2 composites were prepared and used for photo-Fenton catalysis degradation of MB and RhB dyes. The highest degradation efficiency was achieved when the Mo/Fe molar ratio was 1:1. Kinetics models and DFT simulations revealed the adsorption and activation of H2O2 by the composite. The degradation pathways were determined by LC-MS and quenching experiments.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Article Engineering, Chemical

Enhanced quinoline degradation by persulfate-assisted photocatalytic process with WO3-CuFe2O4 Z-scheme system: Properties and mechanism

Bihan Sun et al.

Summary: In this study, a WO3-CuFe2O4 Z-scheme system was constructed, and the photocatalytic degradation of quinoline was enhanced by adding persulfate. The results showed that the degradation efficiency of quinoline increased from 24.3% to 100% with the addition of persulfate under the appropriate conditions. The WO3-CuFe2O4 catalyst exhibited excellent reusability, and the degradation mechanism of quinoline in the WO3-CuFe2O4/VIS/PS system involved denitrification, dehydrogenation, hydroxylation, and ring breaking processes.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Article Engineering, Environmental

Doping Sb into CuFe2O4 improved the catalytic performance in the electrochemically enhanced homogeneous peroxymonosulfate-heterogeneous catalytic system for the degradation of ciprofloxacin

Sha Yu et al.

Summary: In this study, an electrochemically enhanced homogeneous-heterogeneous catalytic system was constructed using CuFe2O4-based catalyst to activate PMS for the removal of ciprofloxacin. Sb and Sn were doped into CuFe2O4 nanosheets to improve its catalytic performance. The EC/Sb-CuFe2O4/PMS system showed the highest degradation efficiency, removing 90.3% of CIP under optimal conditions.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2022)

Article Chemistry, Physical

Heterogeneous Fenton-like degradation of tartrazine using CuFe2O4 nanoparticles synthesized by sol-gel combustion

Amal Soufi et al.

Summary: Copper ferrite nanoparticles were prepared and used for the degradation of tartrazine in aqueous solution. The optimization of process parameters resulted in maximum degradation efficiency.

APPLIED SURFACE SCIENCE ADVANCES (2022)

Article Materials Science, Multidisciplinary

Freestanding nanosheets of 1T-2H hybrid MoS2 as electrodes for efficient sodium storage

Haiyang Yu et al.

Summary: A hybrid design and material preparation of freestanding nanosheets of MoS2 were reported in this work, showing a significant improvement in electronic conductivity and high capacity for sodium storage, demonstrating their potential in high-performance battery applications.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Article Chemistry, Physical

The mechanistic difference of 1T-2H MoS2 homojunctions in persulfates activation: Structure-dependent oxidation pathways

Jia-Cheng E. Yang et al.

Summary: This study investigated the mechanistic difference of 1 T-2H MoS2 homojunctions in catalytic activation of peroxymonosulfate (PMS) for degrading butyl paraben (BPB), finding that PMS/1 T-2H MoS2 showed higher performance in BPB removal, with (OH)•-induced BPB removal being the top priority for both PMS/1 T-2H MoS2 and PDS/1 T-2H MoS2. The different activation pathways and reactive species resulted in varying BPB removal, by-product distributions, and toxicity.

APPLIED CATALYSIS B-ENVIRONMENTAL (2021)

Article Engineering, Environmental

Ultrafast activation of peroxymonosulfate by reduction of trace Fe3+ with Ti3C2 MXene under neutral and alkaline conditions: Reducibility and confinement effect

Haoran Song et al.

Summary: This study achieved ultrafast activation of peroxymonosulfate by reduction of trace Fe3+ at the μg L-1 level using eco-friendly Ti3C2 MXene under neutral and alkaline conditions. Complete removal of the model pollutant sulfamethoxazole was accomplished within minutes, with hydroxyl and sulfate radicals identified as the primary reactive species. The strong reducibility of Ti3C2 MXene played a key role in triggering the Fe(III)/Fe (II) cycle and accelerating PMS activation, leading to excellent performance in the Fenton-like process.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Physical

Activation of peroxydisulfate by V-Fe concentrate ore for enhanced degradation of carbamazepine: Surface ≡V(III) and ≡V(IV) as electron donors promoted the regeneration of ≡Fe(II)

Leiduo Lai et al.

Summary: By utilizing V-Fe concentrate ore to activate peroxydisulfate for carbamazepine degradation, this study revealed the essential role of low valent vanadium in the high activity of V-Fe-based catalysts. Through experiments and modeling, the degradation process and mechanism were inferred, demonstrating the catalyst's excellent recyclability and broad applicability.

APPLIED CATALYSIS B-ENVIRONMENTAL (2021)

Article Chemistry, Physical

Edge-oriented, high-percentage 1T′-phase MoS2 nanosheets stabilize Ti3C2 MXene for efficient electrocatalytic hydrogen evolution

Xitao Li et al.

Summary: This study successfully synthesized an efficient and stable MoS2-Ti3C2 MXene electrocatalyst using a one-step hydrothermal method, which has abundant active sites and high electrical conductivity, showing excellent electrocatalytic performance in acidic medium.

APPLIED CATALYSIS B-ENVIRONMENTAL (2021)

Article Chemistry, Physical

Oxygen vacancy on hollow sphere CuFe2O4 as an efficient Fenton-like catalysis for organic pollutant degradation over a wide pH range

Rong-Rong Ding et al.

Summary: A novel heterogeneous Fenton-like catalyst, HS-CuFe2O4-sigma, was designed in this study to efficiently remove the pollutant ciprofloxacin. The efficient catalytic performance of HS-CuFe2O4-sigma is attributed to the synergistic effect of oxygen vacancies and the nanoconfinement of the catalyst's special hollow structure.

APPLIED CATALYSIS B-ENVIRONMENTAL (2021)

Article Chemistry, Physical

1T and 2H mixed phase MoS2 nanobelts coupled with Ti3+ self-doped TiO2 nanosheets for enhanced photocatalytic degradation of RhB under visible light

Qian Zhang et al.

Summary: The novel 1T-2H MoS2/TiO2-x composite shows excellent photocatalytic degradation performance due to its 2D heterostructure, Ti3+ and oxygen vacancy defects, and the acceleration of charge transfer by metallic 1T phase MoS2. This composite provides abundant reaction active sites, extends the photoresponse to visible light region, and benefits effective charge separation and transport.

APPLIED SURFACE SCIENCE (2021)

Article Chemistry, Physical

Hierarchical ultrathin layered MoS2@NiFe2O4 nanohybrids as a bifunctional catalyst for highly efficient oxygen evolution and organic pollutant degradation

Marimuthu Karpuraranjith et al.

Summary: A highly efficient dual-functional catalyst for electrocatalytic oxygen evolution reaction and dye pollutant degradation was developed using a bandgap matching and interfacial coupling strategy. The catalyst showed low overpotential and high Tafel slope, demonstrating superior performance for both reactions.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Article Environmental Sciences

Selective oxidation of diclofenac sodium with different electronegative moieties via coexisting SO4•- and •OH

Lei Tian et al.

Summary: This study investigates the selective oxidation capacity of coexisting SO4 center dot(-) and center dot OH towards organic moieties with differing electronegativity, shedding light on the degradation pathways of an organic contaminant.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Article Engineering, Environmental

MoS2 based nanocomposites: An excellent material for energy and environmental applications

Md Ahmaruzzaman et al.

Summary: Molybdenum disulphide (MoS2) is widely studied as a heterogeneous catalyst for its outstanding properties, and its 2D form has gained attention for environmental and energy applications. As a structural analogue of graphene, MoS2 offers similar properties but at a lower cost and greater abundance, with potential for enhanced catalytic efficiency when coupled with graphene.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Article Engineering, Environmental

Activation of persulfate by a novel magnetic CuFe2O4/Bi2O3 composite for lomefloxacin degradation

Huixuan Zhang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Engineering, Environmental

Ethanol introduced synthesis of ultrastable 1T-MoS2 for removal of Cr(VI)

Zeyang Li et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Article Engineering, Environmental

Honeycomb spherical 1T-MoS2 as efficient counter electrodes for quantum dot sensitized solar cells

Zizun Tian et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Engineering, Environmental

Pivotal roles of MoS2 in boosting catalytic degradation of aqueous organic pollutants by Fe(II)/PMS

Bo Sheng et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Review Engineering, Environmental

Environmental Applications of 2D Molybdenum Disulfide (MoS2) Nanosheets

Zhongying Wang et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2017)

Article Chemistry, Physical

Phase engineering of a multiphasic 1T/2H MoS2 catalyst for highly efficient hydrogen evolution

Dezhi Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Article Engineering, Environmental

Polytype 1T/2H MoS2 heterostructures for efficient photoelectrocatalytic hydrogen evolution

Dezhi Wang et al.

CHEMICAL ENGINEERING JOURNAL (2017)

Review Engineering, Environmental

Application of peroxymonosulfate and its activation methods for degradation of environmental organic pollutants: Review

Farshid Ghanbari et al.

CHEMICAL ENGINEERING JOURNAL (2017)

Article Chemistry, Multidisciplinary

Insights into N-doping in single-walled carbon nanotubes for enhanced activation of superoxides: a mechanistic study

Xiaoguang Duan et al.

CHEMICAL COMMUNICATIONS (2015)

Article Engineering, Environmental

Protocatechuic Acid Promoted Alachlor Degradation in Fe(III)/H2O2 Fenton System

Yaxin Qin et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2015)

Article Engineering, Environmental

Magnetic core-shell CuFe2O4@C3N4 hybrids for visible light photocatalysis of Orange II

Yunjin Yao et al.

JOURNAL OF HAZARDOUS MATERIALS (2015)