☆ 4.6 Article

High performance non-fullerene organic photovoltaics under implant light illumination region

APPLIED PHYSICS LETTERS (2023)

Related references

Note: Only part of the references are listed.

Review Chemistry, Physical

Recent progress in organic solar cells based on non-fullerene acceptors: materials to devices

Dou Luo et al.

Summary: Non-fullerene acceptors (NFAs) have recently gained prominence in organic solar cells (OSCs) due to their significantly higher power conversion efficiency compared to fullerene acceptors. NFAs have advantages such as facile synthesis methods and tunability of morphology and electronic properties. They can also modify the optical bandgap to broaden the absorption range.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Add to Collection

Article Chemistry, Physical

Tandem Organic Solar Cell with 20.2% Efficiency

Zhong Zheng et al.

Summary: A advanced interconnecting layer for tandem organic solar cell is developed in this study. By controlling the O-2 flux during evaporation, efficient electron extraction and low Schottky barrier are obtained, enabling effective charge recombination between two subcells. The tandem cell with the interconnecting layer shows a high efficiency of 20.27%.

JOULE (2022)

Add to Collection

Article Energy & Fuels

Proton Radiation Hardness of Organic Photovoltaics: An In-Depth Study

Harrison Ka Hin Lee et al.

Summary: Recent developments of solution-processed bulk-heterojunction organic photovoltaic (OPV) cells have demonstrated high power conversion efficiencies (PCEs) up to 18% for single-junction devices. Despite a drop in performance, the retaining percentage of the performance is higher than the current market-dominating space PV technology, showing a high potential of OPV cells for space applications.

SOLAR RRL (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Facile synthesis of annulated benzothiadiazole derivatives and their application as medium band gap acceptors in organic photovoltaic devices

Xiantao Hu et al.

Summary: Two new non-fullerene acceptors were prepared by nucleophilic substitution reactions of a fluorinated precursor, and showed good performance in solar cell blends. Devices based on the fluorinated acceptor exhibited efficient power conversion efficiencies, especially under low light conditions.

JOURNAL OF MATERIALS CHEMISTRY C (2022)

Add to Collection

Article Chemistry, Physical

Agrivoltaics-The Perfect Fit for the Future of Organic Photovoltaics

Rico Meitzner et al.

Summary: This essay proposes a possible pathway for the advancement of organic photovoltaics toward broader commercial success, specifically targeting photovoltaic greenhouses and polytunnels. By making assumptions and predictions, a theoretical power conversion efficiency of approximately 17% is expected to be achieved, supported by the compatibility of certain organic compounds with the photosynthetic action spectrum of chloroplasts. It is hoped that this essay will stimulate further materials development in the field.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Powering Implantable and Ingestible Electronics

So-Yoon Yang et al.

Summary: The article reviews the state-of-the-art of powering technologies for implantable and ingestible biomedical electronics, highlighting the importance of developing safe, compact, and high volumetric energy density power sources for long-term in-body biomedical electronics and personalized healthcare. It also discusses novel batteries, energy harvesting devices, and energy transfer methods suitable for implantable and ingestible electronics.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Review Chemistry, Physical

Flexible organic solar cells for biomedical devices

Bin Kan et al.

Summary: Organic solar cells (OSCs) have made significant progress in efficiency and cost through the evolution of organic photovoltaic materials and device engineering. Their emerging and potential usages in critical applications such as biomedical fields are on the rise.

NANO RESEARCH (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Materials Perspectives for Self-Powered Cardiac Implantable Electronic Devices toward Clinical Translation

Jun Li et al.

Summary: Implantable electronic devices play a vital life-saving role in modern society, but traditional battery designs for these devices pose challenges. Applying implantable nanogenerators technology can help address the battery challenge and enable self-sustaining operation for these devices.

ACCOUNTS OF MATERIALS RESEARCH (2021)

Add to Collection

Article Chemistry, Physical

Exploiting Ternary Blends for Improved Photostability in High-Efficiency Organic Solar Cells

Nicola Gasparini et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Review Engineering, Biomedical

Self-Powered Implantable Medical Devices: Photovoltaic Energy Harvesting Review

Jinwei Zhao et al.

ADVANCED HEALTHCARE MATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Photovoltaic organic interface for neuronal stimulation in the near-infrared

Marta Jole Ildelfonsa Airaghi Leccardi et al.

COMMUNICATIONS MATERIALS (2020)

Add to Collection

Review Chemistry, Physical

Indoor application of emerging photovoltaics-progress, challenges and perspectives

Xueyan Hou et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Physical

Cost estimates of production scale semitransparent organic photovoltaic modules for building integrated photovoltaics

Byungjun Lee et al.

SUSTAINABLE ENERGY & FUELS (2020)

Add to Collection

Article Engineering, Biomedical

Biomedical electronics powered by solar cells

Lodrick Makokha Wangatia et al.

CURRENT OPINION IN BIOMEDICAL ENGINEERING (2020)

Add to Collection

Article Multidisciplinary Sciences

Effectiveness of Solvent Vapor Annealing over Thermal Annealing on the Photovoltaic Performance of Non-Fullerene Acceptor Based BHJ Solar Cells

Ram Datt et al.

SCIENTIFIC REPORTS (2019)

Add to Collection

Review Chemistry, Physical

From fullerene acceptors to non-fullerene acceptors: prospects and challenges in the stability of organic solar cells

Emily M. Speller et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Energy & Fuels

High-Voltage Backside-Illuminated CMOS Photovoltaic Module for Powering Implantable Temperature Sensors

Yung-Jr Hung et al.

IEEE JOURNAL OF PHOTOVOLTAICS (2018)

Add to Collection

Article Chemistry, Physical

Controlling Blend Morphology for Ultrahigh Current Density in Nonfullerene Acceptor-Based Organic Solar Cells

Xin Song et al.

ACS ENERGY LETTERS (2018)

Add to Collection

Article Polymer Science

Comparative Study of Thermal Stability, Morphology, and Performance of All-Polymer, Fullerene-Polymer, and Ternary Blend Solar Cells Based on the Same Polymer Donor

Taesu Kim et al.

MACROMOLECULES (2017)

Add to Collection

Article Biophysics

Generation of electrical power under human skin by subdermal solar cell arrays for implantable bioelectronic devices

Kwangsun Song et al.

BIOSENSORS & BIOELECTRONICS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Organic Photovoltaics and Bioelectrodes Providing Electrical Stimulation for PC12 Cell Differentiation and Neurite Outgrowth

Yu-Sheng Hsiao et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection

Article Physics, Applied

Is organic photovoltaics promising for indoor applications?

Harrison K. H. Lee et al.

APPLIED PHYSICS LETTERS (2016)

Add to Collection

Article Engineering, Biomedical

Subdermal Flexible Solar Cell Arrays for Powering Medical Electronic Implants

Kwangsun Song et al.

ADVANCED HEALTHCARE MATERIALS (2016)

Add to Collection

Article Engineering, Biomedical

Ultraminiaturized photovoltaic and radio frequency powered optoelectronic systems for wireless optogenetics

Sung Il Park et al.

JOURNAL OF NEURAL ENGINEERING (2015)

Add to Collection

Article Engineering, Biomedical

Flexible Piezoelectric Thin-Film Energy Harvesters and Nanosensors for Biomedical Applications

Geon-Tae Hwang et al.

ADVANCED HEALTHCARE MATERIALS (2015)

Add to Collection

Article Cardiac & Cardiovascular Systems

Successful pacing using a batteryless sunlight-powered pacemaker

Andreas Haeberlin et al.

EUROPACE (2014)

Add to Collection

Review Chemistry, Multidisciplinary

Non-fullerene acceptors for organic photovoltaics: an emerging horizon

Yuze Lin et al.

MATERIALS HORIZONS (2014)

Add to Collection

Correction Engineering, Biomedical

Optical properties of biological tissues: a review (vol 58, pg R37, 2013)

Steven L. Jacques

PHYSICS IN MEDICINE AND BIOLOGY (2013)

Add to Collection

Review Electrochemistry

Batteries used to power implantable biomedical devices

David C. Bock et al.

ELECTROCHIMICA ACTA (2012)

Add to Collection

Article Chemistry, Physical

Construction of 980 nm laser-driven dye-sensitized photovoltaic cell with excellent performance for powering nanobiodevices implanted under the skin

Lisha Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY (2012)

Add to Collection

Article Chemistry, Multidisciplinary

Near-infrared laser-driven polymer photovoltaic devices and their biomedical applications

Jyh-Lih Wu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2011)

Add to Collection

Article Chemistry, Multidisciplinary

980-nm Laser-Driven Photovoltaic Cells Based on Rare-Earth Up-Converting Phosphors for Biomedical Applications

Zhigang Chen et al.

ADVANCED FUNCTIONAL MATERIALS (2009)

Add to Collection

Article Dermatology

Light-Emitting Diodes (LEDs) in Dermatology

Daniel Barolet

SEMINARS IN CUTANEOUS MEDICINE AND SURGERY (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Inorganic photovoltaic cells

Robert W. Miles et al.

MATERIALS TODAY (2007)

Add to Collection

Article Physics, Applied

Efficient inverted polymer solar cells

G. Li et al.

APPLIED PHYSICS LETTERS (2006)

Add to Collection

© Peeref 2019-2024. All rights reserved.