☆ 4.7 Article

Analytical method for mechanical analysis of multiple shallow tunnels with concrete linings

APPLIED MATHEMATICAL MODELLING (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Multidisciplinary

An efficient patch-to-patch method for coupling independent finite element subdomains with intersecting interfaces

Huangcheng Fang et al.

Summary: The proposed method presents a mortar-type approach to couple independent finite element subdomains efficiently. By dividing the constraint matrix into pure and cross constraint systems, it achieves effective submatrix condensation and avoids over-constrained behavior. Comparative studies of theoretical and numerical solutions demonstrate the method's optimal convergence rate and high computational efficiency.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2022)

Add to Collection

Article Engineering, Multidisciplinary

Scalable three-dimensional hybrid continuum-discrete multiscale modeling of granular media

Weijian Liang et al.

Summary: This study introduces a scalable three-dimensional multiscale framework for continuum-discrete modeling of granular materials, combining a continuum-based material point method (MPM) and a discrete element method (DEM). A parallel scheme based on MPI model is developed to address computational cost, achieving significant speedup in large-scale simulations. The framework is validated and applied to simulate the intrusion of a solid object, showcasing its numerical performance and predictive capability.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2022)

Add to Collection

Article Engineering, Civil

Centrifuge modelling of tunnelling below existing twin tunnels with different types of support

Qian Fang et al.

Summary: This study investigates the effects of new tunnelling on existing tunnels using a centrifuge model test. The results show that the soil pressures and bending movements of the existing tunnels behave differently due to the new tunnel excavation. The joint deformation of the existing tunnels can be classified into translation, rotation, or a combination of both.

UNDERGROUND SPACE (2022)

Add to Collection

Article Engineering, Civil

Centrifuge modelling of tunnelling below existing twin tunnels with different types of support

Qian Fang et al.

Summary: The study used centrifuge model tests to investigate the effects of new tunneling on existing tunnels, including surface settlements, soil pressures, bending movements, and joint behaviors. The results showed that the volume loss from new tunnel excavation was smaller than the soil volume moving into the tunnel, and the maximum settlement of the segmental lining model was larger than that of the composite lining model. Additionally, the soil pressures on different positions of the existing tunnel behaved differently, and the bending movements of the existing tunnels decreased due to new tunnel excavation.

UNDERGROUND SPACE (2022)

Add to Collection

Article Engineering, Multidisciplinary

A virtual interface-coupled extended finite element method for three-dimensional contact problems

Huangcheng Fang et al.

Summary: In this article, a virtual interface-coupled technique is proposed for modeling three-dimensional contact behaviors of nonconforming interfaces. The method constructs an approximation of the displacement field by introducing enriched nodes and imposes the connection between virtual interface and discontinuous interface using the dual Lagrange multiplier method. The proposed method provides an effective, robust, and fast way to simulate arbitrary discontinuous interfaces in XFEM.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

A generalized complex variable method for multiple tunnels at great depth considering the interaction between linings and surrounding rock

Huangcheng Fang et al.

Summary: This paper presents a non-iterative analytical method for calculating the mechanical field of multiple lined tunnels with high efficiency and precision. By expanding the analytic function at each tunnel boundary, accurate stress and displacement fields in the whole multiply-connected domain can be expressed, independent conformal mappings make it convenient to deal with multiple arbitrary-shaped boundaries.

COMPUTERS AND GEOTECHNICS (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Study on soil gap formation beneath existing underground structures due to new excavation below

Xiang Liu et al.

Summary: A soil structure separation model based on subgrade reaction analysis is proposed in this paper to study the impact of new excavations on existing underground structures. Parametric analyses have been conducted to investigate the main influence factors on soil gap formation and a soil gap coefficient C-g is provided for preliminary assessment. The research indicates that a soil gap is potentially formed beneath existing underground structures when the soil gap coefficient C-g is less than 300.

COMPUTERS AND GEOTECHNICS (2021)

Add to Collection

Article Engineering, Geological

A semi-implicit material point method based on fractional-step method for saturated soil

Shyamini Kularathna et al.

Summary: This paper introduces a new formulation of material point method (MPM) to model coupled soil deformation and pore fluid flow problems within the theory of porous media. The algorithm includes an implicit treatment of pore-water pressure, leading to reduced pressure oscillations and increased time step size, independent of fluid incremental strain level and soil permeability. The proposed method is validated through numerical tests and practical engineering problems involving large deformations.

INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS (2021)

Add to Collection

Article Engineering, Geological

Analytical algorithm for longitudinal deformation profile of a deep tunnel

Qian Fang et al.

Summary: An analytical model is proposed to investigate the longitudinal deformation profile (LDP) of a deep tunnel in non-hydrostatic condition. The model considers the effects of axial and horizontal lateral pressure coefficients, revealing that the horizontal coefficient mainly affects LDP behind the tunnel face, while the axial coefficient dominates LDP ahead of the face. The proposed solution is verified by numerical simulation and compared with LDP functions recommended by other researchers.

JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2021)

Add to Collection

Article Engineering, Multidisciplinary

Stress continuity in DEM-FEM multiscale coupling based on the generalized bridging domain method

Fubin Tu et al.

APPLIED MATHEMATICAL MODELLING (2020)

Add to Collection

Article Computer Science, Interdisciplinary Applications

An analytical mechanism of limit support pressure on cutting face for deep tunnels in the sand

Pengfei Li et al.

COMPUTERS AND GEOTECHNICS (2020)

Add to Collection

Article Engineering, Multidisciplinary

A contact algorithm for cohesive cracks in the extended finite element method

Huangcheng Fang et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2020)

Add to Collection

Article Engineering, Multidisciplinary

Finite element analysis of flood discharge atomization based on water-air two-phase flow

Gang Liu et al.

APPLIED MATHEMATICAL MODELLING (2020)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Analytical study on interaction between existing and new tunnels parallel excavated in semi-infinite viscoelastic ground

H. N. Wang et al.

COMPUTERS AND GEOTECHNICS (2020)

Add to Collection

Article Engineering, Geological

Face Stability Analysis for a Shield Tunnel in Anisotropic Sands

Wei Li et al.

INTERNATIONAL JOURNAL OF GEOMECHANICS (2020)

Add to Collection

Article Engineering, Geological

Complex Variable Solution for Twin Tunneling-Induced Ground Movements Considering Nonuniform Convergence Pattern

Zhiguo Zhang et al.

INTERNATIONAL JOURNAL OF GEOMECHANICS (2020)

Add to Collection

Article Engineering, Geological

Verifying discontinuous deformation analysis simulations of the jointed rock mass behavior of shallow twin mountain tunnels

Trong-Nhan Do et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2020)

Add to Collection

Article Engineering, Geological

A coupled CFD-DEM investigation of suffusion of gap graded soil: Coupling effect of confining pressure and fines content

Yajing Liu et al.

INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS (2020)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Face stability analysis of a shallow tunnel in the saturated and multilayered soils in short-term condition

Pengfei Li et al.

COMPUTERS AND GEOTECHNICS (2019)

Add to Collection

Article Engineering, Geological

Multiscale modeling of large deformation in geomechanics

Weijian Liang et al.

INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS (2019)

Add to Collection

Article Construction & Building Technology

Three-dimensional seismic response of a cylindrical tunnel with voids behind the lining

Naotoshi Yasuda et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2019)

Add to Collection

Article Engineering, Multidisciplinary

Elastic analytical solution of shallow tunnel owing to twin tunnelling based on a unified displacement function

Fanchao Kong et al.

APPLIED MATHEMATICAL MODELLING (2019)

Add to Collection

Article Engineering, Geological

An Analytical Solution for an Arbitrary Cavity in an Elastic Half-Plane

Gui-sen Zeng et al.

ROCK MECHANICS AND ROCK ENGINEERING (2019)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Behaviour of existing tunnel due to new tunnel construction below

Xiang Liu et al.

COMPUTERS AND GEOTECHNICS (2019)

Add to Collection

Article Engineering, Multidisciplinary

A semi-analytical solution for shallow tunnels with radius-iterative-approach in semi-infinite space

Zou Jin-feng et al.

APPLIED MATHEMATICAL MODELLING (2019)

Add to Collection

Article Engineering, Multidisciplinary

Analytic solutions for twin tunneling at great depth considering liner installation and mutual interaction between geomaterial and liners

Fu-quan Chen et al.

APPLIED MATHEMATICAL MODELLING (2019)

Add to Collection

Article Engineering, Civil

Complex Analysis of Ground Deformation and Stress for a Shallow Circular Tunnel with a Cavern in the Strata considering the Gravity Condition

Gongbiao Yang et al.

KSCE JOURNAL OF CIVIL ENGINEERING (2019)

Add to Collection

Article Engineering, Geological

Numerical investigation of the effects of tunnelling on existing tunnels

V. Avgerinos et al.

GEOTECHNIQUE (2017)

Add to Collection

Article Engineering, Geological

Analytical prediction for ground movements and liner internal forces induced by shallow tunnels considering non-uniform convergence pattern and ground-liner interaction mechanism

Zhiguo Zhang et al.

SOILS AND FOUNDATIONS (2017)

Add to Collection

Article Construction & Building Technology

Elastic solutions for circular tunnel with void behind lining

Naotoshi Yasuda et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2017)

Add to Collection

Article Construction & Building Technology

Three-dimensional finite-element analysis on ground responses during twin-tunnel construction using the URUP method

Z. X. Zhang et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2016)

Add to Collection

Article Engineering, Geological

The stress state around lined non-circular hydraulic tunnels below the water table using complex variable method

Ali Reza Kargar et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2015)

Add to Collection

Article Engineering, Geological

Analytical solutions for the stress of a lined non-circular tunnel under full-slip contact conditions

Ai-zhong Lu et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2015)

Add to Collection

Article Construction & Building Technology

Face stability analysis of shallow circular tunnels in cohesive-frictional soils

Chengping Zhang et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2015)

Add to Collection

Article Engineering, Geological

An analytical solution for deforming twin-parallel tunnels in an elastic half plane

Jinyang Fu et al.

INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS (2015)

Add to Collection

Article Engineering, Geological

Back analysis technique for mountain tunneling based on the complex variable solution

Zhenchang Guan et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2013)

Add to Collection

Article Engineering, Environmental

Analysis of interaction between tunnels in soft ground by 3D numerical modeling

Hamid Chakeri et al.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2011)

Add to Collection

Article Construction & Building Technology

Drained and undrained response of deep tunnels subjected to far-field shear loading

Antonio Bobet

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2010)

Add to Collection

Article Construction & Building Technology

Analytical solution for deep rectangular structures subjected to far-field shear stresses

H. Huo et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2006)

Add to Collection

Article Engineering, Geological

Three-dimensional numerical investigations of new Austrian tunnelling method (NATM) twin tunnel interactions

CWW Ng et al.

CANADIAN GEOTECHNICAL JOURNAL (2004)

Add to Collection

Article Engineering, Geological

A complex variable solution for a deforming buoyant tunnel in a heavy elastic half-plane

OE Strack et al.

INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS (2002)

Add to Collection

Article Construction & Building Technology

Interaction of circular holes in an infinite elastic medium

CB Kooi et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.