☆ 4.8 Article

Multifunctional Hybrid Interfacial Layers for High-Performance Inverted Perovskite Solar Cells

ADVANCED MATERIALS (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Thermally Evaporated ZnSe for Efficient and Stable Regular/Inverted Perovskite Solar Cells by Enhanced Electron Extraction

Xin Li et al.

Summary: This study demonstrates the use of ZnSe as an inorganic ETL in planar perovskite solar cells, achieving improved efficiency and stability. The findings also suggest the applicability of ZnSe in both regular and inverted PSCs, with outstanding performance.

ENERGY & ENVIRONMENTAL MATERIALS (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Finite perovskite hierarchical structures via ligand confinement leading to efficient inverted perovskite solar cells

Yanchun Huang et al.

Summary: Finite 2D/3D hierarchical perovskite structures are constructed using interfacial ligand confinement, resulting in efficient and stable inverted perovskite solar cells (PSCs) and modules. The introduction of a diamine masking reagent regulates cation exchange and forms a finite and dense 2D layer, improving top-contact passivation and electron extraction. The inverted PSCs and modules with finite 2D/3D perovskite layers achieve remarkable power conversion efficiencies of 24.7% and 21.6% (certified PCE of 21.2%), respectively, making them one of the best-performing inverted mini-modules reported so far. Encapsulated PSCs retain over 90% of their original PCE after 1000 hours of illumination. Overall, this work presents an effective approach for further advancing perovskite photovoltaics.

ENERGY & ENVIRONMENTAL SCIENCE (2023)

Add to Collection

Article Nanoscience & Nanotechnology

Self-Assembled Donor-Acceptor Dyad Molecules Stabilize the Heterojunction of Inverted Perovskite Solar Cells and Modules

Haoran Liu et al.

Summary: This study presents an effective strategy to suppress the interfacial reaction between nickel oxide and perovskite, leading to improved performance and operational lifetimes of perovskite solar cells. The strategy also proves successful in the fabrication of perovskite modules, achieving high efficiency and good photostability.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Light Intensity Analysis of Photovoltaic Parameters for Perovskite Solar Cells

Damian Glowienka et al.

Summary: A method of light intensity analysis of JV parameters has been developed in this study to understand the mechanisms that appear in perovskite solar cells and limit device performance. The method is aimed at helping to explain parasitic losses from interface or bulk recombination, series resistance, or shunt resistance. The effectiveness of the proposed method has been demonstrated through a series of case studies.

ADVANCED MATERIALS (2022)

Add to Collection

Article Multidisciplinary Sciences

All-perovskite tandem solar cells with improved grain surface passivation

Renxing Lin et al.

Summary: Researchers have developed ammonium-cation-passivated Pb-Sn perovskites with long diffusion lengths, enabling high-efficiency all-perovskite tandem solar cells. By enhancing the adsorption of the passivator using a stronger surface-passivator interaction, the carrier diffusion length within Pb-Sn perovskites is doubled, resulting in an efficiency of over 22%. The certified efficiency of 26.4% achieved in the all-perovskite tandem solar cells exceeds that of the best-performing single-junction perovskite solar cells.

NATURE (2022)

Add to Collection

Article Energy & Fuels

Monolithic perovskite/organic tandem solar cells with 23.6% efficiency enabled by reduced voltage losses and optimized interconnecting layer

Wei Chen et al.

Summary: Perovskite/organic tandem solar cells have a promising future in thin-film photovoltaics due to the large chemical composition and tunability of their bandgap. However, their efficiency is currently limited by the open-circuit voltage loss and non-ideal interconnecting layers. In this study, the passivation of nickel oxide hole-transporting layers and the development of an optimized interconnecting layer structure led to a significant increase in efficiency, reaching a maximum of 23.60% (22.95% certified) in perovskite/organic tandem solar cells.

NATURE ENERGY (2022)

Add to Collection

Article Engineering, Environmental

Passivation of iodine vacancies of perovskite films by reducing iodine to triiodide anions for high-performance photovoltaics

Yifang Qi et al.

Summary: This study reports a method to passivate the defects in inverted perovskite solar cells (PSCs) using tetrabutylammonium chloride (TABCl), which also modifies iodine vacancies and enhances device performance and stability.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Multidisciplinary Sciences

Perovskite-organic tandem solar cells with indium oxide interconnect

K. O. Brinkmann et al.

Summary: Multijunction solar cells can surpass the efficiency limits of single-junction devices. Metal halide perovskite solar cells, in combination with silicon and copper indium gallium selenide (CIGS) or as all-perovskite tandems, have shown promising results. Narrow-gap non-fullerene acceptors have also significantly improved the efficiencies of organic solar cells. In this study, perovskite-organic tandem cells with high efficiency and voltage are demonstrated, utilizing optimized charge extraction layers and an ultrathin metal-like indium oxide layer for interconnection. This milestone work outperforms the best perovskite single junctions and is comparable to perovskite-CIGS and all-perovskite multijunctions.

NATURE (2022)

Add to Collection

Article Chemistry, Physical

Elimination of Interfacial Lattice Mismatch and Detrimental Reaction by Self-Assembled Layer Dual-Passivation for Efficient and Stable Inverted Perovskite Solar Cells

Jiaqi Zhang et al.

Summary: In this study, the issues of interfacial lattice mismatch and adverse reaction in nickel oxide-based inverted perovskite solar cells are addressed by using a self-assembled small molecule CBSA, achieving high conversion efficiency and excellent stability.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Wide-Bandgap Organic-Inorganic Lead Halide Perovskite Solar Cells

Yao Tong et al.

Summary: This review summarizes the progress of wide-bandgap mixed halide perovskite solar cells and discusses their diverse applications in different fields and the challenges they face.

ADVANCED SCIENCE (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Organic Hole-Transport Layers for Efficient, Stable, and Scalable Inverted Perovskite Solar Cells

Yiguo Yao et al.

Summary: This review systematically summarizes recent progress in using organic hole-transporting layers (HTLs) in inverted p-i-n perovskite solar cells (PSCs), including conductive polymers, small molecules, and self-assembled monolayers. The molecular structure, hole-transport properties, energy levels, and relevant device properties and performances of organic HTLs are analyzed. Design principles and future outlook for highly efficient organic HTLs in inverted PSCs are proposed, aiming to inspire further innovative development of novel organic HTLs for more efficient, stable, and scalable inverted PSCs.

ADVANCED MATERIALS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Recent progress in perovskite solar cells: from device to commercialization

Xinhui Luo et al.

Summary: This review summarizes the rapid development and commercialization of perovskite solar cells (PSCs), including the recent progress in device structures, perovskite-based tandem cells, large-area modules, stability, applications, and industrialization. The challenges and perspectives for the commercialization of PSCs in the near future are also discussed.

SCIENCE CHINA-CHEMISTRY (2022)

Add to Collection

Article Optics

Defect engineering in wide-bandgap perovskites for efficient perovskite-silicon tandem solar cells

Guang Yang et al.

Summary: By employing tribromide ions to reduce charge recombination, efficient wide-bandgap mixed-halide perovskite-silicon tandem solar cells with an efficiency of up to 28.6% are reported, while also enhancing device stability.

NATURE PHOTONICS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Fully Textured, Production-Line Compatible Monolithic Perovskite/Silicon Tandem Solar Cells Approaching 29% Efficiency

Lin Mao et al.

Summary: This study develops a molecular-level nanotechnology to achieve high-performance perovskite/silicon tandem solar cells on fully textured wafer. By using a designed ultrathin hybrid hole transport layer, the cells obtain a certified efficiency of 28.84% on a 1.2 cm（2）masked area, which is the highest performance to date.

ADVANCED MATERIALS (2022)

Add to Collection

Review Engineering, Environmental

Thermally-stable and highly-efficient bi-layered NiOx-based inverted planar perovskite solar cells by employing a p-type organic semiconductor

Lin Li et al.

Summary: In this study, a p-type semiconductor TPA-BA was used to modify the NiOx/perovskite interface and form an intermediate hole transport layer (HTL) to improve the efficiency and stability of perovskite solar cells (PSCs). The results showed that PSCs with TPA-BA-modified HTL exhibited better device stability under light and thermal aging conditions, with a higher power conversion efficiency.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Review Chemistry, Applied

Nickel oxide for inverted structure perovskite solar cells

Fei Ma et al.

Summary: Inverted perovskite solar cells (PSCs) have attracted great attention due to their potential for improving stability. The use of nickel oxide (NiOx) as a hole transporting layer has shown promising results in achieving efficient and stable device performance, with efficiencies over 20%. Further research is ongoing to address current challenges and improve the development of efficient and stable NiOx based PSCs.

JOURNAL OF ENERGY CHEMISTRY (2021)

Add to Collection

Review Chemistry, Physical

Upscaling Solution-Processed Perovskite Photovoltaics

Fu Yang et al.

Summary: This review summarized the progress and challenges of scalable technologies for solution-based coating and printing of perovskite PVs, including high-quality preparation, selection and deposition of charge extraction layers and electrodes, as well as proposed strategies and opportunities to promote the development of stable and efficient large-area perovskite PVs towards commercialization.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

High-Efficiency and Durable Inverted Perovskite Solar Cells with Thermally-Induced Phase-Change Electron Extraction Layer

Xin Li et al.

Summary: By utilizing the unique metal-to-insulator transition characteristics of vanadium dioxide, this study introduces a new approach to improve the device performance of perovskite solar cells, achieving a power conversion efficiency of up to 22.11% in optimized conditions. Additionally, the VO2-based PSCs exhibit enhanced efficiency over 23% at high temperatures and superior thermal stability, showcasing the potential of thermally-induced phase-transition materials for efficient and durable perovskite photovoltaics.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Universal Bottom Contact Modification with Diverse 2D Spacers for High-Performance Inverted Perovskite Solar Cells

Jun Li et al.

Summary: This study investigates the effect of different 2D spacers on the bottom interface of inverted p-i-n PVSCs, revealing a significant improvement in efficiency and stability after optimization, attributed to the formation of 2D/3D heterojunction and related mechanisms. Additionally, the unencapsulated devices demonstrate excellent stability with 90% retention of initial efficiency after storage under ambient conditions.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Passivation of the Buried Interface via Preferential Crystallization of 2D Perovskite on Metal Oxide Transport Layers

Bin Chen et al.

Summary: By utilizing 2D perovskite post-treatments and passivation layers with organic cations, significant enhancements in performance of perovskite solar cells are observed, including increased open-circuit voltage and reduced surface recombination velocity.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Mitigating the Lead Leakage of High-Performance Perovskite Solar Cells via In Situ Polymerized Networks

Benfang Niu et al.

Summary: By implanting in situ polymerized networks into perovskites, the leakage of lead ions has been successfully mitigated, improving the performance of PSCs.

ACS ENERGY LETTERS (2021)

Add to Collection

Article Chemistry, Physical

High Electron Affinity Enables Fast Hole Extraction for Efficient Flexible Inverted Perovskite Solar Cells

Pengbin Ru et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Multidisciplinary Sciences

Resolving spatial and energetic distributions of trap states in metal halide perovskite solar cells

Zhenyi Ni et al.

SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

Modulation of Defects and Interfaces through Alkylammonium Interlayer for Efficient Inverted Perovskite Solar Cells

Shengfan Wu et al.

JOULE (2020)

Add to Collection

Article Chemistry, Physical

Overcoming Redox Reactions at Perovskite-Nickel Oxide Interfaces to Boost Voltages in Perovskite Solar Cells

Caleb C. Boyd et al.

JOULE (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Polymer Modification on the NiOx Hole Transport Layer Boosts Open-Circuit Voltage to 1.19 V for Perovskite Solar Cells

Xiaomei Lian et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Molecular Interaction Regulates the Performance and Longevity of Defect Passivation for Metal Halide Perovskite Solar Cells

Yepin Zhao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

Add to Collection

Article Chemistry, Physical

Stability and Dark Hysteresis Correlate in NiO-Based Perovskite Solar Cells

Diego Di Girolamo et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Molecule-Doped Nickel Oxide: Verified Charge Transfer and Planar Inverted Mixed Cation Perovskite Solar Cell

Wei Chen et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Modulate Molecular Interaction between Hole Extraction Polymers and Lead Ions toward Hysteresis-Free and Efficient Perovskite Solar Cells

Zhongqiang Zhang et al.

ADVANCED MATERIALS INTERFACES (2018)

Add to Collection

Article Chemistry, Physical

Dual Interfacial Modifications Enable High Performance Semitransparent Perovskite Solar Cells with Large Open Circuit Voltage and Fill Factor

Qifan Xue et al.

ADVANCED ENERGY MATERIALS (2017)

Add to Collection

Article Chemistry, Physical

Molecular Engineered Hole-Extraction Materials to Enable Dopant-Free, Efficient p-i-n Perovskite Solar Cells

Huanle Chen et al.

ADVANCED ENERGY MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Effects of Self-Assembled Monolayer Modification of Nickel Oxide Nanoparticles Layer on the Performance and Application of Inverted Perovskite Solar Cells

Qin Wang et al.

CHEMSUSCHEM (2017)

Add to Collection

Article Energy & Fuels

Self-formed grain boundary healing layer for highly efficient CH3NH3PbI3 perovskite solar cells

Dae-Yong Son et al.

NATURE ENERGY (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Covalent Surface Modification of Oxide Surfaces

Sidharam P. Pujari et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2014)

Add to Collection

Article Chemistry, Physical

Morphology and Carrier Extraction Study of Organic-Inorganic Metal Halide Perovskite by One- and Two-Photon Fluorescence Microscopy

Xiaoming Wen et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2014)

Add to Collection

Article Physics, Multidisciplinary

Trap-Assisted Recombination in Disordered Organic Semiconductors

M. Kuik et al.

PHYSICAL REVIEW LETTERS (2011)

Add to Collection

© Peeref 2019-2024. All rights reserved.