Related references
Note: Only part of the references are listed.
Article
Chemistry, Physical
Dianwei Zhang et al.
Summary: By using a low-tortuosity carbon matrix decorated with single-atom Co catalysts, a spatial control strategy has been proposed to address the challenges faced by potassium-metal batteries. This composite electrode shows dendrite-free potassium plating/striping behavior and exhibits excellent cycling stability and rate performance.
ADVANCED ENERGY MATERIALS
(2023)
Article
Engineering, Environmental
Yusheng Luo et al.
Summary: By designing a nano-silver anti-permeation film, the issue of strong adhesion and permeability in non-Newtonian fluid state Na-K (NaK) electrodes during the charging and discharging process is solved, resulting in improved performance and cycling stability of the batteries.
CHEMICAL ENGINEERING JOURNAL
(2023)
Article
Chemistry, Multidisciplinary
Ling Fan et al.
Summary: This study demonstrates a low-concentration, non-flammable, and weakly solvating electrolyte that enhances the safety and cyclability of potassium ion batteries.
ENERGY & ENVIRONMENTAL SCIENCE
(2023)
Article
Multidisciplinary Sciences
Hongbo Ding et al.
Summary: By using bionic virus-like-carbon microspheres as the anode host for potassium metal batteries, dendrite formation can be suppressed and volume change can be accommodated, resulting in stable cycle life and performance.
FUNDAMENTAL RESEARCH
(2023)
Article
Nanoscience & Nanotechnology
Mingrui Han et al.
Summary: The article discusses a method to improve the performance of potassium metal anodes using SnS2 nanosheets, achieving dendrite-free K metal anodes. Experimental results demonstrate that moderate specific surface area and stable potassiophilic sites are crucial for ensuring uniform electrodeposition of K.
ACS APPLIED MATERIALS & INTERFACES
(2022)
Article
Chemistry, Multidisciplinary
Yao Gao et al.
Summary: The mechanical stability of the solid electrolyte interphase (SEI) plays a crucial role in achieving exceptional cycling performance of K-metal batteries in low concentration carbonate electrolytes. Higher concentration electrolytes lead to increased inorganic content in SEI, which results in higher Young's modulus and ionic conductivity but lower elastic strain limit. SEI with low mechanical properties can trigger dendrite growth, highlighting the importance of optimizing SEI mechanical stability.
ADVANCED FUNCTIONAL MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Yixian Wang et al.
Summary: A new intermetallic compound NST-Na, fabricated through repeated cold rolling and folding, demonstrates outstanding electrochemical performance and stability. The thermodynamically stable face-centered-cubic structure of NST-Na allows for high efficiency in commonly used electrolytes, contributing to improved energy storage efficiency in sodium-metal batteries.
ADVANCED MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Xuemei Ma et al.
Summary: This work introduces organic-inorganic hybrid cathodes with a dual energy-storage mechanism for aqueous zinc-ion batteries, providing high specific capacity, elevated voltage, and excellent long-term cycle stability. Density functional theory calculations show remarkable electronic conductivity with an ultralow diffusion barrier, opening new research directions in high-energy secondary batteries.
ADVANCED MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Pengcheng Liu et al.
Summary: This study presents a multifunctional separator for potassium-metal batteries, utilizing tape-cast microscale AlF3 coated on polypropylene. The novel separator demonstrates excellent electrochemical performance, stability, and capacity retention in experiments.
ADVANCED MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Yu Jiang et al.
Summary: Metallic Na (K) is a promising anode material for Na-metal and K-metal batteries, but the growth of Na (K) dendrites affects their stability. This study introduces a heterogeneous interface layer to improve the performance of the batteries, resulting in enhanced lifespan, capacity, energy density, and power density.
ADVANCED MATERIALS
(2022)
Article
Chemistry, Physical
Rui Zhou et al.
Summary: This study investigates the impact of carbon microstructure on the stability of potassium metal anodes. Carbon nanofibers prepared at different carbonization temperatures demonstrate different performance as hosts for potassium metal anodes, with CNFs produced at 2800 degrees C showing higher stability. The research reveals that the carbon microstructure plays a crucial role in nucleation and diffusion of K ions, as well as in the mechanical properties of solid electrolyte interphases (SEIs), ultimately affecting the performance of potassium metal anodes.
Article
Chemistry, Physical
Lixin Qiao et al.
Summary: A non-corrosive sulfonimide salt is found to suppress corrosion of aluminum current collectors and improve the cycling performance of lithium metal batteries.
Article
Multidisciplinary Sciences
Yujing Liu et al.
Summary: In this study, self-assembled monolayers (SAMs) were utilized to control electrolyte degradation and solid-electrolyte interphase (SEI) formation in lithium metal batteries (LMBs), resulting in improved cycling performance and lifespan.
Article
Multidisciplinary Sciences
Zewen Zhang et al.
Summary: Characterizing liquid-solid interfaces remains challenging due to the limitations of existing tools. This study adopts a thin film vitrification method to preserve and study the structure and chemistry of key interfaces in batteries. The research reveals substantial swelling of the solid-electrolyte interphase (SEI) on lithium metal anodes in different electrolytes, with the swelling behavior correlated to battery performance.
Article
Chemistry, Multidisciplinary
Huiyu Jiang et al.
Summary: A scalable dealloying method is developed to prepare nano-sized bismuth, which improves the wettability of the separator and suppresses the growth of lithium dendrites. The modified separator exhibits high capacity retention in lithium metal batteries and stable cycling performance in potassium ion batteries, suggesting its potential for high-energy and high-safety battery development.
Article
Chemistry, Multidisciplinary
Sicen Yu et al.
Summary: A lightweight and easy-to-fabricate 3D host with optimum pore size has been developed to improve the cycle life of lithium metal anodes in lean electrolytes. This host, made from a vapor-grown carbon fiber (VGCF)-based slurry loaded with a rubidium nitrate salt additive, has uniform pores and high lithiophilicity. It demonstrates excellent performance in half-cell tests and full cells, showing potential for practical lithium-metal batteries.
Article
Chemistry, Physical
Jimin Park et al.
Summary: By developing a strategy for stabilizing potassium metal through simple interface control, this study successfully enables dense potassium plating with a dendrite-free morphology, improving the cycling stability of the battery.
ACS ENERGY LETTERS
(2022)
Article
Chemistry, Multidisciplinary
Jiashen Meng et al.
Summary: Potassium metal batteries are considered as a promising alternative to commercial LiFePO4 batteries for grid-scale energy storage systems. However, the growth of dendrites, large volume change, and unstable solid electrolyte interphase (SEI) on the potassium metal anode have been major obstacles for their widespread applications. In this study, a facile and efficient strategy was proposed to construct dendrite-free and practical carbon-based potassium composite anodes via amine functionalization of the carbon scaffolds. The resulting potassium composite anode demonstrated excellent rate capability and long-term cycling stability.
Article
Chemistry, Multidisciplinary
Jie Guan et al.
Summary: A high-performance phosphorene-carbon nanotubes/polyaniline composite is reported as an anode material in potassium-ion batteries. The carbon nanotubes improve electron transport and the polyaniline coating alleviates structural degradation caused by volume expansion, resulting in super-stable, high-performance potassium storage.
ADVANCED FUNCTIONAL MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Shang-Qi Li et al.
Summary: In this study, a composite material consisting of ultrathin MgF2 nanosheets encapsulated in hollow nanospheres was used to address the issues of lithium dendrite growth and volume change. The study explored the deposition behavior and mechanism of lithium in the composite material and achieved good cycling stability and reversible capacity.
ADVANCED MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Dongyang Shen et al.
Summary: Proton-ion batteries have gained attention for their reliability, safety, toxin-free nature, and low cost, but their development is still at an early stage due to the lack of proper electrolytes and cathodes. Researchers have introduced a novel cathode based on active nitrogen center and a quasi-solid electrolyte to enhance the battery's stability and prevent corrosion and dissolution of the active material. They have also demonstrated the excellent cycle performance of a metal-free, flexible, soft-packed battery.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2022)
Article
Chemistry, Physical
Yinxing Ma et al.
Summary: This study reports a novel scalable, ultrathin, and high-temperature-resistant solid polymer electrolyte (SPE) for all-solid-state batteries (ASSBs), which exhibits advantages in terms of stability and mechanical strength at the solid electrolyte/lithium interface, as well as safe operation at high temperatures, showing great potential for practical applications.
ADVANCED ENERGY MATERIALS
(2022)
Article
Chemistry, Physical
Qian Chen et al.
Summary: In this study, vertically aligned Ti3C2Tx MXene nanosheet arrays were used to regulate Li metal nucleation and deposition, resulting in high Coulombic efficiencies and stability.
ADVANCED ENERGY MATERIALS
(2022)
Article
Chemistry, Physical
Dongdong Li et al.
Summary: Inverted anode structure can effectively solve lithium dendrite issues, extend the cycle life of lithium metal anode, and exhibit good stability. This strategy can also be applied to other porous current collectors, providing opportunities for next-generation lithium-based batteries.
ADVANCED ENERGY MATERIALS
(2022)
Article
Chemistry, Physical
Jianyi Wang et al.
Summary: In this study, a K/Pd/Cu foam anode material with highly potassiophilic interface was prepared for KMB by coating a layer of Pd on the surface of Cu foam. Experimental results showed that this material can significantly reduce dendrite growth, enhance K+ ion diffusion within the solid electrolyte interface, and reduce side reactions.
Article
Chemistry, Physical
Wenhui Tang et al.
Summary: In this study, vdW ferroelectric tunnel junction (FTJ) memories based on few-layer alpha-In2Se3 were constructed, showing excellent and reliable performance at both room and high temperatures, as well as robust thermal stability.
Article
Engineering, Environmental
Jiaming Xiong et al.
Summary: In this study, a N-doped graphene nanomesh (NGM) was used as a conductive and potassiophilic host to improve the rate capability, prevent dendrite formation, and enhance the cycling stability of potassium metal anodes (KMAs). The NGM facilitated rapid transport of potassium ions and reduced the energy barrier for their deposition, resulting in an ultra-low overpotential and excellent cycling performance.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Chemistry, Physical
Qian Wang et al.
Summary: The study introduces a lead-free chiral metal halide crystal with excellent spin selectivity and film-forming ability. By synthesizing a composite structure containing NEA and tris(8-oxoquinoline)aluminum, highly efficient spin selectivity and extremely smooth film surfaces have been achieved.
Review
Chemistry, Physical
Xiangwei Guo et al.
Summary: The exotic topological phase in condensed matter physics and materials science has attracted considerable attention due to its intriguing physical insights. This review focuses on the polar topological phase, which combines topology and ferroelectricity, and discusses the important role of computational tools in designing polar topological phases in oxide heterostructures. The review further highlights the history of phase-field simulations for ferroelectric oxide heterostructures and summarizes the current research progress and future directions for the discovery of novel topological phases in ferroelectric systems.
Article
Materials Science, Multidisciplinary
Zhenghang Wei et al.
Summary: The future of high-energy density electrochemical energy storage systems relies on rechargeable batteries that utilize reactive metals as anodes. Potassium (K) metal secondary battery (KMB) is expected to replace lithium-ion batteries due to its abundant resource, high capacity, and low redox potential. However, the processing difficulty and instability at high temperatures hinder the development of KMBs.
ENERGY & ENVIRONMENTAL MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Hai Yang et al.
Summary: The study demonstrates that Na2Te/K2Te can improve Na+/K+ transport and suppress dendrite formation, offering a promising way to stabilize sodium (potassium)-metal anodes.
ADVANCED MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Zehang Sun et al.
Summary: The study developed an optimized Bi@N-CNCs electrode that showed great reversible capacities and long-term cyclic stability at high rates, providing new possibilities for anode materials in potassium ion batteries.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2021)
Article
Chemistry, Physical
Pengcheng Shi et al.
Summary: Introduction of an artificial Na3P layer on the surface of sodium metal anodes can achieve high-performance Na anodes by preventing dendrite growth and improving electrochemical performance. This method can also be applied to potassium metal anodes and extended to solid-state alkali metal batteries with high power density and energy density.
ADVANCED ENERGY MATERIALS
(2021)
Article
Multidisciplinary Sciences
Singyuk Hou et al.
Summary: Rechargeable magnesium and calcium metal batteries show promise as alternatives to lithium-ion batteries due to their high crustal abundance and capacity. By using a specific family of chelants, researchers were able to greatly improve the interfacial charge transfer kinetics and suppress side reactions, resulting in stable and highly reversible cycling performance for the batteries. This work provides a versatile electrolyte design strategy for divalent metal batteries.
Article
Chemistry, Multidisciplinary
Zexing Wu et al.
Summary: The study introduced the use of a metallic bismuth-tin aerogel for electrochemical reduction of CO2 with selective formic acid production, demonstrating high FEHCOOH and stability. Experimental and theoretical findings confirmed that the coexistence of bismuth and tin optimized the energy barrier for formic acid generation, enhancing catalytic activity.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2021)
Review
Chemistry, Physical
Ling Fan et al.
Summary: This review focuses on high-performance electrode materials and electrolytes for potassium-ion batteries (PIBs), evaluating their potential and challenges for market penetration. Discussions include the current status of PIBs in terms of safety, energy density, power density, cyclability, and sustainability, as well as future research directions for electrode materials, electrolytes, and electrode-electrolyte interfaces in order to commercialize potassium-based full batteries in the near future.
Article
Chemistry, Multidisciplinary
Rong Chao Cui et al.
Summary: The Bi NSs/NCNs as an anode demonstrates exceptional rate capabilities (489.3 mAh g(-1) at 50 A g(-1)) and long cycling stability (457.8 mAh g(-1) at 10 A g(-1) after 2000 cycles), surpassing all reported PIB anode materials. Such outstanding performance is mainly attributed to the stable solid-electrolyte interface formed in the glyme-based electrolyte and the unique interconnected porous nanostructure, both contributing to fast kinetics and high pseudocapacitive contributions during cycling.
ADVANCED FUNCTIONAL MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Qing Zhang et al.
Summary: Potassium-based solid electrolyte interphases (SEIs) are more beam sensitive compared to lithium-based SEIs due to a smaller damage threshold. Cryogenic transmission electron microscopy (cryo-TEM) at ultralow doses reveals the chemical composition of potassium SEI, which consists of large inorganic brackets and amorphous phases. The choice of organic phosphate-based electrolyte solvents results in a thin and stable SEI layer for enhanced cycling performance, while carbonate ester-based electrolytes deplete potassium reserves through the formation of metastable products in the SEI. These findings offer insights for selecting optimal electrolytes for potassium batteries.
ADVANCED MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Shuo Wang et al.
Summary: By designing a 3D polyvinyl-alcohol (PVA)-borax layer, dendrite-free potassium-metal batteries can be achieved with stable electrochemical performance. Experimental results show that the use of PVA-borax@Cu enables stable cycling at different depths of discharge.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2021)
Article
Chemistry, Multidisciplinary
Zhixin Tai et al.
Summary: A novel quasi-liquid potassium-sodium alloy anode with outstanding electrochemical performance has been reported, showing potential as a dendrite-free anode in rechargeable potassium metal batteries when paired with suitable cathode materials.
Article
Electrochemistry
Shufen Ye et al.
Summary: In this study, a 3D-Na3Bi/3D-K3Bi alloy host is designed to promote the homogeneous and heterogeneous nucleation growth of sodium/potassium metal anodes. This design effectively prevents dendrite growth and improves cycle performance by addressing volume expansion issues during cycling. The experimental results demonstrate promising cycling lifespans and sustainable cycle performance for sodium/potassium metal anodes.
Article
Multidisciplinary Sciences
Yongjin Fang et al.
Summary: In this study, a three-dimensional hybrid host was developed to inhibit dendritic lithium formation in lithium batteries, resulting in a more stable lithium plating/stripping behavior. When coupled with a commercial cathode, the assembled full cell showed high rate capability and stable cycling life.
Article
Materials Science, Multidisciplinary
Yanhong Feng et al.
Summary: The study successfully synthesized a low-cost carbon-based material, HGC, with a hollow structure and cross-linked architecture, providing stable performance in PIB anode, including low charge/discharge plateau, excellent specific capacity, and long cycle life.
ENERGY & ENVIRONMENTAL MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Xiao Tang et al.
ADVANCED MATERIALS
(2020)
Article
Chemistry, Multidisciplinary
Pengcheng Liu et al.
ADVANCED MATERIALS
(2020)
Article
Chemistry, Multidisciplinary
Huawen Huang et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2020)
Article
Chemistry, Multidisciplinary
Rong Chao Cui et al.
Article
Chemistry, Multidisciplinary
Kuan-Ting Chen et al.
Article
Chemistry, Physical
Jianyi Wang et al.
Article
Chemistry, Physical
Tao Chen et al.
Article
Nanoscience & Nanotechnology
Neng Xiao et al.
ACS APPLIED MATERIALS & INTERFACES
(2019)
Article
Chemistry, Physical
Huwei Wang et al.
ADVANCED ENERGY MATERIALS
(2019)
Article
Chemistry, Physical
Qing Zhang et al.
ADVANCED ENERGY MATERIALS
(2018)
Article
Chemistry, Multidisciplinary
Xiaoyang Cui et al.
ADVANCED FUNCTIONAL MATERIALS
(2016)
Article
Energy & Fuels
Kai Yan et al.
Article
Nanoscience & Nanotechnology
Guangyuan Zheng et al.
NATURE NANOTECHNOLOGY
(2014)
Review
Chemistry, Physical
Haibo Wang et al.
Article
Chemistry, Multidisciplinary
Akbar Bagri et al.
