☆ 4.8 Article

Incorporation of Heteroatomic Fe Activates Rapid Catalytic Behaviors of Co3O4 Hollow Nanoplates Toward Advanced Lithium-Sulfur Batteries

ADVANCED FUNCTIONAL MATERIALS (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

Design of Quasi-MOF Nanospheres as a Dynamic Electrocatalyst toward Accelerated Sulfur Reduction Reaction for High-Performance Lithium-Sulfur Batteries

Dan Luo et al.

Summary: This study presents a strategy to design quasi-MOF nanospheres as sulfur electrocatalysts by incorporating a transition-state structure between MOF and metal oxides via controlled ligand exchange strategy. The quasi-MOF inherits the porous structure of MOF and exposes abundant metal nodes to act as active sites for strong LiPs absorbability, resulting in remarkable catalytic activity and long-term cycling stability in Li-S batteries.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Design Rules of a Sulfur Redox Electrocatalyst for Lithium-Sulfur Batteries

Li Wang et al.

Summary: This study seeks an electrochemical catalyst for the liquid-to-solid conversion of soluble lithium polysulfides in lithium-sulfur batteries. The use of Mn-based mullite catalyst enhances the performance of the sulfur redox reaction and inhibits the shuttle effect. Theoretical calculations and experimental results demonstrate the effective coupling between the catalyst and polysulfides, leading to improved cycling stability and areal capacity in the Li-S battery.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Uniformly Controlled Treble Boundary Using Enriched Adsorption Sites and Accelerated Catalyst Cathode for Robust Lithium-Sulfur Batteries

Rongrong Chu et al.

Summary: This study enhances the adsorption ability and reaction rate of high order lithium polysulfides in lithium-sulfur batteries by designing a heterostructure, leading to excellent rate performance and long-term stability.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Nitrogen-doped porous carbon fiber/vertical graphene as an efficient polysulfide conversion catalyst for high-performance lithium-sulfur batteries

Junsheng Lin et al.

Summary: A freestanding sulfur cathode based on nitrogen-doped porous carbon fiber/vertical graphene composites is proposed in this study, showing enhanced absorption and catalytic conversion kinetics of polysulfides, as well as high cycling stability and competitiveness as a sulfur host for Li-S batteries.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Add to Collection

Article Chemistry, Physical

Construction of Ti4O7/TiN/carbon microdisk sulfur host with strong polar N-Ti-O bond for ultralong life lithium-sulfur battery

Linlin Ma et al.

Summary: The study focuses on constructing a porous microdisk Ti4O7/TiN/C heterojunction with strong polar N-Ti-O covalent bonds at the interface, which helps achieve effective adsorption and conversion of LiPSs, thus efficiently restraining the shuttle effect. The design strategy shows outstanding specific capacity and cycling retention at different current densities.

ENERGY STORAGE MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Heterostructure ZnSe-CoSe2 embedded with yolk-shell conductive dodecahedral as Two-in-one hosts for cathode and anode protection of Lithium-Sulfur full batteries

Jing Xu et al.

Summary: Simultaneously protecting the cathode and anode is crucial for practical lithium sulfur batteries. In this study, a new carrier structure was designed to protect both the sulfur cathode and lithium anode. The carrier structure exhibited superior electronic conductivity, polysulfide adsorption capacity, and catalytic activity for polysulfide redox, leading to improved cycle life and energy density of the Li-S batteries.

ENERGY STORAGE MATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Multidimensional Hybrid Architecture Encapsulating Cobalt Oxide Nanoparticles into Carbon Nanotube Branched Nitrogen-Doped Reduced Graphene Oxide Networks for Lithium-Sulfur Batteries

Jeong Seok Yeon et al.

Summary: The multidimensional architectured hybrid (Co@CNT/nG) suppresses the shuttle effect of lithium polysulfides and enhances conversion redox kinetics for improved sulfur utilization in lithium-sulfur batteries. Through various measurements, it is demonstrated that the Co@CNT/nG-70S-based LSB cells achieve a high-specific capacity of 1193.1 mAh g(-1) and a low capacity decay rate of 0.030% per cycle for 700 cycles, delivering a high areal capacity of 5.62 mAh cm(-2).

ENERGY & ENVIRONMENTAL MATERIALS (2022)

Add to Collection

Article Engineering, Environmental

Co/Co3O4-embedded N-doped hollow carbon composite derived from a bimetallic MOF/ZnO Core-shell template as a sulfur host for Li-S batteries

Youngmoo Jeon et al.

Summary: The study successfully synthesized N-doped hollow carbon composite embedded with well-dispersed Co/Co3O4 nanoparticles via the carbonization of a Zn/Co bimetallic metal-organic frameworks/ZnO nanospheres core-shell structure. The sulfur-infiltrated Co/Co3O4-NHC cathode exhibited excellent rate performance and stability, retaining 87.8% of specific capacity after 250 cycles, showing promise for high-performance Li-S batteries. This work provides insights on designing sulfur host materials for next-generation energy storage technology.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Basal-Plane-Activated Molybdenum Sulfide Nanosheets with Suitable Orbital Orientation as Efficient Electrocatalysts for Lithium-Sulfur Batteries

Da Tian et al.

Summary: CNT@MoS2-B nanosheets, with B-doping, serve as catalysts to enhance Li-S batteries' performance by improving the reactivity of the MoS2 basal plane for Li2S formation and dissolution kinetics. The incorporation of B significantly increases the reactivity of MoS2 basal plane, leading to high rate capability and outstanding cycling stability of S/CNT@MoS2-B cathodes, offering fresh insights for developing effective catalysts to accelerate LiPS conversion.

ACS NANO (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Hierarchically Porous Ti3C2 MXene with Tunable Active Edges and Unsaturated Coordination Bonds for Superior Lithium-Sulfur Batteries

Tong Wang et al.

Summary: The hierarchical porous MXene microspheres fabricated through spray drying and chemical etching strategies offer uniform sulfur distribution, prevent restacking of MXene sheets, and provide abundant active edges for strong lithium polysulfide adsorption. These structural advantages enhance cycling and rate performances of sulfur cathode, even under high sulfur loading and low electrolyte content.

ACS NANO (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Strategy of Enhancing the Volumetric Energy Density for Lithium-Sulfur Batteries

Ya-Tao Liu et al.

Summary: This review focuses on the challenges and key factors in improving the volumetric energy density of lithium-sulfur batteries, proposes strategies for overcoming these challenges, and discusses key technologies for improving performance by enhancing the cathode materials.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Strain Engineering of a MXene/CNT Hierarchical Porous Hollow Microsphere Electrocatalyst for a High-Efficiency Lithium Polysulfide Conversion Process

Xin Wang et al.

Summary: Tensile-strained Mxene/CNT porous microspheres were developed as an electrocatalyst for the lithium polysulfide redox reaction, with internal stress, macroporous framework, and CNT interwoven enhancing their electrochemical performance.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Review Chemistry, Physical

Emerging Catalysts to Promote Kinetics of Lithium-Sulfur Batteries

Peng Wang et al.

Summary: This article summarizes the latest advances in emerging catalytic candidates for lithium-sulfur batteries (LSBs), including the use of traditional metal-based materials and novel catalytic materials to improve LSB performance. New insights are also presented, such as strategies like exposing active sites and adsorption-catalysis synergy, to aid in designing high-performance LSBs.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Review Chemistry, Physical

Encapsulation methods of sulfur particles for lithium-sulfur batteries: A review

Shiqi Li et al.

Summary: This review discusses the application of core-shell structured sulfur composite nanoparticles and their derivatives in Li-S batteries, focusing on the encapsulation strategy for producing optimally structured sulfur NPs. It analyzes the strengths and weaknesses of various methods, as well as the electrochemical properties and performance of resulting NPs in LSB technology.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Rational Designs for Lithium-Sulfur Batteries with Low Electrolyte/Sulfur Ratio

Junling Guo et al.

Summary: Lithium-sulfur batteries have high theoretical energy density but face challenges like lithium polysulfide shuttles, low sulfur utilization, and unstable Li metal anodes. To move towards industrialization, attention is focused on reducing the electrolyte/sulfur ratio while ensuring electrochemical performance. Recent research has highlighted strategies to address issues resulting from low electrolyte/sulfur ratio, such as preventing polysulfide aggregation.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Dense-Stacking Porous Conjugated Polymer as Reactive-Type Host for High-Performance Lithium Sulfur Batteries

Xiaowei Wang et al.

Summary: The study developed a densely stacked HATN polymer as the electrode material for lithium-sulfur batteries, with high surface area and bulk density to increase sulfur loading and improve kinetics. The electrode demonstrated high energy density and cycling stability.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Chemistry, Multidisciplinary

The Dual Functions of Defect-Rich Carbon Nanotubes as Both Conductive Matrix and Efficient Mediator for Li-S Batteries

Jicheng Jiang et al.

Summary: Introducing defects in carbon nanotubes to anchor polysulfides and accelerate electrochemical reactions can dramatically improve cycling and rate performance of Li-S batteries. The defect-rich carbon has a higher binding energy with polysulfides, allowing for cycling stability up to 1000 cycles even under high sulfur loading and lean electrolyte conditions. This new design strategy may lead to mediator-like carbon materials with good conductivity and high catalytic activity for Li-S batteries.

SMALL (2021)

Add to Collection

Review Chemistry, Physical

Recent Advances in Heterostructure Engineering for Lithium-Sulfur Batteries

Shaozhuan Huang et al.

Summary: Lithium-sulfur batteries show promise as a next-generation energy storage solution due to their economic attractiveness and high energy density, but face challenges such as the shuttling effect of lithium polysulfides and uncontrollable Li dendritic formation. Various strategies have been proposed to address these issues, with a focus on trapping polysulfides, catalyzing their conversion, and regulating Li plating/stripping. Designing and constructing heterostructured materials is seen as a promising approach to potentially resolve these challenges.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Hierarchical Nanoreactor with Multiple Adsorption and Catalytic Sites for Robust Lithium-Sulfur Batteries

Ban Fei et al.

Summary: Developing high-performance cathode host materials is crucial for solving the issues of low sulfur utilization, sluggish redox kinetics, and LiPS shuttle effect in lithium-sulfur batteries. The multifunctional Ag/VN@Co/NCNT nanocomposite with hierarchical nano-reactors shows outstanding electrochemical performances, bringing lithium-sulfur batteries closer to practical application.

ACS NANO (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Lithium-Sulfur Battery Cathode Design: Tailoring Metal-Based Nanostructures for Robust Polysulfide Adsorption and Catalytic Conversion

Sue-Faye Ng et al.

Summary: Lithium-sulfur (Li-S) batteries have high specific energy capacity and density, making them promising successors to lithium-ion batteries. However, obstacles such as low sulfur conductivity and volume expansion of sulfur electrodes have led to research focusing on metal-based compounds to address issues like the polysulfide shuttle effect. The review highlights the need for smart catalyst design to overcome challenges in the practical application and commercialization of Li-S batteries.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Multifunction Co-Nx species to manipulate polysulfides conversion kinetics toward highly efficient lithium-sulfur batteries

Donghua Wang et al.

Summary: A new type of three-dimensional freestanding framework sulfur cathode has been synthesized and investigated for lithium-sulfur batteries, which can efficiently solve the problems of low sulfur loading, shuttling, and sluggish conversion. The material exhibits high capacity and excellent cycling performance, even under high sulfur loading and lean electrolyte conditions, achieving high areal capacity.

NANO ENERGY (2021)

Add to Collection

Article Chemistry, Physical

Single-Metal-Atom Dopants Increase the Lewis Acidity of Metal Oxides and Promote Nitrogen Fixation

Jinsun Lee et al.

Summary: This study found that tuning the electronic structure of defective Co3O4 via single-Ru-atom dopant can enhance N-2 adsorption, stabilize key N-intermediates, and significantly boost NH3 selectivity.

ACS ENERGY LETTERS (2021)

Add to Collection

Article Chemistry, Physical

Sauna Activation toward Intrinsic Lattice Deficiency in Carbon Nanotube Microspheres for High-Energy and Long-Lasting Lithium-Sulfur Batteries

Yongguang Zhang et al.

Summary: By improving the intrinsic lattice defect engineering in carbon-based sulfur host materials, this study successfully addresses the challenges in lithium-sulfur battery technology and achieves excellent electrochemical performance and stability.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Review Chemistry, Physical

Realizing high-performance lithium-sulfur batteries via rational design and engineering strategies

Wenjing Deng et al.

Summary: Lithium-sulfur batteries have shown promise as a high-energy, environmentally friendly, and low-cost option for rechargeable batteries, but they face challenges such as irreversible relocation of polysulfides, slow reaction kinetics, and low reliability of lithium anode. Research is ongoing to address these issues and advance the development of viable LSBs for high-performance technology with high energy density and long cycling stability.

NANO ENERGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Ultrahigh-Volumetric-Energy-Density Lithium-Sulfur Batteries with Lean Electrolyte Enabled by Cobalt-Doped MoSe2/Ti3C2Tx MXene Bifunctional Catalyst

Wei Wang et al.

Summary: The study introduces a new sulfur host material for Li-S batteries, which achieves high energy density and capacity through smart design and a novel bifunctional catalyst. The incorporation of Co element enhances the material's electronic conductivity and catalytic activity, leading to fast redox kinetics and uniform Li2S nucleation in a dense high-sulfur-loaded cathode.

ACS NANO (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Defects Engineering of Lightweight Metal-Organic Frameworks-Based Electrocatalytic Membrane for High-Loading Lithium-Sulfur Batteries

Sha Li et al.

Summary: The introduction of defect engineering strategy to construct an electrocatalytic membrane enhances the conversion rate of lithium polysulfides in lithium-sulfur batteries, delivering high capacity and cycling stability under high sulfur loadings and low electrolyte/sulfur ratio conditions.

ACS NANO (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Identifying the Evolution of Selenium-Vacancy-Modulated MoSe2 Precatalyst in Lithium-Sulfur Chemistry

Menglei Wang et al.

Summary: This study presents a novel catalyst SeVs-MoSe2 and investigates its performance in Li-S batteries, demonstrating that the MoSeS catalyst can enhance battery performance. The work provides important insights for designing efficient electrocatalysts.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Chemistry, Physical

Crystal Splintering of β-MnO2 Induced by Interstitial Ru Doping Toward Reversible Oxygen Conversion

Yindong Gu et al.

Summary: This study presents the phenomenon of crystal splintering induced by interstitial atomic doping for enhancing the activities of both oxygen evolution and oxygen reduction reactions in beta-MnO2. The Ru-doped beta-MnO2 exhibits an ultralow OER and ORR voltage gap, surpassing many state-of-the-art bifunctional oxygen catalysts reported to date. The improved OER activity is attributed to the highly under-coordinated Ru-O sites exposed on the surface upon crystal splintering, while the enhanced ORR property originates from the strained M-O configuration with enriched Mn3+ content and oxygen vacancies.

CHEMISTRY OF MATERIALS (2021)

Add to Collection

Article Multidisciplinary Sciences

Amorphization-induced surface electronic states modulation of cobaltous oxide nanosheets for lithium-sulfur batteries

Ruilong Li et al.

Summary: Amorphization-induced surface electronic states modulation significantly improves the polysulfides adsorption capability of cobaltous oxide, leading to enhanced performance and cycling stability of lithium-sulfur batteries. Compared to crystalline materials, amorphous cobaltous oxide nanosheets demonstrate superior adsorption of polysulfides, making them a promising candidate for cathode additives in Li-S batteries.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Multidisciplinary Sciences

Thickness-independent scalable high-performance Li-S batteries with high areal sulfur loading via electron-enriched carbon framework

Nana Wang et al.

Summary: By utilizing free-standing and low-tortuosity carbon frameworks as hosts for sulfur and lithium, the authors were able to achieve scalable thickness-independent electrochemical performance.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Chemistry, Physical

Design Zwitterionic Amorphous Conjugated Micro-/Mesoporous Polymer Assembled Nanotentacle as Highly Efficient Sulfur Electrocatalyst for Lithium-Sulfur Batteries

Jiabing Liu et al.

Summary: A novel conjugated micro/mesoporous polymer (ST-CMP) has been developed as a highly efficient sulfur electrocatalyst for Li-S batteries, showing remarkable redox reaction kinetics. The design of a cross-linked CNT conductive network and prevention of polymer aggregation contribute to improved electron transfer efficiency and reaction rate for active materials.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Amorphizing metal-organic framework towards multifunctional polysulfide barrier for high-performance lithium-sulfur batteries

Xiaomin Zhang et al.

Summary: This study presents a novel strategy for efficient lithium-sulfur battery electrochemistry by modifying the separator with amorphous metal organic framework (MOF). The aMIL-88B-modified separator exhibits superior cyclability and high capacity retention in lithium-sulfur batteries.

NANO ENERGY (2021)

Add to Collection

Review Chemistry, Physical

Recent progress of functional separators with catalytic effects for high-performance lithium-sulfur batteries

Cheng Yuan et al.

Summary: Lithium-sulfur (Li-S) batteries are considered promising energy storage systems, but face challenges such as polysulfide shuttle effect and sluggish reaction kinetics. Various strategies, including functionalizing separators with catalytic materials, have been adopted to improve battery performance. Functional separators can effectively inhibit polysulfide shuttle effect and accelerate sulfur redox reaction kinetics for enhanced electrochemical performance.

NANO ENERGY (2021)

Add to Collection

Review Chemistry, Physical

Carbon-based flexible self-supporting cathode for lithium-sulfur batteries: Progress and perspective

Qinghuiqiang Xiao et al.

Summary: The article introduces the fabrication methods and research progress of flexible self-supporting cathodes with carbon materials as the substrate, emphasizing that carbon materials can meet the mechanical and electrochemical requirements of flexible electrodes, providing useful guidance for research in the field of LSB.

CARBON ENERGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Low-Bandgap Se-Deficient Antimony Selenide as a Multifunctional Polysulfide Barrier toward High-Performance Lithium-Sulfur Batteries

Yuan Tian et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Defect-Rich Multishelled Fe-Doped Co3O4 Hollow Microspheres with Multiple Spatial Confinements to Facilitate Catalytic Conversion of Polysulfides for High-Performance Li-S Batteries

Wenjuan Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Built-In Catalysis in Confined Nanoreactors for High-Loading Li-S Batteries

Qingping Wu et al.

ACS NANO (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Regulating Uniform Li Plating/Stripping via Dual-Conductive Metal-Organic Frameworks for High-Rate Lithium Metal Batteries

Tian-Shi Wang et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Metal Atom-Doped Co3O4Hierarchical Nanoplates for Electrocatalytic Oxygen Evolution

Song Lin Zhang et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

A fundamental look at electrocatalytic sulfur reduction reaction

Lele Peng et al.

NATURE CATALYSIS (2020)

Add to Collection

Article Chemistry, Physical

N/O dual-doped hollow carbon microspheres constructed by holey nanosheet shells as large-grain cathode host for high loading Li-S batteries

Xuejun Zhou et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Redox-Inert Fe3+ Ions in Octahedral Sites of Co-Fe Spinel Oxides with Enhanced Oxygen Catalytic Activity for Rechargeable Zinc-Air Batteries

Xiao-Tong Wang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Add to Collection

Article Chemistry, Physical

Exceptional adsorption and catalysis effects of hollow polyhedra/carbon nanotube confined CoP nanoparticles superstructures for enhanced lithium-sulfur batteries

Zhengqing Ye et al.

NANO ENERGY (2019)

Add to Collection

Article Engineering, Environmental

Template-free synthesis of multifunctional Co3O4 nanotubes as excellent performance electrode materials for superior energy storage

Jixing Wang et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Stringed tube on cube'' nanohybrids as compact cathode matrix for high-loading and lean-electrolyte lithium-sulfur batteries

Gaoran Li et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Add to Collection

Article Chemistry, Physical

Metal-organic frameworks (ZIF-67) as efficient cocatalysts for photocatalytic reduction of CO2: the role of the morphology effect

Mang Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Add to Collection

Article Chemistry, Physical

MOF-derived porous N-Co3O4@N-C nanododecahedra wrapped with reduced graphene oxide as a high capacity cathode for lithium-sulfur batteries

Jing Xu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Add to Collection

Article Chemistry, Multidisciplinary

A Polysulfide-Immobilizing Polymer Retards the Shuttling of Polysulfide Intermediates in Lithium-Sulfur Batteries

Shuibin Tu et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Efficient entrapment and catalytic conversion of lithium polysulfides on hollow metal oxide submicro-spheres as lithium-sulfur battery cathodes

Feng Ma et al.

NANOSCALE (2018)

Add to Collection

Article Chemistry, Physical

Co3O4 nanoneedle arrays as a multifunctional super-reservoir electrode for long cycle life Li-S batteries

Zhi Chang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Chemistry, Physical

Perovskite La0.6Sr0.4CoO3-δ as a new polysulfide immobilizer for high-energy lithium-sulfur batteries

Zhangxiang Hao et al.

NANO ENERGY (2017)

Add to Collection

Article Energy & Fuels

Direct observation of lithium polysulfides in lithium-sulfur batteries using operando X-ray diffraction

Joanna Conder et al.

NATURE ENERGY (2017)

Add to Collection

© Peeref 2019-2024. All rights reserved.