☆ 4.8 Article

Precise Engineering of Octahedron-Induced Subcrystalline CoMoO4 Cathode Catalyst for High-Performance Li-Air Batteries

ADVANCED FUNCTIONAL MATERIALS (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

A cascade protection strategy from cathode to anode with high air stability for ultralong life Li-air batteries in ambient conditions

Yinan Zhang et al.

Summary: A cascade cathode to anode protection strategy is developed to enable aprotic Li-air batteries to work in an actual air environment, resulting in an extralong cycling life. This is the first Li-air battery with a cycle life exceeding 1400 h in an air environment, providing new insight into their practicability.

ENERGY STORAGE MATERIALS (2023)

Add to Collection

Review Chemistry, Multidisciplinary

Criteria for evaluating lithium-air batteries in academia to correctly predict their practical performance in industry

Shoichi Matsuda et al.

Summary: Theoretical energy density of conventional LiBs is insufficient for advanced energy storage, leading to the exploration of lithium-air batteries (LABs) with higher theoretical energy density. However, actual energy density of LABs is often lower due to excess electrolyte. This review article estimates practical energy density of LABs and identifies critical factors for improving their energy density, proposing criteria for evaluating LABs in industry.

MATERIALS HORIZONS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Coupling Water-Proof Li Anodes with LiOH-Based Cathodes Enables Highly Rechargeable Lithium-Air Batteries Operating in Ambient Air

Jiang Lei et al.

Summary: A novel lithium-oxygen full cell has been developed, coupling a protected lithium anode with a LiOH-based cathode, allowing dendrite-free lithium stripping/plating in a wet nonaqueous electrolyte, with better resistance to humidity and CO2 contamination, promising the development of a long-life, high-energy lithium-air battery.

ADVANCED SCIENCE (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Advanced electrospun nanofibers as bifunctional electrocatalysts for flexible metal-air (O2) batteries: Opportunities and challenges

Shujing Li et al.

Summary: This review summarizes the advanced electrospun carbon nanofiber-based electrocatalysts for flexible metal-air batteries and discusses the advantages, characteristics, and special requirements of different nanofibers and various flexible metal-air batteries. Moreover, the current challenges and future prospects in the development of electrospun carbon nanomaterials for flexible metal-air cathode catalysts are rationally analyzed.

MATERIALS & DESIGN (2022)

Add to Collection

Article Chemistry, Physical

Decoupling mass transport and electron transfer by a double-cathode structure of a Li-O2 battery with high cyclic stability

Qing Han et al.

Summary: The use of a double-cathode structure in lithium-oxygen batteries can decouple oxygen mass transport and electron transfer, leading to improved cyclic stability and increased cycle life. This concept can also be applied to other metal-rechargeable batteries with conversion-type chemistry.

JOULE (2022)

Add to Collection

Article Chemistry, Physical

2D SnSe Cathode Catalyst Featuring an Efficient Facet-Dependent Selective Li2O2 Growth/Decomposition for Li-Oxygen Batteries

Guoliang Zhang et al.

Summary: 2D materials with layered structure, unique electronic properties, and high stability have attracted much attention in the field of cathode catalysts for lithium-oxygen batteries (LOBs). In this study, tin selenide nanosheets with a black phosphorus-like 2D structure were synthesized and used as the cathode catalyst for LOBs. The exposed stack (200) facets and stack edge facets of SnSe nanosheets exhibited superior specific capacity and ultralong cycle stability in LOBs. Experimental and theoretical studies revealed that the 2D surface facets promoted the formation and stabilization of discharge products through the confined adsorption of Li2O2, leading to efficient formation/decomposition of discharge products.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Towards practically accessible aprotic Li-air batteries: Progress and challenges related to oxygen-permeable membranes and cathodes

Xiaohong Zou et al.

Summary: Aprotic Li-air (O-2) batteries (ALBs) have the potential to power electric vehicles with energy density 3-5 times higher than state-of-the-art Li-ion batteries, but are hindered by O-2-breathing and O-2 (electro)-chemistry issues. Recent research has shown that oxygen permeable membranes (OPMs) and oxygen permeable cathodes (OPCs) can improve the cycling life and energy efficiency of ALBs. However, there are still scientific and technical challenges to overcome for ALBs to reach industrial standards.

ENERGY STORAGE MATERIALS (2022)

Add to Collection

Review Chemistry, Physical

The study of different redox mediators for competent Li-air batteries

Ghadia Ahmed et al.

Summary: Li-air batteries are environmentally friendly and compact energy storage solutions with superior performance and high energy density. However, they face challenges such as high overpotential and parasitic reactions. Research has shown that optimizing redox mediators and electrolyte can reduce these issues and improve the efficiency and stability of Li-air batteries.

JOURNAL OF POWER SOURCES (2022)

Add to Collection

Article Chemistry, Physical

Electronic Bridge Construction via Ag Intercalation to Diminish Catalytic Anisotropy for 2D Tin Diselenide Cathode Catalyst in Lithium-Oxygen Batteries

Guoliang Zhang et al.

Summary: This study proposes an ion-intercalation strategy to diminish the catalytic anisotropy of 2D materials for better lithium-oxygen battery performance. The results demonstrate that intercalated Ag ions can regulate the electronic states between stack edge planes, significantly enhancing the catalytic capability of 2D materials. It can efficiently accelerate charge transfer and suppress passivation during the oxygen reduction/evolution reaction process.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Low-viscosity quaternary ammonium-based ionic liquid electrolytes for lithium air batteries

Hyunjee Yoon et al.

Summary: Ionic liquids (ILs) have potential as electrolyte solvents for Li-air batteries due to their unique properties. However, the high viscosity of IL-based electrolytes limits battery performance. This study successfully synthesized low-viscosity ILs and demonstrated their improved performance in cell tests. The optimized IL N111(1O2) FSI showed significantly higher initial capacity compared to the reference material DEME FSI.

JOURNAL OF MOLECULAR LIQUIDS (2022)

Add to Collection

Article Chemistry, Physical

Recent advances of anode protection in solid-state lithium metal batteries

Junbao Kang et al.

Summary: Solid-state lithium metal batteries (SSLMBs) are considered promising candidates for next-generation energy storage devices due to their superior energy density and excellent safety. However, the growth ability of lithium (Li) dendrites in SSLMBs has been identified as a significant challenge. This review provides an analysis of the formation of Li dendrites and discusses various strategies to inhibit their growth. It also offers prospects for the research and development of Li anode protection in SSLMBs.

ENERGY STORAGE MATERIALS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Critical Advances in Ambient Air Operation of Nonaqueous Rechargeable Li-Air Batteries

Lili Liu et al.

Summary: Research has found that lithium-air batteries operating in ambient air face challenges such as H2O and CO2, which need to be overcome by improving oxygen-selective membranes, catalysts, and electrolyte alternatives. Furthermore, separator modification and lithium anode protection are important steps in addressing these issues. Challenges and directions for the future development of Li-air batteries are also discussed.

SMALL (2021)

Add to Collection

Article Nanoscience & Nanotechnology

High-Rate Long Cycle-Life Li-Air Battery Aided by Bifunctional InX3 (X = I and Br) Redox Mediators

Sina Rastegar et al.

Summary: This study explores a novel synergy among InX3 bifunctional RMs, MoS2 nanoflakes, hybrid electrolyte, and LiTFSI salt to achieve long cycle-life operations of Li-O-2 batteries in a dry air environment at high charge-discharge rates. Experimental results demonstrate that batteries with InI3 or InBr3 as RMs exhibit significantly improved cycle life and current rates in a dry air atmosphere.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Deciphering the Enigma of Li2CO3 Oxidation Using a Solid-State Li-Air Battery Configuration

Fangling Jiang et al.

Summary: In this study, a solid-state Li-O2 battery was designed to investigate the oxidation of Li2CO3, revealing that Li2CO3 can be oxidized to CO2 and O2 in a more stable battery configuration. This highlights the feasibility of reversible operation of Li-O2 batteries with ambient air as the feeding gas.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Physical

Constructing in-situ polymerized electrolyte on lithiophilic anode for high-performance lithium-air batteries operating in ambient conditions

Chen Wang et al.

Summary: The DES-PE@Li/SC based Li-air battery shows excellent performance with high capacity, high capacity retention even under high current, and long cycling life, which is achieved through the synergistic effect of SC skeleton and DES-PE.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Multidisciplinary Sciences

A highly stable and flexible zeolite electrolyte solid-state Li-air battery

Xiwen Chi et al.

Summary: Solid-state lithium-air batteries with integrated ultrathin, high-ion-conductive zeolite X membrane as the sole solid electrolyte exhibit excellent electrochemical performance, flexibility, and stability. These batteries have a high capacity and cycle life, outperforming batteries based on other materials under the same conditions, and show potential for practical applicability in various energy-storage systems.

NATURE (2021)

Add to Collection

Article Engineering, Environmental

Rational reconfiguration of a gradient redox mediator with in-situ fabricated gel electrolyte for Li?air batteries

Yinwei Fu et al.

Summary: By utilizing a gradient RM gel electrolyte, flexible lithium-air batteries can achieve higher mid-charging potentials, improved cycle performance and energy efficiency, as well as extended battery life. The gel electrolyte also offers device flexibility, allowing laminated cells to operate under harsh bending conditions.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Physical

Phase modulation of 1T/2H MoSe2 nanoflowers for highly efficient bifunctional electrocatalysis in rechargeable Li-O2 batteries

Qing Xia et al.

Summary: By combining MoSe2 catalysts with hybrid 1T and 2H phases, this study has successfully enhanced the electrocatalytic performance of Li-O-2 batteries, promoting oxygen reduction reaction and oxygen evolution reaction, and improving interfacial charge transfer kinetics.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Chemistry, Physical

Highly Efficient Nb2C MXene Cathode Catalyst with Uniform O-Terminated Surface for Lithium-Oxygen Batteries

Gaoyang Li et al.

Summary: The study demonstrates the catalytic capability of Nb2C MXene as a cathode material for LOBs, highlighting its superior electrocatalytic performance and high-rate cycle stability.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Nickel-doped cobalt molybdate nanorods with excellent cycle stability for aqueous asymmetric supercapacitor

Xiaodan Zhang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Add to Collection

Article Chemistry, Physical

Adaptive formed dual-phase interface for highly durable lithium metal anode in lithium-air batteries

Wei Liang et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Kinetically Stable Oxide Overlayers on Mo3P Nanoparticles Enabling Lithium-Air Batteries with Low Overpotentials and Long Cycle Life

Alireza Kondori et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of europium doping on the structural phase-transition temperature of β- and α - CoMoa4 polymorphs

Rosiane K. S. Costa et al.

MATERIALS RESEARCH BULLETIN (2019)

Add to Collection

Article Chemistry, Physical

Oxygen vacancies promoting the electrocatalytic performance of CeO2 nanorods as cathode materials for Li-O2 batteries

Yue Hou et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Achilles' Heel of Lithium-Air Batteries: Lithium Carbonate

Zhiwei Zhao et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Add to Collection

Article Electrochemistry

Metal-oxygen bonds: Stabilizing the intermediate species towards practical Li-air batteries

Yuyang Hou et al.

ELECTROCHIMICA ACTA (2018)

Add to Collection

Article Chemistry, Physical

Cobalt phosphide microsphere as an efficient bifunctional oxygen catalyst for Li-air batteries

Feng Zhang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection

Article Engineering, Electrical & Electronic

Structural properties of tungsten-doped cobalt molybdate and its application in electrochemical oxygen evolution reaction

Doldet Tantraviwat et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2018)

Add to Collection

Article Chemistry, Physical

A flexible polymer-based Li-air battery using a reduced graphene oxide/Li composite anode

Ziyang Guo et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Add to Collection

Article Multidisciplinary Sciences

A lithium-oxygen battery with a long cycle life in an air-like atmosphere

Mohammad Asadi et al.

NATURE (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Flexible, Flame-Resistant, and Dendrite-Impermeable Gel-Polymer Electrolyte for Li-O-2/Air Batteries Workable Under Hurdle Conditions

Xiaohong Zou et al.

SMALL (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Flexible Lithium-Air Battery in Ambient Air with an InSitu Formed Gel Electrolyte

Xiaofeng Lei et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Add to Collection

Article Chemistry, Physical

Ultra-fine surface solid-state electrolytes for long cycle life all-solid-state lithium-air batteries

Sheng Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Add to Collection

Article Chemistry, Multidisciplinary

A Li-Air Battery with Ultralong Cycle Life in Ambient Air

Lie Wang et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

MCNTs@MnO2 Nanocomposite Cathode Integrated with Soluble O2-Carrier Co-salen in Electrolyte for High-Performance Li-Air Batteries

Xiaofei Hu et al.

NANO LETTERS (2017)

Add to Collection

Article Chemistry, Physical

Towards real Li-air batteries: A binder-free cathode with high electrochemical performance in CO2 and O2

Qian-Cheng Zhu et al.

ENERGY STORAGE MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

A nano-structured RuO2/NiO cathode enables the operation of non-aqueous lithium-air batteries in ambient air

P. Tan et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Critical Role of Redox Mediator in Suppressing Charging Instabilities of Lithium-Oxygen Batteries

Zhuojian Liang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Add to Collection

Article Chemistry, Physical

MnOx decorated CeO2 nanorods as cathode catalyst for rechargeable lithium-air batteries

Yongqiang Zhu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Electrochemical performance of an asymmetric supercapacitor based on graphene and cobalt molybdate electrodes

Ganesh Kumar Veerasubramani et al.

RSC ADVANCES (2015)

Add to Collection

Article Nanoscience & Nanotechnology

A Li-O2/Air Battery Using an Inorganic Solid-State Air Cathode

Xiaofei Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

Add to Collection

Article Nanoscience & Nanotechnology

Interconnected Network of CoMoO4 Submicrometer Particles As High Capacity Anode Material for Lithium Ion Batteries

Christie T. Cherian et al.

ACS APPLIED MATERIALS & INTERFACES (2013)

Add to Collection

Article Chemistry, Multidisciplinary

The Carbon Electrode in Nonaqueous Li-O2 Cells

Muhammed M. Ottakam Thotiyl et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)

Add to Collection

Article Nanoscience & Nanotechnology

Commentary: The Materials Project: A materials genome approach to accelerating materials innovation

Anubhav Jain et al.

APL MATERIALS (2013)

Add to Collection

Review Chemistry, Physical

Li-O2 and Li-S batteries with high energy storage

Peter G. Bruce et al.

NATURE MATERIALS (2012)

Add to Collection

Article Chemistry, Multidisciplinary

VESTA 3 for three-dimensional visualization of crystal, volumetric and morphology data

Koichi Momma et al.

JOURNAL OF APPLIED CRYSTALLOGRAPHY (2011)

Add to Collection

Article Chemistry, Physical

Lithium - Air Battery: Promise and Challenges

G. Girishkumar et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2010)

Add to Collection

Article Multidisciplinary Sciences

Building better batteries

M. Armand et al.

NATURE (2008)

Add to Collection

Article Materials Science, Multidisciplinary

A fast and robust algorithm for Bader decomposition of charge density

Graeme Henkelman et al.

COMPUTATIONAL MATERIALS SCIENCE (2006)

Add to Collection

© Peeref 2019-2024. All rights reserved.