4.8 Article

Stable Zn Metal Anodes Enabled by Restricted Self-Diffusion Via Succinimide Surfactant

Related references

Note: Only part of the references are listed.
Article Chemistry, Multidisciplinary

Molecular-Crowding Effect Mimicking Cold-Resistant Plants to Stabilize the Zinc Anode with Wider Service Temperature Range

Huaizheng Ren et al.

Summary: A zwitterionic osmolyte-based molecular crowding electrolyte, achieved by adding betaine to the aqueous electrolyte, is proposed to address the challenges of dendrite growth, low plating/stripping efficiency, and high freezing point in aqueous Zn-ion batteries. The electrolyte effectively restrains side reactions and dendrite growth, enables high reversibility and dendrite-free plating/stripping, and lowers the freezing point for stable operation at low temperatures. This innovative concept injects new vitality into the development of multifunctional aqueous electrolytes.

ADVANCED MATERIALS (2023)

Article Chemistry, Multidisciplinary

Revealing the Two-Dimensional Surface Diffusion Mechanism for Zinc Dendrite Formation on Zinc Anode

Zefang Yang et al.

Summary: A protective copper nitride layer is constructed on the zinc metal anode to inhibit zinc dendrite growth effectively. By restricting the 2D atomic surface diffusion mechanism, stable zinc deposition with enhanced electrochemical stability is achieved.

SMALL (2022)

Article Chemistry, Physical

Engineering zincophilic sites on Zn surface via plant extract additives for dendrite-free Zn anode

Lei Zhang et al.

Summary: Aqueous Zn-ion batteries have the potential for large-scale energy storage due to their safety and cost-effectiveness. The addition of nettle extract helps to guide uniform zinc deposition on the anode, effectively suppressing dendrite growth and improving battery performance over extended cycling. This approach of engineering zincophilic sites through plant extracts opens up new possibilities for dendrite-free zinc anodes.

ENERGY STORAGE MATERIALS (2022)

Article Chemistry, Physical

Elastomer-Alginate Interface for High-Power and High-Energy Zn Metal Anodes

Qun Liu et al.

Summary: In this study, a hybrid interface was designed for zinc-metal batteries, consisting of thermoplastic polyurethane (TPU) fiber matrix and zinc-alginate (ZA) filler. This interface effectively inhibited side reactions, regulated Zn2+ transport, and enabled uniform Zn deposition. The TPU frame acted as a super-elastic constraint to suppress dendrite evolution and accommodate a large amount of deposited Zn. The interface-protected Zn anode exhibited high cycling stability and exceptional cumulative capacity.

ADVANCED ENERGY MATERIALS (2022)

Article Chemistry, Physical

Electrochemical interface reconstruction to eliminate surface heterogeneity for dendrite-free zinc anodes

Zefang Yang et al.

Summary: This study demonstrates that surface heterogeneity mainly affects zinc dendrite formation at low current density, and proposes a method to reconstruct the electrochemical interface to achieve more uniform zinc deposition and dissolution, thereby improving the cycling stability and Coulombic efficiency of zinc anodes.

ENERGY STORAGE MATERIALS (2022)

Article Chemistry, Multidisciplinary

Boosting the Kinetics and Stability of Zn Anodes in Aqueous Electrolytes with Supramolecular Cyclodextrin Additives

Kang Zhao et al.

Summary: This study demonstrates the potential of cyclodextrins (CDs) as electrolyte additives for rechargeable Zn batteries. The addition of alpha-CD improves the stability and kinetics of Zn plating and stripping by adsorbing on the Zn surface and suppressing water-induced side reactions. This finding provides insight into the use of supramolecular macrocycles for enhancing the performance of aqueous battery chemistry.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2022)

Article Chemistry, Multidisciplinary

Engineering a self-adaptive electric double layer on both electrodes for high-performance zinc metal batteries

Yanqun Lv et al.

Summary: This study demonstrates the use of zwitterionic ionic liquids (ZIL) to construct a self-adaptive electric double layer (EDL) in zinc metal batteries, enabling dendrite-free plating/stripping and high zinc utilization. The Zn//NaV3O8 center dot 1.5H(2)O full battery exhibits superfast charging/discharging and high areal capacity.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

Review Chemistry, Physical

Strategies for the Stabilization of Zn Metal Anodes for Zn-Ion Batteries

Zhehan Yi et al.

Summary: Zinc-ion batteries are considered promising candidates for next-generation energy storage systems due to their high safety, resource availability, and environmental friendliness. However, the instability of the Zn metal anode has hindered their reliable deployment, and efforts have been made to overcome this through electrode structure design, interface modification, and electrolyte/separator optimization. Understanding and categorizing these strategies based on their intrinsic mechanisms are important for the development of novel Zn metal anodes for ZIBs.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Physical

Alleviation of Dendrite Formation on Zinc Anodes via Electrolyte Additives

Xiaoxia Guo et al.

Summary: The study found that adding lithium chloride to the electrolyte can effectively suppress the formation of dendrites on the zinc anode, improving the stability and safety of the battery.

ACS ENERGY LETTERS (2021)

Article Chemistry, Multidisciplinary

Fast-Charging and Ultrahigh-Capacity Zinc Metal Anode for High-Performance Aqueous Zinc-Ion Batteries

Penghui Cao et al.

Summary: By utilizing a zinc phosphorus solid solution alloy coated on zinc foil as the anode, the study achieved successful cycling at high current density and large areal capacity, demonstrating the potential for large-scale application of aqueous zinc-ion batteries in high-power devices.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Multidisciplinary

Functionalized Phosphonium Cations Enable Zinc Metal Reversibility in Aqueous Electrolytes

Lin Ma et al.

Summary: This study demonstrates remarkable improvements in zinc reversibility in aqueous electrolytes through the use of phosphonium-based cations, particularly with ligands containing an ether linkage. The unique interphase chemistry from phosphonium and its functionalities are identified as key factors in dictating reversible zinc chemistry, leading to excellent full cell performance with high coulombic efficiency and dendrite-free zinc plating/stripping.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Chemistry, Multidisciplinary

Stable Aqueous Anode-Free Zinc Batteries Enabled by Interfacial Engineering

Yongling An et al.

Summary: Anode-free zinc batteries (AFZBs) have great potential as energy storage systems due to their high energy density, inherent safety, low cost, and simplified fabrication process. However, rapid capacity fading caused by side reactions hinders their practical applications. Aqueous AFZBs enabled by electrolyte engineering with a stable interphase are designed to address these issues. Introducing a multifunctional zinc fluoride (ZnF2) additive into the electrolyte helps to form a stable F-rich interfacial layer, improving cycling performance and longevity of AFZBs.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Multidisciplinary

Design of a Solid Electrolyte Interphase for Aqueous Zn Batteries

Dan Li et al.

Summary: A low-concentration aqueous Zn(OTF)(2)-Zn(NO3)(2) electrolyte was designed to form a robust inorganic ZnF2-Zn-5(CO3)(2)(OH)(6)-organic bilayer SEI, allowing high Coulombic efficiency and energy density. The study achieved a high CE of 99.8% for 200 h in Ti parallel to Zn cells, and a high energy density of 168 Wh kg(-1) with 96.5% retention for 700 cycles in Zn parallel to MnO2 cells with a low Zn/MnO2 capacity ratio of 2:1.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Chemistry, Physical

Realizing wide-temperature Zn metal anodes through concurrent interface stability regulation and solvation structure modulation

Zhen Hou et al.

Summary: The study investigates the challenges of stable cycling of Zn metal anodes under thermal extremes, and proposes the use of oligomer poly(ethylene glycol) dimethyl ether as a competitive-solvent to regulate the Zn metal/electrolyte interface and electrolyte solvation chemistry. The competitive-solvent shifts water-occupied interface into oligomer one through preferential Zn surface adsorption, enabling dendrite-free Zn morphologies and alleviating parasitic reactions, ultimately extending the Zn metal anodes' cyclic lifetime across different temperatures.

ENERGY STORAGE MATERIALS (2021)

Article Nanoscience & Nanotechnology

Fluorinated interphase enables reversible aqueous zinc battery chemistries

Longsheng Cao et al.

Summary: The study introduces an aqueous zinc battery with a solid-electrolyte interphase that enables excellent performance in various tests, demonstrating its potential for practical applications in energy storage.

NATURE NANOTECHNOLOGY (2021)

Article Chemistry, Applied

Suppressing by-product via stratified adsorption effect to assist highly reversible zinc anode in aqueous electrolyte

Miao Zhou et al.

Summary: A new artificial Sc2O3 protective film has been developed to construct a novel interface for Zn anode, inhibiting interfacial side reactions and improving cycling stability and coulombic efficiency. The research demonstrates the importance of rational design of anode materials for developing high-performance Zn anodes with long lifespan and high efficiency.

JOURNAL OF ENERGY CHEMISTRY (2021)

Article Chemistry, Physical

Manipulating Zn anode reactions through salt anion involving hydrogen bonding network in aqueous electrolytes with PEO additive

Mengdie Yan et al.

Summary: The addition of PEO in aqueous electrolytes has been found to improve the cycling stability and Coulombic efficiency of Zn anodes, but the overpotential and long-term stability are significantly influenced by different anions. The choice of salt anions in aqueous electrolytes with PEO additives plays a crucial role in tuning the reaction kinetics and stability of Zn anodes.

NANO ENERGY (2021)

Editorial Material Energy & Fuels

Guided by metal-substrate bonding

Edward Matios et al.

Summary: The development of metallic anodes for high-energy batteries is hindered by dendritic growth issues, but by engineering an interface between metals and substrates, strong chemical bonding can be achieved, leading to uniform deposition and high cycling reversibility in batteries.

NATURE ENERGY (2021)

Article Chemistry, Physical

Elimination of Zinc Dendrites by Graphene Oxide Electrolyte Additive for Zinc-Ion Batteries

Jufni Abdulla et al.

Summary: A hybrid electrolyte with graphene oxide additive has been developed to improve the performance of zinc-ion batteries, leading to enhanced stability and cycle life of zinc electrodes. By optimizing the electrolyte composition, the Coulombic efficiency of the batteries has been significantly improved.

ACS APPLIED ENERGY MATERIALS (2021)

Article Chemistry, Multidisciplinary

Amino Acid-Induced Interface Charge Engineering Enables Highly Reversible Zn Anode

Haotian Lu et al.

Summary: This research presents a new strategy of zinc-electrolyte interface charge engineering induced by amino acid additives, leading to highly reversible zinc plating/stripping with improved stability and uniformity of the zinc metal anode. Long-term stable cycling at high and ultra-high current densities has been demonstrated, highlighting the reliable self-adaptive feature of the zinc-electrolyte interface.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Multidisciplinary

Stabilizing Zinc Anodes by Regulating the Electrical Double Layer with Saccharin Anions

Cong Huang et al.

Summary: The research shows that saccharin (Sac) as an electrolyte additive can regulate the electrical double layer (EDL) structure on the zinc anode, forming a unique solid electrolyte interphase (SEI) that effectively modulates zinc deposition behavior and prevents side reactions, thus improving battery performance.

ADVANCED MATERIALS (2021)

Article Chemistry, Physical

Dual-Function Electrolyte Additive for Highly Reversible Zn Anode

Shao-Jian Zhang et al.

Summary: The study introduces a simple method using ethylene diamine tetraacetic acid tetrasodium salt (Na(4)EDTA) to suppress the poor reversibility of the Zn anode in aqueous Zn-ion batteries, effectively inhibiting dendrite growth and hydrogen evolution. Additionally, the added EDTA promotes desolvation of Zn, prolonging the electrode lifespan.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Physical

Tailoring the Stability and Kinetics of Zn Anodes through Trace Organic Polymer Additives in Dilute Aqueous Electrolyte

Mengdie Yan et al.

Summary: This study demonstrates the improvement of zinc anodes in low-cost aqueous electrolytes by adding polymers of different polarities, resulting in over 1300 hours of operation time and high Coulombic efficiency under 2 mA/cm², 2 mAh/cm² conditions.

ACS ENERGY LETTERS (2021)

Article Chemistry, Physical

Synchronously manipulating Zn2+ transfer and hydrogen/oxygen evolution kinetics in MXene host electrodes toward symmetric Zn-ions micro-supercapacitor with enhanced areal energy density

Zhiqia Cao et al.

Summary: The study presents a strategy to enhance Zn2+ diffusion and suppress hydrogen/oxygen evolution simultaneously within MXene host electrodes for high-energy-density symmetric ZMSCs. The designed MXene/BCF hybrid films effectively reduce Zn2+ diffusion barrier and induce additional pseudocapacitance, resulting in superior areal capacitance in ZMSCs. The use of a doubled voltage window in combination with suppressed kinetics of hydrogen/oxygen evolution leads to a significantly increased areal energy density compared to conventional electrolytes.

ENERGY STORAGE MATERIALS (2021)

Article Materials Science, Multidisciplinary

Turning the Byproduct Zn4(OH)6SO4•xH2O into a Uniform Solid Electrolyte Interphase to Stabilize Aqueous Zn Anode

Wenli Xin et al.

Summary: A simple method was reported to convert the byproduct ZHS into a uniform solid electrolyte interphase by introducing a small amount of Zn(OH)2 into the ZnSO4 electrolyte, significantly restraining dendrite growth and side reactions of Zn anodes. The designed electrolyte conditions enabled both symmetrical and asymmetrical zinc cells to exhibit long lifetime and high Coulombic efficiency, providing new insights for stabilizing aqueous metal anodes.

ACS MATERIALS LETTERS (2021)

Article Chemistry, Multidisciplinary

Bio-inspired design of an in situ multifunctional polymeric solid-electrolyte interphase for Zn metal anode cycling at 30 mA cm-2 and 30 mA h cm-2

Xiaohui Zeng et al.

Summary: Inspired by the bio-adhesion principle, a stable SEI layer of polydopamine was successfully constructed on a Zn anode, offering multifunctional features that regulate Zn nucleation, enhance Zn-ion conductivity, and block interfacial side reactions. This approach significantly improved the performance and stability of rechargeable aqueous zinc-ion batteries.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Chemistry, Multidisciplinary

A Sieve-Functional and Uniform-Porous Kaolin Layer toward Stable Zinc Metal Anode

Canbin Deng et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Chemistry, Multidisciplinary

Directly Grown Vertical Graphene Carpets as Janus Separators toward Stabilized Zn Metal Anodes

Chao Li et al.

ADVANCED MATERIALS (2020)

Review Energy & Fuels

Current status and future directions of multivalent metal-ion batteries

Yanliang Liang et al.

NATURE ENERGY (2020)

Article Chemistry, Multidisciplinary

Stabilizing Zinc Anode Reactions by Polyethylene Oxide Polymer in Mild Aqueous Electrolytes

Yan Jin et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Energy & Fuels

Realizing high zinc reversibility in rechargeable batteries

Lin Ma et al.

NATURE ENERGY (2020)

Article Chemistry, Multidisciplinary

Solvation Structure Design for Aqueous Zn Metal Batteries

Longsheng Cao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

Review Chemistry, Multidisciplinary

Dendrites in Zn-Based Batteries

Qi Yang et al.

ADVANCED MATERIALS (2020)

Review Materials Science, Multidisciplinary

Issues and Future Perspective on Zinc Metal Anode for Rechargeable Aqueous Zinc-ion Batteries

Canpeng Li et al.

ENERGY & ENVIRONMENTAL MATERIALS (2020)

Article Chemistry, Physical

Tailoring desolvation kinetics enables stable zinc metal anodes

Zhen Hou et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Article Chemistry, Multidisciplinary

Manipulating the ion-transfer kinetics and interface stability for high-performance zinc metal anodes

Xuesong Xie et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Review Chemistry, Multidisciplinary

Recent Progress in the Electrolytes of Aqueous Zinc-Ion Batteries

Shuo Huang et al.

CHEMISTRY-A EUROPEAN JOURNAL (2019)

Article Multidisciplinary Sciences

Reversible epitaxial electrodeposition of metals in battery anodes

Jingxu Zheng et al.

SCIENCE (2019)

Article Chemistry, Multidisciplinary

Long-life and deeply rechargeable aqueous Zn anodes enabled by a multifunctional brightener-inspired interphase

Zhiming Zhao et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Review Chemistry, Multidisciplinary

Recent Advances in Zn-Ion Batteries

Ming Song et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Article Multidisciplinary Sciences

Lithium metal stripping beneath the solid electrolyte interphase

Feifei Shi et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2018)

Article Nanoscience & Nanotechnology

Dendrite Suppression Membranes for Rechargeable Zinc Batteries

Byoung-Sun Lee et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Chemistry, Multidisciplinary

Cationic Surfactant-Based Electrolyte Additives for Uniform Lithium Deposition via Lithiophobic Repulsion Mechanisms

Hongliu Dai et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Article Chemistry, Physical

Layered VS2 Nanosheet-Based Aqueous Zn Ion Battery Cathode

Pan He et al.

ADVANCED ENERGY MATERIALS (2017)

Article Environmental Sciences

Adsorption capacities of poly-γ-glutamic acid and its sodium salt for cesium removal from radioactive wastewaters

Shigeki Sakamoto et al.

JOURNAL OF ENVIRONMENTAL RADIOACTIVITY (2016)

Article Electrochemistry

Determination of the morphology factor of oxide layers

LM Da Silva et al.

ELECTROCHIMICA ACTA (2001)

Article Chemistry, Physical

FTIR studies of 3-bromomultiflorine complexation by succinimide in solution

W Wysocka et al.

JOURNAL OF MOLECULAR STRUCTURE (2000)