Related references
Note: Only part of the references are listed.Synthesis and evaluation of novel aromatic acrylic monomers for optically clear adhesive with high refractive index
Roghayeh Khaleghi Qusheh Bolagh et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2023)
Three-Dimensional Nanolithography with Visible Continuous Wave Laser through Triplet Up-Conversion
Zhijun Luo et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2023)
Low-Divergence hBN Single-Photon Source with a 3D-Printed Low- Fluorescence Elliptical Polymer Microlens
Johann A. Preuss et al.
NANO LETTERS (2023)
Experimental observation of Berry phases in optical Mobius-strip microcavities
Jiawei Wang et al.
NATURE PHOTONICS (2023)
Double-sided femtosecond 3D printing technology based on a specific mask
Mingyue Tan et al.
OPTICS AND LASERS IN ENGINEERING (2023)
Improved two-photon polymerization through an optical fiber using coherent beam shaping
Georgia Konstantinou et al.
OPTICS AND LASERS IN ENGINEERING (2023)
Adjustment-free two-sided 3D direct laser writing for aligned micro-optics on both substrate sides
Michael Schmid et al.
OPTICS LETTERS (2023)
Micro-Optics 3D Printed via Multi-Photon Laser Lithography
Diana Gonzalez-Hernandez et al.
ADVANCED OPTICAL MATERIALS (2023)
Challenges and Opportunities in 3D Laser Printing Based on (1+1)-Photon Absorption
Vincent Hahn et al.
ACS PHOTONICS (2023)
3D nanopolymerization and damage threshold dependence on laser wavelength and pulse duration
Danielius Samsonas et al.
NANOPHOTONICS (2023)
Two-Photon Polymerization: Fundamentals, Materials, and Chemical Modification Strategies
Sean O'Halloran et al.
ADVANCED SCIENCE (2023)
Humidity-Responsive RGB-Pixels via Swelling of 3D Nanoimprinted Polyvinyl Alcohol
Byoungsu Ko et al.
ADVANCED SCIENCE (2023)
Simultaneous synthesis and integration of nanoscale silicon by three-photon laser direct writing
Kai Li et al.
NANOSCALE ADVANCES (2023)
Concurrent Optimization of Diffraction Fields from Binary Phase Mask for Three-Dimensional Nanopatterning
Chihun Lee et al.
ACS PHOTONICS (2023)
Robust Helical Dichroism on Microadditively Manufactured Copper Helices via Photonic Orbital Angular Momentum
Nianwei Dai et al.
ACS NANO (2023)
Utilizing the Sensitization Effect for Direct Laser Writing in a Novel Photoresist Based on the Chitin Monomer N-acetyl-D-glucosamine
Dominic T. Meiers et al.
ADVANCED ENGINEERING MATERIALS (2023)
3D Printing of Resilin in Water by Multiphoton Absorption Polymerization
Doron Kam et al.
ADVANCED FUNCTIONAL MATERIALS (2023)
3D Laser Nanoprinting of Functional Materials
Shao-Feng Liu et al.
ADVANCED FUNCTIONAL MATERIALS (2023)
Femtosecond Laser 4D Printing of Light-Driven Intelligent Micromachines
Chunsan Deng et al.
ADVANCED FUNCTIONAL MATERIALS (2023)
Search for Alternative Two-Step-Absorption Photoinitiators for 3D Laser Nanoprinting
N. Maximilian Bojanowski et al.
ADVANCED FUNCTIONAL MATERIALS (2023)
Printing on Particles: Combining Two-Photon Nanolithography and Capillary Assembly to Fabricate Multimaterial Microstructures
Steven van Kesteren et al.
ADVANCED MATERIALS (2023)
Mechanically robust pyrolyzed carbon produced by two photon polymerization
Peter Serles et al.
CARBON (2023)
Rapid Fabrication of 3D Chiral Microstructures by Single Exposure of Interfered Femtosecond Vortex Beams and Capillary-Force-Assisted Self-Assembly
Deng Pan et al.
ADVANCED FUNCTIONAL MATERIALS (2022)
4D Printing of Shape Memory Polymers: From Macro to Micro
Christoph A. Spiegel et al.
ADVANCED FUNCTIONAL MATERIALS (2022)
Replicating the Cynandra opis Butterfly's Structural Color for Bioinspired Bigrating Color Filters
Xiaobao Cao et al.
ADVANCED MATERIALS (2022)
Two-Photon 3D Laser Printing Inside Synthetic Cells
Tobias Abele et al.
ADVANCED MATERIALS (2022)
Reconfiguring Colors of Single Relief Structures by Directional Stretching
Qifeng Ruan et al.
ADVANCED MATERIALS (2022)
3D Printed, Solid-State Conductive Ionoelastomer as a Generic Building Block for Tactile Applications
Chao Zhang et al.
ADVANCED MATERIALS (2022)
Volumetric Bioprinting of Organoids and Optically Tuned Hydrogels to Build Liver-Like Metabolic Biofactories
Paulina Nunez Bernal et al.
ADVANCED MATERIALS (2022)
Structuring light using solgel hybrid 3D-printed optics prepared by two-photon polymerization
Shlomi Lightman et al.
APPLIED OPTICS (2022)
Origination of free-form micro-optical elements using one- and two-photon grayscale laser lithography
Bernhard Lamprecht et al.
APPLIED OPTICS (2022)
Perspective of fibre-optical microendoscopy with microlenses
Baokai Wang et al.
JOURNAL OF MICROSCOPY (2022)
Tetramethacrylic benzylidene cyclopentanone dye for one- and two-photon photopolymerization
Elnara R. Zhiganshina et al.
EUROPEAN POLYMER JOURNAL (2022)
3D Sub-Diffraction Printing by Multicolor Photoinhibition Lithography: From Optics to Chemistry
Minfei He et al.
LASER & PHOTONICS REVIEWS (2022)
Two-photon polymerization simulation and fabrication of 3D microprinted suspended waveguides for on-chip optical interconnects
Ricardo M. R. Adao et al.
OPTICS EXPRESS (2022)
Photonic waveguide bundles using 3D laser writing and deep neural network image reconstruction
Giulia Panusa et al.
OPTICS EXPRESS (2022)
Geometric control of next-nearest-neighbor coupling in evanescently coupled dielectric waveguides
J. Schulz et al.
OPTICS EXPRESS (2022)
Direct-laser writing for subnanometer focusing and single-molecule imaging
Simao Coelho et al.
NATURE COMMUNICATIONS (2022)
Maximizing transmittance in two-photon 3D printed materials for micro-optics in the visible
Mehedy Hasan et al.
OPTICAL MATERIALS EXPRESS (2022)
A Miniaturized Imaging Window to Quantify Intravital Tissue Regeneration within a 3D Microscaffold in Longitudinal Studies
Claudio Conci et al.
ADVANCED OPTICAL MATERIALS (2022)
Coupling of molecular vibration and metasurface modes for efficient mid-infrared emission
Yoshiaki Nishijima et al.
JOURNAL OF MATERIALS CHEMISTRY C (2022)
Nanoscale mapping of optically inaccessible bound-states-in-the-continuum
Zhaogang Dong et al.
LIGHT-SCIENCE & APPLICATIONS (2022)
Overview of 3D-Printed Silica Glass
Han Zhang et al.
MICROMACHINES (2022)
Single-Photon Emission from Individual Nanophotonic-Integrated Colloidal Quantum Dots
Alexander Eich et al.
ACS PHOTONICS (2022)
Toward 3D-Printed Inverse-Designed Metaoptics
Charles Roques-Carmes et al.
ACS PHOTONICS (2022)
High-Resolution 3D Printing for Electronics
Young-Geun Park et al.
ADVANCED SCIENCE (2022)
Multi-Photon 4D Printing of Complex Liquid Crystalline Microstructures by In Situ Alignment Using Electric Fields
Alexander Muenchinger et al.
ADVANCED MATERIALS TECHNOLOGIES (2022)
Understanding and overcoming proximity effects in multi-spot two-photon direct laser writing
Caroline Arnoux et al.
ADDITIVE MANUFACTURING (2022)
Roadmap on topological photonics
Hannah Price et al.
JOURNAL OF PHYSICS-PHOTONICS (2022)
High-Order Photonic Cavity Modes Enabled 3D Structural Colors
Hailong Liu et al.
ACS NANO (2022)
Customizable and highly sensitive 3D micro-springs produced by two-photon polymerizations with improved post-treatment processes
Xinggang Shang et al.
APPLIED PHYSICS LETTERS (2022)
Two-Photon Laser Lithography of Active Microcavity Structures
A. Maydykovskiy et al.
JETP LETTERS (2022)
Replicating 3D printed structures into functional materials
Qiaoyi Wang et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2022)
Triplet-Triplet Annihilation Photopolymerization for High-Resolution 3D Printing
David K. Limberg et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2022)
Microscale white light emitters fabricated by two-photon polymerization lithography on functional resist
Guilherme Osvaldo Dias et al.
MICROELECTRONIC ENGINEERING (2022)
Three-Dimensional Plasmonic Nanocluster-Driven Light-Matter Interaction for Photoluminescence Enhancement and Picomolar-Level Biosensing
Won-Geun Kim et al.
NANO LETTERS (2022)
Triplet fusion upconversion nanocapsules for volumetric 3D printing
Samuel N. Sanders et al.
NATURE (2022)
Non-Abelian braiding on photonic chips
Xu-Lin Zhang et al.
NATURE PHOTONICS (2022)
An open source three-mirror laser scanning holographic two-photon lithography system
Marco Pisanello et al.
PLOS ONE (2022)
Volumetric additive manufacturing of silica glass with microscale computed axial lithography
Joseph T. Toombs et al.
SCIENCE (2022)
3D-Printed Micro Lens-in-Lens for In Vivo Multimodal Microendoscopy
Jiawen Li et al.
SMALL (2022)
Two-Photon 3D Printing in Metal-Organic Framework Single Crystals
Yusheng Zhang et al.
SMALL (2022)
λ/30 inorganic features achieved by multi-photon 3D lithography
Feng Jin et al.
NATURE COMMUNICATIONS (2022)
Additive Manufacturing of 3D Luminescent ZrO2:Eu3+ Architectures
Jedrzej Winczewski et al.
ADVANCED OPTICAL MATERIALS (2022)
Controlling Light in Scattering Materials for Volumetric Additive Manufacturing
Jorge Madrid-Wolff et al.
ADVANCED SCIENCE (2022)
High-Precision Printing of Complex Glass Imaging Optics with Precondensed Liquid Silica Resin
Zhihan Hong et al.
ADVANCED SCIENCE (2022)
Additive manufacturing for the development of optical/photonic systems and components
Gregory Berglund et al.
OPTICA (2022)
3D printing of optical materials by processes based on photopolymerization: materials, technologies, and recent advances
Emma Geisler et al.
PHOTONICS RESEARCH (2022)
The influence of printing parameters on multi-material two-photon polymerisation based micro additive manufacturing
Qin Hu et al.
ADDITIVE MANUFACTURING (2022)
Two-Photon Laser Microprinting of Highly Ordered Nanoporous Materials Based on Hexagonal Columnar Liquid Crystals
Joeel Monti et al.
ACS APPLIED MATERIALS & INTERFACES (2022)
Dip-In Photoresist for Photoinhibited Two-Photon Lithography to Realize High-Precision Direct Laser Writing on Wafer
Chun Cao et al.
ACS APPLIED MATERIALS & INTERFACES (2022)
Stiff Shape Memory Polymers for High-Resolution Reconfigurable Nanophotonics
Wang Zhang et al.
NANO LETTERS (2022)
3D Printed Microstructures Erasable by Darkness
Steven C. Gauci et al.
ADVANCED FUNCTIONAL MATERIALS (2022)
Visible-Light-Degradable 3D Microstructures in Aqueous Environments
Marvin Gernhardt et al.
ADVANCED MATERIALS (2022)
Multiphoton Lithography of Organic Semiconductor Devices for 3D Printing of Flexible Electronic Circuits, Biosensors, and Bioelectronics
Omid Dadras-Toussi et al.
ADVANCED MATERIALS (2022)
Generation of mid-infrared vortex beams by 3-D printed polymer phase plates
Junchao Zhou et al.
OPTICS AND LASER TECHNOLOGY (2022)
Synthesis and application of triphenylamine-based aldehydes as photo-initiators for multi-photon lithography
D. Ladika et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2022)
Three-dimensional nanofabrication via ultrafast laser patterning and kinetically regulated material assembly
Fei Han et al.
SCIENCE (2022)
4D printing of shape-changing structures based on IPN epoxy composites formed by UV post-curing and ?-ray radiation
Linlin Wang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)
Electro-active metaobjective from metalenses-on-demand
Julian Karst et al.
NATURE COMMUNICATIONS (2022)
Direct retrieval of Zernike-based pupil functions using integrated diffractive deep neural networks
Elena Goi et al.
NATURE COMMUNICATIONS (2022)
Plasmonic bound states in the continuum to tailor light-matter coupling
Andreas Aigner et al.
SCIENCE ADVANCES (2022)
Functional Shape-Morphing Microarchitectures Fabricated by Dynamic Holographically Shifted Femtosecond Multifoci
Leran Zhang et al.
NANO LETTERS (2022)
Characterization of two-photon photopolymerization fabrication using high-speed optical diffraction tomography
Yanping He et al.
ADDITIVE MANUFACTURING (2022)
Modeling of two-photon polymerization in the strong-pulse regime
Mingman Sun et al.
ADDITIVE MANUFACTURING (2022)
3D-printed facet-attached optical elements for beam shaping in optical phased arrays
Stefan Singer et al.
OPTICS EXPRESS (2022)
Towards efficient structure prediction and pre-compensation in multi-photon lithography
Nicolas Lang et al.
OPTICS EXPRESS (2022)
Smart grating coupled whispering-gallery-mode microcavity on tip of multicore optical fiber with response enhancement
Feiyang Hou et al.
OPTICS EXPRESS (2022)
Rapid aberration correction for diffractive X-ray optics by additive manufacturing
Frank Seiboth et al.
OPTICS EXPRESS (2022)
Far-field lithography through saturated resonance energy transfer
Nikolaos Liaros
OPTICS LETTERS (2022)
3D-Printed Mobius Microring Lasers: Topology Engineering in Photonic Microstructures
Xianqing Lin et al.
SMALL (2022)
3D printing colloidal crystal microstructures via sacrificial-scaffold-mediated two-photon lithography
Keliang Liu et al.
NATURE COMMUNICATIONS (2022)
An achromatic metafiber for focusing and imaging across the entire telecommunication range
Haoran Ren et al.
NATURE COMMUNICATIONS (2022)
Femtosecond laser dentistry for precise and efficient cavity preparation in teeth
Ludovic Rapp et al.
BIOMEDICAL OPTICS EXPRESS (2022)
Modified photoresins with tunable refractive index for 3D printed micro-optics
R. S. Ketchum et al.
OPTICAL MATERIALS EXPRESS (2022)
High resolution femtosecond direct laser writing with wrapped lens
Andrea Toulouse et al.
OPTICAL MATERIALS EXPRESS (2022)
3D optomechanical metamaterials
Alexander Muenchinger et al.
MATERIALS TODAY (2022)
Full Geometric Control of Hidden Color Information in Diffraction Gratings under Angled White Light Illumination
John You En Chan et al.
NANO LETTERS (2022)
Direct Observation of Spin-Orbit Interaction of Light via Chiroptical Responses
Jincheng Ni et al.
NANO LETTERS (2022)
Light-sheet 3D microprinting via two-colour two-step absorption
Vincent Hahn et al.
NATURE PHOTONICS (2022)
Vortex-Bessel beam generation by 3D direct printing of an integrated multi-optical element on a fiber tip
Shlomi Lightman et al.
OPTICS LETTERS (2022)
Generation of Bessel beams via femtosecond direct laser writing 3D phase plates
Jue Wang et al.
OPTICS LETTERS (2022)
3D nanoprinting of semiconductor quantum dots by photoexcitation-induced chemical bonding
Shao-Feng Liu et al.
SCIENCE (2022)
Miniature optoelectronic compound eye camera
Zhi-Yong Hu et al.
NATURE COMMUNICATIONS (2022)
Superconducting Single-Photon Spectrometer with 3D-Printed Photonic-Crystal Filters
You Xiao et al.
ACS PHOTONICS (2022)
3D-Nanoprinted Antiresonant Hollow-Core Microgap Waveguide: An on-Chip Platform for Integrated Photonic Devices and Sensors
Johannes Buerger et al.
ACS PHOTONICS (2022)
XCT and DLW: Synergies of Two Techniques at Sub-Micrometer Resolution
Sven Fritzsche et al.
APPLIED SCIENCES-BASEL (2022)
4D printing of shape memory polymer composites: A review on fabrication techniques, applications, and future perspectives
Muhammad Yasir Khalid et al.
JOURNAL OF MANUFACTURING PROCESSES (2022)
Emerging techniques for customized fabrication of glass
Xiaofeng Liu et al.
Journal of Non-Crystalline Solids: X (2022)
3D Direct Laser Writing of Highly Absorptive Photoresist for Miniature Optical Apertures
Michael D. Schmid et al.
ADVANCED FUNCTIONAL MATERIALS (2022)
Femtosecond aser direct writing 3D micro/nano-lithography using VIS-light oscillator
Antanas Butkus et al.
JOURNAL OF CENTRAL SOUTH UNIVERSITY (2022)
Characterization of two-photon-polymerization lithography structures via Raman spectroscopy and nanoindentation
Severin Schweiger et al.
JOURNAL OF OPTICAL MICROSYSTEMS (2022)
Two-photon polymerization as a potential manufacturing tool for biomimetic engineering of complex structures found in nature
Gordon Zyla et al.
JOURNAL OF OPTICAL MICROSYSTEMS (2022)
Beyond Lambertian light trapping for large-area silicon solar cells: fabrication methods
Jovan Maksimovic et al.
OPTO-ELECTRONIC ADVANCES (2022)
Laser additive manufacturing of Si/ZrO2 tunable crystalline phase 3D nanostructures
Greta Merkininkaite et al.
OPTO-ELECTRONIC ADVANCES (2022)
Combining one and two photon polymerization for accelerated high performance (3+1)D photonic integration
Adria Grabulosa et al.
NANOPHOTONICS (2022)
Temperature-Responsive 4D Liquid Crystal Microactuators Fabricated by Direct Laser Writing by Two-Photon Polymerization
Marc del Pozo et al.
SMALL STRUCTURES (2022)
Nanophotonic Structural Colors
Soroosh Daqiqeh Rezaei et al.
ACS PHOTONICS (2021)
3D-Printedhigh-NAcatadioptric thin lens for suppression ofXPMbackground in Stimulated Raman Scattering microscopy
Andrea Bertoncini et al.
JOURNAL OF BIOPHOTONICS (2021)
Three-Dimensional Photoluminescent Crypto-Images Doped with (CdSe)ZnS Quantum Dots by One-Photon and Two-Photon Polymerization
Tiziana Ritacco et al.
ACS APPLIED NANO MATERIALS (2021)
Two-photon lithography of fluorescence-encoded quick-read micro-code for anti-counterfeiting applications
Arun Jaiswal et al.
JOURNAL OF PHYSICS-PHOTONICS (2021)
Design and two-photon direct laser writing of low-loss waveguides, tapers and S-bends
Tigran Baghdasaryan et al.
JOURNAL OF PHYSICS-PHOTONICS (2021)
Wide-Gamut Biomimetic Structural Colors from Interference-Assisted Two-Photon Polymerization
Hongcheng Gu et al.
ACS APPLIED MATERIALS & INTERFACES (2021)
Printable Nanocomposite Metalens for High-Contrast Near-Infrared Imaging
Gwanho Yoon et al.
ACS NANO (2021)
Two-Photon Laser-Written Photoalignment Layers for Patterning Liquid Crystalline Conjugated Polymer Orientation
Yuping Shi et al.
ADVANCED FUNCTIONAL MATERIALS (2021)
Stimuli Responsive Shape Memory Microarchitectures
Luizetta Elliott et al.
ADVANCED FUNCTIONAL MATERIALS (2021)
3D Printed Flexible Strain Sensors: From Printing to Devices and Signals
Haodong Liu et al.
ADVANCED MATERIALS (2021)
Two-Photon Polymerization of Nanocomposites for the Fabrication of Transparent Fused Silica Glass Microstructures
Frederik Kotz et al.
ADVANCED MATERIALS (2021)
3D printing for polymer/particle-based processing: A review
Weiheng Xu et al.
COMPOSITES PART B-ENGINEERING (2021)
Full-Stokes Polarization Perfect Absorption with Diatomic Metasurfaces
Yao Liang et al.
NANO LETTERS (2021)
Parallel convolutional processing using an integrated photonic tensor core
J. Feldmann et al.
NATURE (2021)
3D high precision laser printing of a flat nanofocalizer for subwavelength light spot array
Meiling Jiang et al.
OPTICS LETTERS (2021)
Structural multi-colour invisible inks with submicron 4D printing of shape memory polymers
Wang Zhang et al.
NATURE COMMUNICATIONS (2021)
Effect of pyrolysis on microstructures made of various photoresists by two-photon polymerization: comparative study
M. I. Sharipova et al.
OPTICAL MATERIALS EXPRESS (2021)
Metasurface Optical Characterization Using Quadriwave Lateral Shearing Interferometry
Samira Khadir et al.
ACS PHOTONICS (2021)
Polymerization mechanisms initiated by spatio-temporally confined light
Edvinas Skliutas et al.
NANOPHOTONICS (2021)
3D printing of highly stretchable hydrogel with diverse UV curable polymers
Qi Ge et al.
SCIENCE ADVANCES (2021)
3D Printing and Nanotechnology: A Multiscale Alliance in Personalized Medicine
Juliana dos Santos et al.
ADVANCED FUNCTIONAL MATERIALS (2021)
Two-photon lithography of subwavelength plasmonic microstructures in metal-polymer composite resin
Arun Jaiswal et al.
MATERIALS LETTERS (2021)
Influence of photoinitiator and temperature on photocross-linking kinetics of acrylated epoxidized soybean oil and properties of the resulting polymers
Migle Lebedevaite et al.
INDUSTRIAL CROPS AND PRODUCTS (2021)
Hierarchical Colorful Structures by Three-Dimensional Printing of Inverse Opals
Hemant Kumar Raut et al.
NANO LETTERS (2021)
3D-printed silica with nanoscale resolution
Xiewen Wen et al.
NATURE MATERIALS (2021)
Two-step absorption instead of two-photon absorption in 3D nanoprinting
Vincent Hahn et al.
NATURE PHOTONICS (2021)
Two-photon lithography for three-dimensional fabrication in micro/ nanoscale regime: A comprehensive review
V. Harinarayana et al.
OPTICS AND LASER TECHNOLOGY (2021)
Mobius Strip Microlasers: A Testbed for Non-Euclidean Photonics
Yalei Song et al.
PHYSICAL REVIEW LETTERS (2021)
A Review of Vat Photopolymerization Technology: Materials, Applications, Challenges, and Future Trends of 3D Printing
Marek Pagac et al.
POLYMERS (2021)
Biomimetic apposition compound eye fabricated using microfluidic-assisted 3D printing
Bo Dai et al.
NATURE COMMUNICATIONS (2021)
Shape-programmable liquid crystal elastomer structures with arbitrary three-dimensional director fields and geometries
Yubing Guo et al.
NATURE COMMUNICATIONS (2021)
Leveraging on ENZ Metamaterials to Achieve 2D and 3D Hyper-Resolution in Two-Photon Direct Laser Writing
Giuseppe Emanuele Lio et al.
ADVANCED MATERIALS (2021)
Mechanically Robust and UV-Curable Shape-Memory Polymers for Digital Light Processing Based 4D Printing
Biao Zhang et al.
ADVANCED MATERIALS (2021)
Birefringent optical retarders from laser 3D-printed dielectric metasurfaces
Simonas Varapnickas et al.
APPLIED PHYSICS LETTERS (2021)
Rapid, continuous projection multi-photon 3D printing enabled by spatiotemporal focusing of femtosecond pulses
Paul Somers et al.
LIGHT-SCIENCE & APPLICATIONS (2021)
Probing Plasmon-Induced Chemical Mechanisms by Free-Radical Nanophotopolymerization
Farid Kameche et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2021)
Three-dimensional nanoprinting via charged aerosol jets
Wooik Jung et al.
NATURE (2021)
Laser 3D Printing of Inorganic Free-Form Micro-Optics
Diana Gonzalez-Hernandez et al.
PHOTONICS (2021)
Refractive index change measurement by quantitative microscopy phase imaging for femtosecond laser written structures
Alain Abou Khalil et al.
OPTICS COMMUNICATIONS (2021)
3D printed hybrid refractive/diffractive achromat and apochromat for the visible wavelength range
Michael Schmid et al.
OPTICS LETTERS (2021)
3D and 4D lithography of untethered microrobots
Fatemeh Rajabasadi et al.
PROGRESS IN MATERIALS SCIENCE (2021)
Vegetable Oil-Based Thiol-Ene/Thiol-Epoxy Resins for Laser Direct Writing 3D Micro-/Nano-Lithography
Sigita Grauzeliene et al.
POLYMERS (2021)
Ultrahigh numerical aperture meta-fibre for flexible optical trapping
Malte Plidschun et al.
LIGHT-SCIENCE & APPLICATIONS (2021)
Optical Fireworks Based on Multifocal Three-Dimensional Color Prints
Hongtao Wang et al.
ACS NANO (2021)
Nature-inspired materials and structures using 3D Printing
Amit Bandyopadhyay et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2021)
Full Color and Grayscale Painting with 3D Printed Low-Index Nanopillars
Hao Wang et al.
NANO LETTERS (2021)
Hybrid anisotropic plasmonic metasurfaces with multiple resonances of focused light beams
Yao Liang et al.
NANO LETTERS (2021)
Effect of temperature on the SU-8 photoresist filling behavior during thermal nanoimprinting
Lei Sun et al.
POLYMER ENGINEERING AND SCIENCE (2021)
Ultralow-threshold laser using super-bound states in the continuum
Min-Soo Hwang et al.
NATURE COMMUNICATIONS (2021)
High-resolution light field prints by nanoscale 3D printing
John You En Chan et al.
NATURE COMMUNICATIONS (2021)
Review on Experimental and Theoretical Investigations of Ultra-Short Pulsed Laser Ablation of Metals with Burst Pulses
Daniel J. Foerster et al.
MATERIALS (2021)
Refractive index and dispersion of transparent 3D printing photoresins
Mateo Reynoso et al.
OPTICAL MATERIALS EXPRESS (2021)
Two-Photon Polymerization: Functionalized Microstructures, Micro-Resonators, and Bio-Scaffolds
Adriano J. G. Otuka et al.
POLYMERS (2021)
High laser induced damage threshold photoresists for nano-imprint and 3D multi-photon lithography
Elmina Kabouraki et al.
NANOPHOTONICS (2021)
3D Printing of Multilayered and Multimaterial Electronics: A Review
Guo Liang Goh et al.
ADVANCED ELECTRONIC MATERIALS (2021)
Neuron-Inspired Steiner Tree Networks for 3D Low-Density Metastructures
Haoyi Yu et al.
ADVANCED SCIENCE (2021)
Direct (3+1)D laser writing of graded-index optical elements
Xavier Porte et al.
OPTICA (2021)
Topological photonics in 3D micro-printed systems
Julian Schulz et al.
APL PHOTONICS (2021)
Topological Photonics on a Small Scale
Dmitry V. Zhirihin et al.
SMALL SCIENCE (2021)
Direct laser writing of vapour-responsive photonic arrays
Colm Delaney et al.
JOURNAL OF MATERIALS CHEMISTRY C (2021)
Tight-binding model in optical waveguides: Design principle and transferability for simulation of complex photonics networks
Yang Chen et al.
PHYSICAL REVIEW A (2021)
Light-Powered Microrobots: Challenges and Opportunities for Hard and Soft Responsive Microswimmers
Ada-Ioana Bunea et al.
ADVANCED INTELLIGENT SYSTEMS (2021)
4D Printing: Enabling Technology for Microrobotics Applications
Georges Adam et al.
ADVANCED INTELLIGENT SYSTEMS (2021)
Recent advances in 3D printing of nanocellulose: structure, preparation, and application prospects
Liang Ying Ee et al.
NANOSCALE ADVANCES (2021)
3D printing of functional microrobots
Jinhua Li et al.
CHEMICAL SOCIETY REVIEWS (2021)
Controlled Microstructural Architectures Based on Smart Fabrication Strategies
Haibo Ding et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Four-dimensional direct laser writing of reconfigurable compound micromachines
Dongdong Jin et al.
MATERIALS TODAY (2020)
Thermal Transport in 3D Nanostructures
Haifei Zhan et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Design, Fabrication, and Mechanics of 3D Micro-/Nanolattices
Xuan Zhang et al.
SMALL (2020)
Photocross-linked polymers based on plant-derived monomers for potential application in optical 3D printing
Migle Lebedevaite et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2020)
Three-dimensional printing of multicomponent glasses using phase-separating resins
David G. Moore et al.
NATURE MATERIALS (2020)
Highly Efficient Dual-Fiber Optical Trapping with 3D Printed Diffractive Fresnel Lenses
Asa Asadollahbaik et al.
ACS PHOTONICS (2020)
Additive manufacturing by template-assisted 3D electrodeposition: Nanocrystalline nickel microsprings and microspring arrays
Patrik Schurch et al.
APPLIED MATERIALS TODAY (2020)
4D Printing of a Light-Driven Soft Actuator with Programmed Printing Density
Akihiro Nishiguchi et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Magnetic Shape Memory Polymers with Integrated Multifunctional Shape Manipulation
Qiji Ze et al.
ADVANCED MATERIALS (2020)
Nanomaterial Patterning in 3D Printing
Brian Elder et al.
ADVANCED MATERIALS (2020)
Designing with Light: Advanced 2D, 3D, and 4D Materials
Kenward Jung et al.
ADVANCED MATERIALS (2020)
Smart Origination and Functional Replication: Thermal Reflow and Innovative 3D Structures
Robert Kirchner et al.
JOURNAL OF PHOTOPOLYMER SCIENCE AND TECHNOLOGY (2020)
Orbital angular momentum holography for high-security encryption
Xinyuan Fang et al.
NATURE PHOTONICS (2020)
3D holographic light shaping for advanced multiphoton polymerization
Maria Manousidaki et al.
OPTICS LETTERS (2020)
Optical damage thresholds of microstructures made by laser three-dimensional nanolithography
Agne Butkute et al.
OPTICS LETTERS (2020)
Subwavelength dielectric resonators for nonlinear nanophotonics
Kirill Koshelev et al.
SCIENCE (2020)
3D-Printed Scanning-Probe Microscopes with Integrated Optical Actuation and Read-Out
Philipp-Immanuel Dietrich et al.
SMALL (2020)
High-resolution tomographic volumetric additive manufacturing
Damien Loterie et al.
NATURE COMMUNICATIONS (2020)
Coherent remote control of quantum emitters embedded in polymer waveguides
Alexander Landowski et al.
APL PHOTONICS (2020)
Stimuli-Responsive Actuator Fabricated by Dynamic Asymmetric Femtosecond Bessel Beam for In Situ Particle and Cell Manipulation
Rui Li et al.
ACS NANO (2020)
A Review of 3D Printing Technologies for Soft Polymer Materials
Lu-Yu Zhou et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
3D Printing of Micrometer-Sized Transparent Ceramics with On-Demand Optical-Gain Properties
Ido Cooperstein et al.
ADVANCED MATERIALS (2020)
Self-Powered Humidity Sensor Using Chitosan-Based Plasmonic Metal-Hydrogel-Metal Filters
Jaehyuck Jang et al.
ADVANCED OPTICAL MATERIALS (2020)
Biologically inspired ultrathin arrayed camera for high-contrast and high-resolution imaging
Kisoo Kim et al.
LIGHT-SCIENCE & APPLICATIONS (2020)
Focused Electron Beam-Based 3D Nanoprinting for Scanning Probe Microscopy: A Review
Harald Plank et al.
MICROMACHINES (2020)
Rapid Fabrication of Continuous Surface Fresnel Microlens Array by Femtosecond Laser Focal Field Engineering
Linyu Yan et al.
MICROMACHINES (2020)
Three-Dimensional Printing of Pure Proteinaceous Microstructures by Femtosecond Laser Multiphoton Cross-Linking
Daniela Serien et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2020)
Launching a new dimension with 3D magnetic nanostructures
Peter Fischer et al.
APL MATERIALS (2020)
3D printing of conducting polymers
Hyunwoo Yuk et al.
NATURE COMMUNICATIONS (2020)
Single-step manufacturing of hierarchical dielectric metalens in the visible
Gwanho Yoon et al.
NATURE COMMUNICATIONS (2020)
Multi-beam two-photon polymerization for fast large area 3D periodic structure fabrication for bioapplications
Christian Maibohm et al.
SCIENTIFIC REPORTS (2020)
Microscale Polarization Color Pixels from Liquid Crystal Elastomers
Yubing Guo et al.
ADVANCED OPTICAL MATERIALS (2020)
Kirigami/origami: unfolding the new regime of advanced 3D microfabrication/nanofabrication with folding
Shanshan Chen et al.
LIGHT-SCIENCE & APPLICATIONS (2020)
O-FIB: far-field-induced near-field breakdown for direct nanowriting in an atmospheric environment
Zhen-Ze Li et al.
LIGHT-SCIENCE & APPLICATIONS (2020)
Hybrid multi-chip assembly of optical communication engines by in situ 3D nano-lithography
Matthias Blaicher et al.
LIGHT-SCIENCE & APPLICATIONS (2020)
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Jinhua Li et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2020)
Additive Manufacturing of High-Refractive-Index, Nanoarchitected Titanium Dioxide for 3D Dielectric Photonic Crystals
Andrey Vyatskikh et al.
NANO LETTERS (2020)
Bound States in the Continuum in Anisotropic Plasmonic Metasurfaces
Yao Liang et al.
NANO LETTERS (2020)
Optical tentacle of suspended polymer micro-rings on a multicore fiber facet for vapor sensing
Qiaoqiao Liu et al.
OPTICS EXPRESS (2020)
3D-Printed Quantum Dot Nanopixels
Jongcheon Bae et al.
ACS NANO (2020)
Direct Laser Writing of Four-Dimensional Structural Color Microactuators Using a Photonic Photoresist
Marc del Pozo et al.
ACS NANO (2020)
Toward Near-Perfect Diffractive Optical Elements via Nanoscale 3D Printing
Hao Wang et al.
ACS NANO (2020)
3D Microstructures of Liquid Crystal Networks with Programmed Voxelated Director Fields
Yubing Guo et al.
ADVANCED MATERIALS (2020)
3D Two-Photon Microprinting of Nanoporous Architectures
Frederik Mayer et al.
ADVANCED MATERIALS (2020)
High-Resolution 3D Printed Photonic Waveguide Devices
Hongwei Gao et al.
ADVANCED OPTICAL MATERIALS (2020)
Ultrathin monolithic 3D printed optical coherence tomography endoscopy for preclinical and clinical use
Jiawen Li et al.
LIGHT-SCIENCE & APPLICATIONS (2020)
Recent advances in 2D, 3D and higher-order topological photonics
Minkyung Kim et al.
LIGHT-SCIENCE & APPLICATIONS (2020)
A material odyssey for 3D nano/microstructures: two photon polymerization based nanolithography in bioapplications
Caizhi Liao et al.
APPLIED MATERIALS TODAY (2020)
Super-Resolution Imaging with Direct Laser Writing-Printed Microstructures
Bintao Du et al.
JOURNAL OF PHYSICAL CHEMISTRY A (2020)
Plasmon-triggered living photopolymerization for elaboration of hybrid polymer/metal nanoparticles
Farid Kameche et al.
MATERIALS TODAY (2020)
Smart polymers and nanocomposites for 3D and 4D printing
Mojtaba Falahati et al.
MATERIALS TODAY (2020)
Quasi-BIC Resonant Enhancement of Second-Harmonic Generation in WS2 Monolayers
Nils Bernhardt et al.
NANO LETTERS (2020)
Thermal post-curing as an efficient strategy to eliminate process parameter sensitivity in the mechanical properties of two-photon polymerized materials
Jens Bauer et al.
OPTICS EXPRESS (2020)
Quadrupole topological photonic crystals
Li He et al.
NATURE COMMUNICATIONS (2020)
A hybrid achromatic metalens
F. Balli et al.
NATURE COMMUNICATIONS (2020)
Voxels Optimization in 3D Laser Nanoprinting
Yahya Bougdid et al.
SCIENTIFIC REPORTS (2020)
Polymerization Photoinitiators with Near-Resonance Enhanced Two-Photon Absorption Cross-Section: Toward High-Resolution Photoresist with Improved Sensitivity
Caroline Arnoux et al.
MACROMOLECULES (2020)
Shape morphing smart 3D actuator materials for micro soft robot
Hyun Kim et al.
MATERIALS TODAY (2020)
3D-printed optical probes for wafer-level testing of photonic integrated circuits
Mareike Trappen et al.
OPTICS EXPRESS (2020)
Femtosecond laser programmed artificial musculoskeletal systems
Zhuo-Chen Ma et al.
NATURE COMMUNICATIONS (2020)
Stitching-free 3D printing of millimeter-sized highly transparent spherical and aspherical optical components
Simon Ristok et al.
OPTICAL MATERIALS EXPRESS (2020)
Direct laser writing of a titanium dioxide-laden retinal cone phantom for adaptive optics-optical coherence tomography
Andrew C. Lamont et al.
OPTICAL MATERIALS EXPRESS (2020)
Fabrication of Sub-Micron Polymer Waveguides through Two-Photon Polymerization in Polydimethylsiloxane
Giulia Panusa et al.
POLYMERS (2020)
Sensitive Photoresists for Rapid Multiphoton 3D Laser Micro- and Nanoprinting
Pascal Kiefer et al.
ADVANCED OPTICAL MATERIALS (2020)
Artificial gauge field switching using orbital angular momentum modes in optical waveguides
Christina Joerg et al.
LIGHT-SCIENCE & APPLICATIONS (2020)
Miniscope3D: optimized single-shot miniature 3D fluorescence microscopy
Kyrollos Yanny et al.
LIGHT-SCIENCE & APPLICATIONS (2020)
3D printed waveguides based on photonic crystal fiber designs for complex fiber-end photonic devices
Andrea Bertoncini et al.
OPTICA (2020)
Effect of high strain rates and temperature on the micromechanical properties of 3D-printed polymer structures made by two-photon lithography
Nadia Rohbeck et al.
MATERIALS & DESIGN (2020)
Mechanical stimulation of single cells by reversible host-guest interactions in 3D microscaffolds
Marc Hippler et al.
SCIENCE ADVANCES (2020)
Multistimuli-Responsive Optical Hydrogel Nanomembranes to Construct Planar Color Display Boards for Detecting Local Environmental Changes
Muhammad Umar et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Xolography for linear volumetric 3D printing
Martin Regehly et al.
NATURE (2020)
3D nanoprinted kinoform spiral zone plates on fiber facets for high-efficiency focused vortex beam generation
Jian Yu et al.
OPTICS EXPRESS (2020)
Observation of a Charge-2 Photonic Weyl Point in the Infrared
Sachin Vaidya et al.
PHYSICAL REVIEW LETTERS (2020)
Generalized laws of refraction and reflection at interfaces between different photonic artificial gauge fields
Moshe-Ishay Cohen et al.
LIGHT-SCIENCE & APPLICATIONS (2020)
Direct laser writing of volumetric gradient index lenses and waveguides
Christian R. Ocier et al.
LIGHT-SCIENCE & APPLICATIONS (2020)
Automated detection of part quality during two-photon lithography via deep learning
Xian Yeow Lee et al.
ADDITIVE MANUFACTURING (2020)
Aspherical microlenses enabled by two-photon direct laser writing for fiber-optical microendoscopy
Baokai Wang et al.
OPTICAL MATERIALS EXPRESS (2020)
Dynamic mechanical characterization of two-photon-polymerized SZ2080 photoresist
L. Pertoldi et al.
JOURNAL OF APPLIED PHYSICS (2020)
Optical Fiber Integrated Functional Micro-/Nanostructure Induced by Two-Photon Polymerization
Cong Xiong et al.
FRONTIERS IN MATERIALS (2020)
Associative Learning by Classical Conditioning in Liquid Crystal Network Actuators
Hao Zeng et al.
MATTER (2020)
Direct Laser Writing to Generate Molds for Polymer Nanopillar Replication
Colm Delaney et al.
ACS APPLIED POLYMER MATERIALS (2020)
SERS using two-photon polymerized nanostructures for mycotoxin detection
Qing Liu et al.
RSC ADVANCES (2020)
Topological photonic crystals: a review
Hongfei Wang et al.
FRONTIERS OF OPTOELECTRONICS (2020)
3D printing of bioinspired textured surfaces with superamphiphobicity
Changyou Yan et al.
NANOSCALE (2020)
3D and 4D printing for optics and metaphotonics
Hoon Yeub Jeong et al.
NANOPHOTONICS (2020)
Thermal reflow of polymers for innovative and smart 3D structures: A review
Robert Kirchner et al.
MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2019)
Femtosecond Laser Microprinting of a Fiber Whispering Gallery Mode Resonator for Highly-Sensitive Temperature Measurements
Zhengyong Li et al.
JOURNAL OF LIGHTWAVE TECHNOLOGY (2019)
Colouration by total internal reflection and interference at microscale concave interfaces
Amy E. Goodling et al.
NATURE (2019)
Photonic-chip-on-tip: compound photonic devices fabricated on optical fibers
K. Markiewicz et al.
OPTICS EXPRESS (2019)
Topological photonics
Tomoki Ozawa et al.
REVIEWS OF MODERN PHYSICS (2019)
3D Printed Photoresponsive Materials for Photonics
Sara Nocentini et al.
ADVANCED OPTICAL MATERIALS (2019)
Multimaterial 3D laser microprinting using an integrated microfluidic system
Frederik Mayer et al.
SCIENCE ADVANCES (2019)
Development of Direct-Laser-Printable Light-Powered Nanocomposites
Ling Chen et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Adaptive optics aberration correction for deep direct laser written waveguides in the heating regime
N. Bisch et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2019)
Nanofabrication of High-Resolution Periodic Structures with a Gap Size Below 100 nm by Two-Photon Polymerization
Lei Zheng et al.
NANOSCALE RESEARCH LETTERS (2019)
Ultrasensitive hyperspectral imaging and biodetection enabled by dielectric metasurfaces
Filiz Yesilkoy et al.
NATURE PHOTONICS (2019)
Novel liquid crystal photonic devices enabled by two-photon polymerization [Invited]
Ziqian He et al.
OPTICS EXPRESS (2019)
Nanoscale optical and structural characterisation of silk
Meguya Ryu et al.
BEILSTEIN JOURNAL OF NANOTECHNOLOGY (2019)
Custom-made optical scatterers produced by 3D direct laser writing
Felix Gloeckler et al.
OPTICAL MATERIALS EXPRESS (2019)
Effect of the resin viscosity on the writing properties of two-photon polymerization
T. Zandrini et al.
OPTICAL MATERIALS EXPRESS (2019)
Biomimetic structural coloration with tunable degree of angle-independence generated by two-photon polymerization
Gordon Zyla et al.
OPTICAL MATERIALS EXPRESS (2019)
Off-Axis Holography with Uniform Illumination via 3D Printed Diffractive Optical Elements
Hao Wang et al.
ADVANCED OPTICAL MATERIALS (2019)
Observation of Complete Photonic Bandgap in Low Refractive Index Contrast Inverse Rod-Connected Diamond Structured Chalcogenides
Lifeng Chen et al.
ACS PHOTONICS (2019)
Current Biomedical Applications of 3D Printing and Additive Manufacturing
Pouyan Ahangar et al.
APPLIED SCIENCES-BASEL (2019)
Ultrastable, Deformable, and Stretchable Luminescent Organic-Inorganic Perovskite Nanocrystal-Polymer Composites for 3D Printing and White Light-Emitting Diodes
Ching-Lan Tai et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
High-Speed Direct Laser Writing of Silver Nanostructures via Two-Photon Reduction
Sourabh K. Saha et al.
ADVANCED ENGINEERING MATERIALS (2019)
Smart Compound Eyes Enable Tunable Imaging
Zhuo-Chen Ma et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Additive Manufacturing of 3D-Architected Multifunctional Metal Oxides
Daryl W. Yee et al.
ADVANCED MATERIALS (2019)
3D nanoprinting via focused electron beams
R. Winkler et al.
JOURNAL OF APPLIED PHYSICS (2019)
Experimental realization of a Weyl exceptional ring
Alexander Cerjan et al.
NATURE PHOTONICS (2019)
Photonic-integrated circuits with non-planar topologies realized by 3D-printed waveguide overpasses
Aleksandar Nesic et al.
OPTICS EXPRESS (2019)
Ultrafast multi-focus 3-D nano-fabrication based on two-photon polymerization
Qiang Geng et al.
NATURE COMMUNICATIONS (2019)
Metasurface orbital angular momentum holography
Haoran Ren et al.
NATURE COMMUNICATIONS (2019)
Limits of topological protection under local periodic driving
Z. Fedorova (Cherpakova) et al.
LIGHT-SCIENCE & APPLICATIONS (2019)
Photonic crystal nanocavity based on a topological corner state
Yasutomo Ota et al.
OPTICA (2019)
3D Nanoprinting of Perovskites
Mojun Chen et al.
ADVANCED MATERIALS (2019)
Electrochemically reconfigurable architected materials
Xiaoxing Xia et al.
NATURE (2019)
3D printing hybrid organometallic polymer-based biomaterials via laser two-photon polymerization
Evaldas Balciunas et al.
POLYMER INTERNATIONAL (2019)
Functional Materials for Two-Photon Polymerization in Microfabrication
Marco Carlotti et al.
SMALL (2019)
Additive Manufacturing: Applications and Directions in Photonics and Optoelectronics
Andrea Camposeo et al.
ADVANCED OPTICAL MATERIALS (2019)
A 3D Microscaffold Cochlear Electrode Array for Steroid Elution
Jongmoon Jong et al.
ADVANCED HEALTHCARE MATERIALS (2019)
High-Q Polymer Microcavities Integrated on a Multicore Fiber Facet for Vapor Sensing
Siyao Zhang et al.
ADVANCED OPTICAL MATERIALS (2019)
On the Schwarzschild Effect in 3D Two-Photon Laser Lithography
Liang Yang et al.
ADVANCED OPTICAL MATERIALS (2019)
Broadband out-of-plane coupling at visible wavelengths
Helge Gehring et al.
OPTICS LETTERS (2019)
Metasurface-generated complex 3-dimensional optical fields for interference lithography
Seyedeh Mahsa Kamali et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2019)
A multifunctional shape-morphing elastomer with liquid metal inclusions
Michael J. Ford et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2019)
Scalable submicrometer additive manufacturing
Sourabh K. Saha et al.
SCIENCE (2019)
Structural color three-dimensional printing by shrinking photonic crystals
Yejing Liu et al.
NATURE COMMUNICATIONS (2019)
Biocompatibility Investigation of Hybrid Organometallic Polymers for Sub-Micron 3D Printing via Laser Two-Photon Polymerisation
Evaldas Balciunas et al.
MATERIALS (2019)
Optical properties of photoresists for femtosecond 3D printing: refractive index, extinction, luminescence-dose dependence, aging, heat treatment and comparison between 1-photon and 2-photon exposure
Michael Schmid et al.
OPTICAL MATERIALS EXPRESS (2019)
Nanopillar Diffraction Gratings by Two-Photon Lithography
Julia Purtov et al.
NANOMATERIALS (2019)
Rotation-Selective Moire Magnification of Structural Color Pattern Arrays
John You En Chan et al.
ACS NANO (2019)
Systematic λ/21 resolution achieved in nanofabrication by two-photon-absorption induced polymerization
Yahya Bougdid et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2019)
Exposure-dependent refractive index of Nanoscribe IP-Dip photoresist layers
Stephan Dottermusch et al.
OPTICS LETTERS (2019)
Holographic colour prints for enhanced optical security by combined phase and amplitude control
Kevin T. P. Lim et al.
NATURE COMMUNICATIONS (2019)
Controlling the shape of 3D microstructures by temperature and light
Marc Hippler et al.
NATURE COMMUNICATIONS (2019)
Temperature calculation in metal substrates during two-photon polymerization
Emely Marie Harnisch et al.
OPTICAL MATERIALS EXPRESS (2019)
Photoinitiator Free Resins Composed of Plant-Derived Monomers for the Optical μ-3D Printing of Thermosets
Migle Lebedevaite et al.
POLYMERS (2019)
Hollow Core Light Cage: Trapping Light Behind Bars
Chhavi Jain et al.
ACS PHOTONICS (2019)
Topological edge states in bichromatic photonic crystals
F. Alpeggiani et al.
OPTICA (2019)
3D Photoluminescent Nanostructures Containing Quantum Dots Fabricated by Two-Photon Polymerization: Influence of Quantum Dots on the Spatial Resolution of Laser Writing
Ying Peng et al.
ADVANCED MATERIALS TECHNOLOGIES (2019)
3D Printing Enabled Customization of Functional Microgels
Xuan Liu et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
3D Printing of Multifunctional Hydrogels
Zhe Chen et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
3D Scaffolds to Study Basic Cell Biology
Marc Hippler et al.
ADVANCED MATERIALS (2019)
Fast micron-scale 3D printing with a resonant-scanning two-photon microscope
Benjamin W. Pearre et al.
ADDITIVE MANUFACTURING (2019)
Fabrication of multi-material 3D structures by the integration of direct laser writing and MEMS stencil patterning
Jeremy B. Reeves et al.
NANOSCALE (2019)
3D-microfabrication by two-photon polymerization of an integrated sacrificial stencil mask
Salvatore Puce et al.
MICRO AND NANO ENGINEERING (2019)
Additive-manufacturing of 3D glass-ceramics down to nanoscale resolution
Darius Gailevicius et al.
NANOSCALE HORIZONS (2019)
Low-loss fiber-to-chip couplers with ultrawide optical bandwidth
H. Gehring et al.
APL PHOTONICS (2019)
Fast fabrication of silver helical metamaterial with single-exposure femtosecond laser photoreduction
Lipu Liu et al.
NANOPHOTONICS (2019)
Quantum dot based 3D printed woodpile photonic crystals tuned for the visible
Ioanna Sakellari et al.
NANOSCALE ADVANCES (2019)
Precise assembly and joining of silver nanowires in three dimensions for highly conductive composite structures
Ying Liu et al.
INTERNATIONAL JOURNAL OF EXTREME MANUFACTURING (2019)
Focused Electron Beam Induced Deposition Synthesis of 3D Photonic and Magnetic Nanoresonators
Grace Pakeltis et al.
ACS APPLIED NANO MATERIALS (2019)
Nonradiating photonics with resonant dielectric nanostructures
Kirill Koshelev et al.
NANOPHOTONICS (2019)
Photopolymerization in 3D Printing
Ali Bagheri et al.
ACS APPLIED POLYMER MATERIALS (2019)
Observation of Type I Photonic Weyl Points in Optical Frequencies
Elena Goi et al.
LASER & PHOTONICS REVIEWS (2018)
Two-photon lithography for 3D magnetic nanostructure fabrication
Gwilym Williams et al.
NANO RESEARCH (2018)
Four-dimensional light shaping: manipulating ultrafast spatiotemporal foci in space and time
Bangshan Sun et al.
LIGHT-SCIENCE & APPLICATIONS (2018)
Glassomer-Processing Fused Silica Glass Like a Polymer
Frederik Kotz et al.
ADVANCED MATERIALS (2018)
Novel Materials for 3D Printing by Photopolymerization
Michael Layani et al.
ADVANCED MATERIALS (2018)
Ultrafast re-structuring of the electronic landscape of transparent dielectrics: new material states (Die-Met)
E. G. Gamaly et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2018)
Plasmonic Surface Lattice Resonances: A Review of Properties and Applications
V. G. Kravets et al.
CHEMICAL REVIEWS (2018)
Fabrication of Microlens Array and Its Application: A Review
Wei Yuan et al.
CHINESE JOURNAL OF MECHANICAL ENGINEERING (2018)
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Tuan D. Ngo et al.
COMPOSITES PART B-ENGINEERING (2018)
4D printing of shape memory polyurethane via stereolithography
Tingting Zhao et al.
EUROPEAN POLYMER JOURNAL (2018)
3D nanofabrication inside rapid prototyped microfluidic channels showcased by wet-spinning of single micrometre fibres
Jonas Loelsberg et al.
LAB ON A CHIP (2018)
Optofluidic gutter oil discrimination based on a hybrid-waveguide coupler in fibre
Chupao Lin et al.
LAB ON A CHIP (2018)
Improved development procedure to enhance the stability of microstructures created by two-photon polymerization
Julia Purtov et al.
MICROELECTRONIC ENGINEERING (2018)
Beyond 100 nm resolution in 3D laser lithography - Post processing solutions
G. Seniutinas et al.
MICROELECTRONIC ENGINEERING (2018)
Topological protection of photonic mid-gap defect modes
Jiho Noh et al.
NATURE PHOTONICS (2018)
In situ 3D nanoprinting of free-form coupling elements for hybrid photonic integration
P. -I. Dietrich et al.
NATURE PHOTONICS (2018)
Benchmarking surface selective vacuum ultraviolet and thermal postprocessing of thermoplastics for ultrasmooth 3-D-printed micro-optics
Robert Kirchner et al.
OPTICAL ENGINEERING (2018)
Optical fiber micro-connector with nanometer positioning precision for rapid prototyping of photonic devices
Aleksander Bogucki et al.
OPTICS EXPRESS (2018)
Micro-scale fiber-optic force sensor fabricated using direct laser writing and calibrated using machine learning
Alex J. Thompson et al.
OPTICS EXPRESS (2018)
In situ fabricated 3D micro-lenses for photonic integrated circuits
R. Thomas et al.
OPTICS EXPRESS (2018)
Imaging-based molecular barcoding with pixelated dielectric metasurfaces
Andreas Tittl et al.
SCIENCE (2018)
Humidity-responsive actuation of programmable hydrogel microstructures based on 3D printing
Chao Lv et al.
SENSORS AND ACTUATORS B-CHEMICAL (2018)
Optical 3D printing: bridging the gaps in the mesoscale
Linas Jonusauskas et al.
JOURNAL OF OPTICS (2018)
Adding chemically selective subtraction to multi-material 3D additive manufacturing
David Graefe et al.
NATURE COMMUNICATIONS (2018)
Additive manufacturing of 3D nano-architected metals
Andrey Vyatskikh et al.
NATURE COMMUNICATIONS (2018)
Magnetic Characterization of Direct-Write Free-Form Building Blocks for Artificial Magnetic 3D Lattices
Mohanad K. I. Al Mamoori et al.
MATERIALS (2018)
High-resolution 3D photopolymerization assisted by upconversion nanoparticles for rapid prototyping applications
Vasilina V. Rocheva et al.
SCIENTIFIC REPORTS (2018)
Structured Optical Materials Controlled by Light
Sara Nocentini et al.
ADVANCED OPTICAL MATERIALS (2018)
Deformation Behavior of Foam Laser Targets Fabricated by Two-Photon Polymerization
Ying Liu et al.
NANOMATERIALS (2018)
Centimeter-Height 3D Printing with Femtosecond Laser Two-Photon Polymerization
Wei Chu et al.
ADVANCED MATERIALS TECHNOLOGIES (2018)
3D Nanoprinted Plastic Kinoform X-Ray Optics
Umut T. Sanli et al.
ADVANCED MATERIALS (2018)
Polarization Micro-Optics: Circular Polarization From a Fresnel Rhomb 3D Printed on an Optical Fiber
Andrea Bertoncini et al.
IEEE PHOTONICS TECHNOLOGY LETTERS (2018)
Plasmon-directed polymerization: Regulating polymer growth with light
Yunxia Wang et al.
NANO RESEARCH (2018)
Experimental Observation of Aharonov-Bohm Cages in Photonic Lattices
Sebabrata Mukherjee et al.
PHYSICAL REVIEW LETTERS (2018)
3D printing of resin composites doped with upconversion nanoparticles for anti- counterfeiting and temperature detection
Rongping Ni et al.
OPTICS EXPRESS (2018)
Adaptive liquid crystal microlens array enabled by two-photon polymerization
Ziqian He et al.
OPTICS EXPRESS (2018)
Two-dimensional vector bending sensor based on seven-core fiber Bragg gratings
Maoxiang Hou et al.
OPTICS EXPRESS (2018)
Magnetic-field-driven ultra-small 3D hydrogel microstructures: Preparation of gel photoresist and two-photon polymerization microfabrication
Zhong Xiong et al.
SENSORS AND ACTUATORS B-CHEMICAL (2018)
Direct-write of free-form building blocks for artificial magnetic 3D lattices
Lukas Keller et al.
SCIENTIFIC REPORTS (2018)
Microphotonic needle for minimally invasive endoscopic imaging with sub-cellular resolution
Mohammad Amin Tadayon et al.
SCIENTIFIC REPORTS (2018)
Outfitting Next Generation Displays with Optical Metasurfaces
Inki Kim et al.
ACS PHOTONICS (2018)
Screening of Additive Manufactured Scaffolds Designs for Triple Negative Breast Cancer 3D Cell Culture and Stem-Like Expansion
Emma Polonio-Alcala et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2018)
Initiator-Free, Multiphoton Polymerization of Gelatin Methacrylamide
Kostas Parkatzidis et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2018)
Three-dimensional direct laser writing of biomimetic neuron structures
Haoyi Yu et al.
OPTICS EXPRESS (2018)
Femtosecond fiber Bragg grating fabrication with adaptive optics aberration compensation
Patrick S. Salter et al.
OPTICS LETTERS (2018)
Formation of Bound States in the Continuum in Hybrid Plasmonic-Photonic Systems
Shaimaa I. Azzam et al.
PHYSICAL REVIEW LETTERS (2018)
Femtosecond Laser Microprinting of a Polymer Optical Fiber Interferometer for High-Sensitivity Temperature Measurement
Chi Li et al.
POLYMERS (2018)
Sub-10-nm suspended nano-web formation by direct laser writing
Sihao Wang et al.
NANO FUTURES (2018)
Radiopaque Resists for Two-Photon Lithography To Enable Submicron 3D Imaging of Polymer Parts via X-ray Computed Tomography
Sourabh K. Saha et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Topological photonic crystal nanocavity laser
Yasutomo Ota et al.
COMMUNICATIONS PHYSICS (2018)
Influence of baking conditions on 3D microstructures by direct laser writing in negative photoresist SU-8 via two-photon polymerization
Naoto Tsutsumi et al.
JOURNAL OF LASER APPLICATIONS (2017)
Perspective on 3D printing of separation membranes and comparison to related unconventional fabrication techniques
Ze-Xian Low et al.
JOURNAL OF MEMBRANE SCIENCE (2017)
Size- and Wavelength-Dependent Two-Photon Absorption Cross-Section of CsPbBr3 Perovskite Quantum Dots
Junsheng Chen et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2017)
Development of electrically conductive microstructures based on polymer/CNT nanocomposites via two-photon polymerization
U. Staudinger et al.
MICROELECTRONIC ENGINEERING (2017)
Microactuation and sensing using reversible deformations of laser-written polymeric structures
S. Rekstyte et al.
NANOTECHNOLOGY (2017)
Three-dimensional printing of transparent fused silica glass
Frederik Kotz et al.
NATURE (2017)
Control of light by curved space in nanophotonic structures
Rivka Bekenstein et al.
NATURE PHOTONICS (2017)
Two-dimensional topological photonics
Alexander B. Khanikaev et al.
NATURE PHOTONICS (2017)
Experimental observation of optical Weyl points and Fermi arc-like surface states
Jiho Noh et al.
NATURE PHYSICS (2017)
Dynamic defects in photonic Floquet topological insulators
Christina Joerg et al.
NEW JOURNAL OF PHYSICS (2017)
Label-free detection of bovine serum albumin based on an in-fiber Mach-Zehnder interferometric biosensor
Zhengyong Li et al.
OPTICS EXPRESS (2017)
High sensitivity fiber acoustic sensor tip working at 1550 nm fabricated by two-photon polymerization technique
Min Li et al.
SENSORS AND ACTUATORS A-PHYSICAL (2017)
Multiphoton Direct Laser Writing and 3D Imaging of Polymeric Freestanding Architectures for Cell Colonization
Angelo Accardo et al.
SMALL (2017)
Experimental observation of anomalous topological edge modes in a slowly driven photonic lattice
Sebabrata Mukherjee et al.
NATURE COMMUNICATIONS (2017)
Infrared dielectric response of nanoscribe IP-dip and IP-L monomers after polymerization from 250 cm-1 to 6000 cm-1
Daniel B. Fullager et al.
OPTICAL MATERIALS EXPRESS (2017)
Refractive index measurements of photoresists for three-dimensional direct laser writing
Timo Gissibl et al.
OPTICAL MATERIALS EXPRESS (2017)
Generation of 3-dimensional polymer structures in liquid crystalline devices using direct laser writing
C. C. Tartan et al.
RSC ADVANCES (2017)
A method for positioning the focal spot location of two photon polymerization
Xu Zheng et al.
AIP ADVANCES (2017)
Plasmonic nano-printing: large-area nanoscale energy deposition for efficient surface texturing
Lei Wang et al.
LIGHT-SCIENCE & APPLICATIONS (2017)
Two-Photon Polymerization Metrology: Characterization Methods of Mechanisms and Microstructures
Christopher N. LaFratta et al.
MICROMACHINES (2017)
Light-Directed Tuning of Plasmon Resonances via Plasmon-Induced Polymerization Using Hot Electrons
Tao Ding et al.
ACS PHOTONICS (2017)
Miniature wide-spectrum mode sorter for vortex beams produced by 3D laser printing
Shlomi Lightman et al.
OPTICA (2017)
3D-printed eagle eye: Compound microlens system for foveated imaging
Simon Thiele et al.
SCIENCE ADVANCES (2017)
Selective Surface Smoothening of Polymer Microlenses by Depth Confined Softening
Nachiappan Chidambaram et al.
ADVANCED MATERIALS TECHNOLOGIES (2017)
Direct laser writing of a new type of waveguides in silver containing glasses
Alain Abou Khalil et al.
SCIENTIFIC REPORTS (2017)
Generation of bioinspired structural colors via two-photon polymerization
Gordon Zyla et al.
SCIENTIFIC REPORTS (2017)
Additive manufacture of complex 3D Au-containing nanocomposites by simultaneous two-photon polymerisation and photoreduction
Qin Hu et al.
SCIENTIFIC REPORTS (2017)
Optically Clear and Resilient Free-Form μ-Optics 3D-Printed via Ultrafast Laser Lithography
Linas Jonusauskas et al.
MATERIALS (2017)
Tunable multilayer submicrostructures fabricated by interference assisted two-photon polymerization
Qian-Qian Liu et al.
APPLIED PHYSICS LETTERS (2017)
Direct Laser Writing of Low-Density Interdigitated Foams for Plasma Drive Shaping
James S. Oakdale et al.
ADVANCED FUNCTIONAL MATERIALS (2017)
Photonic Microhand with Autonomous Action
Daniele Martella et al.
ADVANCED MATERIALS (2017)
Curved-space topological phases in photonic lattices
Eran Lustig et al.
PHYSICAL REVIEW A (2017)
Effect of Proximity of Features on the Damage Threshold During Submicron Additive Manufacturing Via Two-Photon Polymerization
Sourabh K. Saha et al.
JOURNAL OF MICRO AND NANO-MANUFACTURING (2017)
Polymers for 3D Printing and Customized Additive Manufacturing
Samuel Clark Ligon et al.
CHEMICAL REVIEWS (2017)
Topological photonics: From crystals to particles
Gleb Siroki et al.
PHYSICAL REVIEW B (2017)
Direct laser writing of complex microtubes using femtosecond vortex beams
Liang Yang et al.
APPLIED PHYSICS LETTERS (2017)
3D printing of polymer matrix composites: A review and prospective
Xin Wang et al.
COMPOSITES PART B-ENGINEERING (2017)
Surface-modified complex SU-8 microstructures for indirect optical manipulation of single cells
Badri L. Aekbote et al.
BIOMEDICAL OPTICS EXPRESS (2016)
Tuning the Refractive Index in Gyroid Photonic Crystals via Lead-Chalcogenide Nanocrystal Coating
Elena Goi et al.
ADVANCED OPTICAL MATERIALS (2016)
Fabrication of Conductive 3D Gold-Containing Microstructures via Direct Laser Writing
Eva Blasco et al.
ADVANCED MATERIALS (2016)
Ultrashort laser pulse ablation of copper, silicon and gelatin: effect of the pulse duration on the ablation thresholds and the incubation coefficients
Chandra S. R. Nathala et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2016)
Highly uniform parallel microfabrication using a large numerical aperture system
Zi-Yu Zhang et al.
APPLIED PHYSICS LETTERS (2016)
3D-printing technologies for electrochemical applications
Adriano Ambrosi et al.
CHEMICAL SOCIETY REVIEWS (2016)
Direct Writing Target Structures by Two-Photon Polymerization
L. J. Jiang et al.
FUSION SCIENCE AND TECHNOLOGY (2016)
Hybrid Refractive-Diffractive Optical Vortex Microlens
Zhen-Nan Tian et al.
IEEE PHOTONICS TECHNOLOGY LETTERS (2016)
Estimation of line dimensions in 3D direct laser writing lithography
M. G. Guney et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2016)
Plasmon assisted 3D microstructuring of gold nanoparticle-doped polymers
Linas Jonusauskas et al.
NANOTECHNOLOGY (2016)
Ablation-cooled material removal with ultrafast bursts of pulses
Can Kerse et al.
NATURE (2016)
Approaching theoretical strength in glassy carbon nanolattices
J. Bauer et al.
NATURE MATERIALS (2016)
Two-photon direct laser writing of ultracompact multi-lens objectives (vol 7, 11763, 2016)
Timo Gissibl et al.
NATURE PHOTONICS (2016)
Symmetry-protected topological photonic crystal in three dimensions
Ling Lu et al.
NATURE PHYSICS (2016)
Massively parallel femtosecond laser processing
Satoshi Hasegawa et al.
OPTICS EXPRESS (2016)
Post-print UV curing method for improving the mechanical properties of prototypes derived from two-photon lithography
James S. Oakdale et al.
OPTICS EXPRESS (2016)
Laser-writing inside uniaxially birefringent crystals: fine morphology of ultrashort pulse-induced changes in lithium niobate
P. Karpinski et al.
OPTICS EXPRESS (2016)
Ultra-compact on-chip LED collimation optics by 3D femtosecond direct laser writing
Simon Thiele et al.
OPTICS LETTERS (2016)
Fabrication of gold microstructures using negative photoresists doped with gold ions through two-photon excitation
Ryotaro Nakamura et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2016)
Metalenses at visible wavelengths: Diffraction-limited focusing and subwavelength resolution imaging
Mohammadreza Khorasaninejad et al.
SCIENCE (2016)
Surface plasmon resonance refractive sensor based on silver-coated side-polished fiber
Jing Zhao et al.
SENSORS AND ACTUATORS B-CHEMICAL (2016)
Sub-micrometre accurate free-form optics by three-dimensional printing on single-mode fibres
Timo Gissibl et al.
NATURE COMMUNICATIONS (2016)
Fabrication of polarization-independent single-mode waveguides in lithium niobate crystal with femtosecond laser pulses
Jia Qi et al.
OPTICAL MATERIALS EXPRESS (2016)
Transverse writing of three-dimensional tubular optical waveguides in glass with a slit-shaped femtosecond laser beam
Yang Liao et al.
SCIENTIFIC REPORTS (2016)
Additive Manufacture of Three Dimensional Nanocomposite Based Objects through Multiphoton Fabrication
Yaan Liu et al.
POLYMERS (2016)
Nanoscale Precision of 3D Polymerization via Polarization Control
Sima Rekstyte et al.
ADVANCED OPTICAL MATERIALS (2016)
Ultrafast laser processing of materials: from science to industry
Mangirdas Malinauskas et al.
LIGHT-SCIENCE & APPLICATIONS (2016)
Three-Dimensional Single Gyroid Photonic Crystals with a Mid-Infrared Bandgap
Siying Peng et al.
ACS PHOTONICS (2016)
Optical and Infrared Helical Metamaterials
Johannes Kaschke et al.
NANOPHOTONICS (2016)
Spatial beam intensity shaping using phase masks on single-mode optical fibers fabricated by femtosecond direct laser writing
Timo Gissibl et al.
OPTICA (2016)
Ultrasensitive magnetic field sensor based on an in-fiber Mach-Zehnder interferometer with a magnetic fluid component
Zhengyong Li et al.
PHOTONICS RESEARCH (2016)
Bound states in the continuum
Chia Wei Hsu et al.
NATURE REVIEWS MATERIALS (2016)
Biomimetic gyroid nanostructures exceeding their natural origins
Zongsong Gan et al.
SCIENCE ADVANCES (2016)
Multimaterial 4D Printing with Tailorable Shape Memory Polymers
Qi Ge et al.
SCIENTIFIC REPORTS (2016)
Precise 3D printing of micro/nanostructures using highly conductive carbon nanotube-thiol-acrylate composites
Y. Liu et al.
LASER 3D MANUFACTURING III (2016)
Two-photon direct laser writing of ultracompact multi-lens objectives
Timo Gissibl et al.
NATURE PHOTONICS (2016)
Two-Photon Lithography of 3D Nanocomposite Piezoelectric Scaffolds for Cell Stimulation
Attilio Marino et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Light-Fueled Microscopic Walkers
Hao Zeng et al.
ADVANCED MATERIALS (2015)
3D Printed Microtransporters: Compound Micromachines for Spatiotemporally Controlled Delivery of Therapeutic Agents
Tian-Yun Huang et al.
ADVANCED MATERIALS (2015)
Two-photon polymerization microfabrication of hydrogels: an advanced 3D printing technology for tissue engineering and drug delivery
Jin-Feng Xing et al.
CHEMICAL SOCIETY REVIEWS (2015)
A Fiber-Endface, Fabry-Perot Vapor Microsensor Fabricated by Multiphoton Polymerization
Vasileia Melissinaki et al.
IEEE JOURNAL OF SELECTED TOPICS IN QUANTUM ELECTRONICS (2015)
High Curvature Concave-Convex Microlens
Jun-Jie Xu et al.
IEEE PHOTONICS TECHNOLOGY LETTERS (2015)
Simultaneous Refractive Index and Temperature Measurement With LPFG and Liquid-Filled PCF
Guolu Yin et al.
IEEE PHOTONICS TECHNOLOGY LETTERS (2015)
Tuning the refractive index in 3D direct laser writing lithography: towards GRIN microoptics
Albertas Zukauskas et al.
LASER & PHOTONICS REVIEWS (2015)
Effect of the photoinitiator presence and exposure conditions on laser-induced damage threshold of ORMOSIL (SZ2080)
Albertas Zukauskas et al.
OPTICAL MATERIALS (2015)
Parallel direct laser writing of micro-optical and photonic structures using spatial light modulator
Liang Yang et al.
OPTICS AND LASERS IN ENGINEERING (2015)
Scheme for Achieving a Topological Photonic Crystal by Using Dielectric Material
Long-Hua Wu et al.
PHYSICAL REVIEW LETTERS (2015)
Experimental observation of Weyl points
Ling Lu et al.
SCIENCE (2015)
A novel thermal reflow method for the fabrication of microlenses with an ultrahigh focal number
M. Wang et al.
RSC ADVANCES (2015)
Three-dimensional cage-like microscaffolds for cell invasion studies
Barbara Spagnolo et al.
SCIENTIFIC REPORTS (2015)
A review on the processing accuracy of two-photon polymerization
Xiaoqin Zhou et al.
AIP ADVANCES (2015)
Demonstration of a 3D Radar-Like SERS Sensor Micro- and Nanofabricated on an Optical Fiber
Zhenwei Xie et al.
ADVANCED OPTICAL MATERIALS (2015)
Multifocal optical nanoscopy for big data recording at 30 TB capacity and gigabits/second data rate
Xiangping Li et al.
OPTICA (2015)
Optical Properties of Gyroid Structured Materials: From Photonic Crystals to Metamaterials
James A. Dolan et al.
ADVANCED OPTICAL MATERIALS (2015)
Preclinical study of SZ2080 material 3D microstructured scaffolds for cartilage tissue engineering made by femtosecond direct laser writing lithography
Justinas Maciulaitis et al.
BIOFABRICATION (2015)
High-Resolution 3D Direct Laser Writing for LiquidCrystalline Elastomer Microstructures
Hao Zeng et al.
ADVANCED MATERIALS (2014)
Efficient speckle-free laser marking using a spatial light modulator
Krystian L. Wlodarczyk et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2014)
Two-photon polymerization of a three dimensional structure using beams with orbital angular momentum
Shi-Jie Zhang et al.
APPLIED PHYSICS LETTERS (2014)
Laser Photofabrication of Cell-Containing Hydrogel Constructs
Aleksandr Ovsianikov et al.
LANGMUIR (2014)
Laser nanofabrication in photoresists and azopolymers
Zouheir Sekkat et al.
LASER & PHOTONICS REVIEWS (2014)
3D bioprinting of tissues and organs
Sean V. Murphy et al.
NATURE BIOTECHNOLOGY (2014)
Topological Nature of Optical Bound States in the Continuum
Bo Zhen et al.
PHYSICAL REVIEW LETTERS (2014)
Projection two-photon polymerization using a spatial light modulator
Liang Yang et al.
OPTICS COMMUNICATIONS (2014)
Graphene oxide-based micropatterns via high-throughput multiphoton-induced reduction and ablation
Yi-Cheng Li et al.
OPTICS EXPRESS (2014)
Adaptive optics enhanced direct laser writing of high refractive index gyroid photonic crystals in chalcogenide glass
Benjamin P. Cumming et al.
OPTICS EXPRESS (2014)
Exploring the depth range for three-dimensional laser machining with aberration correction
P. S. Salter et al.
OPTICS EXPRESS (2014)
Holographic multi-focus 3D two-photon polymerization with real-time calculated holograms
Gaszton Vizsnyiczai et al.
OPTICS EXPRESS (2014)
Three-dimensional parallel recording with a Debye diffraction-limited and aberration-free volumetric multifocal array
Haoran Ren et al.
OPTICS LETTERS (2014)
Two-photon polymerization: investigation of chemical and mechanical properties of resins using Raman microspectroscopy
Li Jia Jiang et al.
OPTICS LETTERS (2014)
High-sensitivity strain sensor based on inflated long period fiber grating
Xiaoyong Zhong et al.
OPTICS LETTERS (2014)
3D direct laser writing using a 405 nm diode laser
Patrick Mueller et al.
OPTICS LETTERS (2014)
Aharonov-Bohm photonic cages in waveguide and coupled resonator lattices by synthetic magnetic fields
Stefano Longhi
OPTICS LETTERS (2014)
Characterization of photopolymers used in laser 3D micro/nanolithography by means of laser-induced damage threshold (LIDT)
Albertas Zukauskas et al.
OPTICAL MATERIALS EXPRESS (2014)
Direct laser writing of random Au nanoparticle three-dimensional structures for highly reproducible micro-SERS measurements
Irene Izquierdo-Lorenzo et al.
RSC ADVANCES (2014)
Adaptive optical microscopy: the ongoing quest for a perfect image
Martin J. Booth
LIGHT-SCIENCE & APPLICATIONS (2014)
Optical storage arrays: a perspective for future big data storage
Min Gu et al.
LIGHT-SCIENCE & APPLICATIONS (2014)
Optimized SU-8 Processing for Low-Cost Microstructures Fabrication without Cleanroom Facilities
Vania C. Pinto et al.
MICROMACHINES (2014)
Femtosecond laser three-dimensional micro- and nanofabrication
Koji Sugioka et al.
APPLIED PHYSICS REVIEWS (2014)
Hydrogels for Two-Photon Polymerization: A Toolbox for Mimicking the Extracellular Matrix
Jan Torgersen et al.
ADVANCED FUNCTIONAL MATERIALS (2013)
Titania Woodpiles with Complete Three-Dimensional Photonic Bandgaps in the Visible
Andreas Froelich et al.
ADVANCED MATERIALS (2013)
Two-photon nanolithography of positive photoresist thin film with ultrafast laser direct writing
Hong-Zhong Cao et al.
APPLIED PHYSICS LETTERS (2013)
High-Q asymmetric polymer microcavities directly fabricated by two-photon polymerization
Zhao-Pei Liu et al.
APPLIED PHYSICS LETTERS (2013)
Monolithic generators of pseudo-nondiffracting optical vortex beams at the microscale
Albertas Zukauskas et al.
APPLIED PHYSICS LETTERS (2013)
A review on 3D micro-additive manufacturing technologies
Mohammad Vaezi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Analysis of the Three-Dimensional Focal Positioning Capability of Adaptive Optic Elements
P. S. Salter et al.
INTERNATIONAL JOURNAL OF OPTOMECHATRONICS (2013)
Three-dimensional optical laser lithography beyond the diffraction limit
Joachim Fischer et al.
LASER & PHOTONICS REVIEWS (2013)
Redox Multiphoton Polymerization for 3D Nanofabrication
Elmina Kabouraki et al.
NANO LETTERS (2013)
Photonic Floquet topological insulators
Mikael C. Rechtsman et al.
NATURE (2013)
Fabrication and deformation of three-dimensional hollow ceramic nanostructures
Dongchan Jang et al.
NATURE MATERIALS (2013)
Weyl points and line nodes in gyroid photonic crystals
Ling Lu et al.
NATURE PHOTONICS (2013)
Miniature chiral beamsplitter based on gyroid photonic crystals
Mark D. Turner et al.
NATURE PHOTONICS (2013)
Space-division multiplexing in optical fibres
D. J. Richardson et al.
NATURE PHOTONICS (2013)
Group theory of circular-polarization effects in chiral photonic crystals with four-fold rotation axes applied to the eight-fold intergrowth of gyroid nets
Matthias Saba et al.
PHYSICAL REVIEW B (2013)
Simultaneous compensation for aberration and axial elongation in three-dimensional laser nanofabrication by a high numerical-aperture objective
Benjamin. P. Cumming et al.
OPTICS EXPRESS (2013)
Multi foci with diffraction limited resolution
Erik H. Waller et al.
OPTICS EXPRESS (2013)
Single-pulse multiphoton polymerization of complex structures using a digital multimirror device
Benjamin Mills et al.
OPTICS EXPRESS (2013)
Three-dimensional laser micro-sculpturing of silicone: towards bio-compatible scaffolds
Sima Rekstyte et al.
OPTICS EXPRESS (2013)
Transmission phase gratings fabricated with direct laser writing as color filters in the visible
Michal Nawrot et al.
OPTICS EXPRESS (2013)
Fabrication of antireflection subwavelength gratings at the tips of optical fibers using UV nanoimprint lithography
Yoshiaki Kanamori et al.
OPTICS EXPRESS (2013)
Three-dimensional multi-photon direct laser writing with variable repetition rate
Joachim Fischer et al.
OPTICS EXPRESS (2013)
Ultrafast laser nanostructuring of photopolymers: A decade of advances
Mangirdas Malinauskas et al.
PHYSICS REPORTS-REVIEW SECTION OF PHYSICS LETTERS (2013)
Terabit-Scale Orbital Angular Momentum Mode Division Multiplexing in Fibers
Nenad Bozinovic et al.
SCIENCE (2013)
Three-dimensional deep sub-diffraction optical beam lithography with 9 nm feature size
Zongsong Gan et al.
NATURE COMMUNICATIONS (2013)
High-aspect 3D two-photon polymerization structuring with widened objective working range (WOW-2PP)
Kotaro Obata et al.
LIGHT-SCIENCE & APPLICATIONS (2013)
Effects of pulsewidth on two-photon polymerization
Bo Tan et al.
DESIGNED MONOMERS AND POLYMERS (2013)
Diffusion-Assisted High-Resolution Direct Femtosecond Laser Writing
Ioanna Sakellari et al.
ACS NANO (2012)
Tailored 3D Mechanical Metamaterials Made by Dip-in Direct-Laser-Writing Optical Lithography
Tiemo Bueckmann et al.
ADVANCED MATERIALS (2012)
Closely packed hexagonal conical microlens array fabricated by direct laser photopolymerization
Albertas Zukauskas et al.
APPLIED OPTICS (2012)
Single-pulse multiphoton fabrication of high aspect ratio structures with sub-micron features using vortex beams
Benjamin Mills et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2012)
In vitro and in vivo biocompatibility study on laser 3D microstructurable polymers
Mangirdas Malinauskas et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2012)
Mesenchymal Stem Cell Interactions with 3D ECM Modules Fabricated via Multiphoton Excited Photochemistry
Ping-Jung Su et al.
BIOMACROMOLECULES (2012)
Development of functional sub-100 nm structures with 3D two-photon polymerization technique and optical methods for characterization
V. Ferreras Paz et al.
JOURNAL OF LASER APPLICATIONS (2012)
Graphene-doped photo-patternable ionogels: tuning of conductivity and mechanical stability of 3D microstructures
Mohamed Oubaha et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
3D microoptical elements formed in a photostructurable germanium silicate by direct laser writing
M. Malinauskas et al.
OPTICS AND LASERS IN ENGINEERING (2012)
Adaptive optics enables 3D STED microscopy in aberrating specimens
Travis J. Gould et al.
OPTICS EXPRESS (2012)
Active aberration- and point-spread-function control in direct laser writing
Erik H. Waller et al.
OPTICS EXPRESS (2012)
Two-photon polymerization with variable repetition rate bursts of femtosecond laser pulses
Tommaso Baldacchini et al.
OPTICS EXPRESS (2012)
High-throughput rear-surface drilling of microchannels in glass based on electron dynamics control using femtosecond pulse trains
Lan Jiang et al.
OPTICS LETTERS (2012)
Adaptive slit beam shaping for direct laser written waveguides
P. S. Salter et al.
OPTICS LETTERS (2012)
Two-photon polymerization technique with sub-50 nm resolution by sub-10 fs laser pulses
Moritz Emons et al.
OPTICAL MATERIALS EXPRESS (2012)
Simultaneous additive and subtractive three-dimensional nanofabrication using integrated two-photon polymerization and multiphoton ablation
Wei Xiong et al.
LIGHT-SCIENCE & APPLICATIONS (2012)
Subwavelength Direct Laser Patterning of Conductive Gold Nanostructures by Simultaneous Photopolymerization and Photoreduction
Shobha Shukla et al.
ACS NANO (2011)
Sub-15nm Optical Fiber Nanoimprint Lithography: A Parallel, Self-aligned and Portable Approach
Gorgi Kostovski et al.
ADVANCED MATERIALS (2011)
Tailor-made three-dimensional hybrid scaffolds for cell cultures
Stylianos Psycharakis et al.
BIOMEDICAL MATERIALS (2011)
Two-photon polymerization with optimized spatial light modulator
Lóránd Kelemen et al.
Journal of the European Optical Society-Rapid Publications (2011)
Experimental Observation of Optical Bound States in the Continuum
Yonatan Plotnik et al.
PHYSICAL REVIEW LETTERS (2011)
Three-dimensional micro-/nano-structuring via direct write polymerization with picosecond laser pulses
Mangirdas Malinauskas et al.
OPTICS EXPRESS (2011)
Fabrication and characterization of three-dimensional biomimetic chiral composites
Mark D. Turner et al.
OPTICS EXPRESS (2011)
Second-harmonic optimization of computer-generated hologram
Satoshi Hasegawa et al.
OPTICS LETTERS (2011)
Dynamic generation of Debye diffraction-limited multifocal arrays for direct laser printing nanofabrication
Han Lin et al.
OPTICS LETTERS (2011)
Direct laser writing of 3D scaffolds for neural tissue engineering applications
V. Melissinaki et al.
BIOFABRICATION (2011)
Three-dimensional direct laser writing inspired by stimulated-emission-depletion microscopy [Invited]
Joachim Fischer et al.
OPTICAL MATERIALS EXPRESS (2011)
Highly Non-Linear Quantum Dot Doped Nanocomposites for Functional Three-Dimensional Structures Generated by Two-Photon Polymerization
Baohua Jia et al.
ADVANCED MATERIALS (2010)
Two-Photon Lithography of Sub-Wavelength Metallic Structures in a Polymer Matrix
Shobha Shukla et al.
ADVANCED MATERIALS (2010)
Ferrofluids for Fabrication of Remotely Controllable Micro-Nanomachines by Two-Photon Polymerization
Hong Xia et al.
ADVANCED MATERIALS (2010)
Two-photon polymerization of titanium-containing sol-gel composites for three-dimensional structure fabrication
I. Sakellari et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2010)
High numerical aperture microlens arrays of close packing
Dong Wu et al.
APPLIED PHYSICS LETTERS (2010)
Micro-Optics Fabrication on Top of Optical Fibers Using Two-Photon Lithography
Carlo Liberale et al.
IEEE PHOTONICS TECHNOLOGY LETTERS (2010)
Discrete optics in femtosecond-laser-written photonic structures
Alexander Szameit et al.
JOURNAL OF PHYSICS B-ATOMIC MOLECULAR AND OPTICAL PHYSICS (2010)
High performance magnetically controllable microturbines
Ye Tian et al.
LAB ON A CHIP (2010)
Embellishment of microfluidic devices via femtosecond laser micronanofabrication for chip functionalization
Juan Wang et al.
LAB ON A CHIP (2010)
3D ARTIFICIAL POLYMERIC SCAFFOLDS FOR STEM CELL GROWTH FABRICATED BY FEMTOSECOND LASER
M. Malinauskas et al.
LITHUANIAN JOURNAL OF PHYSICS (2010)
Photoinitiated Polymerization: Advances, Challenges, and Opportunities
Yusuf Yagci et al.
MACROMOLECULES (2010)
Designable 3D nanofabrication by femtosecond laser direct writing
Yong-Lai Zhang et al.
NANO TODAY (2010)
Optical micro-structures fabricated on top of optical fibers by means of two-photon photopolymerization
G. Cojoc et al.
MICROELECTRONIC ENGINEERING (2010)
Mechanisms of three-dimensional structuring of photo-polymers by tightly focussed femtosecond laser pulses
Mangirdas Malinauskas et al.
OPTICS EXPRESS (2010)
Multi-focus two-photon polymerization technique based on individually controlled phase modulation
Kotaro Obata et al.
OPTICS EXPRESS (2010)
Fabrication of three-dimensional 1 x 4 splitter waveguides inside a glass substrate with spatially phase modulated laser beam
Masaaki Sakakura et al.
OPTICS EXPRESS (2010)
Multiphoton polymerization of hybrid materials
Maria Farsari et al.
JOURNAL OF OPTICS (2010)
Femtosecond laser polymerization of hybrid/integrated micro-optical elements and their characterization
Mangirdas Malinauskas et al.
JOURNAL OF OPTICS (2010)
Photosensitive Polymeric Materials for Two-Photon 3D WORM Optical Data Storage Systems
Ciceron O. Yanez et al.
ACS APPLIED MATERIALS & INTERFACES (2009)
Femtosecond Lasers in Ophthalmology
H. Kaz Soong et al.
AMERICAN JOURNAL OF OPHTHALMOLOGY (2009)
Three-dimensional fabrication of optically active microstructures containing an electroluminescent polymer
C. R. Mendonca et al.
APPLIED PHYSICS LETTERS (2009)
Fast parallel diffractive multi-beam femtosecond laser surface micro-structuring
Zheng Kuang et al.
APPLIED SURFACE SCIENCE (2009)
100% Fill-Factor Aspheric Microlens Arrays (AMLA) With Sub-20-nm Precision
Dong Wu et al.
IEEE PHOTONICS TECHNOLOGY LETTERS (2009)
Femtosecond laser rapid prototyping of nanoshells and suspending components towards microfluidic devices
Dong Wu et al.
LAB ON A CHIP (2009)
Five-dimensional optical recording mediated by surface plasmons in gold nanorods
Peter Zijlstra et al.
NATURE (2009)
Femtosecond two-photon absorption measurements based on the accumulative photothermal effect and the Rayleigh interferometer
Luis Rodriguez et al.
OPTICS EXPRESS (2009)
Independent control of beam astigmatism and ellipticity using a SLM for fs-laser waveguide writing
A. Ruiz de la Cruz et al.
OPTICS EXPRESS (2009)
Axial birefringence induced focus splitting in lithium niobate
Guangyong Zhou et al.
OPTICS EXPRESS (2009)
Shrinkage of microstructures produced by two-photon polymerization of Zr-based hybrid photosensitive materials
Aleksandr Ovsianikov et al.
OPTICS EXPRESS (2009)
Achieving λ/20 Resolution by One-Color Initiation and Deactivation of Polymerization
Linjie Li et al.
SCIENCE (2009)
Two-Color Single-Photon Photoinitiation and Photoinhibition for Subdiffraction Photolithography
Timothy F. Scott et al.
SCIENCE (2009)
Gold Helix Photonic Metamaterial as Broadband Circular Polarizer
Justyna K. Gansel et al.
SCIENCE (2009)
Ultra-Low Shrinkage Hybrid Photosensitive Material for Two-Photon Polymerization Microfabrication
Aleksandr Ovsianikov et al.
ACS NANO (2008)
Thermally stable organic-inorganic hybrid photoresists for fabrication of photonic band gap structures with direct laser writing
Yoonho Jun et al.
ADVANCED MATERIALS (2008)
Multicolor polymer nanocomposites: In situ synthesis and fabrication of 3D microstructures
Zheng-Bin Sun et al.
ADVANCED MATERIALS (2008)
Three dimensional micromachining inside a transparent material by single pulse femtosecond laser through a hologram
Masahiro Yamaji et al.
APPLIED PHYSICS LETTERS (2008)
Nanoparticle plasmon-assisted two-photon polymerization induced by incoherent excitation source
Kosei Ueno et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2008)
Two-photon excitation of dye-doped liquid crystal by a cw-laser irradiation
Naoki Murazawa et al.
MOLECULAR CRYSTALS AND LIQUID CRYSTALS (2008)
Photonic metamaterials by direct laser writing and silver chemical vapour deposition
Michael S. Rill et al.
NATURE MATERIALS (2008)
Investigation of three-dimensional pattern collapse owing to surface tension using an imperfection finite element model
Sang-Hu Park et al.
MICROELECTRONIC ENGINEERING (2008)
Bound states in the continuum in photonics
D. C. Marinica et al.
PHYSICAL REVIEW LETTERS (2008)
Three-dimensional parallel holographic micropatterning using a spatial light modulator
Nathan J. Jenness et al.
OPTICS EXPRESS (2008)
Engineering stop gaps of inorganic-organic polymeric 3D woodpile photonic crystals with post-thermal treatment
Jiafang Li et al.
OPTICS EXPRESS (2008)
Shaping ultrafast laser inscribed optical waveguides using a deformable mirror
R. R. Thomson et al.
OPTICS EXPRESS (2008)
Fibre Bragg gratings in structural health monitoring - Present status and applications
Mousumi Majumder et al.
SENSORS AND ACTUATORS A-PHYSICAL (2008)
Two- and three-dimensional micro/nanostructure patterning of CdS-polymer nanocomposites with a laser interference technique and in situ synthesis
Zeng-Bin Sun et al.
NANOTECHNOLOGY (2008)
Two-photon polymerization technique for microfabrication of CAD-designed 3D scaffolds from commercially available photosensitive materials
Aleksandr Ovsianikov et al.
JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2007)
Sub-micron surface patterning by laser irradiation through microlens arrays
C. S. Lim et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
Electroactivate shape-memory polymer filled with nanocarbon particles and short carbon fibers
Jinsong Leng et al.
APPLIED PHYSICS LETTERS (2007)
Fabrication of silicon inverse woodpile photonic crystals
Martin Hermatschweiler et al.
ADVANCED FUNCTIONAL MATERIALS (2007)
Optimizing two-photon absorption for volumetric optical data storage
N. S. Makarov et al.
JOURNAL OF THE OPTICAL SOCIETY OF AMERICA B-OPTICAL PHYSICS (2007)
All-optical magnetic recording with circularly polarized light
C. D. Stanciu et al.
PHYSICAL REVIEW LETTERS (2007)
Two-dimensional slicing method to speed up the fabrication of micro-objects based on two-photon polymerization
Chao-Yaug Liao et al.
APPLIED PHYSICS LETTERS (2007)
Three-dimensional photofabrication with femtosecond lasers for applications in photonics and biomedicine
A. Ovsianikov et al.
APPLIED SURFACE SCIENCE (2007)
Improving spatial resolution of two-photon microfabrication by using photoinitiator with high initiating efficiency
Jin-Feng Xing et al.
APPLIED PHYSICS LETTERS (2007)
Computer generation of optimal holograms for optical trap arrays
Roberto Di Leonardo et al.
OPTICS EXPRESS (2007)
Ultraprecise microreproduction of a three-dimensional artistic sculpture by multipath scanning method in two-photon photopolymerization
Dong-Yol Yang et al.
APPLIED PHYSICS LETTERS (2007)
Three-dimensional silicon inverse photonic quasicrystals for infrared wavelengths
Alexandra Ledermann et al.
NATURE MATERIALS (2006)
Improvement of spatial resolution in nano-stereolithography using radical quencher
Sang Hu Park et al.
MACROMOLECULAR RESEARCH (2006)
Freeform multiphoton excited microfabrication for biological applications using a rapid prototyping CAD-based approach
Lawrence P. Cunningham et al.
OPTICS EXPRESS (2006)
Three-dimensional SiCN ceramic microstructures via nano-stereolithography of inorganic polymer photoresists
Tuan Anh Pham et al.
ADVANCED FUNCTIONAL MATERIALS (2006)
Laser-matter interaction in the bulk of a transparent solid: Confined microexplosion and void formation
Eugene G. Gamaly et al.
PHYSICAL REVIEW B (2006)
Biologically inspired artificial compound eyes
KH Jeong et al.
SCIENCE (2006)
Axicon lens on optical fiber forming optical tweezers, made by focused ion beam milling
S Cabrini et al.
MICROELECTRONIC ENGINEERING (2006)
Toward nanometer-scale optical photolithography: Utilizing the near-field of bowtie optical nanoantennas
A Sundaramurthy et al.
NANO LETTERS (2006)
Two-photon-induced reduction of metal ions for fabricating three-dimensional electrically conductive metallic microstructure
T Tanaka et al.
APPLIED PHYSICS LETTERS (2006)
New route to three-dimensional photonic bandgap materials:: Silicon double inversion of polymer templates
N Tétreault et al.
ADVANCED MATERIALS (2006)
Recent developments in the use of two-photon polymerization in precise 2D and 3D microfabrications
KS Lee et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2006)
Micro lens fabrication by means of femtosecond two photon photopolymerization
R Guo et al.
OPTICS EXPRESS (2006)
Experimental evidence for superprism effects in three-dimensional polymer photonic crystals
J Serbin et al.
ADVANCED MATERIALS (2006)
Predictive aberration correction for multilayer optical data storage
MJ Booth et al.
APPLIED PHYSICS LETTERS (2006)
Interfacial and electrokinetic characterization of IPA solutions related to semiconductor wafer drying and cleaning
Jin-Goo Park et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2006)
Fabrication of three-dimensional structures by three-photon polymerization
M Farsari et al.
OPTICS LETTERS (2005)
Spatiotemporal coherent control using shaped, temporally focused pulses
D Oron et al.
OPTICS EXPRESS (2005)
Effect of spherical aberration on the propagation of a tightly focused femtosecond laser pulse inside fused silica
Q Sun et al.
JOURNAL OF OPTICS A-PURE AND APPLIED OPTICS (2005)
Subregional slicing method to increase three-dimensional nanofabrication efficiency in two-photon polymerization
SH Park et al.
APPLIED PHYSICS LETTERS (2005)
Nonlinear absorption mechanism in ablation of transparent materials by high power and ultrashort laser pulses
PG Eliseev et al.
APPLIED SURFACE SCIENCE (2005)
Slit beam shaping method for femtosecond laser direct-write fabrication of symmetric waveguides in bulk glasses
M Ams et al.
OPTICS EXPRESS (2005)
Multiphoton excited fabrication of collagen matrixes cross-linked by a modified benzophenone dimer: Bioactivity and enzymatic degradation
S Basu et al.
BIOMACROMOLECULES (2005)
Simultaneous spatial and temporal focusing of femtosecond pulses
GH Zhu et al.
OPTICS EXPRESS (2005)
Improved spatial resolution and surface roughness in photopolymerization-based laser nanowriting
K Takada et al.
APPLIED PHYSICS LETTERS (2005)
Femtosecond laser microfabrication of periodic structures using a microlens array
S Matsuo et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2005)
Multiple-spot parallel processing for laser micronanofabrication
J Kato et al.
APPLIED PHYSICS LETTERS (2005)
Two-photon polymerization of metal ions doped acrylate monomers and oligomers for three-dimensional structure fabrication
XM Duan et al.
THIN SOLID FILMS (2004)
Enzymatic activity of alkaline phosphatase inside protein and polymer structures fabricated via multiphoton excitation
S Basu et al.
BIOMACROMOLECULES (2004)
Three-dimensional woodpile photonic crystal templates for the infrared spectral range
V Mizeikis et al.
OPTICS LETTERS (2004)
Direct laser writing of three-dimensional photonic-crystal templates for telecommunications
M Deubel et al.
NATURE MATERIALS (2004)
Properties of crosslinked protein matrices for tissue engineering applications synthesized by multiphoton excitation
S Basu et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2004)
Arbitrary structuring of two-dimensional photonic crystals by use of phase-only Fourier gratings
G Lee et al.
OPTICS LETTERS (2004)
Shape precompensation in two-photon laser nanowriting of photonic lattices
HB Sun et al.
APPLIED PHYSICS LETTERS (2004)
SU-8 for real three-dimensional subdiffraction-limit two-photon microfabrication
WH Teh et al.
APPLIED PHYSICS LETTERS (2004)
Hydrogels for tissue engineering: scaffold design variables and applications
JL Drury et al.
BIOMATERIALS (2003)
Scaling laws of voxels in two-photon photopolymerization nanofabrication
HB Sun et al.
APPLIED PHYSICS LETTERS (2003)
Experimental investigation of single voxels for laser nanofabrication via two-photon photopolymerization
HB Sun et al.
APPLIED PHYSICS LETTERS (2003)
Design and application of high-sensitivity two-photon initiators for three-dimensional microfabrication
SM Kuebler et al.
JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY (2003)
Review of the present status of optical fiber sensors
B Lee
OPTICAL FIBER TECHNOLOGY (2003)
Effect of refractive index-mismatch on laser microfabrication in silica glass
A Marcinkevicius et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2003)
Control of the cross-sectional shape of a hollow microchannel embedded in photostructurable glass by use of a femtosecond laser
Y Cheng et al.
OPTICS LETTERS (2003)
Multi-level optical data storage in a photobleaching polymer using two-photon excitation under continuous wave illumination
D Ganic et al.
OPTICS AND LASERS IN ENGINEERING (2002)
Femtosecond micromachining of symmetric waveguides at 1.5 μm by astigmatic beam focusing
G Cerullo et al.
OPTICS LETTERS (2002)
A novel non-flammable electrolyte containing methyl nonafluorobutyl ether for lithium secondary batteries
J Arai
JOURNAL OF APPLIED ELECTROCHEMISTRY (2002)
Three-dimensional focal spots related to two-photon excitation
HB Sun et al.
APPLIED PHYSICS LETTERS (2002)
An efficient two-photon-generated photoacid applied to positive-tone 3D microfabrication
WH Zhou et al.
SCIENCE (2002)
Rapid sub-diffraction-limit laser micro/nanoprocessing in a threshold material system
T Tanaka et al.
APPLIED PHYSICS LETTERS (2002)
Ablation of solids by femtosecond lasers: Ablation mechanism and ablation thresholds for metals and dielectrics
EG Gamaly et al.
PHYSICS OF PLASMAS (2002)
Femtosecond laser ablation of silicon-modification thresholds and morphology
J Bonse et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2002)
Photoresist reflow method of microlens production Part II: Analytic models
FT O'Neill et al.
OPTIK (2002)
Axial birefringence in high-numerical-aperture optical systems and the light distribution close to focus
S Stallinga
JOURNAL OF THE OPTICAL SOCIETY OF AMERICA A-OPTICS IMAGE SCIENCE AND VISION (2001)
Finer features for functional microdevices - Micromachines can be created with higher resolution using two-photon absorption.
S Kawata et al.
NATURE (2001)
Submicron multiphoton free-form fabrication of proteins and polymers: Studies of reaction efficiencies and applications in sustained release
JD Pitts et al.
MACROMOLECULES (2000)