☆ 4.8 Review

Advances in Printing and Electronics: From Engagement to Commitment

ADVANCED FUNCTIONAL MATERIALS (2023)

Related references

Note: Only part of the references are listed.
Review Chemistry, Multidisciplinary

Emerging 4D Printing Strategies for Next-Generation Tissue Regeneration and Medical Devices

Yue Wang et al.

Summary: The rapid development of 3D printing has had a significant impact on the field of biomedical engineering, particularly 4D printing. While there has been progress made in the development of 4D printing for tissue scaffolds and medical devices, there are limitations in printable smart materials and achievable responses with current stimulation sources. This review highlights recent progress in 4D printing, focusing on printing mechanisms, smart ink mechanisms, structural design, and printing technologies. It also summarizes recent studies on tissue/organ regeneration and medical device applications, and discusses current challenges and future perspectives of 4D printing.

ADVANCED MATERIALS (2022)

Add to Collection
Review Chemistry, Multidisciplinary

Nanosphere Lithography: A Versatile Approach to Develop Transparent Conductive Films for Optoelectronic Applications

Tengfei Qiu et al.

Summary: Transparent conductive films (TCFs) are indispensable in optoelectronic applications, and the development of new materials that combine transparency, electrical conductivity, and variable functionality is needed. Nanomesh TCFs, with periodic or irregular structures, have emerged as promising candidates with superior mechanical properties compared to traditional metal oxide TCFs. Nanosphere lithography (NSL) is a versatile platform for fabricating nanomesh TCFs, offering a wide range of materials with diverse functions and device compatibility. This review provides a comprehensive overview of the NSL process, structure-property relationships of nanomesh TCFs, and their applications in various optoelectronic technologies.

ADVANCED MATERIALS (2022)

Add to Collection
Article Chemistry, Multidisciplinary

Defect-Free Metal Deposition on 2D Materials via Inkjet Printing Technology

Wenwen Zheng et al.

Summary: 2D materials have attractive properties for electronic device fabrication, but integrating them into commercial devices and circuits is challenging. Recent studies show that inkjet printing technology for metal deposition can prevent damage to the atomic structure of ultrathin 2D materials and maintain a sharp interface, which is crucial for the design and optimization of electronic devices and circuits.

ADVANCED MATERIALS (2022)

Add to Collection
Article Chemistry, Physical

Metallic core-shell nanoparticles for conductive coatings and printing

Anna Pajor-Swierzy et al.

Summary: The review focuses on bimetallic nanoparticles consisting of a low-cost, high electrical conductivity metal core (such as Cu and Ni) and a protective shell made of a stable, oxidation-resistant noble metal (such as Ag or Au). The synthesis methods, including chemical and physical approaches, as well as their combination, are discussed. The review also covers the stability to oxidation of the core-shell nanoparticles under various conditions, and the formulation of conductive compositions and their application in conductive coatings and printed electronics.

ADVANCES IN COLLOID AND INTERFACE SCIENCE (2022)

Add to Collection
Article Materials Science, Multidisciplinary

Ultrathin Paper Microsupercapacitors for Electronic Skin Applications

Mehmet Girayhan Say et al.

Summary: Ultrathin devices for skin-compatible medical applications and wearable electronics are rapidly developing. Thin and lightweight energy storage devices are required for powering skin-interfaced electronics. The study demonstrates the fabrication of all spray-coated symmetric microsupercapacitors (mu SCs) on ultrathin parylene C substrates using a sequential deposition. The devices exhibit long-term operation capability and mechanical robustness, and an organic electrochromic display is successfully powered as an example of fully organic wearable, skin-integrated electronic applications.

ADVANCED MATERIALS TECHNOLOGIES (2022)

Add to Collection
Article Chemistry, Analytical

Enhanced Nitrite Detection by a Carbon Screen Printed Electrode Modified with Photochemically-Made AuNPs

Malak Talbi et al.

Summary: An electrochemical sensor based on carbon screen-printed electrodes surface-modified with gold nanoparticles is proposed for sensitive detection of nitrite in water. The modified electrode shows increased surface area and improved nitrite oxidation performance. The sensor exhibits a wide linear range, high sensitivity, and low detection limit. It is capable of accurately detecting nitrite in different water matrices.

CHEMOSENSORS (2022)

Add to Collection
Review Engineering, Manufacturing

Nickel-Based Inks for Flexible Electronics - A Review on Recent Trends

Hari Murthy et al.

Summary: Inkjet printing is an efficient, simple, scalable, and low-cost additive manufacturing technique used for depositing functional materials in flexible electronic devices. Recent developments in Ni-based inks, including formulation, sintering, and properties, as well as the impact of combining Ni with other materials on film properties, have been highlighted. The study also explores the effects of ink parameters on material printing and the mechanism behind the formation of the coffee-ring effect.

JOURNAL OF ADVANCED MANUFACTURING SYSTEMS (2022)

Add to Collection
Article Nanoscience & Nanotechnology

Fabrication and Seamless Integration of Insensitive-Bending Fully Printed All-in-One Fabric-Based Supercapacitors Based on Cost-Effective MWCNT Electrodes

Lihong Jiang et al.

Summary: All-in-one fabric-based supercapacitors (FSCs) are fabricated using screen-printing technique and multiwalled carbon nanotube (MWCNT) electrodes. These FSCs exhibit better capacitive behavior, rate capability, and flexibility, making them suitable for large-scale production and wearable electronic applications.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection
Review Chemistry, Multidisciplinary

Direct Ink Writing: A 3D Printing Technology for Diverse Materials

M. A. S. R. Saadi et al.

Summary: Direct ink writing (DIW) is a versatile 3D printing technique that allows printing of a wide range of materials. This comprehensive review explores the process of DIW printing of complex 3D structures and discusses its diverse applications in various industries.

ADVANCED MATERIALS (2022)

Add to Collection
Article Polymer Science

Dielectric, structural and mechanical properties of thermally aged biaxially oriented polymeric substrates for flexible electronics

Jaroslav Hornak et al.

Summary: This study investigates the changes in thermal, dielectric, and mechanical properties of two commonly used flexible substrates for electronics, polyethylene naphthalate (PEN) and polyethylene terephthalate (PET), under accelerated thermal aging conditions. The results show that dielectric losses increase slower for PET than for PEN at lower aging temperatures, but similar behavior is observed at higher aging temperatures. The dissipation factors of PET and PEN increase by one order of magnitude during aging. Broadband dielectric spectroscopy (BDS) reveals changes in the individual dielectric relaxation mechanisms. Discoloration induced by thermal aging is primarily detected in the spectrum of PEN, while the mechanical tensile strength of PET deteriorates considerably after only a few hundred hours. These changes are primarily related to the change in the crystalline-to-amorphous phase ratio.

POLYMER DEGRADATION AND STABILITY (2022)

Add to Collection
Article Materials Science, Multidisciplinary

Vibrational spectroscopy on solution-dispersed MoS2for inkjet-printed photodetectors

Ridwan Fayaz Hossain et al.

Summary: In this study, the temperature-dependent frequency shifts and phonon lifetime of multilayer MoS2 were investigated. The semiconducting dispersion of MoS2 was integrated with graphene ink to fabricate an integrated inkjet-printed photodetector, which exhibited high photo-responsivity and conductivity in the visible regime.

EMERGENT MATERIALS (2022)

Add to Collection
Article Nanoscience & Nanotechnology

Three-Dimensional Printed Bimodal Electronic Skin with High Resolution and Breathability for Hair Growth

Shengbo Sang et al.

Summary: This study developed a 3D printed wearable electronic skin (e-skin) with breathability and the ability to promote hair growth. The e-skin achieved simultaneous pressure and temperature detection and had a high tactile resolution, making it suitable for individuals with neurological deficits. The design of the main structure was tailored for human hair distribution, and the e-skin was realized through multimaterial in situ 3D printing with high accuracy and consistency.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection
Article Chemistry, Multidisciplinary

All-Direct-Ink-Writing of Artistic Supercapacitors: Toward On-Demand Embodied Power Sources

Seong-Sun Lee et al.

Summary: This study demonstrates an easy and scalable strategy based on direct ink writing (DIW) technology for the fabrication of artistic supercapacitors (ASCs) that enable power source-unitized monolithic electronic devices with various form factors. The DIW printing technique is used to fabricate interdigitated nickel current collectors and ultrathick electrodes, and click-crosslinkable electrolyte inks are used to fill the interstitial voids between the electrode layers. The resulting ASCs are encapsulated with a waterproof packaging ink, allowing for efficient space utilization, design diversity, and dimensional scalability.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection
Article Chemistry, Analytical

Influence of Process Parameters on the Resistivity of 3D Printed Electrically Conductive Structures

Kacper Dembek et al.

Summary: This study investigates the influence of printing parameters on the resistance of 3D printed conductive structures. It finds that printing temperature and layer height have significant impacts on resistance, and controlling multiple parameters simultaneously is a challenge for designing high-efficiency structural electronics.

MICROMACHINES (2022)

Add to Collection
Review Chemistry, Physical

Printable inks and deformable electronic array devices

Selvaraj Veerapandian et al.

Summary: This review article provides a brief introduction to the technological challenges and recent research advances in deformable printed electronic array devices, including printing methods and ink formation. It also describes successful printing strategies and device demonstrations, as well as pointing out the challenges and future directions for these technologies.

NANOSCALE HORIZONS (2022)

Add to Collection
Review Nanoscience & Nanotechnology

Printed graphene and hybrid conductive inks for flexible, stretchable, and wearable electronics: Progress, opportunities, and challenges

Y. Z. N. Htwe et al.

Summary: Printed wearable electronics are vital in the electronics industry, and there is an increasing demand for them. However, challenges such as the use of toxic chemicals, low throughput, and complicated fabrication processes still persist. Graphene-based conductive ink has excellent electrical conductivity but faces issues with stability, dispersion in water, and annealing temperature. Hybrid inks combining graphene with metal nanoparticles or conductive polymers are being explored. This review focuses on flexible and stretchable electronics, conductive inks based on graphene and their hybrids, solvent and water-based formulations, printing methods, post-printing techniques, and different substrates used in wearable electronics. The challenges in fabricating printed wearable electronics and recommendations for future research are also discussed.

JOURNAL OF SCIENCE-ADVANCED MATERIALS AND DEVICES (2022)

Add to Collection
Article Materials Science, Multidisciplinary

Hybrid 3D/Inkjet-Printed Organic Neuromorphic Transistors

Tanyaradzwa N. Mangoma et al.

Summary: Organic electrochemical transistors (OECTs) are essential in bioelectronics and printed electronics applications due to their simple structure, ease of tunability, biocompatibility, and suitability for different fabrication routes. This study presents a hybrid direct-write additive manufacturing approach to fabricating OECTs, combining 3D printing of conducting and insulating layers with inkjet printing of semiconducting thin films. The results demonstrate that this manufacturing method can rapidly produce OECTs and neuromorphic devices with good performance.

ADVANCED MATERIALS TECHNOLOGIES (2022)

Add to Collection
Article Engineering, Manufacturing

Arduino-based low-cost electrical load tracking system with a long-range mesh network

Xin-Lin Wang et al.

Summary: The proposed system combines the advantages of LoRa communication method and mesh network structure, reducing data loss in far-field wireless energy monitoring. It automatically controls node functions and adjusts system structure in real-time, improving energy monitoring quality and sustainability with standby equipment.

ADVANCES IN MANUFACTURING (2021)

Add to Collection
Review Green & Sustainable Science & Technology

Energy-based industrial symbiosis: a literature review for circular energy transition

Luca Fraccascia et al.

Summary: Industrial symbiosis is considered a key strategy to support the transition towards a circular economy, with a focus on reducing energy demand and traditional fuel usage in energy production. Through a literature review, three categories of symbiotic synergies have been identified: energy cascade, fuel replacement, and bioenergy production. Additionally, drivers, barriers, and enablers of business development in energy-based industrial symbiosis have been discussed from various perspectives.

ENVIRONMENT DEVELOPMENT AND SUSTAINABILITY (2021)

Add to Collection
Article Materials Science, Multidisciplinary

Flexible Active Matrix Addressed Displays Manufactured by Screen Printing

Peter Andersson Ersman et al.

Summary: A flexible, electrochromic, active matrix addressed display (AMAD) is demonstrated, manufactured on a plastic substrate solely using screen printing. Each organic electrochromic smart pixel (OESP) is a combination of an organic electrochromic display (OECD) and an organic electrochemical transistor (OECT), printed in multilayered vertical architectures. The conduction state of the OECT enables control of the color state of its corresponding OECD, while electrical wires connecting each component are formed by screen printing with silver or nanocopper-based ink.

ADVANCED ENGINEERING MATERIALS (2021)

Add to Collection
Article Nanoscience & Nanotechnology

Residual-Solvent-Induced Morphological Transformation by Intense Pulsed Light on Spin-Coated and Inkjet-Printed ZnO NP Films for Quantum-Dot Light-Emitting Diodes

Young Joon Han et al.

Summary: The study found that different film-formation methods can affect the optimal annealing temperature for zinc oxide nanoparticle electron transport layer under intense pulsed light conditions. Spin-coated and inkjet-printed ZnO NP ETLs exhibit different surface morphologies after IPL post-treatment.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection
Article Nanoscience & Nanotechnology

Organic Photovoltaics Printed via Sheet Electrospray Enabled by Quadrupole Electrodes

Kai Chang et al.

Summary: The study introduced a quadrupole electrode to compress the conical electrospray profile into a thin sheet, effectively increasing the long axis to short axis ratio of the oval spray footprint. This resulted in droplets being closer to each other and more likely to merge after deposition, reducing individual coffee rings and improving the flatness of the active layer. As a result, the power conversion efficiency (PCE) of devices with a PM6:N3 active layer printed by the sheet electrospray reached up to 15.98%, showing a noticeable improvement over traditional conical electrospray methods.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection
Article Nanoscience & Nanotechnology

Electrohydrodynamic-Jet-Printed Cinnamate-Fluorinated Cross-Linked Polymeric Dielectrics for Flexible and Electrically Stable Operating Organic Thin-Film Transistors and Integrated Devices

Xiaowu Tang et al.

Summary: In this study, printable polymer series were synthesized and used as gate dielectrics for OTFTs. The effect of different polymer types on the driving stability of OTFTs was analyzed, with PFS-co-PVBCi (3:7) showing the best performance under continuous bias stress with almost negligible Vth shift. This research successfully implemented flexible OTFT and logic devices using printed PFS-co-PVBCi (3:7) dielectrics with stable operation properties.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection
Article Materials Science, Multidisciplinary

All-Printed Smart Label with Integrated Humidity Sensors and Power Supply

Nelson Pereira et al.

Summary: This study introduces a smart label with integrated humidity sensor and printed battery, consisting of four subsystems, using screen printing technology and exhibiting linear response. The printed battery utilizes lithium iron phosphate as an active cathode material, with six single cells connected in series.

ADVANCED ENGINEERING MATERIALS (2021)

Add to Collection
Review Chemistry, Multidisciplinary

MODs vs. NPs: Vying for the Future of Printed Electronics

Samuel P. Douglas et al.

Summary: This Minireview compares two distinct ink types, MOD and NP formulations, for printing highly conductive elements like silver, copper, and aluminium. The review discusses the historical use of NP formulations in printing and the rise of MOD inks which have expanded the range of printable compounds while addressing shelf life and sintering issues. Additionally, the review delves into the challenges and outlook for market leaders like silver and copper, as well as the emerging field of aluminium inks.

CHEMISTRY-A EUROPEAN JOURNAL (2021)

Add to Collection
Article Engineering, Environmental

Fabricating efficient flexible organic photovoltaics using an eco-friendly cellulose nanofibers/silver nanowires conductive substrate

Po-Chen Lin et al.

Summary: In this study, a highly transparent and flexible conductive substrate based on eco-friendly cellulose nanofibers embedded with silver nanowires was successfully developed. The substrate exhibits low sheet resistance, high optical transparency, low coefficient of thermal expansion, and good mechanical stability, comparable to commercial products. It shows potential for sustainable flexible conductive substrates in organic electronics applications.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection
Review Chemistry, Multidisciplinary

Chemistry in Superconductors

Xin Gui et al.

Summary: This review highlights important superconducting families, their crystal structure, chemical bonding, and superconductivity correlations, emphasizing on the use of chemical approaches in the discovery of new superconductors. It also provides technical strategies for synthesizing superconductors and outlines the important role of chemists in reporting and studying new superconductors in the field of superconductivity.

CHEMICAL REVIEWS (2021)

Add to Collection
Article Materials Science, Multidisciplinary

Characterization of TiO2 Nanoparticle-Reinforced Polymer Nanocomposite Materials Printed by Stereolithography Method

Ismail Aktitiz et al.

Summary: Additive manufacturing revolutionizes material production processes, with methods like SLA standing out for their dimensional sensitivity. Adding TiO2 nanoparticles to photosensitive resin can enhance the mechanical properties of 3D polymer structures, as observed in this study.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)

Add to Collection
Article Chemistry, Applied

Eco-friendly flexographic ink from fluorene-based Schiff base pigment for anti-counterfeiting and printed electronics applications

Kashmitha Muthamma et al.

Summary: The study introduces the use of FBH pigment for eco-friendly flexographic ink, which displayed bluish-green fluorescence under UV light, making it suitable for security printing and flexible printed electronics. The ink formulation also showed excellent covert performance, especially with invisible fingerprint detection for forgery prevention.

PROGRESS IN ORGANIC COATINGS (2021)

Add to Collection
Article Chemistry, Analytical

Synthesis of Printable Polyvinyl Alcohol for Aerosol Jet and Inkjet Printing Technology

Mahmuda Akter Monne et al.

Summary: The study demonstrates the synthesis and application of PVA solutions, as well as its potential use as sacrificial material in micro-electro-mechanical systems. The research shows that PVA has excellent potential in printed or traditional transistor fabrication, with a dielectric constant of 168 at 100 kHz.

MICROMACHINES (2021)

Add to Collection
Review Chemistry, Multidisciplinary

Chiral Graphene Hybrid Materials: Structures, Properties, and Chiral Applications

Biao Zhao et al.

Summary: Chirality and graphene have become important research subjects with the potential to create unique functional materials and discoveries when combined. This overview paper aims to fill the gap in summarizing developments in chiral materials developed from graphene and their derivatives, while also discussing future directions and challenges.

ADVANCED SCIENCE (2021)

Add to Collection
Article Nanoscience & Nanotechnology

Selectively Metalizable Stereolithography Resin for Three-Dimensional DC and High-Frequency Electronics via Hybrid Additive Manufacturing

Ji Li et al.

Summary: Direct manufacturing of customized end-use electronic products through additive manufacturing is a growing trend. A novel hybrid additive manufacturing solution that combines traditional AM processes with SLA 3D printing and laser-activated electroless plating has been proposed, enabling the creation of 3D fully functional electronic products with high-resolution circuitry and high-performance electrical materials.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection
Review Chemistry, Multidisciplinary

Droplet-Based Techniques for Printing of Functional Inks for Flexible Physical Sensors

Horned Abdolmaleki et al.

Summary: Printed electronics is a promising technology that uses functional inks to print electrical components on various substrates, enabling the fabrication of flexible and form-fitting devices. Droplet-based printing technologies, utilizing nanomaterial inks, are of particular interest due to their high resolution and production flexibility. Research focuses on developing functional inks and creating physical sensors using these techniques.

ADVANCED MATERIALS (2021)

Add to Collection
Review Environmental Sciences

A review on algal-bacterial symbiotic system for effective treatment of wastewater

A. Saravanan et al.

Summary: Industrialization and urbanization lead to water contamination, and utilizing the symbiotic relationship between algae and bacteria can efficiently remove toxic contaminants and improve wastewater treatment efficiency.

CHEMOSPHERE (2021)

Add to Collection
Article Chemistry, Physical

Surface functionalized inorganic phosphor by grafting organic antenna for long term preservation of latent fingerprints and data-security applications

K. N. Narasimhamurthy et al.

Summary: The study fabricated Gd2O3:Eu3+ (5 mol %) nanopowders for long term preservation and visualization of fingerprints, as well as printing. By grafting organic molecule, the enhancement of photoluminescence was successfully achieved, leading to high stability in fingerprint development for the prepared nanocomposites.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Add to Collection
Article Materials Science, Ceramics

Fully inkjet-printed BaTiO3 capacitive humidity sensor: Microstructural engineering of the humidity sensing layer using bimodal ink

Frances Danielle M. Fernandez et al.

Summary: This paper introduces a novel technique to enhance the sensing performance of humidity sensors by modifying the microstructure of BaTiO3 humidity sensing layers through optimizing the mixing ratios of bimodal inks deposited by inkjet printing. The optimized sensor achieved high sensitivity, good repeatability, linearity, response and recovery time, low hysteresis, and stability over time, making it suitable for various applications.

CERAMICS INTERNATIONAL (2021)

Add to Collection
Article Engineering, Environmental

Flexible, all-hydrogel supercapacitor with self-healing ability

Yongliang Zou et al.

Summary: The study presents an all-hydrogel supercapacitor with high electric conductivity, large specific capacitance, great toughness and self-healing ability. It can maintain stable energy output even after being subjected to various deformations and can self-heal within 4 hours. The supercapacitor is a promising smart storage device for wearable applications.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection
Article Economics

What are the challenges and opportunities in implementing Taiwan's aquavoltaics policy? A roadmap for achieving symbiosis between small-scale aquaculture and photovoltaics

Yao-Jen Hsiao et al.

Summary: The Taiwan government introduced the aquavoltaics policy to enhance the benefits of the aquaculture industry, but it received mixed views from different stakeholders. The research aims to facilitate the integration of various opinions and help the aquaculture industry achieve sustainable development.

ENERGY POLICY (2021)

Add to Collection
Article Instruments & Instrumentation

3D-printed liquid metal-based stretchable conductors and pressure sensors

Thassyo Pinto et al.

Summary: The study introduces a rapid-manufacturing technique using a PolyJet 3D printer to create soft microfluidic substrates embedded with liquid metals for fabricating stretchable conductors and pressure sensors. This novel method allows for simultaneous 3D printing of multiple spiral-shaped soft pressure sensors in minutes. Experimental results demonstrate that the 3D-printed microfluidic pressure sensors are robust and capable of withstanding high pressures.

SMART MATERIALS AND STRUCTURES (2021)

Add to Collection
Review Chemistry, Multidisciplinary

Recent progress for silver nanowires conducting film for flexible electronics

Lu Zhang et al.

Summary: Conducting films based on silver nanowires (AgNWs) have various assembly methods, including printing, coating, vacuum filtration, template-assisted assembly, electrospinning, and gelating, each with its advantages.

JOURNAL OF NANOSTRUCTURE IN CHEMISTRY (2021)

Add to Collection
Article Engineering, Electrical & Electronic

IoT in Smart Cities: A Survey of Technologies, Practices and Challenges

Abbas Shah Syed et al.

Summary: The Internet of Things (IoT) plays a crucial role in developing smart cities by integrating various devices and technologies. It enables sustainable living, increased comfort, and productivity for citizens by facilitating interactions between different technologies. The IoT for Smart Cities encompasses diverse domains and relies on underlying systems, architectures, networking technologies, and artificial algorithms in order to operate effectively.

SMART CITIES (2021)

Add to Collection
Review Chemistry, Multidisciplinary

Magnetic materials: a journey from finding north to an exciting printed future

K. J. Merazzo et al.

Summary: The potential of printed magnetoactive smart materials, which can be changed by external magnetic fields, is recognized globally. However, the printing of these materials is still in its early stages, facing challenges in design, material sets, and fabrication procedures. The review aims to discuss the integration of printing technologies with magnetoactive materials, highlighting scientific obstacles and proposing ways to overcome limitations for wider application.

MATERIALS HORIZONS (2021)

Add to Collection
Article Crystallography

Inkjet printing PVP dielectric for flexible thin film transistor

Tao Hong et al.

Summary: PVP dielectric film prepared by inkjet printing process shows promising performance after annealing at 200 degrees C, indicating its potential application in flexible electronics.

CHINESE JOURNAL OF LIQUID CRYSTALS AND DISPLAYS (2021)

Add to Collection
Article Engineering, Electrical & Electronic

A Novel Passive Circuit Emulator for a Current-Controlled Memristor

Leonardo Barboni

Summary: This study introduces a novel circuit realization of a passive current-controlled inductorless emulator, addressing the lack of passive current-controlled memristor devices and providing potential applications in more sophisticated circuits.

ACTIVE AND PASSIVE ELECTRONIC COMPONENTS (2021)

Add to Collection
Article Engineering, Electrical & Electronic

Fully printed origami thermoelectric generators for energy-harvesting

Andres Georg Roesch et al.

Summary: Researchers have developed a fully screen printed flexible origami TEG using printable thermoelectric polymers and composite materials, which can harvest energy from low-temperature environmental heat. They achieved high power output and thermal impedance matching, demonstrating a wireless energy-harvesting application.

NPJ FLEXIBLE ELECTRONICS (2021)

Add to Collection
Review Chemistry, Multidisciplinary

A Review of Low-Temperature Solution-Processed Metal Oxide Thin-Film Transistors for Flexible Electronics

Jeong Woo Park et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection
Review Chemistry, Multidisciplinary

A New Frontier of Printed Electronics: Flexible Hybrid Electronics

Yasser Khan et al.

ADVANCED MATERIALS (2020)

Add to Collection
Article Chemistry, Multidisciplinary

Well-Controlled Decomposition of Copper Complex Inks Enabled by Metal Nanowire Networks for Highly Compact, Conductive, and Flexible Copper Films

Bowen Zhang et al.

ADVANCED MATERIALS INTERFACES (2020)

Add to Collection
Article Biochemical Research Methods

Microfluidic opportunities in printed electrolyte-gated transistor biosensors

Kevin D. Dorfman et al.

BIOMICROFLUIDICS (2020)

Add to Collection
Article Materials Science, Ceramics

3D printing of ceramics and graphene circuits-on-ceramics by thermal bubble inkjet technology and high temperature sintering

Zheguan Huang et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection
Review Automation & Control Systems

A review on 3D printed matrix polymer composites: its potential and future challenges

Jabran Saroia et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

Add to Collection
Article Chemistry, Physical

Fabrication of single-crystalline gold nanowires on cellulose nanofibers

Hui He et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2020)

Add to Collection
Article Engineering, Electrical & Electronic

Highly Conductive Graphene Electronics by Inkjet Printing

Dongbin Zhu et al.

JOURNAL OF ELECTRONIC MATERIALS (2020)

Add to Collection
Article Biochemistry & Molecular Biology

Inkjet-Printed Molybdenum Disulfide and Nitrogen-Doped Graphene Active Layer High On/Off Ratio Transistors

Mohi Uddin Jewel et al.

MOLECULES (2020)

Add to Collection
Article Chemistry, Analytical

Inkjet-Printing of Nanoparticle Gold and Silver Ink on Cyclic Olefin Copolymer for DNA-Sensing Applications

Martin Trotter et al.

SENSORS (2020)

Add to Collection
Review Chemistry, Physical

Printed Electronics as Prepared by Inkjet Printing

Vimanyu Beedasy et al.

MATERIALS (2020)

Add to Collection
Article Engineering, Multidisciplinary

Spray-printed magnetoelectric multifunctional composites

P. Martins et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection
Article Materials Science, Multidisciplinary

Superconducting HfO2-YBa2Cu3O7-δ Nanocomposite Films Deposited Using Ink-Jet Printing of Colloidal Solutions

Hannes Rijckaert et al.

COATINGS (2020)

Add to Collection
Article Engineering, Electrical & Electronic

Investigation of the Performance of Poly(Methyl-Acrylate) as a Gate Dielectric in Organic Thin-Film Transistors

Tayfun Yardim et al.

JOURNAL OF ELECTRONIC MATERIALS (2020)

Add to Collection
Article Chemistry, Multidisciplinary

Paper-Based Batteries as Conductivity Sensors for Single-Use Applications

Laura Ortega et al.

ACS SENSORS (2020)

Add to Collection
Review Energy & Fuels

Overview of printing and coating techniques in the production of organic photovoltaic cells

Priscila Goncalves Vasconcelos Sampaio et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2020)

Add to Collection
Article Chemistry, Physical

Recent advances and future challenges in printed batteries

C. M. Costa et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection
Article Chemistry, Physical

3D-printed highly deformable electrodes for flexible lithium ion batteries

Yinhua Bao et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection
Article Engineering, Environmental

Electronic biopolymers: From molecular engineering to functional devices

Xiaoqian Li et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection
Review Chemistry, Physical

Advanced Nanomaterials, Printing Processes, and Applications for Flexible Hybrid Electronics

Sehyun Park et al.

MATERIALS (2020)

Add to Collection
Article Nanoscience & Nanotechnology

An advanced folded piezoelectric vibration energy harvester with low resonant frequency and high power density

Chunkang Shi et al.

AIP ADVANCES (2020)

Add to Collection
Article Automation & Control Systems

Automated fabrication of hybrid printed electronic circuits

Ulrich Gengenbach et al.

MECHATRONICS (2020)

Add to Collection
Article Engineering, Environmental

Energy and water saving potentials in industrial parks by an infrastructure-integrated symbiotic model

Wanqiu Hu et al.

RESOURCES CONSERVATION AND RECYCLING (2020)

Add to Collection
Article Multidisciplinary Sciences

Printed, flexible, compact UHF-RFID sensor tags enabled by hybrid electronics

Carol L. Baumbauer et al.

SCIENTIFIC REPORTS (2020)

Add to Collection
Review Chemistry, Analytical

Screen-Printed Electrode-Based Sensors for Food Spoilage Control: Bacteria and Biogenic Amines Detection

Ricarda Torre et al.

BIOSENSORS-BASEL (2020)

Add to Collection
Review Engineering, Electrical & Electronic

Recent developments of advanced micro-supercapacitors: design, fabrication and applications

Fan Bu et al.

NPJ FLEXIBLE ELECTRONICS (2020)

Add to Collection
Article Chemistry, Multidisciplinary

Formulation of a graft polymer-containing aqueous yellow ceramic ink for digital ink-jet printing

Ji-Hyeon Lee et al.

RSC ADVANCES (2020)

Add to Collection
Article Engineering, Electrical & Electronic

All-Printed Piezoresistive Sensor Matrix with Organic Thin-Film Transistors as a Switch for Crosstalk Reduction

Vitor Correia et al.

ACS APPLIED ELECTRONIC MATERIALS (2020)

Add to Collection
Article Chemistry, Multidisciplinary

Inkjet-printed graphene Hall mobility measurements and low-frequency noise characterization

Gabriele Calabrese et al.

NANOSCALE (2020)

Add to Collection
Article Chemistry, Physical

Roll-to-roll slot-die coated P-I-N perovskite solar cells using acetonitrile based single step perovskite solvent system

Daniel Burkitt et al.

SUSTAINABLE ENERGY & FUELS (2020)

Add to Collection
Review Materials Science, Multidisciplinary

Recent progress in silver nanowire networks for flexible organic electronics

Wenting Li et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

Add to Collection
Review Chemistry, Multidisciplinary

Recent advances in printable thermoelectric devices: materials, printing techniques, and applications

Md Sharafat Hossain et al.

RSC ADVANCES (2020)

Add to Collection
Article Chemistry, Physical

Batteries with high theoretical energy densities

Wenzhuo Cao et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection
Review Electrochemistry

Review-Inkjet Printing of Metal Structures for Electrochemical Sensor Applications

Yongkun Sui et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Add to Collection
Article Materials Science, Composites

Selective laser sintering of copper filled polyamide 12: Characterization of powder properties and process behavior

Lydia Lanzl et al.

POLYMER COMPOSITES (2019)

Add to Collection
Article Engineering, Electrical & Electronic

Application of Gold Powder Made from Gold Leaf for Conductive Inks

Sayaka Yamashita et al.

IEICE TRANSACTIONS ON ELECTRONICS (2019)

Add to Collection
Review Nanoscience & Nanotechnology

Printed flexible and transparent electronics: enhancing low-temperature processed metal oxides with 0D and 1D nanomaterials

William Scheideler et al.

NANOTECHNOLOGY (2019)

Add to Collection
Review Microbiology

The role of microbial motility and chemotaxis in symbiosis

Jean-Baptiste Raina et al.

NATURE REVIEWS MICROBIOLOGY (2019)

Add to Collection
Article Materials Science, Multidisciplinary

A highly bendable transparent electrode for organic electrochromic devices

Boyang Che et al.

ORGANIC ELECTRONICS (2019)

Add to Collection
Review Materials Science, Multidisciplinary

Printing Conductive Nanomaterials for Flexible and Stretchable Electronics: A Review of Materials, Processes, and Applications

Qijin Huang et al.

ADVANCED MATERIALS TECHNOLOGIES (2019)

Add to Collection
Article Nanoscience & Nanotechnology

Moire-Free Imperceptible and Flexible Random Metal Grid Electrodes with Large Figure-of-Merit by Photonic Sintering Control of Copper Nanoparticles

Jinwook Jung et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection
Article Chemistry, Multidisciplinary

Screen-Printed Soft Capacitive Sensors for Spatial Mapping of Both Positive and Negative Pressures

Hongyang Shi et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection
Review Biochemistry & Molecular Biology

Silver Nanoparticles Based Ink with Moderate Sintering in Flexible and Printed Electronics

Lixin Mo et al.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2019)

Add to Collection
Review Engineering, Electrical & Electronic

Recent Development of Graphene-Based Ink and Other Conductive Material-Based Inks for Flexible Electronics

D. S. Saidina et al.

JOURNAL OF ELECTRONIC MATERIALS (2019)

Add to Collection
Review Materials Science, Multidisciplinary

Stretchable electronics: functional materials, fabrication strategies and applications

Wei Wu

SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2019)

Add to Collection
Review Chemistry, Analytical

Powering the Environmental Internet of Things

Joshua Curry et al.

SENSORS (2019)

Add to Collection
Review Materials Science, Multidisciplinary

Influence of sintering methods on the mechanical properties of aluminium nanocomposites reinforced with carbonaceous compounds: A review

Mary A. Awotunde et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

Add to Collection
Review Materials Science, Multidisciplinary

Parametric review of microwave-based materials processing and its applications

Praveen Kumar Loharkar et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

Add to Collection
Article Nanoscience & Nanotechnology

Highly Sensitive and Stretchable Polyurethane Fiber Strain Sensors with Embedded Silver Nanowires

Guan-Jun Zhu et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection
Article Chemistry, Multidisciplinary

Highly Stretchable Metallic Nanowire Networks Reinforced by the Underlying Randomly Distributed Elastic Polymer Nanofibers via Interfacial Adhesion Improvement

Zhi Jiang et al.

ADVANCED MATERIALS (2019)

Add to Collection
Review Materials Science, Multidisciplinary

Chemistry of solid metal-based inks and pastes for printed electronics - A review

Clara Cano-Raya et al.

APPLIED MATERIALS TODAY (2019)

Add to Collection
Article Nanoscience & Nanotechnology

Screen-Printing of a Highly Conductive Graphene Ink for Flexible Printed Electronics

Pei He et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection
Article Chemistry, Physical

Cinnamate-Functionalized Natural Carbohydrates as Photopatternable Gate Dielectrics for Organic Transistors

Zhi Wang et al.

CHEMISTRY OF MATERIALS (2019)

Add to Collection
Review Materials Science, Multidisciplinary

Flexible and printed organic transistors: From materials to integrated circuits

Hiroyuki Matsui et al.

ORGANIC ELECTRONICS (2019)

Add to Collection
Article Chemistry, Multidisciplinary

Flexible, Print-in-Place 1D-2D Thin-Film Transistors Using Aerosol Jet Printing

Shiheng Lu et al.

ACS NANO (2019)

Add to Collection
Article Biotechnology & Applied Microbiology

Combined Chemical and Thermal Sintering for High Conductivity Inkjet-printed Silver Nanoink on Flexible Substrates

I. Ivanisevic et al.

CHEMICAL AND BIOCHEMICAL ENGINEERING QUARTERLY (2019)

Add to Collection
Article Chemistry, Physical

Remarkable performance improvement of copper phthalocyanine organic field-effect transistors with polymeric bilayer gate insulator

Xueqiang Liu et al.

CHEMICAL PHYSICS LETTERS (2019)

Add to Collection
Review Multidisciplinary Sciences

Wearable flexible sweat sensors for healthcare monitoring: a review

Michael Chung et al.

JOURNAL OF THE ROYAL SOCIETY INTERFACE (2019)

Add to Collection
Article Multidisciplinary Sciences

All-printed large-scale integrated circuits based on organic electrochemical transistors

Peter Andersson Ersman et al.

NATURE COMMUNICATIONS (2019)

Add to Collection
Article Nanoscience & Nanotechnology

A Simple, Low Cost Ink System for Drop-on-Demand Printing High Performance Metal Oxide Dielectric Film at Low Temperature

Zhennan Zhu et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection
Review Multidisciplinary Sciences

A Review of Printable Flexible and Stretchable Tactile Sensors

Kirthika Senthil Kumar et al.

RESEARCH (2019)

Add to Collection
Review Chemistry, Physical

Recent progress in printed flexible solid-state supercapacitors for portable and wearable energy storage

Li Liu et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection
Article Materials Science, Multidisciplinary

Investigation on the surface modification of TiO2 nanohexagon arrays based photoanode with SnO2 nanoparticles for highly-efficient dye-sensitized solar cells

Hafiz Muhammad Asif Javed et al.

MATERIALS RESEARCH BULLETIN (2019)

Add to Collection
Review Nanoscience & Nanotechnology

Solution-processed thin films of semiconducting carbon nanotubes and their application to soft electronics

Ja Hoon Koo et al.

NANOTECHNOLOGY (2019)

Add to Collection
Article Materials Science, Multidisciplinary

Highly stable flexible organic field-effect transistors with Parylene-C gate dielectrics on a flexible substrate

Hyeok-jin Kwon et al.

ORGANIC ELECTRONICS (2019)

Add to Collection
Article Engineering, Industrial

Exploring Industry 4.0 technologies to enable circular economy practices in a manufacturing context A business model proposal

Daniel Luiz Mattos Nascimento et al.

JOURNAL OF MANUFACTURING TECHNOLOGY MANAGEMENT (2019)

Add to Collection
Article Nanoscience & Nanotechnology

Intense Pulsed Light Annealing Process of Indium-Gallium-Zinc-Oxide Semiconductors via Flash White Light Combined with Deep-UV and Near-Infrared Drying for High-Performance Thin-Film Transistors

Chang-Jin Moon et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection
Article Chemistry, Multidisciplinary

A Dynamic Graphene Oxide Network Enables Spray Printing of Colloidal Gels for High-Performance Micro-Supercapacitors

Zhiyuan Xiong et al.

ADVANCED MATERIALS (2019)

Add to Collection
Article Computer Science, Information Systems

Nondestructive Measurement of Conformal Coating Thickness on Printed Circuit Board With Ultra-High Resolution Optical Coherence Tomography

Xiao Shao et al.

IEEE ACCESS (2019)

Add to Collection
Article Materials Science, Multidisciplinary

All-printed, low-cost, tunable sensing range strain sensors based on Ag nanodendrite conductive inks for wearable electronics

Bin Tian et al.

JOURNAL OF MATERIALS CHEMISTRY C (2019)

Add to Collection
Article Materials Science, Multidisciplinary

All-printed multilayer materials with improved magnetoelectric response

A. C. Lima et al.

JOURNAL OF MATERIALS CHEMISTRY C (2019)

Add to Collection
Review Chemistry, Multidisciplinary

Printed supercapacitors: materials, printing and applications

Yi-Zhou Zhang et al.

CHEMICAL SOCIETY REVIEWS (2019)

Add to Collection
Article Engineering, Electrical & Electronic

A Fully Printed Ultra-Thin Charge Amplifier for On-Skin Biosignal Measurements

Mika-Matti Laurila et al.

IEEE JOURNAL OF THE ELECTRON DEVICES SOCIETY (2019)

Add to Collection
Review Materials Science, Multidisciplinary

Metal particle-free inks for printed flexible electronics

Wendong Yang et al.

JOURNAL OF MATERIALS CHEMISTRY C (2019)

Add to Collection
Review Chemistry, Multidisciplinary

Conductive nanomaterials for 2D and 3D printed flexible electronics

Alexander Kamyshny et al.

CHEMICAL SOCIETY REVIEWS (2019)

Add to Collection
Review Chemistry, Multidisciplinary

Towards establishing standard performance metrics for batteries, supercapacitors and beyond

Abolhassan Noori et al.

CHEMICAL SOCIETY REVIEWS (2019)

Add to Collection
Article Engineering, Electrical & Electronic

Ink-jet printed transparent and flexible electrodes based on silver nanoparticles

Gul Hassan et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2018)

Add to Collection
Article Chemistry, Multidisciplinary

Direct Inkjet Printing of TIPS-Pentacene Single Crystals onto Interdigitated Electrodes by Chemical Confinement

Giulio Pipan et al.

ADVANCED MATERIALS INTERFACES (2018)

Add to Collection
Review Chemistry, Multidisciplinary

Printed Electronics Based on Inorganic Semiconductors: From Processes and Materials to Devices

Suresh Kumar Garlapati et al.

ADVANCED MATERIALS (2018)

Add to Collection
Article Materials Science, Ceramics

Chemical sintering of TiO2 based photoanode for efficient dye sensitized solar cells using Zn nanoparticles

Muhammad Shakeel Ahmad et al.

CERAMICS INTERNATIONAL (2018)

Add to Collection
Article Chemistry, Physical

Weathering barrier enhancement of printed circuit board by fluorinated silica based superhydrophobic coating

Shan Wan et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2018)

Add to Collection
Review Engineering, Multidisciplinary

Additive manufacturing (3D printing): A review of materials, methods, applications and challenges

Tuan D. Ngo et al.

COMPOSITES PART B-ENGINEERING (2018)

Add to Collection
Article Chemistry, Physical

Tailoring metal oxide nanoparticle dispersions for inkjet printing

J. S. Gebauer et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2018)

Add to Collection
Article Physics, Applied

Development of plasma-assisted inkjet printing and demonstration for direct printing of conductive silver line

Masanao Tsumaki et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2018)

Add to Collection
Article Materials Science, Multidisciplinary

Additive manufacturing: scientific and technological challenges, market uptake and opportunities

Syed A. M. Tofail et al.

MATERIALS TODAY (2018)

Add to Collection
Article Nanoscience & Nanotechnology

Synthesis of oxide-free aluminum nanoparticles for application to conductive film

Yung Jong Lee et al.

NANOTECHNOLOGY (2018)

Add to Collection
Review Instruments & Instrumentation

Inkjet printing for the fabrication of flexible/stretchable wearable electronic devices and sensors

Alaaldeen Al-Halhouli et al.

SENSOR REVIEW (2018)

Add to Collection
Article Engineering, Manufacturing

Design and fabrication of multilayer inkjet-printed passive components for printed electronics circuit development

V. Correia et al.

JOURNAL OF MANUFACTURING PROCESSES (2018)

Add to Collection
Article Materials Science, Multidisciplinary

Room-Temperature Plasma-Assisted Inkjet Printing of Highly Conductive Silver on Paper

Caroline E. Knapp et al.

ADVANCED MATERIALS TECHNOLOGIES (2018)

Add to Collection
Article Chemistry, Multidisciplinary

Emission Area Patterning of Organic Light-Emitting Diodes (OLEDs) via Printed Dielectrics

Donggeon Han et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Add to Collection
Article Engineering, Electrical & Electronic

High capacity organic memory structures based on PVP as the insulating layer

Sundes Fakher et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2018)

Add to Collection
Article Chemistry, Multidisciplinary

A photonic sintering derived Ag flake/nanoparticle-based highly sensitive stretchable strain sensor for human motion monitoring

Inhyuk Kim et al.

NANOSCALE (2018)

Add to Collection
Article Multidisciplinary Sciences

Selective laser sintering of inkjet-printed silver nanoparticle inks on paper substrates to achieve highly conductive patterns

Enkeleda Balliu et al.

SCIENTIFIC REPORTS (2018)

Add to Collection
Article Engineering, Manufacturing

3D Printing of Structured Nanotitania Catalysts: A Novel Binder-Free and Low-Temperature Chemical Sintering Method

Ander Elkoro et al.

3D PRINTING AND ADDITIVE MANUFACTURING (2018)

Add to Collection
Article Chemistry, Physical

Network-Stabilized Bulk Heterojunction Organic Photovoltaics

Jorge Wu Mok et al.

CHEMISTRY OF MATERIALS (2018)

Add to Collection
Article Nanoscience & Nanotechnology

In-Place Printing of Carbon Nanotube Transistors at Low Temperature

Jorge A. Cardenas et al.

ACS APPLIED NANO MATERIALS (2018)

Add to Collection
Article Nanoscience & Nanotechnology

Silica Nanoparticle-Induced Structural Reorganizations in Pulmonary Surfactant Films: What Monolayer Compression Isotherms Do Not Say

Olga Borozenko et al.

ACS APPLIED NANO MATERIALS (2018)

Add to Collection
Article Engineering, Manufacturing

Printed Wheatstone bridge with embedded polymer based piezoresistive sensors for strain sensing applications

H. F. Castro et al.

ADDITIVE MANUFACTURING (2018)

Add to Collection
Review Materials Science, Multidisciplinary

Stretchable metal films

Sara S. Mechael et al.

FLEXIBLE AND PRINTED ELECTRONICS (2018)

Add to Collection
Review Engineering, Manufacturing

Polymer-based smart materials by printing technologies: Improving application and integration

J. Oliveira et al.

ADDITIVE MANUFACTURING (2018)

Add to Collection
Article Materials Science, Multidisciplinary

Liquid PMMA: A High Resolution Polymethylmethacrylate Negative Photoresist as Enabling Material for Direct Printing of Microfluidic Chips

Frederik Kotz et al.

ADVANCED ENGINEERING MATERIALS (2018)

Add to Collection
Article Chemistry, Multidisciplinary

Recent Progress on Stretchable Electronic Devices with Intrinsically Stretchable Components

Tran Quang Trung et al.

ADVANCED MATERIALS (2017)

Add to Collection
Article Chemistry, Multidisciplinary

Recent Progress in the Development of Printed Thin-Film Transistors and Circuits with High-Resolution Printing Technology

Kenjiro Fukuda et al.

ADVANCED MATERIALS (2017)

Add to Collection
Article Engineering, Electrical & Electronic

Inkjet-Printed In-Ga-Zn Oxide Thin-Film Transistors with Laser Spike Annealing

Hang Huang et al.

JOURNAL OF ELECTRONIC MATERIALS (2017)

Add to Collection
Article Engineering, Electrical & Electronic

Ultraviolet-assisted annealing for low-temperature solution-processed p-type gallium tin oxide (GTO) transparent semiconductor thin films

Chien-Yie Tsay et al.

MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2017)

Add to Collection
Article Nanoscience & Nanotechnology

Chemical sintering of direct-written silver nanowire flexible electrodes under room temperature

Zhuang Hui et al.

NANOTECHNOLOGY (2017)

Add to Collection
Editorial Material Multidisciplinary Sciences

MATERIALS SCIENCE Screen printing of 2D semiconductors

Young Duck Kim et al.

NATURE (2017)

Add to Collection
Article Chemistry, Analytical

A novel fabrication method of Parylene-based microelectrodes utilizing inkjet printing

Yoontae Kim et al.

SENSORS AND ACTUATORS B-CHEMICAL (2017)

Add to Collection
Article Materials Science, Multidisciplinary

Comparison of thermal decomposition and chemical reduction of particle-free silver ink for inkjet printing

Yuan Gu et al.

THIN SOLID FILMS (2017)

Add to Collection
Article Multidisciplinary Sciences

Fully inkjet-printed two-dimensional material field-effect heterojunctions for wearable and textile electronics

Tian Carey et al.

NATURE COMMUNICATIONS (2017)

Add to Collection
Article Materials Science, Multidisciplinary

Annealing effect in a nitrogen atmosphere on structural and optical properties of In2Te5 thin films

Yafei Yuan et al.

OPTICAL MATERIALS EXPRESS (2017)

Add to Collection
Article Chemistry, Multidisciplinary

Photonic sintering of a ZnO nanosheet photoanode using flash white light combined with deep UV irradiation for dye-sensitized solar cells

Supriya A. Patil et al.

RSC ADVANCES (2017)

Add to Collection
Article Chemistry, Multidisciplinary

Inkjet printed nanomaterial based flexible radio frequency identification (RFID) tag sensors for the internet of nano things

Ravina Singh et al.

RSC ADVANCES (2017)

Add to Collection
Article Materials Science, Multidisciplinary

All inkjet-printed piezoelectric electronic devices: energy generators, sensors and actuators

Damien Thuau et al.

JOURNAL OF MATERIALS CHEMISTRY C (2017)

Add to Collection
Article Materials Science, Multidisciplinary

All inkjet-printed graphene-based conductive patterns for wearable e-textile applications

Nazmul Karim et al.

JOURNAL OF MATERIALS CHEMISTRY C (2017)

Add to Collection
Review Materials Science, Multidisciplinary

Intense pulsed light for split-second structural development of nanomaterials

Ho Sun Lim et al.

JOURNAL OF MATERIALS CHEMISTRY C (2017)

Add to Collection
Article Chemistry, Physical

All-inkjet-printed flexible piezoelectric generator made of solvent evaporation assisted BaTiO3 hybrid material

Jongwoo Lim et al.

NANO ENERGY (2017)

Add to Collection
Article Engineering, Manufacturing

3D printing electronic components and circuits with conductive thermoplastic filament

Patrick F. Flowers et al.

ADDITIVE MANUFACTURING (2017)

Add to Collection
Review Engineering, Manufacturing

A review: additive manufacturing for active electronic components

Nitipon Saengchairat et al.

VIRTUAL AND PHYSICAL PROTOTYPING (2017)

Add to Collection
Review Chemistry, Multidisciplinary

Polymers for 3D Printing and Customized Additive Manufacturing

Samuel Clark Ligon et al.

CHEMICAL REVIEWS (2017)

Add to Collection
Article Engineering, Multidisciplinary

Maxwell-Wagner Effect in Multi-Layered Dielectrics: Interfacial Charge Measurement and Modelling

Thi Thu Nga Vu et al.

TECHNOLOGIES (2017)

Add to Collection
Review Materials Science, Multidisciplinary

Fundamentals and applications of 3D printing for novel materials

Jian-Yuan Lee et al.

APPLIED MATERIALS TODAY (2017)

Add to Collection
Article Nanoscience & Nanotechnology

Selective Conversion from p-Type to n-Type of Printed Bottom-Gate Carbon Nanotube Thin-Film Transistors and Application in Complementary Metal-Oxide-Semiconductor Inverters

Qiqi Xu et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection
Article Chemistry, Multidisciplinary

Highly Stretchable and UV Curable Elastomers for Digital Light Processing Based 3D Printing

Dinesh K. Patel et al.

ADVANCED MATERIALS (2017)

Add to Collection
Article Nanoscience & Nanotechnology

Far-UV Annealed Inkjet-Printed In2O3 Semiconductor Layers for Thin Film Transistors on a Flexible Polyethylene Naphthalate Substrate

Jaakko Leppaniemi et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection
Article Engineering, Environmental

Inkjet printable constantan ink for the fabrication of flexible and conductive film

Yuan Gu et al.

CHEMICAL ENGINEERING JOURNAL (2017)

Add to Collection
Review Engineering, Multidisciplinary

3D printing of polymer matrix composites: A review and prospective

Xin Wang et al.

COMPOSITES PART B-ENGINEERING (2017)

Add to Collection
Article Polymer Science

Dielectric properties of poly(4-vinylphenol) with embedded PbO nanoparticles

Wooje Han et al.

POLYMERS FOR ADVANCED TECHNOLOGIES (2016)

Add to Collection
Article Nanoscience & Nanotechnology

Fully Printed and Encapsulated SWCNT-Based Thin Film Transistors via a Combination of R2R Gravure and Inkjet Printing

Christa M. Homenick et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection
Article Nanoscience & Nanotechnology

Low-Thermal-Budget Photonic Processing of Highly Conductive Cu Interconnects Based on CuO Nanoinks: Potential for Flexible Printed Electronics

Matthew S. Rager et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection
Article Chemistry, Multidisciplinary

Fully Screen-Printed, Large-Area, and Flexible Active-Matrix Electrochromic Displays Using Carbon Nanotube Thin-Film Transistors

Xuan Cao et al.

ACS NANO (2016)

Add to Collection
Article Chemistry, Multidisciplinary

Paper-Based Triboelectric Nanogenerators Made of Stretchable Interlocking Kirigami Patterns

Changsheng Wu et al.

ACS NANO (2016)

Add to Collection
Review Chemistry, Multidisciplinary

Monitoring of Vital Signs with Flexible and Wearable Medical Devices

Yasser Khan et al.

ADVANCED MATERIALS (2016)

Add to Collection
Article Engineering, Environmental

Silver-ethanolamine-formate complex based transparent and stable ink: Electrical assessment with microwave plasma vs thermal sintering

Mohammad Vaseem et al.

CHEMICAL ENGINEERING JOURNAL (2016)

Add to Collection
Article Chemistry, Physical

Transversally Extended Laser Plasmonic Welding for Oxidation-Free Copper Fabrication toward High-Fidelity Optoelectronics

Jung Hwan Park et al.

CHEMISTRY OF MATERIALS (2016)

Add to Collection
Article Chemistry, Physical

Novel aspects of silver nanoparticles functionalization

B. Buszewski et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2016)

Add to Collection
Article Engineering, Electrical & Electronic

Effect of sintering temperature on the crystallization behavior and properties of silica filled PTFE composites

Ying Yuan et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2016)

Add to Collection
Article Materials Science, Multidisciplinary

Printable multi-walled carbon nanotubes thin film for high performance all solid state flexible supercapacitors

Sanjeev K. Ujjain et al.

MATERIALS RESEARCH BULLETIN (2016)

Add to Collection
Article Chemistry, Multidisciplinary

Sub-second carbon-nanotube-mediated microwave sintering for high-conductivity silver patterns on plastic substrates

Sunshin Jung et al.

NANOSCALE (2016)

Add to Collection
Article Chemistry, Multidisciplinary

Fully-integrated, bezel-less transistor arrays using reversibly foldable interconnects and stretchable origami substrates

Mijung Kim et al.

NANOSCALE (2016)

Add to Collection
Article Materials Science, Multidisciplinary

All-inkjet-printed low-pass filters with adjustable cutoff frequency consisting of resistors, inductors and transistors for sensor applications

H. F. Castro et al.

ORGANIC ELECTRONICS (2016)

Add to Collection
Review Chemistry, Physical

Review on Microwave-Matter Interaction Fundamentals and Efficient Microwave-Associated Heating Strategies

Jing Sun et al.

MATERIALS (2016)

Add to Collection
Article Chemistry, Multidisciplinary

Direct writing of stable Cu-Ag-based conductive patterns for flexible electronics

Wei Li et al.

RSC ADVANCES (2016)

Add to Collection
Review Polymer Science

Conductive Elastomers for Stretchable Electronics, Sensors and Energy Harvesters

Jin-Seo Noh

POLYMERS (2016)

Add to Collection
Article Materials Science, Multidisciplinary

Inkjet printing and photonic sintering of silver and copper oxide nanoparticles for ultra-low-cost conductive patterns

Andreas Albrecht et al.

JOURNAL OF MATERIALS CHEMISTRY C (2016)

Add to Collection
Article Chemistry, Analytical

Thermoelectric Responsive Shape Memory Graphene/Hydro-Epoxy Composites for Actuators

Yongkun Wang et al.

MICROMACHINES (2016)

Add to Collection
Article Materials Science, Multidisciplinary

Application of 3D Printing for Smart Objects with Embedded Electronic Sensors and Systems

Hiroki Ota et al.

ADVANCED MATERIALS TECHNOLOGIES (2016)

Add to Collection
Article Multidisciplinary Sciences

Silver Ink Formulations for Sinter-free Printing of Conductive Films

Kate Black et al.

SCIENTIFIC REPORTS (2016)

Add to Collection
Article Multidisciplinary Sciences

All-photonic drying and sintering process via flash white light combined with deep-UV and near-infrared irradiation for highly conductive copper nano-ink

Hyun-Jun Hwang et al.

SCIENTIFIC REPORTS (2016)

Add to Collection
Article Multidisciplinary Sciences

Screen-Printing Fabrication and Characterization of Stretchable Electronics

Jari Suikkola et al.

SCIENTIFIC REPORTS (2016)

Add to Collection
Article Multidisciplinary Sciences

All-inkjet-printed thin-film transistors: manufacturing process reliability by root cause analysis

Enrico Sowade et al.

SCIENTIFIC REPORTS (2016)

Add to Collection
Article Multidisciplinary Sciences

Inkjet-Printed Graphene/PEDOT:PSS Temperature Sensors on a Skin-Conformable Polyurethane Substrate

Tiina Vuorinen et al.

SCIENTIFIC REPORTS (2016)

Add to Collection
Review Engineering, Manufacturing

A review of printed passive electronic components through fully additive manufacturing methods

H. W. Tan et al.

VIRTUAL AND PHYSICAL PROTOTYPING (2016)

Add to Collection
Review Materials Science, Multidisciplinary

Gravure-printed electronics: recent progress in tooling development, understanding of printing physics, and realization of printed devices

Gerd Grau et al.

FLEXIBLE AND PRINTED ELECTRONICS (2016)

Add to Collection
Article Materials Science, Multidisciplinary

Stability and properties of PET Films in Electronics Applications in Hygrothermal Environments

Laura Frisk et al.

MRS ADVANCES (2016)

Add to Collection
Article Nanoscience & Nanotechnology

Photonic Sintering of Copper through the Controlled Reduction of Printed CuO Nanocrystals

Francesco Paglia et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Add to Collection
Article Chemistry, Multidisciplinary

Flexography-Printed In2O3 Semiconductor Layers for High-Mobility Thin-Film Transistors on Flexible Plastic Substrate

Jaakko Leppaniemi et al.

ADVANCED MATERIALS (2015)

Add to Collection
Review Chemistry, Multidisciplinary

Advances and Future Challenges in Printed Batteries

Ricardo E. Sousa et al.

CHEMSUSCHEM (2015)

Add to Collection
Article Engineering, Electrical & Electronic

Technologies for Printing Sensors and Electronics Over Large Flexible Substrates: A Review

Saleem Khan et al.

IEEE SENSORS JOURNAL (2015)

Add to Collection
Article Multidisciplinary Sciences

Printable elastic conductors with a high conductivity for electronic textile applications

Naoji Matsuhisa et al.

NATURE COMMUNICATIONS (2015)

Add to Collection
Article Multidisciplinary Sciences

On the self-damping nature of densification in photonic sintering of nanoparticles

William MacNeill et al.

SCIENTIFIC REPORTS (2015)

Add to Collection
Article Materials Science, Multidisciplinary

Inkjet Printed Conductive Tracks for Printed Electronics

S. -P. Chen et al.

ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY (2015)

Add to Collection
Article Materials Science, Biomaterials

A simple all-PEDOT: PSS electrochemical transistor for ascorbic acid sensing

I. Gualandi et al.

JOURNAL OF MATERIALS CHEMISTRY B (2015)

Add to Collection
Article Nanoscience & Nanotechnology

High electron mobility and low carrier concentration of hydrothermally grown ZnO thin films on seeded α-plane sapphire at low temperature

Nurul Azzyaty Jayah et al.

NANOSCALE RESEARCH LETTERS (2015)

Add to Collection
Review Energy & Fuels

Recent Progress on Printed Flexible Batteries: Mechanical Challenges, Printing Technologies, and Future Prospects

Abhinav M. Gaikwad et al.

ENERGY TECHNOLOGY (2015)

Add to Collection
Article Nanoscience & Nanotechnology

Fully Inkjet-Printed Transparent Oxide Thin Film Transistors Using a Fugitive Wettability Switch

Jaewon Jang et al.

ADVANCED ELECTRONIC MATERIALS (2015)

Add to Collection
Article Chemistry, Multidisciplinary

A Miniaturized Flexible Antenna Printed on a High Dielectric Constant Nanopaper Composite

Tetsuji Inui et al.

ADVANCED MATERIALS (2015)

Add to Collection
Article Chemistry, Multidisciplinary

High-Resolution Patterning of Graphene by Screen Printing with a Silicon Stencil for Highly Flexible Printed Electronics

Woo Jin Hyun et al.

ADVANCED MATERIALS (2015)

Add to Collection
Article Multidisciplinary Sciences

Comparison of laser and intense pulsed light sintering (IPL) for inkjet-printed copper nanoparticle layers

Juha Niittynen et al.

SCIENTIFIC REPORTS (2015)

Add to Collection
Review Chemistry, Multidisciplinary

Conductive silver inks and their applications in printed and flexible electronics

Venkata Krishna R. Rao et al.

RSC ADVANCES (2015)

Add to Collection
Article Chemistry, Multidisciplinary

Assisted sintering of silver nanoparticle inkjet ink on paper with active coatings

Thomas Ohlund et al.

RSC ADVANCES (2015)

Add to Collection
Proceedings Paper Energy & Fuels

Evaluation of Flexographic Printing Technology for Multi-Busbar Solar Cells

A. Lorenz et al.

PROCEEDINGS OF THE FIFTH WORKSHOP ON METALLIZATION FOR CRYSTALLINE SILICON SOLAR CELLS (2015)

Add to Collection
Article Engineering, Manufacturing

Combined 3D Printing Technologies and Material for Fabrication of Tactile Sensors

Morteza Vatani et al.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2015)

Add to Collection
Review Chemistry, Multidisciplinary

Copper conductive inks: synthesis and utilization in flexible electronics

Venkata K. Abhinav et al.

RSC ADVANCES (2015)

Add to Collection
Article Chemistry, Multidisciplinary

Gravure Printing of Graphene for Large-Area Flexible Electronics

Ethan B. Secor et al.

ADVANCED MATERIALS (2014)

Add to Collection
Article Physics, Applied

Dispenser printed circular thermoelectric devices using Bi and Bi0.5Sb1.5Te3

Deepa Madan et al.

APPLIED PHYSICS LETTERS (2014)

Add to Collection
Article Physics, Applied

Stepwise current electrical sintering method for inkjet-printed conductive ink

Hyoseung Lee et al.

JAPANESE JOURNAL OF APPLIED PHYSICS (2014)

Add to Collection
Article Chemistry, Physical

Molecular Reorientation and Structural Changes in Cosolvent-Treated Highly Conductive PEDOT:PSS Electrodes for Flexible Indium Tin Oxide-Free Organic Electronics

Claudia M. Palumbiny et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2014)

Add to Collection
Review Materials Science, Multidisciplinary

Recent progress of high performance polymer OLED and OPV materials for organic printed electronics

Chizu Sekine et al.

SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2014)

Add to Collection
Article Materials Science, Multidisciplinary

Influence of In and Ga additives onto SnO2 inkjet-printed semiconductor

A. Vila et al.

THIN SOLID FILMS (2014)

Add to Collection
Article Materials Science, Multidisciplinary

Alternative sintering methods compared to conventional thermal sintering for inkjet printed silver nanoparticle ink

Juha Niittynen et al.

THIN SOLID FILMS (2014)

Add to Collection
Review Chemistry, Physical

New Gold Nanostructures for Sensor Applications: A Review

Yuanchao Zhang et al.

MATERIALS (2014)

Add to Collection
Article Materials Science, Multidisciplinary

Progress of alternative sintering approaches of inkjet-printed metal inks and their application for manufacturing of flexible electronic devices

Sebastian Wuenscher et al.

JOURNAL OF MATERIALS CHEMISTRY C (2014)

Add to Collection
Article Nanoscience & Nanotechnology

Low-Temperature, High-Performance Solution-Processed Thin-Film Transistors with Peroxo-Zirconium Oxide Dielectric

Jee Ho Park et al.

ACS APPLIED MATERIALS & INTERFACES (2013)

Add to Collection
Article Engineering, Multidisciplinary

FUTURE, OPPORTUNITIES AND CHALLENGES OF INKJET TECHNOLOGIES

J. R. Castrejon-Pita et al.

ATOMIZATION AND SPRAYS (2013)

Add to Collection
Article Engineering, Multidisciplinary

Dielectric, mechanical and thermal properties of polymer/BaTiO3 composites for embedded capacitor

R. K. Goyal et al.

COMPOSITES PART B-ENGINEERING (2013)

Add to Collection
Article Materials Science, Multidisciplinary

Rapid low-pressure plasma sintering of inkjet-printed silver nanoparticles for RFID antennas

Franziska M. Wolf et al.

JOURNAL OF MATERIALS RESEARCH (2013)

Add to Collection
Article Engineering, Electrical & Electronic

Morphological influences on the electrical sintering process of Aerosol Jet and Ink Jet printed silver microstructures

Christian Werner et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2013)

Add to Collection
Article Chemistry, Multidisciplinary

Integrated Materials Design of Organic Semiconductors for Field-Effect Transistors

Jianguo Mei et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)

Add to Collection
Review Multidisciplinary Sciences

Dairy Products Consumption and Risk of Type 2 Diabetes: Systematic Review and Dose-Response Meta-Analysis

Dengfeng Gao et al.

PLOS ONE (2013)

Add to Collection
Review Multidisciplinary Sciences

Carbon Nanotubes: Present and Future Commercial Applications

Michael F. L. De Volder et al.

SCIENCE (2013)

Add to Collection
Article Materials Science, Multidisciplinary

Electrical sintering characteristics of inkjet-printed conductive Ag lines on a paper substrate

Shin Jang et al.

THIN SOLID FILMS (2013)

Add to Collection
Article Multidisciplinary Sciences

Strain sensitivity and durability in p-type and n-type organic thin-film transistors with printed silver electrodes

Kenjiro Fukuda et al.

SCIENTIFIC REPORTS (2013)

Add to Collection
Article Materials Science, Multidisciplinary

Highly conductive short chain carboxylic acid encapsulated silver nanoparticle based inks for direct write technology applications

Krishnamraju Ankireddy et al.

JOURNAL OF MATERIALS CHEMISTRY C (2013)

Add to Collection
Article Materials Science, Multidisciplinary

Synthesis of low-temperature-processable and highly conductive Ag ink by a simple ligand modification: the role of adsorption energy

Inyu Jung et al.

JOURNAL OF MATERIALS CHEMISTRY C (2013)

Add to Collection
Article Chemistry, Multidisciplinary

Plasma and Microwave Flash Sintering of a Tailored Silver Nanoparticle Ink, Yielding 60% Bulk Conductivity on Cost- Effective Polymer Foils

Jolke Perelaer et al.

ADVANCED MATERIALS (2012)

Add to Collection
Article Chemistry, Multidisciplinary

Roll-to-Roll Compatible Sintering of Inkjet Printed Features by Photonic and Microwave Exposure: From Non-Conductive Ink to 40% Bulk Silver Conductivity in Less Than 15 Seconds

Jolke Perelaer et al.

ADVANCED MATERIALS (2012)

Add to Collection
Review Engineering, Electrical & Electronic

Inkjet printing of conductive materials: a review

Gerard Cummins et al.

CIRCUIT WORLD (2012)

Add to Collection
Article Engineering, Electrical & Electronic

Design and Fabrication of Soft Artificial Skin Using Embedded Microchannels and Liquid Conductors

Yong-Lae Park et al.

IEEE SENSORS JOURNAL (2012)

Add to Collection
Article Engineering, Electrical & Electronic

Ohmic Curing of Printed Silver Conductive Traces

D. A. Roberson et al.

JOURNAL OF ELECTRONIC MATERIALS (2012)

Add to Collection
Review Multidisciplinary Sciences

A roadmap for graphene

K. S. Novoselov et al.

NATURE (2012)

Add to Collection
Review Materials Science, Multidisciplinary

Roll-to-roll fabrication of polymer solar cells

Roar Sondergaard et al.

MATERIALS TODAY (2012)

Add to Collection
Review Optics

Past achievements and future challenges in the development of optically transparent electrodes

Klaus Ellmer

NATURE PHOTONICS (2012)

Add to Collection
Article Multidisciplinary Sciences

A Simple, Low-Cost Conductive Composite Material for 3D Printing of Electronic Sensors

Simon J. Leigh et al.

PLOS ONE (2012)

Add to Collection
Article Engineering, Mechanical

Integrating stereolithography and direct print technologies for 3D structural electronics fabrication

Amit Joe Lopes et al.

RAPID PROTOTYPING JOURNAL (2012)

Add to Collection
Article Engineering, Electrical & Electronic

Performance of High-Permittivity Ceramic-Polymer Composite as a Substrate for UHF RFID Tag Antennas

A. A. Babar et al.

INTERNATIONAL JOURNAL OF ANTENNAS AND PROPAGATION (2012)

Add to Collection
Article Chemistry, Multidisciplinary

Direct Monolithic Integration of Organic Photovoltaic Circuits on Unmodified Paper

Miles C. Barr et al.

ADVANCED MATERIALS (2011)

Add to Collection
Review Chemistry, Multidisciplinary

Emerging Transparent Electrodes Based on Thin Films of Carbon Nanotubes, Graphene, and Metallic Nanostructures

David S. Hecht et al.

ADVANCED MATERIALS (2011)

Add to Collection
Article Engineering, Electrical & Electronic

Contactless Electrical Sintering of Silver Nanoparticles on Flexible Substrates

Mark Allen et al.

IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES (2011)

Add to Collection
Article Chemistry, Physical

High-performance low-temperature solution-processable ZnO thin film transistors by microwave-assisted annealing

Taehwan Jun et al.

JOURNAL OF MATERIALS CHEMISTRY (2011)

Add to Collection
Article Chemistry, Physical

Printed Cu source/drain electrode capped by CuO hole injection layer for organic thin film transistors

Sunho Jeong et al.

JOURNAL OF MATERIALS CHEMISTRY (2011)

Add to Collection
Article Engineering, Electrical & Electronic

Environmental protection of inkjet-printed Ag conductors

Eerik Halonen et al.

MICROELECTRONIC ENGINEERING (2011)

Add to Collection
Article Chemistry, Physical

Inkjet Printing of Conductive Silver Patterns by Using the First Aqueous Particle-Free MOD Ink without Additional Stabilizing Ligands

Stephan F. Jahn et al.

CHEMISTRY OF MATERIALS (2010)

Add to Collection
Article Engineering, Electrical & Electronic

All-Printed and Roll-to-Roll-Printable 13.56-MHz-Operated 1-bit RF Tag on Plastic Foils

Minhun Jung et al.

IEEE TRANSACTIONS ON ELECTRON DEVICES (2010)

Add to Collection
Article Engineering, Chemical

Enhanced Surface Wetting of Pigment Coated Paper by UVC Irradiation

Anni Maattanen et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2010)

Add to Collection
Article Physics, Applied

The effect of reduction atmospheres on the sintering behaviors of inkjet-printed Cu interconnectors

Inyoung Kim et al.

JOURNAL OF APPLIED PHYSICS (2010)

Add to Collection
Article Chemistry, Physical

Inkjet Printing of Single-Walled Carbon Nanotube/RuO2 Nanowire Supercapacitors on Cloth Fabrics and Flexible Substrates

Pochiang Chen et al.

NANO RESEARCH (2010)

Add to Collection
Review Materials Science, Multidisciplinary

Synthesis and applications of one-dimensional semiconductors

Sven Barth et al.

PROGRESS IN MATERIALS SCIENCE (2010)

Add to Collection
Article Materials Science, Multidisciplinary

Pulsed laser deposition of indium tin oxide films on flexible polyethylene naphthalate display substrates at room temperature

Konstantinos A. Sierros et al.

THIN SOLID FILMS (2010)

Add to Collection
Review Chemistry, Physical

Copper Nanoparticles for Printed Electronics: Routes Towards Achieving Oxidation Stability

Shlomo Magdassi et al.

MATERIALS (2010)

Add to Collection
Article Engineering, Biomedical

The insulation performance of reactive parylene films in implantable electronic devices

John P. Seymour et al.

BIOMATERIALS (2009)

Add to Collection
Article Green & Sustainable Science & Technology

Environmental evaluation of new technology: printed electronics case study

Esa Kunnari et al.

JOURNAL OF CLEANER PRODUCTION (2009)

Add to Collection
Article Chemistry, Physical

Conductive copper and nickel lines via reactive inkjet printing

Dapeng Li et al.

JOURNAL OF MATERIALS CHEMISTRY (2009)

Add to Collection
Article Chemistry, Physical

Argon plasma sintering of inkjet printed silver tracks on polymer substrates

Ingo Reinhold et al.

JOURNAL OF MATERIALS CHEMISTRY (2009)

Add to Collection
Article Electrochemistry

Green Electroless Plating Method Using Gold Nanoparticles for Conducting Microbeads: Application to Anisotropic Conductive Films

Shiho Tokonami et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2009)

Add to Collection
Article Nanoscience & Nanotechnology

One-step inkjet printing of conductive silver tracks on polymer substrates

Jolke Perelaer et al.

NANOTECHNOLOGY (2009)

Add to Collection
Article Chemistry, Multidisciplinary

Inkjet printing of narrow conductive tracks on untreated polymeric substrates

Thijs H. J. van Osch et al.

ADVANCED MATERIALS (2008)

Add to Collection
Review Chemistry, Multidisciplinary

Composites of intrinsically conducting polymers as sensing nanomaterials

David W. Hatchett et al.

CHEMICAL REVIEWS (2008)

Add to Collection
Article Nanoscience & Nanotechnology

Electrical sintering of nanoparticle structures

Mark L. Allen et al.

NANOTECHNOLOGY (2008)

Add to Collection
Editorial Material Microbiology

'Til death do us part': coming to terms with symbiotic relationships - Foreword

David A. Relman

NATURE REVIEWS MICROBIOLOGY (2008)

Add to Collection
Article Environmental Sciences

The historical record of PCB and PCDD/F deposition at Greifensee, a lake of the Swiss plateau, between 1848 and 1999

Markus Zennegg et al.

CHEMOSPHERE (2007)

Add to Collection
Review Spectroscopy

Atmospheric pressure plasmas: A review

C Tendero et al.

SPECTROCHIMICA ACTA PART B-ATOMIC SPECTROSCOPY (2006)

Add to Collection
Article Physics, Condensed Matter

Multilayer formation in spin-coated thin films of low-bandgap polyfluorene: PCBM blends

CM Björström et al.

JOURNAL OF PHYSICS-CONDENSED MATTER (2005)

Add to Collection
Article Chemistry, Physical

Enhanced mobility of poly(3-hexylthiophene) transistors by spin-coating from high-boiling-point solvents

JF Chang et al.

CHEMISTRY OF MATERIALS (2004)

Add to Collection
Article Materials Science, Coatings & Films

Properties of SiO2 and Al2O3 films for electrical insulation applications deposited by reactive pulse magnetron sputtering

H Bartzsch et al.

SURFACE & COATINGS TECHNOLOGY (2003)

Add to Collection
Article Instruments & Instrumentation

Plasma treatment of polymers for surface and adhesion improvement

D Hegemann et al.

NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS (2003)

Add to Collection
Article Engineering, Manufacturing

Thermal transport properties of gold-covered thin-film silicon dioxide

MG Burzo et al.

IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES (2003)

Add to Collection
Webinars Posters Questions Hubs Funding Journals Papers Connect Collections Reviewers About Us FAQs Mobile App Privacy Policy Terms of Use
© Peeref 2019-2024. All rights reserved.