Related references
Note: Only part of the references are listed.Analysis of the thermal stability of residual stresses induced in Ti-6Al-4 V by high density LSP treatments
W. Warzanskyj et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2023)
Gradient microstructure and fatigue properties of TC21 titanium alloy processed by laser shock peening
Dongsheng He et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2023)
Microstructure evolution and fatigue properties subjected to optimized coverage areas of laser shock peened TB10 titanium alloy
Wei Guo et al.
OPTICS AND LASER TECHNOLOGY (2023)
Microstructure evolution and fatigue properties subjected to optimized coverage areas of laser shock peened TB10 titanium alloy
Wei Guo et al.
OPTICS AND LASER TECHNOLOGY (2023)
The effect of laser shock peening with and without protective coating on intergranular corrosion of sensitized AA5083
Jan Kaufman et al.
CORROSION SCIENCE (2022)
The effects of surface pits and intermetallics on the competing failure modes in laser shock peened AA7075-T651: Experiments and modelling
C. You et al.
INTERNATIONAL JOURNAL OF FATIGUE (2022)
Fatigue strength improvement in Ti-6Al-4V subjected to foreign object damage by combined treatment of laser shock peening and shot peening
Lingfeng Wang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2022)
The effect of warm laser shock peening on the thermal stability of compressive residual stress and the hot corrosion resistance of Ni-based single-crystal superalloy
Zhanghan Tang et al.
OPTICS AND LASER TECHNOLOGY (2022)
Residual stress distribution and elevated temperature fatigue behaviour of laser peened Ti-6Al-4V with a curved surface
K. Praveenkumar et al.
INTERNATIONAL JOURNAL OF FATIGUE (2022)
Effect of laser shock peening without protective coating on the surface mechanical properties of NiTi alloy
Hao Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2022)
Deep learning-based monitoring of surface residual stress and efficient sensing of AE for laser shock peening
Zhifen Zhang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2022)
The effect of laser shock peening on surface integrity and high and very high cycle fatigue properties of 2024-T351 aluminum alloy
Zhi Qin et al.
OPTICS AND LASER TECHNOLOGY (2022)
Investigation on surface residual stress hole of thin plate subjected to two sided laser shock processing
Hengji Yang et al.
OPTICS AND LASER TECHNOLOGY (2022)
Evaluation of laser shock peening process parameters incorporating Almen strip deflections
D. Glaser et al.
SURFACE & COATINGS TECHNOLOGY (2022)
Hole surface texture reconstructed with laser shock peening and effect on fretting behavior
Huiqing Gu et al.
WEAR (2022)
Prediction of high-cycle fatigue strength in a Ti-17 alloy blade after foreign object damage
Zhenhua Zhao et al.
ENGINEERING FRACTURE MECHANICS (2021)
Experimental and analytical investigation of the effects of laser shock peening processing strategy on fatigue crack growth in thin 2024 aluminium alloy panels
D. C. van Aswegen et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
Effect of laser shock peening on microstructural, mechanical and corrosion properties of laser beam welded commercially pure titanium
Angshuman Chattopadhyay et al.
OPTICS AND LASER TECHNOLOGY (2021)
Effects of laser shock peening on the mechanisms of fatigue short crack initiation and propagation of AA7075-T651
A. G. Sanchez et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
Fatigue resistance and remaining life assessment of induction-hardened S38C steel railway axles
Yanan Hu et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
Numerical study on laser shock peening of TC4 titanium alloy based on the plate and blade model
Cheng Wang et al.
OPTICS AND LASER TECHNOLOGY (2021)
Fatigue performance improvement of laser shock peened hole on powder metallurgy Ni-based superalloy labyrinth disc
Xinlei Pan et al.
SURFACE & COATINGS TECHNOLOGY (2021)
Recent Developments and Novel Applications of Laser Shock Peening: A Review
Chaoyi Zhang et al.
ADVANCED ENGINEERING MATERIALS (2021)
Improving high cycle fatigue performance of gas tungsten arc welded Ti6Al4V titanium alloy by warm laser shock peening
Xiaotai Feng et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
Experimental study and fatigue life prediction on high cycle fatigue performance of laser-peened TC4 titanium alloy
Xiangfan Nie et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Effects of ablative and non-ablative laser shock peening on AA7075-T651 corrosion and fatigue performance
A. G. Sanchez et al.
MATERIALS SCIENCE AND TECHNOLOGY (2021)
Shot peening increases resistance to cyclic fatigue fracture of endodontic files
Javier Nino-Barrera et al.
SCIENTIFIC REPORTS (2021)
Influence of multiple laser impacts on thin leading edges of turbine blade
M. Ayeb et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS (2020)
Fatigue behavior of double-sided laser shock peened Ti-6Al-4V thin blade subjected to foreign object damage
Xudong Ren et al.
OPTICS AND LASER TECHNOLOGY (2020)
Fatigue behavior of Ti-17 titanium alloy subjected to different laser shock peened regions and its microstructural response
Rujian Sun et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Manufacturing Processes of Integral Blade Rotors for Turbomachinery, Processes and New Approaches
Haizea Gonzalez-Barrio et al.
APPLIED SCIENCES-BASEL (2020)
Forced vibration analysis of blade after selective laser shock processing based on Timoshenko's beam theory
Peilin Fu et al.
COMPOSITE STRUCTURES (2020)
Effect of foreign object damage on high-cycle fatigue strength of titanium alloy for aero-engine blade
Zhenhua Zhao et al.
ENGINEERING FAILURE ANALYSIS (2020)
Fatigue behaviors of foreign object damaged Ti-6Al-4V alloys under laser shock peening
Yu Yang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Improving fatigue resistance of railway axles by cold rolling: Process optimisation and new experimental evidences
D. Regazzi et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Surface Integrity of TA19 Notched Simulated Blades with Laser Shock Peening and Its Effect on Fatigue Strength
Junfeng Wu et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2020)
Thermal stress relaxation in shot peened and laser peened nickel-based superalloy
K. S. Chin et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Effects of Different Mechanical Surface Enhancement Techniques on Surface Integrity and Fatigue Properties of Ti-6Al-4V: A Review
Zi-Meng Wang et al.
CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES (2019)
Investigation on residual stress distribution in thin plate subjected to two sided laser shock processing
Xingquan Zhang et al.
OPTICS AND LASER TECHNOLOGY (2019)
Laser Shock Peening, the Path to Production
Allan H. Clauer
METALS (2019)
Effects of scanning path and overlapping rate on residual stress of 316L stainless steel blade subjected to massive laser shock peening treatment with square spots
G. Xu et al.
APPLIED SURFACE SCIENCE (2019)
Improving the fretting performance of aero-engine tenon joint materials using surface strengthening
Guoxin Lu et al.
MATERIALS SCIENCE AND TECHNOLOGY (2019)
Effects of rolled edges on the fatigue life of shot peened Inconel 718
T. Klotz et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Effect of Overlapping of Peen Spots on Residual Stresses in Laser-Peened Aluminium Sheets
M. Burak Toparli et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2019)
Laser shock peening without coating induced residual stress distribution, wettability characteristics and enhanced pitting corrosion resistance of austenitic stainless steel
S. Prabhakaran et al.
APPLIED SURFACE SCIENCE (2018)
Effect of laser shock peening on combined low- and high-cycle fatigue life of casting and forging turbine blades
Cao Chen et al.
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2018)
High Cycle Fatigue Performance in Laser Shock Peened TC4 Titanium Alloys Subjected to Foreign Object Damage
Sihai Luo et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)
Geometry distortion and residual stress of alternate double-sided laser peening of thin section component
Yongxiang Hu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Surface integrity integrity and fatigue lives of Ti17 compressor blades subjected to laser shock peening with square spots
Shikun Zou et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Application of massive laser shock processing for improvement of mechanical and tribological properties
Uros Trdan et al.
SURFACE & COATINGS TECHNOLOGY (2018)
The effects of laser shock peening on the mechanical properties and biomedical behavior of AZ31B magnesium alloy
Ruixia Zhang et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Improvement of corrosion resistance of AA2024-T3 using femtosecond laser peening without protective and confining medium
Uros Trdan et al.
CORROSION SCIENCE (2018)
Foreign Object Damage Investigation of a Bypass Vane of an Aero-engine
Rajesh Sharma et al.
MATERIALS TODAY-PROCEEDINGS (2018)
Evaluating the influence of residual stresses and surface damage on fatigue life of nickel superalloys
R. M. N. Fleury et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Effect of laser shock peening on elevated temperature residual stress, microstructure and fatigue behavior of ATI 718Plus alloy
Micheal Kattoura et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Laser shock peening induced residual stresses and the effect on crack propagation behavior
Jingyi Zhao et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Observation of fretting fatigue cracks of Ti6A14V titanium alloy
Z. Y. Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Simultaneous enhancement of strength and fatigue crack growth behavior of nanocrystalline steels by annealing
Thomas Leitner et al.
SCRIPTA MATERIALIA (2017)
Effect of laser shock peening on the stress corrosion cracking of AZ31B magnesium alloy in a simulated body fluid
Mao-Zhong Ge et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Investigation on the fretting fatigue behaviors of Ti-6A1-4V dovetail joint specimens treated with shot-peening
Qi Yang et al.
WEAR (2017)
Machining the Integral Impeller and Blisk of Aero-Engines: A Review of Surface Finishing and Strengthening Technologies
Youzhi Fu et al.
CHINESE JOURNAL OF MECHANICAL ENGINEERING (2017)
Microstructural response and grain refinement mechanism of commercially pure titanium subjected to multiple laser shock peening impacts
J. Z. Lu et al.
ACTA MATERIALIA (2017)
Experimental and numerical studies on the effect of deep rolling on bending fretting fatigue resistance of Al7075
G. H. Majzoobi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
A novel acoustic monitoring method of laser peening
Chenlin Qiu et al.
APPLIED ACOUSTICS (2016)
Fatigue performance of biodegradable magnesium-calcium alloy processed by laser shock peening for orthopedic implants
M. P. Sealy et al.
INTERNATIONAL JOURNAL OF FATIGUE (2016)
Effect of laser shock peening on microstructure and fatigue crack growth rate of AZ31B magnesium alloy
Mao-Zhong Ge et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
[INVITED] A review: Warm laser shock peening and related laser processing technique
Yiliang Liao et al.
OPTICS AND LASER TECHNOLOGY (2016)
Influence of laser shock peening pulse density and spot size on the surface integrity of X2NiCoMo18-9-5 maraging steel
Luca Petan et al.
SURFACE & COATINGS TECHNOLOGY (2016)
Warm laser shock peening without coating induced phase transformations and pinning effect on fatigue life of low-alloy steel
S. Prabhakaran et al.
MATERIALS & DESIGN (2016)
Influence of Notch Effects Created by Laser Cutting Process on Fatigue Behavior of Metastable Austenitic Stainless Steel
D. Pessoa et al.
XVIII INTERNATIONAL COLLOQUIUM ON MECHANICAL FATIGUE OF METALS (ICMFM XVIII) (2016)
Evolution of a laser shock peened residual stress field locally with foreign object damage and subsequent fatigue crack growth
S. Zabeen et al.
ACTA MATERIALIA (2015)
Characteristics of surface layers formed on inconel 718 by laser shock peening with and without a protective coating
Amrinder S. Gill et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Effects of warm laser peening at elevated temperature on the low-cycle Cross Mark fatigue behavior of Ti6Al4V alloy
J. Z. Zhou et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Residual stresses due to foreign object damage in laser-shock peened aerofoils: Simulation and measurement
B. Lin et al.
MECHANICS OF MATERIALS (2015)
Modeling of residual stress field induced in Ti-6Al-4V alloy plate by two sided laser shock processing
Xingquan Zhang et al.
SURFACE & COATINGS TECHNOLOGY (2015)
Interface, lattice strain and dislocation density of SiCp/Al composite consolidated by equal channel angular pressing and torsion
Chen-hao Qian et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2015)
Vibration based damage detection of rotor blades in a gas turbine engine
S. Madhavan et al.
ENGINEERING FAILURE ANALYSIS (2014)
An investigation about the influence of deep rolling on fatigue crack growth in railway axles made of a medium strength steel
D. Regazzi et al.
ENGINEERING FRACTURE MECHANICS (2014)
Experimental and Finite Element Simulation Study of Thermal Relaxation of Residual Stresses in Laser Shock Peened IN718 SPF Superalloy
Zhong Zhou et al.
EXPERIMENTAL MECHANICS (2014)
Fatigue behaviour of geometric features subjected to laser shock peening: Experiments and modelling
M. Achintha et al.
INTERNATIONAL JOURNAL OF FATIGUE (2014)
Fatigue crack growth in laser-shock-peened Ti-6Al-4V aerofoil specimens due to foreign object damage
B. Lin et al.
INTERNATIONAL JOURNAL OF FATIGUE (2014)
Optimization of the fatigue resistance of AISI304 stainless steel by ultrasonic impact treatment
Xinjun Yang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2014)
High temperature mechanical properties and surface fatigue behavior improving of steel alloy via laser shock peening
N. F. Ren et al.
MATERIALS & DESIGN (2014)
A finite element analysis of thermal relaxation of residual stress in laser shock processing Ni-based alloy GH4169
X. D. Ren et al.
MATERIALS & DESIGN (2014)
Laser shock peening effect on the dislocation transitions and grain refinement of Al-Mg-Si alloy
U. Trdan et al.
MATERIALS CHARACTERIZATION (2014)
Ultrahigh dense and gradient nano-precipitates generated by warm laser shock peening for combination of high strength and ductility
Chang Ye et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Laser shock peening of steam turbine blade for enhanced service life
R. Sundar et al.
PRAMANA-JOURNAL OF PHYSICS (2014)
Laser shock peening and mechanical shot peening processes applicable for the surface treatment of technical grade ceramics: A review
Pratik P. Shukla et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2014)
Laser Shock Peening on a 6056-14 Aluminium Alloy for Airframe Applications
Daniel Glaser et al.
11TH INTERNATIONAL FATIGUE CONGRESS, PTS 1 AND 2 (2014)
Laser Shock Processing of Titanium Alloy Blade and FEM Simulation
Yan Bing et al.
RESEARCH IN MECHANICAL ENGINEERING AND MATERIAL SCIENCE (2014)
Controlled precipitation by thermal engineered laser shock peening and its effect on dislocation pinning: Multiscale dislocation dynamics simulation and experiments
Yiliang Liao et al.
ACTA MATERIALIA (2013)
Influences of surface grain size and gradient variation along depth on fatigue life of metallic materials
Xinjun Yang et al.
MATERIALS & DESIGN (2013)
Effects of laser shock processing with different parameters and ways on residual stresses fields of a TC4 alloy blade
Y. W. Fang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Residual stresses caused by head-on and 45° foreign object damage for a laser shock peened Ti-6Al-4V alloy aerofoil
S. Zabeen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
The strengthening mechanism of a nickel-based alloy after laser shock processing at high temperatures
Yinghong Li et al.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2013)
Eigenstrain modelling of residual stress generated by arrays of laser shock peening shots and determination of the complete stress field using limited strain measurements
M. Achintha et al.
SURFACE & COATINGS TECHNOLOGY (2013)
The mechanisms of thermal engineered laser shock peening for enhanced fatigue performance
Yiliang Liao et al.
ACTA MATERIALIA (2012)
On the effect of deep-rolling and laser-peening on the stress-controlled low- and high-cycle fatigue behavior of Ti-6Al-4V at elevated temperatures up to 550°C
Igor Altenberger et al.
INTERNATIONAL JOURNAL OF FATIGUE (2012)
Effect of laser shock peening on residual stress and fatigue life of clad 2024 aluminium sheet containing scribe defects
M. Dorman et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Laser shock peening without absorbent coating (LSPwC) effect on 3D surface topography and mechanical properties of 6082-T651 Al alloy
Uros Trdan et al.
SURFACE & COATINGS TECHNOLOGY (2012)
Thermal relaxation of residual stress in laser shock peened Ti-6Al-4V alloy
Zhong Zhou et al.
SURFACE & COATINGS TECHNOLOGY (2012)
Fretting Wear Behavior of Laser Peened Ti-6Al-4V
S. Anand Kumar et al.
TRIBOLOGY TRANSACTIONS (2012)
Fatigue performance improvement in AISI 4140 steel by dynamic strain aging and dynamic precipitation during warm laser shock peening
Chang Ye et al.
ACTA MATERIALIA (2011)
Warm Laser Shock Peening: New developments and process optimization
G. Tani et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2011)
Crack propagation analysis of mechanically damaged compressor blades subjected to high cycle fatigue
Lucjan Witek
ENGINEERING FAILURE ANALYSIS (2011)
Dislocation pinning effects induced by nano-precipitates during warm laser shock peening: Dislocation dynamic simulation and experiments
Yiliang Liao et al.
JOURNAL OF APPLIED PHYSICS (2011)
Eigenstrain modelling of residual stresses generated by laser shock peening
Mithila Achintha et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
Characterisation of foreign object damage (FOD) and early fatigue crack growth in laser shock peened Ti-6Al-4V aerofoil specimens
S. Spanrad et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Laser shock-induced spalling and fragmentation in vanadium
H. Jarmakani et al.
ACTA MATERIALIA (2010)
Grain refinement mechanism of multiple laser shock processing impacts on ANSI 304 stainless steel
J. Z. Lu et al.
ACTA MATERIALIA (2010)
Grain refinement of LY2 aluminum alloy induced by ultra-high plastic strain during multiple laser shock processing impacts
J. Z. Lu et al.
ACTA MATERIALIA (2010)
Warm Laser Shock Peening Driven Nanostructures and Their Effects on Fatigue Performance in Aluminum Alloy 6160
Chang Ye et al.
ADVANCED ENGINEERING MATERIALS (2010)
Improvement of fatigue life of Ti-6Al-4V alloy by laser shock peening
X. C. Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
High strain-rate spallation and fracture of tungsten by laser-induced stress waves
Lili Hu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Investigation on the non-homogeneity of residual stress field induced by laser shock peening
Yongxiang Hu et al.
SURFACE & COATINGS TECHNOLOGY (2009)
Fretting fatigue of laser shock peened Ti-6Al-4V
S. Srinivasan et al.
TRIBOLOGY INTERNATIONAL (2009)
The effects of laser peening and shot peening on fretting fatigue in Ti-6Al-4V coupons
Kevin K. Liu et al.
TRIBOLOGY INTERNATIONAL (2009)
Failure analysis of Ti6Al4V gas turbine compressor blades
A. Kermanpur et al.
ENGINEERING FAILURE ANALYSIS (2008)
Improved high cycle fatigue damage tolerance of turbine-engine compressor components by low plasticity burnishing
Paul S. Prevey et al.
JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME (2008)
Relaxation of shot-peened residual stresses under creep loading
Dennis J. Buchanan et al.
SCRIPTA MATERIALIA (2008)
Fem simulation of residual stresses induced by laser shock with overlapping laser spots
Y HU et al.
Acta Metallurgica Sinica-English Letters (2008)
Life prediction of fretting fatigue with advanced surface treatments
Patrick J. Golden et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
The effect of laser power density on the fatigue life of laser-shock-peened 7050 aluminium alloy
Q. Liu et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2007)
Comparison of the fatigue behavior and residual stress stability of laser-shock peened and deep rolled austenitic stainless steel AISI 304 in the temperature range 25-600°C
I. Nikitin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Creep-fatigue life prediction under fully-reversed multiaxial loading at high temperatures
De-Guang Shang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2007)
Numerical investigation of opposing dual sided microscale laser shock peening
Yajun Fan et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2007)
Laser Peening without Coating as a Surface Enhancement Technology
Yuji Sano et al.
JOURNAL OF LASER MICRO NANOENGINEERING (2006)
Effects of fatigue and fretting on residual stresses introduced by laser shock peening
A. King et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Case studies of fatigue life improvement using low plasticity burnishing in gas turbine engine applications
Paul S. Prevey et al.
JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME (2006)
Fatigue and residual stress relaxation of deep rolled differently aged aluminium alloy AA6110
P. Juijerm et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Fatigue life improvement through surface nanostructuring of stainless steel by means of surface mechanical attrition treatment
T Roland et al.
SCRIPTA MATERIALIA (2006)
Wear and friction of 6061-T6 aluminum alloy treated by laser shock processing
U Sánchez-Santana et al.
WEAR (2006)
Retardation of crack initiation and growth in austenitic stainless steels by laser peening without protective coating
Y Sano et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Effect of shot peening on fatigue performance of a lamellar titanium aluminide alloy
J Lindemann et al.
ACTA MATERIALIA (2006)
Foreign object damage on the leading edge of a thin blade
X Chen
MECHANICS OF MATERIALS (2005)
Investigation into effects of re-shot-peening on fretting fatigue behavior of Ti-6Al-4V
H Lee et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Stress relaxation behavior of shot-peened Ti-6Al-4V under fretting fatigue at elevated temperature
H Lee et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Effect of laser shock processing on fatigue crack growth and fracture toughness of 6061-T6 aluminum alloy
C Rubio-González et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Numerical simulation of surface deformation and residual stresses fields in laser shock processing experiments
JL Ocaña et al.
APPLIED SURFACE SCIENCE (2004)
Experimental assessment of the influence of irradiation parameters on surface deformation and residual stresses in laser shock processed metallic alloys
JL Ocaña et al.
APPLIED SURFACE SCIENCE (2004)
High temperature fatigue behavior and residual stress stability of laser-shock peened and deep rolled austenitic steel AISI 304
I Nikitin et al.
SCRIPTA MATERIALIA (2004)
Grain size effects on the fatigue response of nanocrystalline metals
T Hanlon et al.
SCRIPTA MATERIALIA (2003)
Three-dimensional dynamic finite element analysis of multiple laser shock peening processes
K Ding et al.
SURFACE ENGINEERING (2003)
On the influence of mechanical surface treatments - deep rolling and laser shock peening - on the fatigue behavior of Ti-6Al-4V at ambient and elevated temperatures
RK Nalla et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
An in situ transmission electron microscope study of the thermal stability of near-surface microstructures induced by deep rolling and laser-shock peening
I Altenberger et al.
SCRIPTA MATERIALIA (2003)
FEM simulation of two sided laser shock peening of thin sections of Ti-6Al-4V alloy
K Ding et al.
SURFACE ENGINEERING (2003)
Laser shock processing and its effects on microstructure and properties of metal alloys: a review
CS Montross et al.
INTERNATIONAL JOURNAL OF FATIGUE (2002)
On the application of the Kitagawa-Takahashi diagram to foreign-object damage and high-cycle fatigue
JO Peters et al.
ENGINEERING FRACTURE MECHANICS (2002)
The air force manufacturing technology laser peening initiative
DW See et al.
SURFACE ENGINEERING (2002)
Introduction of compressive residual stresses in Ti-6Al-4V simulated airfoils via laser shock processing
MJ Shepard et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2001)
High cycle fatigue behavior of Ti-6Al-4V with simulated foreign object damage
S Mall et al.
MECHANICS OF MATERIALS (2001)
Surface prestressing to improve fatigue strength of components by laser shot peening
G Hammersley et al.
OPTICS AND LASERS IN ENGINEERING (2000)
Role of foreign-object damage on thresholds for high-cycle fatigue in Ti-6Al-4V
JO Peters et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2000)
Experimental determination by PVDF and EMV techniques of shock amplitudes induced by 0.6-3 ns laser pulses in a confined regime with water
P Peyre et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2000)