☆ 4.6 Article

Development of Magnetocaloric Microstructures from Equiatomic Iron-Rhodium Nanoparticles through Laser Sintering

ADVANCED ENGINEERING MATERIALS (2023)

Related references

Note: Only part of the references are listed.

Review Materials Science, Multidisciplinary

Review on magnetocaloric high-entropy alloys: Design and analysis methods

Jia Yan Law et al.

Summary: This article discusses the application of high-entropy alloys in optimizing mechanical properties, with specific focus on the design and performance analysis of magnetocaloric HEAs. High-entropy alloys offer wide opportunities for performance exploration, potentially enhancing the reliability of functional alloys.

JOURNAL OF MATERIALS RESEARCH (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Large Refrigerant Capacity Induced by Table-Like Magnetocaloric Effect in High-Entropy Alloys TbDyHoEr

Wei Hao Zhu et al.

Summary: The complex magnetic transition, magnetocaloric effect, refrigerant capacity, and magnetic-phase diagram of single-phase TbDyHoEr high-entropy alloy were investigated. Results showed that the melt-spun treatment significantly improved the refrigerant capacity of TbDyHoEr from 883.19 to 1049.22 J kg(-1) due to complex magnetic transition and ideal table-like magnetocaloric effect. The improved application potential of TbDyHoEr as a high-efficient magnetic refrigeration material and the ideal table-like magnetocaloric effect in a large temperature range enable this material to meet the requirements of cryogenic and mesothermal refrigeration for an Ericsson cycle.

ADVANCED ENGINEERING MATERIALS (2023)

Add to Collection

Article Polymer Science

Unraveling of Advances in 3D-Printed Polymer-Based Bone Scaffolds

Yuanhang Xu et al.

Summary: The repair of large-area irregular bone defects is a complex issue in orthopedic clinical treatment. Among various bone repair scaffolds, 3D printed polymer-based scaffolds show the most promise for clinical applications. This review introduces different 3D printing technologies, bone healing processes, and discusses the characteristics and potential prospects of ideal bone tissue scaffolds. Challenges in this field are also discussed.

POLYMERS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Direct Laser Interference Ink Printing Using Copper Metal-Organic Decomposition Ink for Nanofabrication

Jun-Han Park et al.

Summary: In this study, a nanoscale ink printing technique called direct laser interference ink printing (DLIIP) was developed, enabling the rapid fabrication of nanoscale copper patterns with fine electrical characteristics under ambient conditions.

NANOMATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Printed Zinc Paper Batteries

Peihua Yang et al.

Summary: Paper electronics offer an environmentally sustainable and efficiently manufacturable option. The use of hydrogel reinforced cellulose paper for paper batteries provides high strain tolerance, biodegradability, and remarkable volumetric energy density, making it compatible with flexible circuits and devices. This design allows for the construction of self-powered electronic systems integrating printed paper batteries with solar cells and LEDs.

ADVANCED SCIENCE (2022)

Add to Collection

Article Materials Science, Multidisciplinary

High Quality Inkjet Printed-Emissive Nanocrystalline Perovskite CsPbBr3 Layers for Color Conversion Layer and LEDs Applications

Giovanni Vescio et al.

Summary: Metal halide perovskites (MHPs) with outstanding optical emissive properties can be fabricated by solution processing methods and inkjet printing. The printed layers exhibit high emissive efficiency and stability, making them promising for large-scale production of flexible LEDs.

ADVANCED MATERIALS TECHNOLOGIES (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Microfluidic system manufacturing by direct laser writing for the generation and characterization of microdroplets

Jonathan U. Alvarez-Martinez et al.

Summary: This study proposes a simple and low-cost method for developing microfluidic devices using direct laser writing (DLW) technique. A T-junction microfluidic droplet generator operating in the squeezing regime is manufactured using DLW. The relationship between flow rates, channel sizes, and droplet lengths is investigated through experiments and simulations, and a digital image processing protocol is implemented for validation.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2022)

Add to Collection

Review Nanoscience & Nanotechnology

Materials, physics and systems for multicaloric cooling

Huilong Hou et al.

Summary: The development of multicaloric materials has opened up new avenues for heat extraction and technological applications. With the increasing calls for reducing greenhouse gas emissions and improving energy efficiency, research in alternative cooling and refrigeration technologies is gaining momentum.

NATURE REVIEWS MATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Three-dimensional printing of scaffolds for facial reconstruction

Yuxiao Zhou et al.

Summary: This article summarizes the application of 3D printing technology in craniofacial bone reconstruction. Through layer-by-layer manufacturing techniques, patient-specific craniofacial structures can be produced for esthetic purposes and functional restoration. The article also discusses the remaining hurdles and opportunities for growth in this technology.

MRS BULLETIN (2022)

Add to Collection

Review Chemistry, Physical

Printed Strain Sensors for On-Skin Electronics

Yizong Li et al.

Summary: This review provides an overview of recent advancements in printed strain sensors for on-skin electronics, covering sensing mechanisms, printing techniques, materials, structures, printing processes, and potential applications in healthcare, sports performance monitoring, and human-machine interfaces. The challenges and opportunities for future research in this field are also discussed.

SMALL STRUCTURES (2022)

Add to Collection

Article Engineering, Environmental

Microfluidic synthesis of CsPbBr3/Cs4PbBr6 nanocrystals for inkjet printing of mini-LEDs

Zhen Bao et al.

Summary: In this study, CsPbBr3/Cs4PbBr6 complex nanocrystals were successfully synthesized using a microfluidic system, with a high photoluminescent quantum yield of up to 86.9%. A luminescent ink for inkjet printing was produced, leading to the fabrication of mini-sized color-converted LEDs. This material shows potential for applications in color-converted mini- or micro-LED arrays.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Direct Printing of Nanostructured Holograms on Consumable Substrates

Bader AlQattan et al.

Summary: Printing nanostructured holograms on consumable substrates using laser technology can create rainbow visual diffraction effects on food products. Increasing sugar concentration in syrup can improve diffraction efficiency of holograms and alter diffraction angle.

ACS NANO (2021)

Add to Collection

Article Thermodynamics

Thermal management and temperature uniformity enhancement of electronic devices by micro heat sinks: A review

Ziqiang He et al.

Summary: Micro heat sinks are crucial for addressing the challenges of high heat flux and non-uniform temperature distribution in electronic devices. Developments in thermal enhancement technologies and reducing non-uniform temperature distribution are essential. An effective adaptive cooling method is urgently needed to improve the efficiency and lifespan of electronic components.

ENERGY (2021)

Add to Collection

Article Chemistry, Analytical

Characterization and Comparison of Biodegradable Printed Capacitive Humidity Sensors

Emma Wawrzynek et al.

Summary: This study characterizes and compares the performance of humidity sensors printed on different biodegradable substrates, with paper and starch sensors showing the highest overall sensitivity but longer response and recovery times with significant hysteresis. The relationship between humidity and capacitance across the sensors can be modeled by exponential growth, with different substrates exhibiting unique sensitivities and behaviors.

SENSORS (2021)

Add to Collection

Review Engineering, Manufacturing

Screen-Printed Nickel-Zinc Batteries: A Review of Additive Manufacturing and Evaluation Methods

Muhamad Aiman Nazri et al.

Summary: The article provides comprehensive guidelines for thick-film battery fabrication and characterization, focusing on printed nickel-zinc batteries. It discusses different design approaches, fabrication processes, as well as material and equipment selection criteria. The importance of testing methods and commercial applications of printed electrodes in health and personalized wearable devices are also highlighted.

3D PRINTING AND ADDITIVE MANUFACTURING (2021)

Add to Collection

Article Multidisciplinary Sciences

IoT device fabrication using roll-to-roll printing process

Thanh Huy Phung et al.

Summary: The development of technology has led to the increasing use of wireless and IoT devices, which demand rapid and efficient manufacturing processes. This study demonstrates the fabrication of an IoT device using roll-to-roll printing, reducing production time and costs. The successful deployment of IoT devices opens up the opportunity to expand roll-to-roll fabrication to other flexible and multilayer electronic applications.

SCIENTIFIC REPORTS (2021)

Add to Collection

Article Chemistry, Physical

All-Printed Paper-Based Micro-supercapacitors Using Water-Based Additive-Free Oxidized Single-Walled Carbon Nanotube Pastes

Ajeong Jo et al.

Summary: The study developed all-printed paper-based flexible micro-supercapacitors using water-based additive-free oxidized single-walled carbon nanotube pastes, demonstrating high energy density and superior capacity retention. Photothermal treatment and microporous electrode structure facilitated electrolyte infiltration, enabling successful power supply for a clock.

ACS APPLIED ENERGY MATERIALS (2021)

Add to Collection

Article Multidisciplinary Sciences

Transfer-printed, tandem microscale light-emitting diodes for full-color displays

Lizhu Li et al.

Summary: Inorganic semiconductor-based microscale light-emitting diodes (micro-LEDs) are proposed as the key solution for next-generation, ubiquitous lighting and display systems, with stacked red, green, and blue (RGB) micro-LEDs demonstrating full-color lighting and displays. Prototype arrays of tandem RGB micro-LEDs show enhanced performance and display capabilities, providing a viable path to advanced lighting and display systems.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2021)

Add to Collection

Article Chemistry, Physical

Copper and Nickel Microsensors Produced by Selective Laser Reductive Sintering for Non-Enzymatic Glucose Detection

Ilya I. Tumkin et al.

Summary: Selective laser reductive sintering was used in this study to fabricate sensor-active copper and nickel microstructures for non-enzymatic detection of glucose on glass-ceramic surfaces. The microsensors exhibited calculated sensitivities of 1110 and 2080 mu A mM(-1)center dot cm(-2) for copper and nickel, respectively. The fabricated micropatterns had limits of glucose detection of 0.91 and 2.1 mu M for copper and nickel, and demonstrated good selectivity, long-term stability, and reproducibility.

MATERIALS (2021)

Add to Collection

Article Engineering, Chemical

Thermal Hysteresis Control in Fe49Rh51 Alloy through Annealing Process

Vladimir Rodionov et al.

Summary: The magnetic and transport properties of Fe49Rh51 alloy were studied under different quenching and annealing processes, with an optimal regime identified to observe the desired transition in cyclic conditions. This has potential implications for cooling devices based on magnetocaloric effect.

PROCESSES (2021)

Add to Collection

Review Energy & Fuels

Magnetic Refrigeration Design Technologies: State of the Art and General Perspectives

Ali Alahmer et al.

Summary: This paper provides a comprehensive understanding of various magnetic refrigeration technologies, explores the factors influencing magnetic refrigeration efficiency, and conducts analysis on the characteristics and feasibility of magnetic refrigeration systems.

ENERGIES (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Magnetic flexible tactile sensor via direct ink writing

Xuechun Zhang et al.

Summary: A flexible tactile sensor based on the magnetic field was proposed in this study, which can linearly detect both force and position and perform quick tests in variable patterns. By introducing folding magnetization technology, higher magnetic flux density can be achieved and different sensor designs can be implemented.

SENSORS AND ACTUATORS A-PHYSICAL (2021)

Add to Collection

Correction Multidisciplinary Sciences

Towards laser printing of magnetocaloric structures by inducing a magnetic phase transition in iron-rhodium nanoparticles (vol 11, 13719, 2021)

Ruksan Nadarajah et al.

SCIENTIFIC REPORTS (2021)

Add to Collection

Article Energy & Fuels

Gravure-Printed Conversion/Alloying Anodes for Lithium-Ion Batteries

Maria Montanino et al.

Summary: This study successfully demonstrates the use of gravure printing to prepare high-performance conversion/alloying anodes for lithium-ion batteries, achieving desired mass loading through a multilayer approach and showing comparable results to commonly used tape-casting methods. The high-quality gravure-printed layers exhibit high homogeneity, reproducibility in electrochemical performance, reaching a long cycle life of up to 400 cycles. The results are attributed in part to the ink preparation method involving ball-milling mix of powders for disaggregation and homogenization of starting materials, showcasing the potential of gravure printing in industrial manufacturing of printed batteries and as a useful tool for material research.

ENERGY TECHNOLOGY (2021)

Add to Collection

Review Engineering, Electrical & Electronic

Printed Sensor Technologies for Monitoring Applications in Smart Farming: A Review

Rakiba Rayhana et al.

Summary: Smart farming integrates advanced technologies to increase crop yield and quality, reduce costs, and improve efficiency; sensors play a critical role by providing important information on soil conditions, plant growth, and environmental factors; printed sensors, with their unique features, have gained attention for various applications in smart farming.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Magnetic materials: a journey from finding north to an exciting printed future

K. J. Merazzo et al.

Summary: The potential of printed magnetoactive smart materials, which can be changed by external magnetic fields, is recognized globally. However, the printing of these materials is still in its early stages, facing challenges in design, material sets, and fabrication procedures. The review aims to discuss the integration of printing technologies with magnetoactive materials, highlighting scientific obstacles and proposing ways to overcome limitations for wider application.

MATERIALS HORIZONS (2021)

Add to Collection

Article Biochemical Research Methods

Direct laser writing for cardiac tissue engineering: a microfluidic heart on a chip with integrated transducers

Rachael K. Jayne et al.

Summary: This study presents a microfluidic platform for engineering cardiac microtissues, which applies external pressure waves to generate controllable time-dependent forces and transduces oscillatory forces produced by microtissues into measurable electrical outputs. The authors demonstrate the potential of this platform by studying the response of cardiac microtissues to mechanical loading and pacing.

LAB ON A CHIP (2021)

Add to Collection

Review Engineering, Biomedical

3D printing of tissue engineering scaffolds: a focus on vascular regeneration

Pengju Wang et al.

Summary: Tissue engineering is a novel approach to address tissue repair and organ replacement in regenerative medicine. Recent advances in 3D printing have facilitated the fabrication of vascular scaffolds, leading to promising prospects for tissue vascularization. The review highlights the importance of scaffold-based tissue engineering for vascular regeneration and discusses emerging trends in 3D printing of tissue engineering vascular scaffolds.

BIO-DESIGN AND MANUFACTURING (2021)

Add to Collection

Article Engineering, Mechanical

A high-speed additive manufacturing approach for achieving high printing speed and accuracy

Aamer Nazir et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2020)

Add to Collection

Review Chemistry, Physical

Energy Applications of Magnetocaloric Materials

Andrej Kitanovski

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Plasmonic Seasoning: Giving Color to Desktop Laser 3D Printed Polymers by Highly Dispersed Nanoparticles

Tim Hupfeld et al.

ADVANCED OPTICAL MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Increasing the Size-Selectivity in Laser-Based g/h Liquid Flow Synthesis of Pt and PtPd Nanoparticles for CO and NO Oxidation in Industrial Automotive Exhaust Gas Treatment Benchmarking

S. Dittrich et al.

NANOMATERIALS (2020)

Add to Collection

Article Optics

Highly sensitive magnetic field microsensor based on direct laser writing of fiber-tip optofluidic Fabry-Perot cavity

Dengwei Zhang et al.

APL PHOTONICS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Phase transition and magnetocaloric effect in particulate Fe-Rh alloys

Yutao Cao et al.

JOURNAL OF MATERIALS SCIENCE (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Inkjet Printing of Bioresorbable Materials for Manufacturing Transient Microelectronic Devices

Kalyan Y. Mitra et al.

ADVANCED ENGINEERING MATERIALS (2020)

Add to Collection

Review Chemistry, Physical

Advanced Nanomaterials, Printing Processes, and Applications for Flexible Hybrid Electronics

Sehyun Park et al.

MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Controlling the Oxidation of Magnetic and Electrically Conductive Solid-Solution Iron-Rhodium Nanoparticles Synthesized by Laser Ablation in Liquids

Ruksan Nadarajah et al.

NANOMATERIALS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Nanoparticles Engineering by Pulsed Laser Ablation in Liquids: Concepts and Applications

Enza Fazio et al.

NANOMATERIALS (2020)

Add to Collection

Article Chemistry, Analytical

A novel photolithographic method for fabrication of flexible micro-patterned glucose sensors

Donghee Ma et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Magnetic response of FeRh to static and dynamic disorder

Benedikt Eggert et al.

RSC ADVANCES (2020)

Add to Collection

Article Polymer Science

Fabrication and Characterization of Roll-to-Roll Printed Air-Gap Touch Sensors

Sang Hoon Lee et al.

POLYMERS (2019)

Add to Collection

Article Chemistry, Physical

Application of the exchange-striction model for the calculation of the FeRh alloys magnetic properties

Eduard Valiev et al.

INTERMETALLICS (2019)

Add to Collection

Review Chemistry, Physical

Perspective of Surfactant-free Colloidal Nanoparticles in Heterogeneous Catalysis

Sven Reichenberger et al.

CHEMCATCHEM (2019)

Add to Collection

Article Nanoscience & Nanotechnology

A novel microscale selective laser sintering (μ-SLS) process for the fabrication of microelectronic parts

Nilabh K. Roy et al.

MICROSYSTEMS & NANOENGINEERING (2019)

Add to Collection

Article Engineering, Electrical & Electronic

Transfer printing of semiconductor nanowire lasers

Antonio Hurtado et al.

IET OPTOELECTRONICS (2018)

Add to Collection

Review Thermodynamics

Optimization of thermal design of heat sinks: A review

Hamdi E. Ahmed et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Add to Collection

Review Physics, Applied

Review on Magnetocaloric Effect and Materials

N. Raghu Ram et al.

JOURNAL OF SUPERCONDUCTIVITY AND NOVEL MAGNETISM (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Magnetocaloric materials for refrigeration near room temperature

Anja Waske et al.

MRS BULLETIN (2018)

Add to Collection

Article Optics

Nanoscale welding of multi-walled carbon nanotubes by 1064 nm fiber laser

Yanping Yuan et al.

OPTICS AND LASER TECHNOLOGY (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Two-dimensional materials for miniaturized energy storage devices: from individual devices to smart integrated systems

Panpan Zhang et al.

CHEMICAL SOCIETY REVIEWS (2018)

Add to Collection

Review Physics, Applied

Magnetocaloric materials for energy efficient cooling

Julia Lyubina

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Additive manufacturing of near-net-shape and challenges

Ling Li et al.

SCRIPTA MATERIALIA (2017)

Add to Collection

Article Multidisciplinary Sciences

Inkjet Printing of High Performance Transistors with Micron Order Chemically Set Gaps

Peter Mack Grubb et al.

SCIENTIFIC REPORTS (2017)

Add to Collection

Review Chemistry, Multidisciplinary

Laser Synthesis and Processing of Colloids: Fundamentals and Applications

Dongshi Zhang et al.

CHEMICAL REVIEWS (2017)

Add to Collection

Article Physics, Applied

Influence of structural defects on the magnetocaloric effect in the vicinity of the first order magnetic transition in Fe50.4Rh49.6

V. I. Zverev et al.

APPLIED PHYSICS LETTERS (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Rapid laser sintering of metal nanoparticles inks

Oleg Ermak et al.

NANOTECHNOLOGY (2016)

Add to Collection

Article Chemistry, Analytical

Flexible Holographic Fabrication of 3D Photonic Crystal Templates with Polarization Control through a 3D Printed Reflective Optical Element

David Lowell et al.

MICROMACHINES (2016)

Add to Collection

Editorial Material Chemistry, Physical

Strategies to harvest the unique properties of laser-generated nanomaterials in biomedical and energy applications

Tsuyoshi Asahi et al.

APPLIED SURFACE SCIENCE (2015)

Add to Collection

Article Thermodynamics

Thermal conductivity estimation of inkjet-printed silver nanoparticle ink during continuous wave laser sintering

Jung Hyun Choi et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)

Add to Collection

Article Chemistry, Applied

Effects of the excess iron on phase and magnetocaloric property of LaFe11.6*xSi1.4 alloys

Chen Xiang et al.

JOURNAL OF RARE EARTHS (2015)

Add to Collection

Review Green & Sustainable Science & Technology

Review of micro- and mini-channel heat sinks and heat exchangers for single phase fluids

Tisha Dixit et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)

Add to Collection

Article Chemistry, Physical

Laser Direct Write micro-fabrication of large area electronics on flexible substrates

F. Zacharatos et al.

APPLIED SURFACE SCIENCE (2015)

Add to Collection

Article Physics, Applied

Dependence of the inverse magnetocaloric effect on the field-change rate in Mn3GaC and its relationship to the kinetics of the phase transition

F. Scheibel et al.

JOURNAL OF APPLIED PHYSICS (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Fluctuating local moments, itinerant electrons, and the magnetocaloric effect: Compositional hypersensitivity of FeRh

J. B. Staunton et al.

PHYSICAL REVIEW B (2014)

Add to Collection

Article Engineering, Manufacturing

Characterization of Laser Sintering of Copper Nanoparticle Ink by FEM and Experimental Testing

Juha Niittynen et al.

IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY (2014)

Add to Collection

Article Thermodynamics

The Effect of Nanofluid Concentration on the Cooling System of Vehicles Radiator

M. Ali et al.

ADVANCES IN MECHANICAL ENGINEERING (2014)

Add to Collection

Article Nanoscience & Nanotechnology

Cu2Te solar cells fabricated by printing

Duy-Cuong Nguyen et al.

INTERNATIONAL JOURNAL OF NANOTECHNOLOGY (2013)

Add to Collection

Article Imaging Science & Photographic Technology

Laser Printing Circuit Boards and Electronics

Jason Jones et al.

JOURNAL OF IMAGING SCIENCE AND TECHNOLOGY (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Caloric Effects in Ferroic Materials: New Concepts for Cooling

Sebastian Faehler et al.

ADVANCED ENGINEERING MATERIALS (2012)

Add to Collection

Article Energy & Fuels

Towards 20% efficient large-area screen-printed rear-passivated silicon solar cells

Thorsten Dullweber et al.

PROGRESS IN PHOTOVOLTAICS (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Therapeutic Window for Bioactive Nanocomposites Fabricated by Laser Ablation in Polymer-Doped Organic Liquids

Anne Hahn et al.

ADVANCED ENGINEERING MATERIALS (2010)

Add to Collection

Article Physics, Applied

Synthesis and magnetic properties of self-assembled FeRh nanoparticles

Z. Jia et al.

APPLIED PHYSICS LETTERS (2008)

Add to Collection

Article Chemistry, Physical

One-pot synthesis of core - Shell FeRh nanoparticles

Diana Ciuculescu et al.

CHEMISTRY OF MATERIALS (2007)

Add to Collection

Article Energy & Fuels

Bow in screen-printed back-contact industrial silicon solar cells

Mohamed M. Hilali et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2007)

Add to Collection

Article Physics, Applied

Synthesis and characterization of FeRh nanoparticles

Diana Ciuculescu et al.

MODERN PHYSICS LETTERS B (2007)

Add to Collection

Article Biotechnology & Applied Microbiology

Laser-guided direct writing for three-dimensional tissue engineering

Y Nahmias et al.

BIOTECHNOLOGY AND BIOENGINEERING (2005)

Add to Collection

Article Optics

Direct writing computer-generated holograms on metal film by an infrared femtosecond laser

QZ Zhao et al.

OPTICS EXPRESS (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.