4.7 Article

Intrinsically high thermoelectric performance in near-room-temperature ?-MgAgSb materials

Related references

Note: Only part of the references are listed.
Article Materials Science, Multidisciplinary

Entropy engineering induced exceptional thermoelectric and mechanical performances in Cu2-yAgyTe1-2xSxSex

Zixun Zhang et al.

Summary: This study demonstrates the use of entropy engineering to improve the thermoelectric performance and mechanical properties of multicomponent alloys. By mixing multiple elements and co-alloying, the high-symmetry hexagonal structure is stabilized, phase transition numbers are reduced, and carrier concentration is decreased while the effective mass is enhanced. The entropy engineering strengthening effect also significantly improves the mechanical properties of the materials.

ACTA MATERIALIA (2022)

Article Chemistry, Physical

Achieving High Thermoelectric Performance by NaSbTe2 Alloying in GeTe for Simultaneous Suppression of Ge Vacancies and Band Tailoring

Sichen Duan et al.

Summary: By alloying NaSbTe2 with GeTe, the carrier concentration is reduced and the power factor is improved, leading to higher zT values for improved thermoelectric performance.

ADVANCED ENERGY MATERIALS (2022)

Article Chemistry, Multidisciplinary

Structural Modularization of Cu2Te Leading to High Thermoelectric Performance near the Mott-Ioffe-Regel Limit

Kunpeng Zhao et al.

Summary: Research shows that by alloying iodine and sulfur, the crystal structure of Cu2Te material can be modularized, forming mosaic nanograins and size mismatched sublattices, leading to high thermoelectricity. This material achieves excellent thermoelectric performance near the Mott-Ioffe-Regel limit, providing a new pathway for the design of high-performance thermoelectric materials.

ADVANCED MATERIALS (2022)

Article Materials Science, Multidisciplinary

Chemical stability and degradation mechanism of Mg3Sb2-xBix thermoelectrics towards room-temperature applications

Airan Li et al.

Summary: Mg3Sb2-xBix compounds, known for their low cost and high thermoelectric performance, are found to be sensitive to moisture, leading to degraded thermoelectric properties. The issue can be resolved by eliminating moisture, allowing the materials to maintain stable thermoelectric performance.

ACTA MATERIALIA (2022)

Article Multidisciplinary Sciences

Flexible thermoelectrics based on ductile semiconductors

Qingyu Yang et al.

Summary: A series of high-performance p-type ductile thermoelectric materials based on silver sulfide-based ductile semiconductors has been developed, which show great potential for use in flexible thermoelectric devices. Thin and flexible pi-shaped devices with high power density have been successfully demonstrated.

SCIENCE (2022)

Article Chemistry, Physical

Establishing synthesis-composition-property relationships for enhanced and reproducible thermoelectric properties of MgAgSb

Amandine Duparchy et al.

Summary: The study focuses on improving the synthesis control of alpha-MgAgSb to achieve reproducible high-performance properties. Through phase boundary mapping, it is found that the thermodynamic states of MgAgSb do not significantly affect its thermoelectric performance, while the type and amount of secondary phases play a crucial role.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Article Materials Science, Multidisciplinary

Novel meta-phase arising from large atomic size mismatch

Kunpeng Zhao et al.

Summary: This study reports the discovery of unique metal phases, Cu-2(S,Te), Ag-2(S,Te), and Mg-2(Si,Sn), with a wide composition range. The formation of these metal phases defies the classic Hume-Rothery rule due to mismatched diffusion coefficients, atomic sizes, and electronegativities. The metal phases exhibit highly tunable sublattice order/disorder and possess interesting electronic and thermal properties, suggesting potential applications in materials research and technology.

MATTER (2022)

Article Nanoscience & Nanotechnology

Thermoelectric Ag2Se: Imperfection, Homogeneity, and Reproducibility

Shaoji Huang et al.

Summary: Ag2Se is a high performance thermoelectric material with high carrier mobility and low lattice thermal conductivity, but there has been data discrepancy in evaluating its thermoelectric performance. By studying the preparation methods and introducing a slight excess of selenium, the thermoelectric performance of Ag2Se can be greatly improved.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Physical

Thermoelectric cooling materials

Jun Mao et al.

Summary: Solid-state thermoelectric devices can convert electricity into cooling through the Peltier effect. Commercialization of thermoelectric cooling technology has been based on Bi2Te3 alloys, but with the discovery of more promising materials, there is potential for reshaping the field. This review discusses the current status and future outlook of thermoelectric cooling materials.

NATURE MATERIALS (2021)

Editorial Material Multidisciplinary Sciences

Thermopower and harvesting heat

Xun Shi et al.

SCIENCE (2021)

Article Multidisciplinary Sciences

Towards tellurium-free thermoelectric modules for power generation from low-grade heat

Pingjun Ying et al.

Summary: Thermoelectric technology can convert waste heat into electricity, with great potential for clean power generation. Researchers have successfully increased the conversion efficiency of thermoelectric modules by utilizing Bi2Te3 substitute compounds, demonstrating the feasibility of sustainable elements in high-performance thermoelectric modules.

NATURE COMMUNICATIONS (2021)

Article Chemistry, Multidisciplinary

Ultralow Lattice Thermal Conductivity and Superhigh Thermoelectric Figure-of-Merit in (Mg, Bi) Co-Doped GeTe

Tong Xing et al.

Summary: This study achieved a superhigh thermoelectric figure-of-merit (zT) of approximately 2.5 at 700 K by regulating the (Mg, Bi) co-doping in GeTe. The research found that (Mg, Bi) co-doping can effectively reduce the lattice thermal conductivity of GeTe compounds and introduce additional electrons to optimize carrier concentration, thereby improving the overall thermoelectric performance of the material.

ADVANCED MATERIALS (2021)

Article Chemistry, Physical

On the influence of AgMg precursor formation on MgAgSb microstructure and thermoelectric properties

Ignacio Rodriguez-Barber et al.

Summary: alpha-MgAgSb has been identified as a promising thermoelectric material with peak performance around 300 degrees C. Optimal synthesis of the material can reduce impurities and improve thermoelectric performance.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Chemistry, Physical

Thermoelectric materials with crystal-amorphicity duality induced by large atomic size mismatch

Kunpeng Zhao et al.

Summary: This study presents a novel material series with crystal-amorphicity duality for high-performance thermoelectric materials design. By manipulating the crystal structure, the material exhibits excellent electrical properties and remarkably low lattice thermal conductivities at high temperatures.

JOULE (2021)

Article Chemistry, Physical

Demonstration of ultrahigh thermoelectric efficiency of ∼7.3% in Mg3Sb2/MgAgSb module for low-temperature energy harvesting

Zihang Liu et al.

Summary: Researchers have made significant advancements in thermoelectric materials by adding minor amounts of Cu to the Mg3Sb1.5Bi0.5 system, leading to improved thermoelectric performance and reduced thermal conductivity. Through grain-boundary engineering, the detrimental effects of thermally activated electrical conductivity were successfully eliminated. The fabricated thermoelectric module, when combined with a p-type alpha-MgAgSb-based material, showed promising potential for low-temperature thermoelectric harvesting.

JOULE (2021)

Article Chemistry, Physical

Efficient lanthanide Gd doping promoting the thermoelectric performance of Mg3Sb2-based materials

Jingdan Lei et al.

Summary: Mg3Sb2-based thermoelectric materials show great potential for high thermoelectric performance, but low carrier concentration hinders their development. This study demonstrates that lanthanide Gd can effectively tune the carrier concentration to near optimal levels through doping, while also mitigating grain boundary effects with coarse grain size. The combination of high carrier concentration and suppressed lattice thermal conductivity leads to a maximum zT of 1.55 at 700 K in Mg3.065Sb1.3Bi0.7Gd0.015.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Review Chemistry, Physical

High-Performance GeTe-Based Thermoelectrics: from Materials to Devices

Wei-Di Liu et al.

ADVANCED ENERGY MATERIALS (2020)

Article Multidisciplinary Sciences

Semiconductor glass with superior flexibility and high room temperature thermoelectric performance

Shiyang He et al.

SCIENCE ADVANCES (2020)

Review Chemistry, Multidisciplinary

Advanced Thermoelectric Design: From Materials and Structures to Devices

Xiao-Lei Shi et al.

CHEMICAL REVIEWS (2020)

Article Materials Science, Multidisciplinary

Anion-site-modulated thermoelectric properties in Ge2Sb2Te5-based compounds

Ping Hu et al.

RARE METALS (2020)

Article Multidisciplinary Sciences

Exceptional plasticity in the bulk single-crystalline van der Waals semiconductor InSe

Tian-Ran Wei et al.

SCIENCE (2020)

Article Multidisciplinary Sciences

High thermoelectric cooling performance of n-type Mg3Bi2-based materials

Jun Mao et al.

SCIENCE (2019)

Article Chemistry, Multidisciplinary

Are Cu2Te-Based Compounds Excellent Thermoelectric Materials?

Kunpeng Zhao et al.

ADVANCED MATERIALS (2019)

Article Chemistry, Multidisciplinary

Flexible thermoelectrics: from silver chalcogenides to full-inorganic devices

Jiasheng Liang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Article Chemistry, Multidisciplinary

High thermoelectric performance of alpha-MgAgSb for power generation

Zihang Liu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Article Chemistry, Physical

Room-temperature ductile inorganic semiconductor

Xun Shi et al.

NATURE MATERIALS (2018)

Article Multidisciplinary Sciences

Ag-Mg antisite defect induced high thermoelectric performance of α-MgAgSb

Zhenzhen Feng et al.

SCIENTIFIC REPORTS (2017)

Article Materials Science, Multidisciplinary

Investigation on native defects of α-MgAgSb and its effects on thermoelectric properties using first principles calculations

Zhuoyi Pang et al.

CURRENT APPLIED PHYSICS (2017)

Article Chemistry, Multidisciplinary

Lattice Dislocations Enhancing Thermoelectric PbTe in Addition to Band Convergence

Zhiwei Chen et al.

ADVANCED MATERIALS (2017)

Article Materials Science, Multidisciplinary

The microscopic origin of low thermal conductivity for enhanced thermoelectric performance of Yb doped MgAgSb

Zihang Liu et al.

ACTA MATERIALIA (2017)

Review Chemistry, Multidisciplinary

Compromise and Synergy in High-Efficiency Thermoelectric Materials

Tiejun Zhu et al.

ADVANCED MATERIALS (2017)

Article Materials Science, Multidisciplinary

Effects of antimony content in MgAg0.97Sbx on output power and energy conversion efficiency

Zihang Liu et al.

ACTA MATERIALIA (2016)

Article Multidisciplinary Sciences

Non-equilibrium processing leads to record high thermoelectric figure of merit in PbTe-SrTe

Gangjian Tan et al.

NATURE COMMUNICATIONS (2016)

Article Chemistry, Physical

Lithium Doping to Enhance Thermoelectric Performance of MgAgSb with Weak Electron-Phonon Coupling

Zihang Liu et al.

ADVANCED ENERGY MATERIALS (2016)

Article Chemistry, Physical

Understanding and manipulating the intrinsic point defect in alpha-MgAgSb for higher thermoelectric performance

Zihang Liu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Article Chemistry, Physical

Reduction of thermal conductivity by low energy multi-Einstein optic modes

Huili Liu et al.

JOURNAL OF MATERIOMICS (2016)

Article Materials Science, Multidisciplinary

Effect of Cu concentration on thermoelectric properties of nanostructured p-type MgAg0.97-xCuxSb0.99

Jiehe Sui et al.

ACTA MATERIALIA (2015)

Article Chemistry, Physical

High Performance α-MgAgSb Thermoelectric Materials for Low Temperature Power Generation

Pingjun Ying et al.

CHEMISTRY OF MATERIALS (2015)

Article Multidisciplinary Sciences

Realizing high figure of merit in heavy-band p-type half-Heusler thermoelectric materials

Chenguang Fu et al.

NATURE COMMUNICATIONS (2015)

Article Multidisciplinary Sciences

Ultralow thermal conductivity and high thermoelectric figure of merit in SnSe crystals

Li-Dong Zhao et al.

NATURE (2014)

Article Chemistry, Physical

High thermoelectric performance of MgAgSb-based materials

Huaizhou Zhao et al.

NANO ENERGY (2014)

Review Crystallography

Crystallographic Computing System JANA2006: General features

Vaclav Petricek et al.

ZEITSCHRIFT FUR KRISTALLOGRAPHIE-CRYSTALLINE MATERIALS (2014)

Article Chemistry, Multidisciplinary

Studies on the Bi2Te3-Bi2Se3-Bi2S3 system for mid-temperature thermoelectric energy conversion

Weishu Liu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2013)

Article Chemistry, Multidisciplinary

High thermoelectric performance in tellurium free p-type AgSbSe2

Satya N. Guin et al.

ENERGY & ENVIRONMENTAL SCIENCE (2013)

Article Multidisciplinary Sciences

High-performance bulk thermoelectrics with all-scale hierarchical architectures

Kanishka Biswas et al.

NATURE (2012)

Article Chemistry, Physical

Copper ion liquid-like thermoelectrics

Huili Liu et al.

NATURE MATERIALS (2012)

Article Materials Science, Multidisciplinary

Ab initio determination of crystal structures of the thermoelectric material MgAgSb

Melanie J. Kirkham et al.

PHYSICAL REVIEW B (2012)

Article Chemistry, Physical

Composition and the thermoelectric performance of beta-Zn4Sb3

Eric S. Toberer et al.

JOURNAL OF MATERIALS CHEMISTRY (2010)

Article Chemistry, Multidisciplinary

Evaluation of Half-Heusler Compounds as Thermoelectric Materials Based on the Calculated Electrical Transport Properties

Jiong Yang et al.

ADVANCED FUNCTIONAL MATERIALS (2008)