Related references
Note: Only part of the references are listed.Extreme strain rate deformation of nacre-inspired graphene/copper nanocomposites under laser-induced hypersonic micro-projectile impact
Yifei Peng et al.
COMPOSITES PART B-ENGINEERING (2022)
Effect of grain size on strength and strain rate sensitivity in metals
Roberto B. Figueiredo et al.
JOURNAL OF MATERIALS SCIENCE (2022)
Nanotwinning-assisted dynamic recrystallization at high strains and strain rates
Ahmed A. Tiamiyu et al.
NATURE MATERIALS (2022)
On the origin of kinking in layered crystalline solids
G. Plummer et al.
MATERIALS TODAY (2021)
Damage and self-healing characteristics of monolayer graphene enhanced Cu under ballistic impact
Yong-Chao Wu et al.
MECHANICS OF MATERIALS (2021)
Superlubric polycrystalline graphene interfaces
Xiang Gao et al.
NATURE COMMUNICATIONS (2021)
Exploiting the synergic strengthening effects of stacking faults in carbon nanotubes reinforced aluminum matrix composites for enhanced mechanical properties
Baisong Guo et al.
COMPOSITES PART B-ENGINEERING (2021)
Remarkable anisotropic wear resistance with 100-fold discrepancy in a copper matrix laminated composite with only 0.2 vol% graphene
Guangyuan Lin et al.
ACTA MATERIALIA (2021)
A Comparative Study on Misorientations to Determine the Extent of Recrystallization in Pure ETP Copper
N. Harshavardhana et al.
PHYSICS OF METALS AND METALLOGRAPHY (2021)
Deformation mechanisms and strain rate sensitivity of bimodal and ultrafine-grained copper
J. Bach et al.
ACTA MATERIALIA (2020)
Simultaneously enhanced electrical conductivity and strength in Cu/graphene/Cu sandwiched nanofilm
Zhilei Dong et al.
SCRIPTA MATERIALIA (2020)
Graphene/Cu composites: Electronic and mechanical properties by first-principles calculation
Qian Zhang et al.
MATERIALS CHEMISTRY AND PHYSICS (2019)
Strain Rate Sensitivity and Deformation Mechanism of Carbon Nanotubes Reinforced Aluminum Composites
Xiaowen Fu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2019)
Dynamic Strengthening of Carbon Nanotube Fibers under Extreme Mechanical Impulses
Wanting Xie et al.
NANO LETTERS (2019)
Shock engineering the additive manufactured graphene-metal nanocomposite with high density nanotwins and dislocations for ultra-stable mechanical properties
Dong Lin et al.
ACTA MATERIALIA (2018)
Dynamic recrystallization of titanium: Effect of pre-activated twinning at cryogenic temperature
C. K. Yan et al.
ACTA MATERIALIA (2018)
Strain-rate dependent deformation mechanism of graphene-Al nanolaminated composites studied using micro-pillar compression
Lei Zhao et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
In-situ observations of single micro-particle impact bonding
Mostafa Hassani-Gangaraj et al.
SCRIPTA MATERIALIA (2018)
Adiabatic shear instability is not necessary for adhesion in cold spray
Mostafa Hassani-Gangaraj et al.
ACTA MATERIALIA (2018)
Graphene quality dominated interface deformation behavior of graphene-metal composite: The defective is better
Zan Li et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
Regain Strain-Hardening in High-Strength Metals by Nanofiller Incorporation at Grain Boundaries
Zan Li et al.
NANO LETTERS (2018)
Opposite grain size dependence of strain rate sensitivity of copper at low vs high strain rates
Z. N. Mao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Superlubricity of Graphite Sliding against Graphene Nanoflake under Ultrahigh Contact Pressure
Jinjin Li et al.
ADVANCED SCIENCE (2018)
Melt-driven erosion in microparticle impact
Mostafa Hassani-Gangaraj et al.
NATURE COMMUNICATIONS (2018)
A review on the strain rate dependency of the dynamic viscoplastic response of FCC metals
Francisco C. Salvado et al.
PROGRESS IN MATERIALS SCIENCE (2017)
Enhanced dislocation obstruction in nanolaminated graphene/Cu composite as revealed by stress relaxation experiments
Zan Li et al.
SCRIPTA MATERIALIA (2017)
Dynamics and extreme plasticity of metallic microparticles in supersonic collisions
Wanting Xie et al.
SCIENTIFIC REPORTS (2017)
2D Material Armors Showing Superior Impact Strength of Few Layers
Stefano Signetti et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Aligning graphene in bulk copper: Nacre-inspired nanolaminated architecture coupled with in-situ processing for enhanced mechanical properties and high electrical conductivity
Mu Cao et al.
CARBON (2017)
Strengthening and toughening mechanisms in graphene-Al nanolaminated composite micro-pillars
Siwen Feng et al.
ACTA MATERIALIA (2017)
Shock response of Cu/graphene nanolayered composites
X. J. Long et al.
CARBON (2016)
Dynamic creation and evolution of gradient nanostructure in single-crystal metallic microcubes
Ramathasan Thevamaran et al.
SCIENCE (2016)
High content reduced graphene oxide reinforced copper with a bioinspired nano-laminated structure and large recoverable deformation ability
Ding-Bang Xiong et al.
SCIENTIFIC REPORTS (2016)
Graphene-and-Copper Artificial Nacre Fabricated by a Preform Impregnation Process: Bioinspired Strategy for Strengthening-Toughening of Metal Matrix Composite
Ding-Bang Xiong et al.
ACS NANO (2015)
Temperature effects on the friction characteristics of graphene
Yan Zhang et al.
APPLIED PHYSICS LETTERS (2015)
Unstable stacking faults in submicron/micron Al grammins in multi-SiCp/multi-Al nanocomposite
Wenshu Yang et al.
VACUUM (2015)
Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions
Taku Sakai et al.
PROGRESS IN MATERIALS SCIENCE (2014)
Grain refinement: A mechanism for graphene nanoplatelets to reduce friction and wear of Ni3Al matrix self-lubricating composites
Wenzheng Zhai et al.
WEAR (2014)
Superlubric Sliding of Graphene Nanoflakes on Graphene
Xiaofeng Feng et al.
ACS NANO (2013)
Extreme grain refinement by severe plastic deformation: A wealth of challenging science
Y. Estrin et al.
ACTA MATERIALIA (2013)
Grain size effect on deformation twinning and detwinning
Y. T. Zhu et al.
JOURNAL OF MATERIALS SCIENCE (2013)
Competing regimes of rate dependent plastic flow in ultrafine grained metals
Yannick Champion
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Nanostructured high-strength molybdenum alloys with unprecedented tensile ductility
G. Liu et al.
NATURE MATERIALS (2013)
Compressive behavior and rate-controlling mechanisms of ultrafine grained copper over wide temperature and strain rate ranges
Tao Suo et al.
MECHANICS OF MATERIALS (2013)
Strengthening effect of single-atomic-layer graphene in metal-graphene nanolayered composites
Youbin Kim et al.
NATURE COMMUNICATIONS (2013)
TEMPERATURE AND STRAIN RATE SENSITIVITY OF ULTRAFINE-GRAINED COPPER UNDER UNIAXIAL COMPRESSION
Tao Suo et al.
INTERNATIONAL JOURNAL OF APPLIED MECHANICS (2013)
Deformation twinning in nanocrystalline materials
Y. T. Zhu et al.
PROGRESS IN MATERIALS SCIENCE (2012)
High strain rate deformation of layered nanocomposites
Jae-Hwang Lee et al.
NATURE COMMUNICATIONS (2012)
Impact of debris particles on space structures modeling
N. N. Smirnov et al.
ACTA ASTRONAUTICA (2010)
Shock compression of monocrystalline copper: Experiments, characterization, and analysis
Buyang Cao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
A simple dislocation model of deformation resistance of ultrafine-grained materials explaining Hall-Petch strengthening and enhanced strain rate sensitivity
W. Blum et al.
ACTA MATERIALIA (2009)
Experimental Observations of Stress-Driven Grain Boundary Migration
T. J. Rupert et al.
SCIENCE (2009)
High-strain-rate response of ultra-fine-grained copper
A. Mishra et al.
ACTA MATERIALIA (2008)
What is behind the inverse Hall-Petch effect in nanocrystalline materials?
C. E. Carlton et al.
ACTA MATERIALIA (2007)
Characteristics of face-centered cubic metals processed by equal-channel angular pressing
N. Q. Chinh et al.
JOURNAL OF MATERIALS SCIENCE (2007)
Strain rate effects in the ultrafine grain and nanocrystalline regimes-influence on some constitutive responses
Q. Wei
JOURNAL OF MATERIALS SCIENCE (2007)
Hardness and strain rate sensitivity of nanocrystalline Cu
J Chen et al.
SCRIPTA MATERIALIA (2006)
Grain boundary sliding revisited: Developments in sliding over four decades
TG Langdon
JOURNAL OF MATERIALS SCIENCE (2006)
Length-scale-dependent deformation mechanisms in incoherent metallic multilayered composites
A Misra et al.
ACTA MATERIALIA (2005)
Nano-sized twins induce high rate sensitivity of flow stress in pure copper
L Lu et al.
ACTA MATERIALIA (2005)
Common failures in gas turbine blades
TJ Carter
ENGINEERING FAILURE ANALYSIS (2005)
Effect of nanocrystalline and ultrafine grain sizes on the strain rate sensitivity and activation volume: fcc versus bcc metals
Q Wei et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Enhanced strength and ductility in ultrafine-grained aluminium produced by accumulative roll bonding
HW Höppel et al.
ADVANCED ENGINEERING MATERIALS (2004)
Quasistatic and dynamic compression of aluminum-oxide particle reinforced pure aluminum
C San Marchi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)
An abnormal strain rate effect on tensile behavior in nanocrystalline copper
L Lu et al.
SCRIPTA MATERIALIA (2001)
Share Paper
