☆ 4.8 Article

Unveiling the Nature of Ultrastable Potassium Storage in Bi0.48Sb1.52Se3 Composite

ACS NANO (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

In situ atomic-scale observation of size-dependent (de) potassiation and reversible phase transformation in tetragonal FeSe anodes

Ran Cai et al.

Summary: This study reveals, for the first time, the potassiation/depotassiation mechanisms of tetragonal FeSe nanoflakes in potassium-ion batteries through in situ high-resolution transmission electron microscopy. It is found that the intercalation behavior and structural evolutions differ among nanoflakes of different sizes. Small-sized nanoflakes exhibit better cycling performance with well-maintained structural integrity.

INFOMAT (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Crystal Facet and Architecture Engineering of Metal Oxide Nanonetwork Anodes for High-Performance Potassium Ion Batteries and Hybrid Capacitors

Chao-Hung Chang et al.

Summary: Metal oxide anodes have poor electrochemical performance in potassium ion batteries due to their wide band gaps and deficient ion-transport kinetics. In this study, crystal facet and architecture engineering of metal oxides are used to enhance the potassium ion storage performance. The nanonetwork anodes of bismuth antimonate show outstanding capacity, cycling life, and rate capability. This study proposes a promising avenue to design advanced hierarchical nanostructures for potassium ion batteries and hybrid capacitors.

ACS NANO (2022)

Add to Collection

Article Multidisciplinary Sciences

Carbon-coated MoS1.5Te0.5 nanocables for efficient sodium-ion storage in non-aqueous dual-ion batteries

Yangjie Liu et al.

Summary: A source-template synthetic strategy was used to fabricate carbon-coated nanowire-in-nanotube structures, termed nanocables. Among them, MoS1.5Te0.5@C nanocables showed promising performance as negative electrode active material in dual-ion batteries, with prolonged cycling lifespan and high reversible capacity.

NATURE COMMUNICATIONS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Recent Progress on Sb- and Bi-based Chalcogenide Anodes for Potassium-Ion Batteries

Che-Bin Chang et al.

Summary: In this review, the state-of-the-art antimony and bismuth-based chalcogenide materials for potassium ion batteries are comprehensively summarized, including their reaction mechanism, electrochemical performance, ingenious nanostructures, electrolyte systems, and prospects for future development. This review contributes to the understanding of potassium ion storage mechanisms, the interaction between active materials and electrolytes, and provides guidance and foundation for the design of next-generation high-performance potassium ion batteries.

CHEMISTRY-AN ASIAN JOURNAL (2022)

Add to Collection

Article Chemistry, Physical

Constructing Sb-O-C bond to improve the alloying reaction reversibility of free-standing Sb2Se3 nanorods for potassium-ion batteries

Zihao Yang et al.

Summary: The Sb2Se3 nanorods supported by holey rGO composite membranes exhibit enhanced stability and electrochemical performance in potassium-ion batteries due to the Sb-O-C bonds. The prepared Sb2Se3@h-rGO electrodes show excellent cycling stability and high capacity in PIBs.

NANO ENERGY (2022)

Add to Collection

Article Chemistry, Multidisciplinary

In Situ Atomic-Scale Observation of Electrochemical (De)potassiation in Te Nanowires

Fang Liu et al.

Summary: This study reveals the phase transformations and electrochemical mechanism of tellurium (Te) in potassium-ion batteries (PIBs) using in situ high-resolution transmission electron microscopy and electron diffraction. The results show that the potassium storage in Te is highly reversible, providing implications for the future design of high-performance nanostructured cathodes for PIBs.

SMALL (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Reversible Oxygen-Rich Functional Groups Grafted 3D Honeycomb-Like Carbon Anode for Super-Long Potassium Ion Batteries

Na Cheng et al.

Summary: This study explores the storage mechanism of K+ in carbon-based materials and develops a 3D honeycomb-like carbon with abundant COOH/C = O functional groups as anodes for potassium ion batteries. The optimized electrode demonstrates high reversible capacity, long cycle life, and excellent performance in full cells.

NANO-MICRO LETTERS (2022)

Add to Collection

Article Chemistry, Physical

Carbon skeleton confined Sb chalcogenides nanodots for stable sodium storage

Li Yang et al.

Summary: Antimony-based materials, such as Sb2S3@C and Sb2Se3@C nanodots, show promising potential as anode materials for sodium ion batteries due to their high theoretical capacity. In this study, nanodots with uniform diameters were synthesized and coated with a carbon network to improve conductivity. The Sb2S3@C nanodots exhibited excellent cycling stability after 100 cycles, making them a desirable choice for battery applications.

CARBON (2022)

Add to Collection

Article Chemistry, Physical

Construction of high conductivity carbon-coated MoS2 on porous carbon nanofibers for synergistic potassium storage

Qisheng Zang et al.

Summary: A freestanding anode structure with carbon-coated MoS2 on porous carbon nanofibers was constructed for potassium-ion batteries, showing high conductivity, firm electrode structure, and excellent potassium storage performance. The materials effectively alleviate the volume expansion of MoS2 nanosheets, delivering a high reversible capacity and superior cycle stability.

JOURNAL OF POWER SOURCES (2022)

Add to Collection

Article Chemistry, Physical

Ternary chalcogenide anodes for high-performance potassium-ion batteries and hybrid capacitors via composition-mediated bond softening and intermediate phase

Wei-Cheng Lin et al.

Summary: This study reports composition-tunable ternary chalcogenides that achieve highly reversible potassium-ion storage through synergy between elements. By using a combination of Bi and Sb, the ternary chalcogenide system demonstrates excellent structural stability and a reversible 12-electron transfer reaction during the potassiation/depotassiation process. The engineered ternary chalcogenides show high energy and power density in both batteries and hybrid capacitors. This work highlights the potential of ternary chalcogenides for anode design in potassium-ion storage.

ENERGY STORAGE MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Architectural van der Waals Bi2S3/Bi2Se3 topological heterostructure as a superior potassium-ion storage material

Yi-Yen Hsieh et al.

Summary: In this study, a novel Bi2S3/Bi2Se3 vdWHs heterostructure is designed as an anode material for potassium ion batteries and hybrid capacitors, demonstrating excellent performance and feasibility for practical applications.

ENERGY STORAGE MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Recent status and advanced progress of tip effect induced by micro-nanostructure

Jingwen Li et al.

CHINESE CHEMICAL LETTERS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Recent Progress on the Alloy-Based Anode for Sodium-Ion Batteries and Potassium-Ion Batteries

Keming Song et al.

Summary: High-energy batteries with low cost are urgently needed for large-scale energy storage systems. Alloy-based anodes for sodium-ion batteries (SIBs) and potassium-ion batteries (PIBs) show great potential, but further improvements are necessary for long lifetime and high energy density. This study summarizes the latest progress in alloy-based anodes for SIBs and PIBs, discussing material designs and future research prospects.

SMALL (2021)

Add to Collection

Article Chemistry, Physical

3D ordered macroporous amorphous Nb2O5 as anode material for high-performance sodium-ion batteries

Xiaomin Zhang et al.

Summary: The newly designed 3D ordered amorphous Nb2O5 (3DOM A-Nb2O5) as an anode material for sodium-ion batteries, with rich mesoporous structure and improved electrical conductivity, can enhance the performance of the battery.

APPLIED SURFACE SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

CoPSe: A New Ternary Anode Material for Stable and High-Rate Sodium/Potassium-Ion Batteries

Yutong Feng et al.

Summary: The CoPSe/NC material prepared in this study is an excellent anode material for sodium/potassium-ion batteries, with ultra stability and high rate characteristics, higher theoretical capacity and lower discharge voltage compared to CoSe2. Its outstanding performance is verified through a series of characterizations and calculations.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Stimulating the Reversibility of Sb2S3 Anode for High-Performance Potassium-Ion Batteries

Huiqiao Liu et al.

Summary: A strategy using Nb2O5 layers to confine sulfur species and facilitate reversible sulfide formation was proposed, leading to improved K-ion storage properties in Sb2S3 and SnS2 anodes. This approach demonstrated the highest K-ion diffusion coefficient, longest cycling stability, and excellent rate capability among controlled electrodes, showing potential for developing high-performance sulfides for KIBs.

SMALL (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Recent Progress and Perspectives on Alloying Anodes for Potassium-Ion Batteries

Guoquan Suo et al.

Summary: Potassium-ion batteries (PIBs) are considered a promising alternative to lithium-ion batteries (LIBs) due to the wide distribution, low cost potassium resources, and high working voltage. However, alloying anode materials face challenges such as volume expansion during potassiation/depotassiation, requiring efficient approaches like micro-/nanostructures designing. Research focuses on synthesis strategies, battery performance, working mechanisms, and structure-performance relationships, while future development directions are suggested for high-performance alloy-based anode materials in PIBs.

CHEMNANOMAT (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Progress and perspectives on alloying-type anode materials for advanced potassium-ion batteries

Sumair Imtiaz et al.

Summary: Potassium-ion batteries (PIBs) are seen as promising alternatives to lithium-ion batteries (LIBs) for large-scale electrical energy storage systems due to abundant resources, potential cost advantages, and low redox potential. Research on alloying-type anode materials offers significant prospects for high capacity and durability in PIBs, emphasizing the importance of electrode design and structural engineering for performance enhancement.

MATERIALS TODAY (2021)

Add to Collection

Article Multidisciplinary Sciences

Sb2S3-based conversion-alloying dual mechanism anode for potassium-ion batteries

Shaokun Chong et al.

Summary: The study demonstrates the construction of Sb2S3@rGO@NC as an anode for PIBs, achieving high initial charge capacity and long cycle life. In situ characterizations confirm the electrode undergoes a multi-electron transfer process and the dual mechanisms of K-ion insertion/extraction.

ISCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Dandelion-Like Bi2S3/rGO hierarchical microspheres as high-performance anodes for potassium-ion and half/full sodium-ion batteries

Xiuping Sun et al.

Summary: Sodium-ion batteries (SIBs) and potassium-ion batteries (PIBs) are considered as attractive alternatives for next-generation battery systems due to their promising application potential, however, the design and application of bi-functional high-performance anode still remain a great challenge. In this study, dandelion-like Bi2S3/rGO hierarchical microspheres showed reversible capacity as anode material for PIBs and SIBs, demonstrating high performance even at high current densities. The results indicate that Bi2S3/rGO has application potential as a high-performance bi-functional anode for PIBs and SIBs.

NANO RESEARCH (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Alloyed BiSb Nanoparticles Confined in Tremella-Like Carbon Microspheres for Ultralong-Life Potassium Ion Batteries

Chuyun Huang et al.

Summary: A novel nanoconfined BiSb@TCS structure is designed in this study, effectively addressing the capacity fading and poor rate performance issues of bismuth-antimony alloy in potassium ion batteries, showing outstanding storage performance and great potential as a high-performance anode for potassium ion batteries.

SMALL (2021)

Add to Collection

Article Engineering, Environmental

Sb2S3-Bi2S3 microrods with the combined action of carbon encapsulation and rGO confinement for improving high cycle stability in sodium/potassium storage

Kai Li et al.

Summary: In this study, Sb2S3-Bi2S3 microrods wrapped by carbon sheaths and attached into graphene sheets were successfully designed and constructed to maintain structural stability in sodium ion batteries. The dual structural protection of carbon and rGO encapsulations confined the material within electrochemical reactions to promote cycling performance. The obtained Sb2S3-Bi2S3@C@rGO composite exhibited promising long-term cyclic stability with a specific capacity of 460.5 mA h g(-1) after 1100 cycles at a current density of 8 A g(-1), demonstrating a combined reaction mechanism of conversion and alloying.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Physical

N, P-codoped graphene supported few-layered MoS2 as a long-life and high-rate anode materials for potassium-ion storage

Guangyao Ma et al.

Summary: The layer-structured MoS2 on N, P-codoping reduced graphene oxide (MoS2/N, P-rGO) shows superior performance as an anode material for potassium ion batteries, with high specific capacity, outstanding rate capability, and excellent cycle life. The K-storage reactions of MoS2/N, P-rGO are dominated by pseudo-capacitance, as confirmed by kinetics analysis.

NANO RESEARCH (2021)

Add to Collection

Article Chemistry, Physical

Conversion-alloying dual mechanism anode: Nitrogen-doped carbon-coated Bi2Se3 wrapped with graphene for superior potassium-ion storage

Kuan-Ting Chen et al.

Summary: The construction of an anode material with a conversion-alloying dual mechanism has facilitated the development of high-energy density potassium-ion batteries. The Bi2Se3@NC@rGO composite exhibits excellent electrode integrity and electrochemical kinetics, achieving a high reversible capacity, great rate capability, and ultra-long cycling life. The K-ion full cell assembled using K2Ni[Fe(CN)(6)] cathode also contributes to a high-energy density and excellent cyclability.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Electrolyte modulation of BiPS4 concurrently suppressing the Bi coarsening and polysulfide shuttle effect in K-ion batteries

Safa Haghighat-Shishavan et al.

Summary: Emerging electrode materials for next generation batteries are consciously designed to contain multi-component active materials. Bismuth phosphorus tetrachalcogenide (BiPS4) is introduced as an excellent anode for potassium-ion batteries, which exhibits a tunnel structure for exceptional ion/electron pathways and mechanical integrity. Rational construction of BiPS4-carbon nanotube hybrid and electrolyte modification successfully improve battery performance by hindering detrimental phenomena.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Phase-junction engineering boosts the performance of CoSe2 for efficient sodium/potassium storage

Xiaofeng Li et al.

Summary: This study developed a unique c/o-CoSe2@SiC structure which exhibited excellent sodium and potassium storage performance, and revealed the electrochemical reaction mechanism and structural reversibility. The phase-junction engineering provided a new strategy for developing high-performance SIBs and PIBs.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Bismuth selenide nanosheets confined in thin carbon layers as anode materials for advanced potassium-ion batteries

Xingxing Zhao et al.

Summary: This study successfully utilized bismuth selenide as an anode material for potassium-ion batteries, showing outstanding potassium-ion storage capability and cyclability with the help of a carbon layer coating.

INORGANIC CHEMISTRY FRONTIERS (2021)

Add to Collection

Article Chemistry, Physical

Stable bismuth phosphosulfide nanoparticle encapsulation into hollow multi-channel carbon nanofibers toward high performance sodium storage

Linlin Li et al.

Summary: A facile strategy is proposed to encapsulate bismuth phosphosulfide nanoparticles within hollow multi-channel carbon nanofibers for enhancing the sodium storage properties. The novel composite material shows outstanding cycling stability and high rate performance, making it a competitive candidate anode for sodium ion batteries.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Carbon-coated WS2 nanosheets supported on carbon nanofibers for high-rate potassium-ion capacitors

Shitao Geng et al.

Summary: The carbon-coated WS2 nanosheets supported on carbon nanofibers demonstrate high reversible capacity and rate performance, with an intercalation-conversion reaction mechanism confirmed. First-principles calculations confirm fast K+ diffusion kinetics and high K-adsorption ability for the C-WS2@CNFs anode. The potassium ion capacitor assembled from this anode and activated carbon nanofibers cathode delivers superior energy density, rate capability, and cycle life.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Sulfur-assisted large-scale synthesis of graphene microspheres for superior potassium-ion batteries

Qingfeng Zhang et al.

Summary: A novel sulfur-assisted method was introduced to convert tetraphenyltin into high purity crystalline graphene, resulting in the preparation of three-dimensional few-layer graphene microspheres ideal for energy storage applications. These microspheres exhibited excellent performance and stability, promising scalable production of graphene-based energy storage devices.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Bismuth-Antimony Alloy Nanoparticle@Porous Carbon Nanosheet Composite Anode for High-Performance Potassium-Ion Batteries

Peixun Xiong et al.

ACS NANO (2020)

Add to Collection

Article Engineering, Environmental

Self-wrinkled graphene as a mechanical buffer: A rational design to boost the K-ion storage performance of Sb2Se3 nanoparticles

Zheng Yi et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Si and Ge-Based Anode Materials for Li-, Na-, and K-Ion Batteries: A Perspective from Structure to Electrochemical Mechanism

Laura C. Loaiza et al.

SMALL (2020)

Add to Collection

Article Chemistry, Physical

Surface Amorphization of Vanadium Dioxide (B) for K-Ion Battery

Youpeng Li et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Nature of Novel 2D van der Waals Heterostructures for Superior Potassium Ion Batteries

Jue Wang et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Selenium-Doped Carbon Quantum Dots Act as Broad-Spectrum Antioxidants for Acute Kidney Injury Management

Zachary T. Rosenkrans et al.

ADVANCED SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

Lattice softening enables highly reversible sodium storage in anti-pulverization Bi-Sb alloy/carbon nanofibers

Songtao Guo et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Dual Carbon Potassium-Ion Capacitors: Biomass-Derived Graphene-like Carbon Nanosheet Cathodes

Hong Duc Pham et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

In Situ Atomic-Scale Observation of Reversible Potassium Storage in Sb2S3@Carbon Nanowire Anodes

Yong Cheng et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Advanced Post-Potassium-Ion Batteries as Emerging Potassium-Based Alternatives for Energy Storage

Qianqian Yao et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Engineering, Environmental

Nitrogen-doped carbon nanoboxes as high rate capability and long-life anode materials for high-performance Li-ion capacitors

Jing-Ting Su et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Boosting Potassium Storage by Integration Advantageous of Defect Engineering and Spatial Confinement: A Case Study of Sb2Se3

Binbin Sheng et al.

SMALL (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Boosting potassium-storage performance via the functional design of a heterostructured Bi2S3@RGO composite

Yuhan Liu et al.

NANOSCALE (2020)

Add to Collection

Article Chemistry, Physical

Anion and cation substitution in transition-metal oxides nanosheets for high-performance hybrid supercapacitors

Jinghua Li et al.

NANO ENERGY (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Selenium-Doped Carbon Nanosheets with Strong Electron Cloud Delocalization for Nondeposition of Metal Oxides on Air Cathode of Zinc-Air Battery

Sisi Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Review Multidisciplinary Sciences

Approaching high-performance potassium-ion batteries via advanced design strategies and engineering

Wenchao Zhang et al.

SCIENCE ADVANCES (2019)

Add to Collection

Review Chemistry, Multidisciplinary

In Situ Transmission Electron Microscopy for Energy Materials and Devices

Zheng Fan et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

In Situ Alloying Strategy for Exceptional Potassium Ion Batteries

Jue Wang et al.

ACS NANO (2019)

Add to Collection

Article Chemistry, Physical

Self-templating growth of Sb2Se3@C microtube: a convention-alloying-type anode material for enhanced K-ion batteries

Zheng Yi et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Review Chemistry, Physical

Recent progress in flexible non-lithium based rechargeable batteries

Yang Liu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Recent Progress in Rechargeable Potassium Batteries

Jang-Yeon Hwang et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Inside the Alloy Mechanism of Sb and Bi Electrodes for K-Ion Batteries

Vincent Gabaudan et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2018)

Add to Collection

Article Multidisciplinary Sciences

Boosting potassium-ion batteries by few-layered composite anodes prepared via solution-triggered one-step shear exfoliation

Yajie Liu et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Mechanistic Origin of the High Performance of Yolk@Shell Bi2S3@N-Doped Carbon Nanowire Electrodes

Longze Zhao et al.

ACS NANO (2018)

Add to Collection

Article Chemistry, Physical

Reaction and Capacity-Fading Mechanisms of Tin Nanoparticles in Potassium-Ion Batteries

Qiannan Wang et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2017)

Add to Collection

Review Chemistry, Physical

An Initial Review of the Status of Electrode Materials for Potassium-Ion Batteries

James C. Pramudita et al.

ADVANCED ENERGY MATERIALS (2017)

Add to Collection

Review Chemistry, Multidisciplinary

Self-Assembled Framework Formed During Lithiation of SnS2 Nanoplates Revealed by in Situ Electron Microscopy

Kuibo Yin et al.

ACCOUNTS OF CHEMICAL RESEARCH (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Electrochemistry of Selenium with Sodium and Lithium: Kinetics and Reaction Mechanism

Qianqian Li et al.

ACS NANO (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Potassium-Ion Oxygen Battery Based on a High Capacity Antimony Anode

William D. McCulloch et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Add to Collection

© Peeref 2019-2024. All rights reserved.